* Patches by Xianghua Xiao, 15 Oct 2003:

  - Added Motorola CPU 8540/8560 support (cpu/85xx)
  - Added Motorola MPC8540ADS board support (board/mpc8540ads)
  - Added Motorola MPC8560ADS board support (board/mpc8560ads)

* Minor code cleanup

45 files changed, 2997 insertions, 414 deletions

diff --git a/board/adderII/adderII.h b/board/adderII/adderII.h
index 24e2d93..cf2e673 100644
--- a/board/adderII/adderII.h
+++ b/board/adderII/adderII.h
@@ -41,5 +41,3 @@
  * | 			   |
  * | ...                   |
  *****************************************************************************/
-
-
diff --git a/board/adderII/config.mk b/board/adderII/config.mk
index c23d942..27b3c41 100644
--- a/board/adderII/config.mk
+++ b/board/adderII/config.mk
@@ -26,4 +26,3 @@
 #
 
 TEXT_BASE = 0xFE000000
-
diff --git a/board/adderII/u-boot.lds b/board/adderII/u-boot.lds
index 666e843..cb4d385 100644
--- a/board/adderII/u-boot.lds
+++ b/board/adderII/u-boot.lds
@@ -144,4 +144,3 @@ SECTIONS
   _end = . ;
   PROVIDE (end = .);
 }
-
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index 811f6f8..803c798 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -51,7 +51,7 @@ int gunzip(void *, int, unsigned char *, int *);
 int board_pre_init (void)
 {
 	out32(GPIO0_OR, CFG_NAND0_CE);                 /* set initial outputs     */
-        out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
+	out32(GPIO0_OR, CFG_NAND1_CE);                 /* set initial outputs     */
 
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c
index 110e021..d57c58d 100644
--- a/board/dave/PPChameleonEVB/flash.c
+++ b/board/dave/PPChameleonEVB/flash.c
@@ -46,8 +46,8 @@ unsigned long flash_init (void)
 #else
 	unsigned long size_b0;
 	int i;
-        uint pbcr;
-        unsigned long base_b0;
+	uint pbcr;
+	unsigned long base_b0;
 	int size_val = 0;
 
 	/* Init: no FLASHes known */
@@ -64,14 +64,14 @@ unsigned long flash_init (void)
 			size_b0, size_b0<<20);
 	}
 
-        /* Setup offsets */
-        flash_get_offsets (-size_b0, &flash_info[0]);
+	/* Setup offsets */
+	flash_get_offsets (-size_b0, &flash_info[0]);
 
-        /* Re-do sizing to get full correct info */
-        mtdcr(ebccfga, pb0cr);
-        pbcr = mfdcr(ebccfgd);
-        mtdcr(ebccfga, pb0cr);
-        base_b0 = -size_b0;
+	/* Re-do sizing to get full correct info */
+	mtdcr(ebccfga, pb0cr);
+	pbcr = mfdcr(ebccfgd);
+	mtdcr(ebccfga, pb0cr);
+	base_b0 = -size_b0;
 	switch (size_b0) {
 	case 1 << 20:
 		size_val = 0;
@@ -90,15 +90,15 @@ unsigned long flash_init (void)
 		break;
 	}
 	pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
-        mtdcr(ebccfgd, pbcr);
+	mtdcr(ebccfgd, pbcr);
 
-        /* Monitor protection ON by default */
-        (void)flash_protect(FLAG_PROTECT_SET,
-                            -CFG_MONITOR_LEN,
-                            0xffffffff,
-                            &flash_info[0]);
+	/* Monitor protection ON by default */
+	(void)flash_protect(FLAG_PROTECT_SET,
+			    -CFG_MONITOR_LEN,
+			    0xffffffff,
+			    &flash_info[0]);
 
-        flash_info[0].size = size_b0;
+	flash_info[0].size = size_b0;
 
 	return (size_b0);
 #endif
diff --git a/board/dave/common/flash.c b/board/dave/common/flash.c
index 3cdbaa9..feea093 100644
--- a/board/dave/common/flash.c
+++ b/board/dave/common/flash.c
@@ -40,11 +40,11 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 	short n;
 
 	/* set up sector start address table */
-        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
 	    for (i = 0; i < info->sector_count; i++)
 		info->start[i] = base + (i * 0x00010000);
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
@@ -58,7 +58,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 			base += 64 << 10;
 			++i;
 		}
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
@@ -75,7 +75,7 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-        } else {
+	} else {
 	    if (info->flash_id & FLASH_BTYPE) {
 		/* set sector offsets for bottom boot block type	*/
 		info->start[0] = base + 0x00000000;
@@ -103,10 +103,10 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 void flash_print_info  (flash_info_t *info)
 {
 	int i;
-        int k;
-        int size;
-        int erased;
-        volatile unsigned long *flash;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
 
 	if (info->flash_id == FLASH_UNKNOWN) {
 		printf ("missing or unknown FLASH type\n");
@@ -164,28 +164,28 @@ void flash_print_info  (flash_info_t *info)
 	printf ("  Sector Start Addresses:");
 	for (i=0; i<info->sector_count; ++i) {
 #ifdef CFG_FLASH_EMPTY_INFO
-                /*
-                 * Check if whole sector is erased
-                 */
-                if (i != (info->sector_count-1))
-                  size = info->start[i+1] - info->start[i];
-                else
-                  size = info->start[0] + info->size - info->start[i];
-                erased = 1;
-                flash = (volatile unsigned long *)info->start[i];
-                size = size >> 2;        /* divide by 4 for longword access */
-                for (k=0; k<size; k++)
-                  {
-                    if (*flash++ != 0xffffffff)
-                      {
-                        erased = 0;
-                        break;
-                      }
-                  }
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count-1))
+		  size = info->start[i+1] - info->start[i];
+		else
+		  size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;        /* divide by 4 for longword access */
+		for (k=0; k<size; k++)
+		  {
+		    if (*flash++ != 0xffffffff)
+		      {
+			erased = 0;
+			break;
+		      }
+		  }
 
 		if ((i % 5) == 0)
 			printf ("\n   ");
-                /* print empty and read-only info */
+		/* print empty and read-only info */
 		printf (" %08lX%s%s",
 			info->start[i],
 			erased ? " E" : "  ",
@@ -219,7 +219,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	short n;
 	CFG_FLASH_WORD_SIZE value;
 	ulong base = (ulong)addr;
-        volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)addr;
 
 	/* Write auto select command: read Manufacturer ID */
 	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
@@ -288,42 +288,42 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		break;				/* => 2 MB		*/
 
 	case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
-	        info->flash_id += FLASH_STMW320DT;
-	        info->sector_count = 67;
+		info->flash_id += FLASH_STMW320DT;
+		info->sector_count = 67;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
-	        info->flash_id += FLASH_AM320T;
-	        info->sector_count = 71;
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
-	        info->flash_id += FLASH_AM320B;
+		info->flash_id += FLASH_AM320B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322T:
-	        info->flash_id += FLASH_AMDL322T;
-	        info->sector_count = 71;
+		info->flash_id += FLASH_AMDL322T;
+		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL322B:
-	        info->flash_id += FLASH_AMDL322B;
+		info->flash_id += FLASH_AMDL322B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323T:
-	        info->flash_id += FLASH_AMDL323T;
+		info->flash_id += FLASH_AMDL323T;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_DL323B:
-	        info->flash_id += FLASH_AMDL323B;
+		info->flash_id += FLASH_AMDL323B;
 		info->sector_count = 71;
 		info->size = 0x00400000;  break;	/* => 4 MB	*/
 
 	case (CFG_FLASH_WORD_SIZE)AMD_ID_LV640U:
-	        info->flash_id += FLASH_AM640U;
+		info->flash_id += FLASH_AM640U;
 		info->sector_count = 128;
 		info->size = 0x00800000;  break;	/* => 8 MB	*/
 
@@ -346,11 +346,11 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	}
 
 	/* set up sector start address table */
-        if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
 	    ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U)) {
 	    for (i = 0; i < info->sector_count; i++)
 		info->start[i] = base + (i * 0x00010000);
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324B)) {
@@ -364,7 +364,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			base += 64 << 10;
 			++i;
 		}
-        } else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
+	} else if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL322T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL323T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
 		   ((info->flash_id & FLASH_TYPEMASK) == FLASH_AMDL324T)) {
@@ -381,13 +381,13 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-        } else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
 		/* set sector offsets for top boot block type		*/
 		base += info->size;
 		i = info->sector_count;
-                /*  1 x 16k boot sector */
+		/*  1 x 16k boot sector */
 		base -= 16 << 10;
-                --i;
+		--i;
 		info->start[i] = base;
 		/*  2 x 8k  boot sectors */
 		for (n=0; n<2; ++n) {
@@ -395,9 +395,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-                /*  1 x 32k boot sector */
+		/*  1 x 32k boot sector */
 		base -= 32 << 10;
-                --i;
+		--i;
 		info->start[i] = base;
 
 		while (i > 0) {			/* 64k regular sectors	*/
@@ -405,7 +405,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 			--i;
 			info->start[i] = base;
 		}
-        } else {
+	} else {
 	    if (info->flash_id & FLASH_BTYPE) {
 		/* set sector offsets for bottom boot block type	*/
 		info->start[0] = base + 0x00000000;
@@ -432,10 +432,10 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
 		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
-                if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-                  info->protect[i] = 0;
-                else
-                  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+		  info->protect[i] = 0;
+		else
+		  info->protect[i] = addr2[CFG_FLASH_READ2] & 1;
 	}
 
 	/*
@@ -459,7 +459,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	volatile CFG_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	ulong start, now, last;
-        int i;
+	int i;
 
 	if ((s_first < 0) || (s_first > s_last)) {
 		if (info->flash_id == FLASH_UNKNOWN) {
@@ -498,25 +498,25 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	for (sect = s_first; sect<=s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
 		    addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[sect]);
-                    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                        addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-                        addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                        addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                        addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
-                        for (i=0; i<50; i++)
-                          udelay(1000);  /* wait 1 ms */
-                    } else {
-                        if (sect == s_first) {
-                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                            addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
-                            addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-                            addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-                        }
-                        addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-                    }
+		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+			addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00500050;  /* block erase */
+			for (i=0; i<50; i++)
+			  udelay(1000);  /* wait 1 ms */
+		    } else {
+			if (sect == s_first) {
+			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00800080;
+			    addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+			    addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+			}
+			addr2[0] = (CFG_FLASH_WORD_SIZE)0x00300030;  /* sector erase */
+		    }
 		    l_sect = sect;
 		}
 	}
@@ -637,42 +637,42 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_word (flash_info_t *info, ulong dest, ulong data)
 {
-        volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
-        volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
-        volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *)(info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *)dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *)&data;
 	ulong start;
 	int flag;
-        int i;
+	int i;
 
 	/* Check if Flash is (sufficiently) erased */
 	if ((*((volatile CFG_FLASH_WORD_SIZE *)dest) &
-             (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
+	     (CFG_FLASH_WORD_SIZE)data) != (CFG_FLASH_WORD_SIZE)data) {
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
 	flag = disable_interrupts();
 
-        for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
-          {
-            addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
-            addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
-            addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
-
-            dest2[i] = data2[i];
-
-            /* re-enable interrupts if necessary */
-            if (flag)
-              enable_interrupts();
-
-            /* data polling for D7 */
-            start = get_timer (0);
-            while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
-                   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
-              if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-                return (1);
-              }
-            }
-          }
+	for (i=0; i<4/sizeof(CFG_FLASH_WORD_SIZE); i++)
+	  {
+	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00AA00AA;
+	    addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE)0x00550055;
+	    addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE)0x00A000A0;
+
+	    dest2[i] = data2[i];
+
+	    /* re-enable interrupts if necessary */
+	    if (flag)
+	      enable_interrupts();
+
+	    /* data polling for D7 */
+	    start = get_timer (0);
+	    while ((dest2[i] & (CFG_FLASH_WORD_SIZE)0x00800080) !=
+		   (data2[i] & (CFG_FLASH_WORD_SIZE)0x00800080)) {
+	      if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+		return (1);
+	      }
+	    }
+	  }
 
 	return (0);
 }
diff --git a/board/dave/common/fpga.c b/board/dave/common/fpga.c
index 9547325..5b5b5e9 100644
--- a/board/dave/common/fpga.c
+++ b/board/dave/common/fpga.c
@@ -57,16 +57,16 @@
 #define SET_FPGA(data)         out32(GPIO0_OR, data)
 
 #define FPGA_WRITE_1 {                                                    \
-        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
 
 #define FPGA_WRITE_0 {                                                    \
-        SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-        SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
-        SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
+	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
+	SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
+	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1  */
 
 #if 0
 static int fpga_boot (unsigned char *fpgadata, int size)
diff --git a/board/dbau1x00/memsetup.S b/board/dbau1x00/memsetup.S
index 34ba2da..6c61e6f 100644
--- a/board/dbau1x00/memsetup.S
+++ b/board/dbau1x00/memsetup.S
@@ -9,17 +9,17 @@
 memsetup:
 	/* First setup pll:s to make serial work ok */
 	/* We have a 12 MHz crystal */
-        li              t0, SYS_CPUPLL
-        li              t1, 0x21 /* 396 MHz */
-        sw              t1, 0(t0)
-        sync
-        nop
+	li              t0, SYS_CPUPLL
+	li              t1, 0x21 /* 396 MHz */
+	sw              t1, 0(t0)
+	sync
+	nop
 
-        /* Setup AUX PLL */
+	/* Setup AUX PLL */
 	li              t0, SYS_AUXPLL
 	li              t1, 8 /* 96 MHz */
-        sw              t1, 0(t0) /* aux pll */
-        sync
+	sw              t1, 0(t0) /* aux pll */
+	sync
 
 /* SDCS 0,1 SDRAM */
 	li		t0, MEM_SDMODE0
diff --git a/board/dk1c20/config.mk b/board/dk1c20/config.mk
index 12c74e6..d200715 100644
--- a/board/dk1c20/config.mk
+++ b/board/dk1c20/config.mk
@@ -27,4 +27,3 @@ TEXT_BASE = 0x018c0000
 ifeq ($(debug),1)
 PLATFORM_CPPFLAGS += -DDEBUG
 endif
-
diff --git a/board/dk1c20/u-boot.lds b/board/dk1c20/u-boot.lds
index beedd54..a7d35af 100644
--- a/board/dk1c20/u-boot.lds
+++ b/board/dk1c20/u-boot.lds
@@ -33,17 +33,17 @@ SECTIONS
 	  cpu/nios/start.o (.text)
 	  *(.text)
 	}
-        __text_end = .;
+	__text_end = .;
 
-        . = ALIGN(4);
-        .rodata :
+	. = ALIGN(4);
+	.rodata :
 	{
 		*(.rodata)
 	}
 	__rodata_end = .;
 
-        . = ALIGN(4);
-        .data :
+	. = ALIGN(4);
+	.data :
 	{
 		*(.data)
 	}
@@ -59,12 +59,11 @@ SECTIONS
 	__u_boot_cmd_end = .;
 
 	__bss_start = .;
-        . = ALIGN(4);
-        .bss :
+	. = ALIGN(4);
+	.bss :
 	{
 		*(.bss)
 	}
 	. = ALIGN(4);
 	__bss_end = .;
 }
-
diff --git a/board/dk1c20/vectors.S b/board/dk1c20/vectors.S
index e2baaf5..7094eb6 100644
--- a/board/dk1c20/vectors.S
+++ b/board/dk1c20/vectors.S
@@ -120,5 +120,3 @@ _vectors:
 	.long	_def_xhandler@h		/* Vector 61 */
 	.long	_def_xhandler@h		/* Vector 62 */
 	.long	_def_xhandler@h		/* Vector 63 */
-
-
diff --git a/board/esd/common/xilinx_jtag/lenval.c b/board/esd/common/xilinx_jtag/lenval.c
index a18a16e..7316266 100644
--- a/board/esd/common/xilinx_jtag/lenval.c
+++ b/board/esd/common/xilinx_jtag/lenval.c
@@ -64,7 +64,7 @@ long value( lenVal*     plvValue )
  * Returns:      void.
  *****************************************************************************/
 void initLenVal( lenVal*    plv,
-                 long       lValue )
+		 long       lValue )
 {
 	plv->len    = 1;
 	plv->val[0] = (unsigned char)lValue;
@@ -79,8 +79,8 @@ void initLenVal( lenVal*    plv,
  * Returns:      short   - 0 = mismatch; 1 = equal.
  *****************************************************************************/
 short EqualLenVal( lenVal*  plvTdoExpected,
-                   lenVal*  plvTdoCaptured,
-                   lenVal*  plvTdoMask )
+		   lenVal*  plvTdoCaptured,
+		   lenVal*  plvTdoMask )
 {
 	short           sEqual;
 	short           sIndex;
@@ -120,8 +120,8 @@ short EqualLenVal( lenVal*  plvTdoExpected,
  * Returns:      short   - the bit value.
  *****************************************************************************/
 short RetBit( lenVal*   plv,
-              int       iByte,
-              int       iBit )
+	      int       iByte,
+	      int       iBit )
 {
 	/* assert( ( iByte >= 0 ) && ( iByte < plv->len ) ); */
 	/* assert( ( iBit >= 0 ) && ( iBit < 8 ) ); */
@@ -139,9 +139,9 @@ short RetBit( lenVal*   plv,
  * Returns:      void.
  *****************************************************************************/
 void SetBit( lenVal*    plv,
-             int        iByte,
-             int        iBit,
-             short      sVal )
+	     int        iByte,
+	     int        iBit,
+	     short      sVal )
 {
 	unsigned char   ucByteVal;
 	unsigned char   ucBitMask;
@@ -166,8 +166,8 @@ void SetBit( lenVal*    plv,
  * Returns:      void.
  *****************************************************************************/
 void addVal( lenVal*    plvResVal,
-             lenVal*    plvVal1,
-             lenVal*    plvVal2 )
+	     lenVal*    plvVal1,
+	     lenVal*    plvVal2 )
 {
 	unsigned char   ucCarry;
 	unsigned short  usSum;
@@ -204,7 +204,7 @@ void addVal( lenVal*    plvResVal,
  * Returns:      void.
  *****************************************************************************/
 void readVal( lenVal*   plv,
-              short     sNumBytes )
+	      short     sNumBytes )
 {
 	unsigned char*  pucVal;
 
diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c
index f21c235..318f229 100644
--- a/board/esd/common/xilinx_jtag/micro.c
+++ b/board/esd/common/xilinx_jtag/micro.c
@@ -114,20 +114,20 @@ extern int filesize;
 
 #ifdef  DEBUG_MODE
 #define XSVFDBG_PRINTF(iDebugLevel,pzFormat) \
-                { if ( xsvf_iDebugLevel >= iDebugLevel ) \
-                    printf( pzFormat ); }
+		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
+		    printf( pzFormat ); }
 #define XSVFDBG_PRINTF1(iDebugLevel,pzFormat,arg1) \
-                { if ( xsvf_iDebugLevel >= iDebugLevel ) \
-                    printf( pzFormat, arg1 ); }
+		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
+		    printf( pzFormat, arg1 ); }
 #define XSVFDBG_PRINTF2(iDebugLevel,pzFormat,arg1,arg2) \
-                { if ( xsvf_iDebugLevel >= iDebugLevel ) \
-                    printf( pzFormat, arg1, arg2 ); }
+		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
+		    printf( pzFormat, arg1, arg2 ); }
 #define XSVFDBG_PRINTF3(iDebugLevel,pzFormat,arg1,arg2,arg3) \
-                { if ( xsvf_iDebugLevel >= iDebugLevel ) \
-                    printf( pzFormat, arg1, arg2, arg3 ); }
+		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
+		    printf( pzFormat, arg1, arg2, arg3 ); }
 #define XSVFDBG_PRINTLENVAL(iDebugLevel,plenVal) \
-                { if ( xsvf_iDebugLevel >= iDebugLevel ) \
-                    xsvfPrintLenVal(plenVal); }
+		{ if ( xsvf_iDebugLevel >= iDebugLevel ) \
+		    xsvfPrintLenVal(plenVal); }
 #else   /* !DEBUG_MODE */
 #define XSVFDBG_PRINTF(iDebugLevel,pzFormat)
 #define XSVFDBG_PRINTF1(iDebugLevel,pzFormat,arg1)
@@ -327,68 +327,68 @@ TXsvfDoCmdFuncPtr   xsvf_pfDoCmd[]  =
 #ifdef  DEBUG_MODE
 char* xsvf_pzCommandName[]  =
 {
-        "XCOMPLETE",
-        "XTDOMASK",
-        "XSIR",
-        "XSDR",
-        "XRUNTEST",
-        "Reserved5",
-        "Reserved6",
-        "XREPEAT",
-        "XSDRSIZE",
-        "XSDRTDO",
-        "XSETSDRMASKS",
-        "XSDRINC",
-        "XSDRB",
-        "XSDRC",
-        "XSDRE",
-        "XSDRTDOB",
-        "XSDRTDOC",
-        "XSDRTDOE",
-        "XSTATE",
-        "XENDIR",
-        "XENDDR",
-        "XSIR2",
-        "XCOMMENT",
-        "XWAIT"
+	"XCOMPLETE",
+	"XTDOMASK",
+	"XSIR",
+	"XSDR",
+	"XRUNTEST",
+	"Reserved5",
+	"Reserved6",
+	"XREPEAT",
+	"XSDRSIZE",
+	"XSDRTDO",
+	"XSETSDRMASKS",
+	"XSDRINC",
+	"XSDRB",
+	"XSDRC",
+	"XSDRE",
+	"XSDRTDOB",
+	"XSDRTDOC",
+	"XSDRTDOE",
+	"XSTATE",
+	"XENDIR",
+	"XENDDR",
+	"XSIR2",
+	"XCOMMENT",
+	"XWAIT"
 };
 
 char*   xsvf_pzErrorName[]  =
 {
-        "No error",
-        "ERROR:  Unknown",
-        "ERROR:  TDO mismatch",
-        "ERROR:  TDO mismatch and exceeded max retries",
-        "ERROR:  Unsupported XSVF command",
-        "ERROR:  Illegal state specification",
-        "ERROR:  Data overflows allocated MAX_LEN buffer size"
+	"No error",
+	"ERROR:  Unknown",
+	"ERROR:  TDO mismatch",
+	"ERROR:  TDO mismatch and exceeded max retries",
+	"ERROR:  Unsupported XSVF command",
+	"ERROR:  Illegal state specification",
+	"ERROR:  Data overflows allocated MAX_LEN buffer size"
 };
 
 char*   xsvf_pzTapState[] =
 {
-        "RESET",        /* 0x00 */
-        "RUNTEST/IDLE", /* 0x01 */
-        "DRSELECT",     /* 0x02 */
-        "DRCAPTURE",    /* 0x03 */
-        "DRSHIFT",      /* 0x04 */
-        "DREXIT1",      /* 0x05 */
-        "DRPAUSE",      /* 0x06 */
-        "DREXIT2",      /* 0x07 */
-        "DRUPDATE",     /* 0x08 */
-        "IRSELECT",     /* 0x09 */
-        "IRCAPTURE",    /* 0x0A */
-        "IRSHIFT",      /* 0x0B */
-        "IREXIT1",      /* 0x0C */
-        "IRPAUSE",      /* 0x0D */
-        "IREXIT2",      /* 0x0E */
-        "IRUPDATE"      /* 0x0F */
+	"RESET",        /* 0x00 */
+	"RUNTEST/IDLE", /* 0x01 */
+	"DRSELECT",     /* 0x02 */
+	"DRCAPTURE",    /* 0x03 */
+	"DRSHIFT",      /* 0x04 */
+	"DREXIT1",      /* 0x05 */
+	"DRPAUSE",      /* 0x06 */
+	"DREXIT2",      /* 0x07 */
+	"DRUPDATE",     /* 0x08 */
+	"IRSELECT",     /* 0x09 */
+	"IRCAPTURE",    /* 0x0A */
+	"IRSHIFT",      /* 0x0B */
+	"IREXIT1",      /* 0x0C */
+	"IRPAUSE",      /* 0x0D */
+	"IREXIT2",      /* 0x0E */
+	"IRUPDATE"      /* 0x0F */
 };
 #endif  /* DEBUG_MODE */
 
-//#ifdef DEBUG_MODE
-//    FILE* in;   /* Legacy DEBUG_MODE file pointer */
+/*#ifdef DEBUG_MODE	*/
+/*    FILE* in;   /XXX* Legacy DEBUG_MODE file pointer */
 int xsvf_iDebugLevel;
-//#endif /* DEBUG_MODE */
+/*#endif /XXX* DEBUG_MODE */
 
 /*============================================================================
  * Utility Functions
@@ -493,7 +493,7 @@ void xsvfTmsTransition( short sTms )
  * Returns:      int             - 0 = success; otherwise error.
  *****************************************************************************/
 int xsvfGotoTapState( unsigned char*   pucTapState,
-                      unsigned char    ucTargetState )
+		      unsigned char    ucTargetState )
 {
 	int i;
 	int iErrorCode;
@@ -708,9 +708,9 @@ int xsvfGotoTapState( unsigned char*   pucTapState,
  * Returns:      void.
  *****************************************************************************/
 void xsvfShiftOnly( long    lNumBits,
-                    lenVal* plvTdi,
-                    lenVal* plvTdoCaptured,
-                    int     iExitShift )
+		    lenVal* plvTdi,
+		    lenVal* plvTdoCaptured,
+		    int     iExitShift )
 {
 	unsigned char*  pucTdi;
 	unsigned char*  pucTdo;
@@ -796,15 +796,15 @@ void xsvfShiftOnly( long    lNumBits,
  *               is NOT all zeros and sMatch==1.
  *****************************************************************************/
 int xsvfShift( unsigned char*   pucTapState,
-               unsigned char    ucStartState,
-               long             lNumBits,
-               lenVal*          plvTdi,
-               lenVal*          plvTdoCaptured,
-               lenVal*          plvTdoExpected,
-               lenVal*          plvTdoMask,
-               unsigned char    ucEndState,
-               long             lRunTestTime,
-               unsigned char    ucMaxRepeat )
+	       unsigned char    ucStartState,
+	       long             lNumBits,
+	       lenVal*          plvTdi,
+	       lenVal*          plvTdoCaptured,
+	       lenVal*          plvTdoExpected,
+	       lenVal*          plvTdoMask,
+	       unsigned char    ucEndState,
+	       long             lRunTestTime,
+	       unsigned char    ucMaxRepeat )
 {
 	int             iErrorCode;
 	int             iMismatch;
@@ -935,15 +935,15 @@ int xsvfShift( unsigned char*   pucTapState,
  * Returns:      int                 - 0 = success; otherwise TDO mismatch.
  *****************************************************************************/
 int xsvfBasicXSDRTDO( unsigned char*    pucTapState,
-                      long              lShiftLengthBits,
-                      short             sShiftLengthBytes,
-                      lenVal*           plvTdi,
-                      lenVal*           plvTdoCaptured,
-                      lenVal*           plvTdoExpected,
-                      lenVal*           plvTdoMask,
-                      unsigned char     ucEndState,
-                      long              lRunTestTime,
-                      unsigned char     ucMaxRepeat )
+		      long              lShiftLengthBits,
+		      short             sShiftLengthBytes,
+		      lenVal*           plvTdi,
+		      lenVal*           plvTdoCaptured,
+		      lenVal*           plvTdoExpected,
+		      lenVal*           plvTdoMask,
+		      unsigned char     ucEndState,
+		      long              lRunTestTime,
+		      unsigned char     ucMaxRepeat )
 {
 	readVal( plvTdi, sShiftLengthBytes );
 	if ( plvTdoExpected )
@@ -968,9 +968,9 @@ int xsvfBasicXSDRTDO( unsigned char*    pucTapState,
  *****************************************************************************/
 #ifdef  XSVF_SUPPORT_COMPRESSION
 void xsvfDoSDRMasking( lenVal*  plvTdi,
-                       lenVal*  plvNextData,
-                       lenVal*  plvAddressMask,
-                       lenVal*  plvDataMask )
+		       lenVal*  plvNextData,
+		       lenVal*  plvAddressMask,
+		       lenVal*  plvDataMask )
 {
 	int             i;
 	unsigned char   ucTdi;
diff --git a/board/esd/common/xilinx_jtag/micro.h b/board/esd/common/xilinx_jtag/micro.h
index a68c8d1..3c463ab 100644
--- a/board/esd/common/xilinx_jtag/micro.h
+++ b/board/esd/common/xilinx_jtag/micro.h
@@ -1,64 +1,64 @@
-/*

- * (C) Copyright 2003

- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com

- *

- * See file CREDITS for list of people who contributed to this

- * project.

- *

- * This program is free software; you can redistribute it and/or

- * modify it under the terms of the GNU General Public License as

- * published by the Free Software Foundation; either version 2 of

- * the License, or (at your option) any later version.

- *

- * This program is distributed in the hope that it will be useful,

- * but WITHOUT ANY WARRANTY; without even the implied warranty of

- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

- * GNU General Public License for more details.

- *

- * You should have received a copy of the GNU General Public License

- * along with this program; if not, write to the Free Software

- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

- * MA 02111-1307 USA

- */

-

-/*****************************************************************************

- * File:         micro.h

- * Description:  This header file contains the function prototype to the

- *               primary interface function for the XSVF player.

- * Usage:        FIRST - PORTS.C

- *               Customize the ports.c function implementations to establish

- *               the correct protocol for communicating with your JTAG ports

- *               (setPort() and readTDOBit()) and tune the waitTime() delay

- *               function.  Also, establish access to the XSVF data source

- *               in the readByte() function.

- *               FINALLY - Call xsvfExecute().

- *****************************************************************************/

-#ifndef XSVF_MICRO_H

-#define XSVF_MICRO_H

-

-/* Legacy error codes for xsvfExecute from original XSVF player v2.0 */

-#define XSVF_LEGACY_SUCCESS 1

-#define XSVF_LEGACY_ERROR   0

-

-/* 4.04 [NEW] Error codes for xsvfExecute. */

-/* Must #define XSVF_SUPPORT_ERRORCODES in micro.c to get these codes */

-#define XSVF_ERROR_NONE         0

-#define XSVF_ERROR_UNKNOWN      1

-#define XSVF_ERROR_TDOMISMATCH  2

-#define XSVF_ERROR_MAXRETRIES   3   /* TDO mismatch after max retries */

-#define XSVF_ERROR_ILLEGALCMD   4

-#define XSVF_ERROR_ILLEGALSTATE 5

-#define XSVF_ERROR_DATAOVERFLOW 6   /* Data > lenVal MAX_LEN buffer size*/

-/* Insert new errors here */

-#define XSVF_ERROR_LAST         7

-

-/*****************************************************************************

- * Function:     xsvfExecute

- * Description:  Process, interpret, and apply the XSVF commands.

- *               See port.c:readByte for source of XSVF data.

- * Parameters:   none.

- * Returns:      int - For error codes see above.

- *****************************************************************************/

-int xsvfExecute(void);

-

-#endif  /* XSVF_MICRO_H */

+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*****************************************************************************
+ * File:         micro.h
+ * Description:  This header file contains the function prototype to the
+ *               primary interface function for the XSVF player.
+ * Usage:        FIRST - PORTS.C
+ *               Customize the ports.c function implementations to establish
+ *               the correct protocol for communicating with your JTAG ports
+ *               (setPort() and readTDOBit()) and tune the waitTime() delay
+ *               function.  Also, establish access to the XSVF data source
+ *               in the readByte() function.
+ *               FINALLY - Call xsvfExecute().
+ *****************************************************************************/
+#ifndef XSVF_MICRO_H
+#define XSVF_MICRO_H
+
+/* Legacy error codes for xsvfExecute from original XSVF player v2.0 */
+#define XSVF_LEGACY_SUCCESS 1
+#define XSVF_LEGACY_ERROR   0
+
+/* 4.04 [NEW] Error codes for xsvfExecute. */
+/* Must #define XSVF_SUPPORT_ERRORCODES in micro.c to get these codes */
+#define XSVF_ERROR_NONE         0
+#define XSVF_ERROR_UNKNOWN      1
+#define XSVF_ERROR_TDOMISMATCH  2
+#define XSVF_ERROR_MAXRETRIES   3   /* TDO mismatch after max retries */
+#define XSVF_ERROR_ILLEGALCMD   4
+#define XSVF_ERROR_ILLEGALSTATE 5
+#define XSVF_ERROR_DATAOVERFLOW 6   /* Data > lenVal MAX_LEN buffer size*/
+/* Insert new errors here */
+#define XSVF_ERROR_LAST         7
+
+/*****************************************************************************
+ * Function:     xsvfExecute
+ * Description:  Process, interpret, and apply the XSVF commands.
+ *               See port.c:readByte for source of XSVF data.
+ * Parameters:   none.
+ * Returns:      int - For error codes see above.
+ *****************************************************************************/
+int xsvfExecute(void);
+
+#endif  /* XSVF_MICRO_H */
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
index 9fc63a7..6d99b60 100644
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -97,7 +97,7 @@ int checkboard (void)
 	unsigned char str[64];
 	int i = getenv_r ("serial#", str, sizeof(str));
 	unsigned char trans[16] = {0x0,0x8,0x4,0xc,0x2,0xa,0x6,0xe,
-                                   0x1,0x9,0x5,0xd,0x3,0xb,0x7,0xf};
+				   0x1,0x9,0x5,0xd,0x3,0xb,0x7,0xf};
 	unsigned char id1, id2;
 
 	puts ("Board: ");
diff --git a/board/icecube/flash.c b/board/icecube/flash.c
index 07879ff..4ae71e6 100644
--- a/board/icecube/flash.c
+++ b/board/icecube/flash.c
@@ -123,7 +123,7 @@ static flash_info_t *flash_get_info(ulong base)
 
 	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
 		info = & flash_info[i];
-		if (info->size && 
+		if (info->size &&
 			info->start[0] <= base && base <= info->start[0] + info->size - 1)
 			break;
 	}
@@ -260,7 +260,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info)
 	addr2 = (FPW *)((ulong)addr | 0x800000);
 	if (addr2 != addr &&
 		((addr2[0] & 0xff) == (addr[0] & 0xff)) && ((FPW)addr2[1] == (FPW)addr[1])) {
-		/* Seems 2 banks are the same space (8Mb chip is installed, 
+		/* Seems 2 banks are the same space (8Mb chip is installed,
 		 * J24 in default position (CS0)). Disable this (first) bank.
 		 */
 		info->flash_id = FLASH_UNKNOWN;
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 965ca6b..26cce5d 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -174,9 +174,9 @@ void flash_preinit(void)
 void flash_afterinit(ulong size)
 {
 	if (size == 0x800000) { /* adjust mapping */
-		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = 
+		*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
 			START_REG(CFG_BOOTCS_START | size);
-		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = 
+		*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
 			STOP_REG(CFG_BOOTCS_START | size, size);
 	}
 }
diff --git a/board/ixdp425/u-boot.lds b/board/ixdp425/u-boot.lds
index 23f4bd0..3170aa0 100644
--- a/board/ixdp425/u-boot.lds
+++ b/board/ixdp425/u-boot.lds
@@ -26,29 +26,29 @@ OUTPUT_ARCH(arm)
 ENTRY(_start)
 SECTIONS
 {
-        . = 0x00000000;
+	. = 0x00000000;
 
-        . = ALIGN(4);
+	. = ALIGN(4);
 	.text      :
 	{
 	  cpu/ixp/start.o	(.text)
 	  *(.text)
 	}
 
-        . = ALIGN(4);
-        .rodata : { *(.rodata) }
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
 
-        . = ALIGN(4);
-        .data : { *(.data) }
+	. = ALIGN(4);
+	.data : { *(.data) }
 
-        . = ALIGN(4);
-        .got : { *(.got) }
+	. = ALIGN(4);
+	.got : { *(.got) }
 
 	armboot_end_data = .;
 
-        . = ALIGN(4);
+	. = ALIGN(4);
 	bss_start = .;
-        .bss : { *(.bss) }
+	.bss : { *(.bss) }
 	bss_end = .;
 
 	armboot_end = .;
diff --git a/board/mpc8266ads/mpc8266ads.c b/board/mpc8266ads/mpc8266ads.c
index 68a59a6..e2c98b1 100644
--- a/board/mpc8266ads/mpc8266ads.c
+++ b/board/mpc8266ads/mpc8266ads.c
@@ -562,13 +562,13 @@ long int initdram(int board_type)
     printf(", Using Bank Based Interleave\n");
 #else
     printf(", Using Page Based Interleave\n");
-#endif    
+#endif
 	printf("\tTotal size: ");
 
-    /* this delay only needed for original 16MB DIMM... 
+    /* this delay only needed for original 16MB DIMM...
      * Not needed for any other memory configuration */
     if ((sdram_size * chipselects) == (16 *1024 *1024))
-        udelay (250000);
+	udelay (250000);
     return (sdram_size * chipselects);
 	/*return (16 * 1024 * 1024);*/
 }
@@ -584,4 +584,3 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
-
diff --git a/board/mpc8540ads/Makefile b/board/mpc8540ads/Makefile
new file mode 100644
index 0000000..d150df8
--- /dev/null
+++ b/board/mpc8540ads/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+SOBJS	:= init.o
+#SOBJS	:=
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpc8540ads/config.mk b/board/mpc8540ads/config.mk
new file mode 100644
index 0000000..186a2f2
--- /dev/null
+++ b/board/mpc8540ads/config.mk
@@ -0,0 +1,32 @@
+# Modified by Xianghua Xiao, X.Xiao@motorola.com
+# (C) Copyright 2002,Motorola Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8540ads board
+# default CCARBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8540=1
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/mpc8540ads/flash.c b/board/mpc8540ads/flash.c
new file mode 100644
index 0000000..ac2383e
--- /dev/null
+++ b/board/mpc8540ads/flash.c
@@ -0,0 +1,539 @@
+/*
+ * (C) Copyright 2003 Motorola Inc.
+ *  Xianghua Xiao,(X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000, 2001
+ *  Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if !defined(CFG_NO_FLASH)
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+#undef DEBUG
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size;
+	int i;
+
+	/* Init: enable write,
+	 * or we cannot even write flash commands
+	 */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+
+		/* set the default sector offset */
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size<<20);
+	}
+
+	/* Re-do sizing to get full correct info */
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	flash_info[0].size = size;
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      &flash_info[0]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      &flash_info[0]);
+#endif
+#endif
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
+	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+				break;
+	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+				break;
+	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+				break;
+	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+				break;
+	case FLASH_28F640J3A:   printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+	ulong sector_offset;
+
+#ifdef DEBUG
+	printf("Check flash at 0x%08x\n",(uint)addr);
+#endif
+	/* Write "Intelligent Identifier" command: read Manufacturer ID */
+	*addr = 0x90909090;
+	udelay(20);
+	asm("sync");
+
+	value = addr[0] & 0x00FF00FF;
+
+#ifdef DEBUG
+	printf("manufacturer=0x%x\n",(uint)value);
+#endif
+	switch (value) {
+	case MT_MANUFACT:	/* SHARP, MT or => Intel */
+	case INTEL_ALT_MANU:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		printf("unknown manufacturer: %x\n", (unsigned int)value);
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[1] & 0x00FF00FF;             /* device ID            */
+
+#ifdef DEBUG
+	printf("deviceID=0x%x\n",(uint)value);
+#endif
+	switch (value) {
+	case (INTEL_ID_28F016S):
+		info->flash_id += FLASH_28F016SV;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F160S3):
+		info->flash_id += FLASH_28F160S3;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F320S3):
+		info->flash_id += FLASH_28F320S3;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		sector_offset = 0x20000;
+		break;				/* => 2x4 MB		*/
+
+	case (INTEL_ID_28F640J3A):
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x01000000;
+		sector_offset = 0x40000;
+		break;                          /* => 2x8 MB             */
+
+	case SHARP_ID_28F016SCL:
+	case SHARP_ID_28F016SCZ:
+		info->flash_id      = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+		info->sector_count  = 32;
+		info->size          = 0x00800000;
+		sector_offset = 0x40000;
+		break;				/* => 4x2 MB		*/
+
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++) {
+		info->start[i] = base;
+		base += sector_offset;
+		/* don't know how to check sector protection */
+		info->protect[i] = 0;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (vu_long *)info->start[0];
+		*addr = 0xFFFFFF;	/* reset bank to read array mode */
+		asm("sync");
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+#ifdef DEBUG
+	printf("\nFlash Erase:\n");
+#endif
+	/* Make Sure Block Lock Bit is not set. */
+	if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+		return 1;
+	}
+
+	/* Start erase on unprotected sectors */
+#if defined(DEBUG)
+	printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
+#endif
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_long *addr = (vu_long *)(info->start[sect]);
+			asm("sync");
+
+			last = start = get_timer (0);
+
+			/* Disable interrupts which might cause a timeout here */
+			flag = disable_interrupts();
+
+			/* Reset Array */
+			*addr = 0xffffffff;
+			asm("sync");
+			/* Clear Status Register */
+			*addr = 0x50505050;
+			asm("sync");
+			/* Single Block Erase Command */
+			*addr = 0x20202020;
+			asm("sync");
+			/* Confirm */
+			*addr = 0xD0D0D0D0;
+			asm("sync");
+
+			if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+			    /* Resume Command, as per errata update */
+			    *addr = 0xD0D0D0D0;
+			    asm("sync");
+			}
+
+			/* re-enable interrupts if necessary */
+			if (flag)
+				enable_interrupts();
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+			while ((*addr & 0x00800080) != 0x00800080) {
+				if(*addr & 0x00200020){
+					printf("Error in Block Erase - Lock Bit may be set!\n");
+					printf("Status Register = 0x%X\n", (uint)*addr);
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					asm("sync");
+					return 1;
+				}
+				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					asm("sync");
+					return 1;
+				}
+				/* show that we're waiting */
+				if ((now - last) > 1000) {	/* every second */
+					putc ('.');
+					last = now;
+				}
+			}
+
+			/* reset to read mode */
+			*addr = 0xFFFFFFFF;
+			asm("sync");
+		}
+	}
+
+	printf ("flash erase done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)dest;
+	ulong start, csr;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Write Command */
+	*addr = 0x10101010;
+	asm("sync");
+
+	/* Write Data */
+	*addr = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	flag  = 0;
+
+	while (((csr = *addr) & 0x00800080) != 0x00800080) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			flag = 1;
+			break;
+		}
+	}
+	if (csr & 0x40404040) {
+		printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+		flag = 1;
+	}
+
+	/* Clear Status Registers Command */
+	*addr = 0x50505050;
+	asm("sync");
+	/* Reset to read array mode */
+	*addr = 0xFFFFFFFF;
+	asm("sync");
+
+	return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long  * addr)
+{
+	ulong start, now;
+
+	/* Reset Array */
+	*addr = 0xffffffff;
+	asm("sync");
+	/* Clear Status Register */
+	*addr = 0x50505050;
+	asm("sync");
+
+	*addr = 0x60606060;
+	asm("sync");
+	*addr = 0xd0d0d0d0;
+	asm("sync");
+
+	start = get_timer (0);
+	while((*addr & 0x00800080) != 0x00800080){
+		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout on clearing Block Lock Bit\n");
+			*addr = 0xFFFFFFFF;	/* reset bank */
+			asm("sync");
+			return 1;
+		}
+	}
+	return 0;
+}
+
+#endif /* !CFG_NO_FLASH */
diff --git a/board/mpc8540ads/init.S b/board/mpc8540ads/init.S
new file mode 100644
index 0000000..8c2ca65
--- /dev/null
+++ b/board/mpc8540ads/init.S
@@ -0,0 +1,178 @@
+/*
+* Copyright (C) 2002,2003, Motorola Inc.
+* Xianghua Xiao <X.Xiao@motorola.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define	entry_start \
+	mflr	r1 	;	\
+	bl	0f 	;
+
+#define	entry_end \
+0:	mflr	r0	;	\
+	mtlr	r1	;	\
+	blr		;
+
+/* TLB1 entries configuration: */
+
+	.section	.bootpg, "ax"
+	.globl	tlb1_entry
+tlb1_entry:
+	entry_start
+
+	.long 0x0a	/* the following data table uses a few of 16 TLB entries */
+
+	.long TLB1_MAS0(1,1,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+  #if defined(CFG_FLASH_PORT_WIDTH_16)
+	.long TLB1_MAS0(1,2,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+	.long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,3,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+	.long TLB1_MAS2((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,2,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
+	.long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,3,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+
+  #if !defined(CONFIG_SPD_EEPROM)
+	.long TLB1_MAS0(1,4,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,5,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,4,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,5,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+
+	.long TLB1_MAS0(1,6,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+  #if defined(CONFIG_RAM_AS_FLASH)
+	.long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+  #else
+	.long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+  #endif
+	.long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,7,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+  #ifdef CONFIG_L2_INIT_RAM
+	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+  #else
+	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+  #endif
+	.long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,8,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,9,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+	.long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+  #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	.long TLB1_MAS0(1,15,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,15,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+	entry_end
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-0800_0000: DDR(128M) -or- larger
+ * f000_0000-f3ff_ffff: PCI(256M)
+ * f400_0000-f7ff_ffff: RapidIO(128M)
+ * f800_0000-ffff_ffff: localbus(128M)
+ *   f800_0000-fbff_ffff: LBC SDRAM(64M)
+ *   fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
+ *   fdf0_0000-fdff_ffff: CCSRBAR(1M)
+ *   fe00_0000-ffff_ffff: Flash(32M)
+ * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
+ *       Window.
+ * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR0 	(LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR0 0
+#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR2 0
+#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+	.section .bootpg, "ax"
+	.globl	law_entry
+law_entry:
+	entry_start
+	.long 0x03
+	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
+	entry_end
diff --git a/board/mpc8540ads/mpc8540ads.c b/board/mpc8540ads/mpc8540ads.c
new file mode 100644
index 0000000..c21cd9e
--- /dev/null
+++ b/board/mpc8540ads/mpc8540ads.c
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2002,2003, Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+extern long int spd_sdram (void);
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <spd.h>
+
+long int fixed_sdram (void);
+
+/* MPC8540ADS Board Status & Control Registers */
+#if 0
+typedef struct bscr_ {
+	unsigned long bcsr0;
+	unsigned long bcsr1;
+	unsigned long bcsr2;
+	unsigned long bcsr3;
+	unsigned long bcsr4;
+	unsigned long bcsr5;
+	unsigned long bcsr6;
+	unsigned long bcsr7;
+} bcsr_t;
+#endif
+
+int board_pre_init (void)
+{
+#if defined(CONFIG_PCI)
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+
+    pci->peer &= 0xffffffdf; /* disable master abort */
+#endif
+	return 0;
+}
+
+int checkboard (void)
+{
+	sys_info_t sysinfo;
+
+	get_sys_info (&sysinfo);
+
+	printf ("Board: Motorola MPC8540ADS Board\n");
+	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
+	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
+	if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
+		|| (CFG_LBC_LCRR & 0x0f) == 8) {
+		printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
+	} else {
+		printf("\tLBC: unknown\n");
+	}
+	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
+	return (0);
+}
+
+long int initdram (int board_type)
+{
+	long dram_size = 0;
+	extern long spd_sdram (void);
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if !defined(CONFIG_RAM_AS_FLASH)
+	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	sys_info_t sysinfo;
+	uint temp_lbcdll = 0;
+#endif
+#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
+	volatile ccsr_gur_t *gur= &immap->im_gur;
+#endif
+#if defined(CONFIG_DDR_DLL)
+	uint temp_ddrdll = 0;
+
+	/* Work around to stabilize DDR DLL */
+	temp_ddrdll = gur->ddrdllcr;
+	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+	asm("sync;isync;msync");
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram ();
+#else
+	dram_size = fixed_sdram ();
+#endif
+
+#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
+	get_sys_info(&sysinfo);
+	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+	if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
+		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+	} else {
+#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
+		lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
+#endif
+		lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
+		udelay(200);
+		temp_lbcdll = gur->lbcdllcr;
+		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
+		asm("sync;isync;msync");
+	}
+	lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
+	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	asm("sync");
+	lbc->lsrt = CFG_LBC_LSRT;
+	asm("sync");
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm("sync");
+#endif
+
+#if defined(CONFIG_DDR_ECC)
+	{
+		/* Initialize all of memory for ECC, then
+		 * enable errors */
+		uint *p = 0;
+		uint i = 0;
+		volatile immap_t *immap = (immap_t *)CFG_IMMR;
+		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+		dma_init();
+		for (*p = 0; p < (uint *)(8 * 1024); p++) {
+			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
+			*p = (unsigned int)0xdeadbeef;
+			if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
+		}
+
+		/* 8K */
+		dma_xfer((uint *)0x2000,0x2000,(uint *)0);
+		/* 16K */
+		dma_xfer((uint *)0x4000,0x4000,(uint *)0);
+		/* 32K */
+		dma_xfer((uint *)0x8000,0x8000,(uint *)0);
+		/* 64K */
+		dma_xfer((uint *)0x10000,0x10000,(uint *)0);
+		/* 128k */
+		dma_xfer((uint *)0x20000,0x20000,(uint *)0);
+		/* 256k */
+		dma_xfer((uint *)0x40000,0x40000,(uint *)0);
+		/* 512k */
+		dma_xfer((uint *)0x80000,0x80000,(uint *)0);
+		/* 1M */
+		dma_xfer((uint *)0x100000,0x100000,(uint *)0);
+		/* 2M */
+		dma_xfer((uint *)0x200000,0x200000,(uint *)0);
+		/* 4M */
+		dma_xfer((uint *)0x400000,0x400000,(uint *)0);
+
+		for (i = 1; i < dram_size / 0x800000; i++) {
+			dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
+		}
+
+		/* Enable errors for ECC */
+		ddr->err_disable = 0x00000000;
+		asm("sync;isync;msync");
+	}
+#endif
+
+	return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+  #ifndef CFG_RAMBOOT
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+
+	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+	ddr->sdram_mode = CFG_DDR_MODE;
+	ddr->sdram_interval = CFG_DDR_INTERVAL;
+    #if defined (CONFIG_DDR_ECC)
+	ddr->err_disable = 0x0000000D;
+	ddr->err_sbe = 0x00ff0000;
+    #endif
+	asm("sync;isync;msync");
+	udelay(500);
+    #if defined (CONFIG_DDR_ECC)
+	/* Enable ECC checking */
+	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+    #else
+	ddr->sdram_cfg = CFG_DDR_CONTROL;
+    #endif
+	asm("sync; isync; msync");
+	udelay(500);
+  #endif
+	return (CFG_SDRAM_SIZE * 1024 * 1024);
+}
+#endif	/* !defined(CONFIG_SPD_EEPROM) */
diff --git a/board/mpc8540ads/u-boot.lds b/board/mpc8540ads/u-boot.lds
new file mode 100644
index 0000000..56dd457
--- /dev/null
+++ b/board/mpc8540ads/u-boot.lds
@@ -0,0 +1,148 @@
+/*
+ * (C) Copyright 2002,2003, Motorola,Inc.
+ * Xianghua Xiao, X.Xiao@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+    board/mpc8540ads/init.o (.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc85xx/start.o	(.text)
+    board/mpc8540ads/init.o (.text)
+    cpu/mpc85xx/traps.o (.text)
+    cpu/mpc85xx/interrupts.o (.text)
+    cpu/mpc85xx/cpu_init.o (.text)
+    cpu/mpc85xx/cpu.o (.text)
+    cpu/mpc85xx/tsec.o (.text)
+    cpu/mpc85xx/speed.o (.text)
+    cpu/mpc85xx/pci.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/mpc8560ads/Makefile b/board/mpc8560ads/Makefile
new file mode 100644
index 0000000..d150df8
--- /dev/null
+++ b/board/mpc8560ads/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2001
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o flash.o
+SOBJS	:= init.o
+#SOBJS	:=
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpc8560ads/config.mk b/board/mpc8560ads/config.mk
new file mode 100644
index 0000000..698fdaa
--- /dev/null
+++ b/board/mpc8560ads/config.mk
@@ -0,0 +1,32 @@
+# Modified by Xianghua Xiao, X.Xiao@motorola.com
+# (C) Copyright 2002,2003 Motorola Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# mpc8560ads board
+# default CCARBAR is at 0xff700000
+# assume U-Boot is less than 0.5MB
+#
+TEXT_BASE = 0xfff80000
+
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8560=1
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/board/mpc8560ads/flash.c b/board/mpc8560ads/flash.c
new file mode 100644
index 0000000..c9dfb4d
--- /dev/null
+++ b/board/mpc8560ads/flash.c
@@ -0,0 +1,539 @@
+/*
+ * (C) Copyright 2003 Motorola Inc.
+ *  Xianghua Xiao,(X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2000, 2001
+ *  Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
+ * Add support the Sharp chips on the mpc8260ads.
+ * I started with board/ip860/flash.c and made changes I found in
+ * the MTD project by David Schleef.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if !defined(CFG_NO_FLASH)
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef  CFG_ENV_ADDR
+#  define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+# ifndef  CFG_ENV_SECT_SIZE
+#  define CFG_ENV_SECT_SIZE  CFG_ENV_SIZE
+# endif
+#endif
+
+#undef DEBUG
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int clear_block_lock_bit(vu_long * addr);
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size;
+	int i;
+
+	/* Init: enable write,
+	 * or we cannot even write flash commands
+	 */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+
+		/* set the default sector offset */
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size, size<<20);
+	}
+
+	/* Re-do sizing to get full correct info */
+	size = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	flash_info[0].size = size;
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      &flash_info[0]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      &flash_info[0]);
+#endif
+#endif
+	return (size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
+	case FLASH_MAN_SHARP:   printf ("Sharp ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
+				break;
+	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
+				break;
+	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
+				break;
+	case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n");
+				break;
+	case FLASH_28F640J3A:   printf ("28F640J3A (64 Mbit, 64 x 128K)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+	ulong sector_offset;
+
+#ifdef DEBUG
+	printf("Check flash at 0x%08x\n",(uint)addr);
+#endif
+	/* Write "Intelligent Identifier" command: read Manufacturer ID */
+	*addr = 0x90909090;
+	udelay(20);
+	asm("sync");
+
+	value = addr[0] & 0x00FF00FF;
+
+#ifdef DEBUG
+	printf("manufacturer=0x%x\n",(uint)value);
+#endif
+	switch (value) {
+	case MT_MANUFACT:	/* SHARP, MT or => Intel */
+	case INTEL_ALT_MANU:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
+	default:
+		printf("unknown manufacturer: %x\n", (unsigned int)value);
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[1] & 0x00FF00FF;             /* device ID            */
+
+#ifdef DEBUG
+	printf("deviceID=0x%x\n",(uint)value);
+#endif
+	switch (value) {
+	case (INTEL_ID_28F016S):
+		info->flash_id += FLASH_28F016SV;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F160S3):
+		info->flash_id += FLASH_28F160S3;
+		info->sector_count = 32;
+		info->size = 0x00400000;
+		sector_offset = 0x20000;
+		break;				/* => 2x2 MB		*/
+
+	case (INTEL_ID_28F320S3):
+		info->flash_id += FLASH_28F320S3;
+		info->sector_count = 64;
+		info->size = 0x00800000;
+		sector_offset = 0x20000;
+		break;				/* => 2x4 MB		*/
+
+	case (INTEL_ID_28F640J3A):
+		info->flash_id += FLASH_28F640J3A;
+		info->sector_count = 64;
+		info->size = 0x01000000;
+		sector_offset = 0x40000;
+		break;                          /* => 8 MB             */
+
+	case SHARP_ID_28F016SCL:
+	case SHARP_ID_28F016SCZ:
+		info->flash_id      = FLASH_MAN_SHARP | FLASH_LH28F016SCT;
+		info->sector_count  = 32;
+		info->size          = 0x00800000;
+		sector_offset = 0x40000;
+		break;				/* => 4x2 MB		*/
+
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	/* set up sector start address table */
+	for (i = 0; i < info->sector_count; i++) {
+		info->start[i] = base;
+		base += sector_offset;
+		/* don't know how to check sector protection */
+		info->protect[i] = 0;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (vu_long *)info->start[0];
+		*addr = 0xFFFFFF;	/* reset bank to read array mode */
+		asm("sync");
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (    ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL)
+	     && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+#ifdef DEBUG
+	printf("\nFlash Erase:\n");
+#endif
+	/* Make Sure Block Lock Bit is not set. */
+	if(clear_block_lock_bit((vu_long *)(info->start[s_first]))){
+		return 1;
+	}
+
+	/* Start erase on unprotected sectors */
+#if defined(DEBUG)
+	printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last);
+#endif
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_long *addr = (vu_long *)(info->start[sect]);
+			asm("sync");
+
+			last = start = get_timer (0);
+
+			/* Disable interrupts which might cause a timeout here */
+			flag = disable_interrupts();
+
+			/* Reset Array */
+			*addr = 0xffffffff;
+			asm("sync");
+			/* Clear Status Register */
+			*addr = 0x50505050;
+			asm("sync");
+			/* Single Block Erase Command */
+			*addr = 0x20202020;
+			asm("sync");
+			/* Confirm */
+			*addr = 0xD0D0D0D0;
+			asm("sync");
+
+			if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) {
+			    /* Resume Command, as per errata update */
+			    *addr = 0xD0D0D0D0;
+			    asm("sync");
+			}
+
+			/* re-enable interrupts if necessary */
+			if (flag)
+				enable_interrupts();
+
+			/* wait at least 80us - let's wait 1 ms */
+			udelay (1000);
+			while ((*addr & 0x00800080) != 0x00800080) {
+				if(*addr & 0x00200020){
+					printf("Error in Block Erase - Lock Bit may be set!\n");
+					printf("Status Register = 0x%X\n", (uint)*addr);
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					asm("sync");
+					return 1;
+				}
+				if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+					printf ("Timeout\n");
+					*addr = 0xFFFFFFFF;	/* reset bank */
+					asm("sync");
+					return 1;
+				}
+				/* show that we're waiting */
+				if ((now - last) > 1000) {	/* every second */
+					putc ('.');
+					last = now;
+				}
+			}
+
+			/* reset to read mode */
+			*addr = 0xFFFFFFFF;
+			asm("sync");
+		}
+	}
+
+	printf ("flash erase done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)dest;
+	ulong start, csr;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Write Command */
+	*addr = 0x10101010;
+	asm("sync");
+
+	/* Write Data */
+	*addr = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	flag  = 0;
+
+	while (((csr = *addr) & 0x00800080) != 0x00800080) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			flag = 1;
+			break;
+		}
+	}
+	if (csr & 0x40404040) {
+		printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
+		flag = 1;
+	}
+
+	/* Clear Status Registers Command */
+	*addr = 0x50505050;
+	asm("sync");
+	/* Reset to read array mode */
+	*addr = 0xFFFFFFFF;
+	asm("sync");
+
+	return (flag);
+}
+
+/*-----------------------------------------------------------------------
+ * Clear Block Lock Bit, returns:
+ * 0 - OK
+ * 1 - Timeout
+ */
+
+static int clear_block_lock_bit(vu_long  * addr)
+{
+	ulong start, now;
+
+	/* Reset Array */
+	*addr = 0xffffffff;
+	asm("sync");
+	/* Clear Status Register */
+	*addr = 0x50505050;
+	asm("sync");
+
+	*addr = 0x60606060;
+	asm("sync");
+	*addr = 0xd0d0d0d0;
+	asm("sync");
+
+	start = get_timer (0);
+	while((*addr & 0x00800080) != 0x00800080){
+		if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout on clearing Block Lock Bit\n");
+			*addr = 0xFFFFFFFF;	/* reset bank */
+			asm("sync");
+			return 1;
+		}
+	}
+	return 0;
+}
+
+#endif /* !CFG_NO_FLASH */
diff --git a/board/mpc8560ads/init.S b/board/mpc8560ads/init.S
new file mode 100644
index 0000000..c716ef1
--- /dev/null
+++ b/board/mpc8560ads/init.S
@@ -0,0 +1,178 @@
+/*
+* Copyright (C) 2002,2003, Motorola Inc.
+* Xianghua Xiao <X.Xiao@motorola.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define	entry_start \
+	mflr	r1 	;	\
+	bl	0f 	;
+
+#define	entry_end \
+0:	mflr	r0	;	\
+	mtlr	r1	;	\
+	blr		;
+
+/* TLB1 entries configuration: */
+
+	.section	.bootpg, "ax"
+	.globl	tlb1_entry
+tlb1_entry:
+	entry_start
+
+	.long 0x0a	/* the following data table uses a few of 16 TLB entries */
+
+	.long TLB1_MAS0(1,1,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+  #if defined(CFG_FLASH_PORT_WIDTH_16)
+	.long TLB1_MAS0(1,2,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+	.long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,3,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+	.long TLB1_MAS2((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,2,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
+	.long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,3,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+
+  #if !defined(CONFIG_SPD_EEPROM)
+	.long TLB1_MAS0(1,4,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,5,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,4,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,5,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+
+	.long TLB1_MAS0(1,6,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+  #if defined(CONFIG_RAM_AS_FLASH)
+	.long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+  #else
+	.long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+  #endif
+	.long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,7,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+  #ifdef CONFIG_L2_INIT_RAM
+	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+  #else
+	.long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+  #endif
+	.long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,8,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+	.long TLB1_MAS0(1,9,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+	.long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+
+  #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+	.long TLB1_MAS0(1,15,0)
+	.long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+  #else
+	.long TLB1_MAS0(1,15,0)
+	.long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+	.long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+  #endif
+	entry_end
+
+/* LAW(Local Access Window) configuration:
+ * 0000_0000-0800_0000: DDR(128M) -or- larger
+ * f000_0000-f3ff_ffff: PCI(256M)
+ * f400_0000-f7ff_ffff: RapidIO(128M)
+ * f800_0000-ffff_ffff: localbus(128M)
+ *   f800_0000-fbff_ffff: LBC SDRAM(64M)
+ *   fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M)
+ *   fdf0_0000-fdff_ffff: CCSRBAR(1M)
+ *   fe00_0000-ffff_ffff: Flash(32M)
+ * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
+ *       Window.
+ * Note: If flash is 8M at default position(last 8M),no LAW needed.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+#define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR0  (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR0 0
+#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR1 ((CFG_PCI_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1  (LAWAR_EN | LAWAR_TRGT_IF_PCIX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+#if !defined(CONFIG_RAM_AS_FLASH)
+#define LAWBAR2 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR2  (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M))
+#else
+#define LAWBAR2 0
+#define LAWAR2 ((LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
+#endif
+
+	.section .bootpg, "ax"
+	.globl  law_entry
+law_entry:
+	entry_start
+	.long 0x03
+	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2
+	entry_end
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
new file mode 100644
index 0000000..5567b69
--- /dev/null
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -0,0 +1,445 @@
+/*
+ * (C) Copyright 2003,Motorola Inc.
+ * Xianghua Xiao, (X.Xiao@motorola.com)
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+extern long int spd_sdram (void);
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <ioports.h>
+#include <spd.h>
+#include <miiphy.h>
+
+long int fixed_sdram (void);
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+
+const iop_conf_t iop_conf_tab[4][32] = {
+
+    /* Port A configuration */
+    {   /*            conf ppar psor pdir podr pdat */
+	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
+	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
+	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
+	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
+	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
+	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
+	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
+	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
+	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
+	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
+	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
+	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
+	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
+	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
+	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
+	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
+	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
+	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
+	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
+	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
+	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
+	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
+	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
+	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
+	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
+	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
+	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
+	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
+	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
+	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
+	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
+	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
+    },
+
+    /* Port B configuration */
+    {   /*            conf ppar psor pdir podr pdat */
+	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
+	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
+	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
+	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
+	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
+	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
+	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
+	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
+	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
+	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
+	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
+	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
+	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
+	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
+	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
+	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
+	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
+	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
+	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
+	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
+	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
+	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
+	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    },
+
+    /* Port C */
+    {   /*            conf ppar psor pdir podr pdat */
+	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
+	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
+	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
+	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
+	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
+	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
+	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
+	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
+	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
+	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
+	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
+	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
+	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
+	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
+	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
+	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
+	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
+	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
+	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
+	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
+	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
+	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
+	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
+	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
+	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
+	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
+	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
+	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
+	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
+	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
+	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
+	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
+    },
+
+    /* Port D */
+    {   /*            conf ppar psor pdir podr pdat */
+	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
+	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
+	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
+	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
+	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
+	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
+	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
+	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
+	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
+	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
+	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
+	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
+	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
+	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
+	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
+	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
+	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
+	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
+	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
+	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
+	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
+	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
+	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
+	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
+	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
+	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
+	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
+	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
+	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
+	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
+    }
+};
+
+/* MPC8560ADS Board Status & Control Registers */
+typedef struct bscr_ {
+	volatile unsigned char bcsr0;
+	volatile unsigned char bcsr1;
+	volatile unsigned char bcsr2;
+	volatile unsigned char bcsr3;
+	volatile unsigned char bcsr4;
+	volatile unsigned char bcsr5;
+} bcsr_t;
+
+int board_pre_init (void)
+{
+#if defined(CONFIG_PCI)
+    volatile immap_t *immr = (immap_t *)CFG_IMMR;
+    volatile ccsr_pcix_t *pci = &immr->im_pcix;
+
+    pci->peer &= 0xfffffffdf; /* disable master abort */
+#endif
+	return 0;
+}
+
+void reset_phy (void)
+{
+#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
+	volatile bcsr_t *bcsr = (bcsr_t *) CFG_BCSR;
+#endif
+	/* reset Giga bit Ethernet port if needed here */
+
+	/* reset the CPM FEC port */
+#if (CONFIG_ETHER_INDEX == 2)
+	bcsr->bcsr2 &= ~FETH2_RST;
+	udelay(2);
+	bcsr->bcsr2 |=  FETH2_RST;
+	udelay(1000);
+#elif (CONFIG_ETHER_INDEX == 3)
+	bcsr->bcsr3 &= ~FETH3_RST;
+	udelay(2);
+	bcsr->bcsr3 |=  FETH3_RST;
+	udelay(1000);
+#endif
+#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
+	miiphy_reset(0x0);	/* reset PHY */
+	miiphy_write(0, PHY_MIPSCR, 0xf028); /* change PHY address to 0x02 */
+	miiphy_write(0x02, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#endif /* CONFIG_MII */
+}
+
+int checkboard (void)
+{
+	sys_info_t sysinfo;
+
+	get_sys_info (&sysinfo);
+
+	printf ("Board: Motorola MPC8560ADS Board\n");
+	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
+	printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
+	if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
+		|| (CFG_LBC_LCRR & 0x0f) == 8) {
+		printf ("\tLBC: %lu MHz\n", sysinfo.freqSystemBus / 1000000 /(CFG_LBC_LCRR & 0x0f));
+	} else {
+		printf("\tLBC: unknown\n");
+	}
+	printf("\tCPM: %lu Mhz\n", sysinfo.freqSystemBus / 1000000);
+	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
+
+	return (0);
+}
+
+
+long int initdram (int board_type)
+{
+	long dram_size = 0;
+	extern long spd_sdram (void);
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#if !defined(CONFIG_RAM_AS_FLASH)
+	volatile ccsr_lbc_t *lbc= &immap->im_lbc;
+	sys_info_t sysinfo;
+	uint temp_lbcdll = 0;
+#endif
+#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
+	volatile ccsr_gur_t *gur= &immap->im_gur;
+#endif
+#if defined(CONFIG_DDR_DLL)
+	uint temp_ddrdll = 0;
+
+	/* Work around to stabilize DDR DLL */
+	temp_ddrdll = gur->ddrdllcr;
+	gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
+	asm("sync;isync;msync");
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+	dram_size = spd_sdram ();
+#else
+	dram_size = fixed_sdram ();
+#endif
+
+#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
+	get_sys_info(&sysinfo);
+	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+	if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
+		lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
+	} else {
+#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */
+		lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */
+#endif
+		lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
+		udelay(200);
+		temp_lbcdll = gur->lbcdllcr;
+		gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
+		asm("sync;isync;msync");
+	}
+	lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
+	lbc->br2 = CFG_BR2_PRELIM;
+	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->lsdmr = CFG_LBC_LSDMR_1;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_2;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_3;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	asm("sync");
+	(unsigned int) * (ulong *)0 = 0x000000ff;
+	lbc->lsdmr = CFG_LBC_LSDMR_5;
+	asm("sync");
+	lbc->lsrt = CFG_LBC_LSRT;
+	asm("sync");
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	asm("sync");
+#endif
+
+#if defined(CONFIG_DDR_ECC)
+	{
+		/* Initialize all of memory for ECC, then
+		 * enable errors */
+		uint *p = 0;
+		uint i = 0;
+		volatile immap_t *immap = (immap_t *)CFG_IMMR;
+		volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+		dma_init();
+		for (*p = 0; p < (uint *)(8 * 1024); p++) {
+			if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
+			*p = (unsigned int)0xdeadbeef;
+			if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
+		}
+
+		/* 8K */
+		dma_xfer((uint *)0x2000,0x2000,(uint *)0);
+		/* 16K */
+		dma_xfer((uint *)0x4000,0x4000,(uint *)0);
+		/* 32K */
+		dma_xfer((uint *)0x8000,0x8000,(uint *)0);
+		/* 64K */
+		dma_xfer((uint *)0x10000,0x10000,(uint *)0);
+		/* 128k */
+		dma_xfer((uint *)0x20000,0x20000,(uint *)0);
+		/* 256k */
+		dma_xfer((uint *)0x40000,0x40000,(uint *)0);
+		/* 512k */
+		dma_xfer((uint *)0x80000,0x80000,(uint *)0);
+		/* 1M */
+		dma_xfer((uint *)0x100000,0x100000,(uint *)0);
+		/* 2M */
+		dma_xfer((uint *)0x200000,0x200000,(uint *)0);
+		/* 4M */
+		dma_xfer((uint *)0x400000,0x400000,(uint *)0);
+
+		for (i = 1; i < dram_size / 0x800000; i++) {
+			dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
+		}
+
+		/* Enable errors for ECC */
+		ddr->err_disable = 0x00000000;
+		asm("sync;isync;msync");
+	}
+#endif
+
+	return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+  #ifndef CFG_RAMBOOT
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_ddr_t *ddr= &immap->im_ddr;
+
+	ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+	ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+	ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+	ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+	ddr->sdram_mode = CFG_DDR_MODE;
+	ddr->sdram_interval = CFG_DDR_INTERVAL;
+    #if defined (CONFIG_DDR_ECC)
+	ddr->err_disable = 0x0000000D;
+	ddr->err_sbe = 0x00ff0000;
+    #endif
+	asm("sync;isync;msync");
+	udelay(500);
+    #if defined (CONFIG_DDR_ECC)
+	/* Enable ECC checking */
+	ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+    #else
+	ddr->sdram_cfg = CFG_DDR_CONTROL;
+    #endif
+	asm("sync; isync; msync");
+	udelay(500);
+  #endif
+	return ( CFG_SDRAM_SIZE * 1024 * 1024);
+}
+#endif	/* !defined(CONFIG_SPD_EEPROM) */
diff --git a/board/mpc8560ads/u-boot.lds b/board/mpc8560ads/u-boot.lds
new file mode 100644
index 0000000..4c6c7db
--- /dev/null
+++ b/board/mpc8560ads/u-boot.lds
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2002,2003,Motorola,Inc.
+ * Xianghua Xiao, X.Xiao@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/mpc85xx/start.o	(.bootpg)
+    board/mpc8560ads/init.o (.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc85xx/start.o	(.text)
+    board/mpc8560ads/init.o (.text)
+    cpu/mpc85xx/commproc.o (.text)
+    cpu/mpc85xx/traps.o (.text)
+    cpu/mpc85xx/interrupts.o (.text)
+    cpu/mpc85xx/serial_scc.o (.text)
+    cpu/mpc85xx/ether_fcc.o (.text)
+    cpu/mpc85xx/cpu_init.o (.text)
+    cpu/mpc85xx/cpu.o (.text)
+    cpu/mpc85xx/tsec.o (.text)
+    cpu/mpc85xx/speed.o (.text)
+    cpu/mpc85xx/i2c.o (.text)
+    cpu/mpc85xx/spd_sdram.o (.text)
+    common/dlmalloc.o (.text)
+    lib_generic/crc32.o (.text)
+    lib_ppc/extable.o (.text)
+    lib_generic/zlib.o (.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+   }
+    _etext = .;
+    PROVIDE (etext = .);
+    .rodata    :
+   {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index 98cfb0d..e56e307 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -86,14 +86,14 @@ void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
  * The first thing we do is to map the Flash CS to the Flash area and
  * the MPS CS to the MPS area. Since the flash size is unknown at this
  * point, we use the max flash size and the lowest flash address as base.
- * 
+ *
  * After flash detection we adjust the size of the CS area accordingly.
  * The board_init_r will fill in wrong values in the board init structure,
  * but this will be fixed in the misc_init_r routine:
  * bd->bi_flashstart=0-flash_info[0].size
  * bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN
  * bd->bi_flashoffset=0
- * 
+ *
  */
 int get_boot_mode(void)
 {
@@ -152,7 +152,6 @@ void setup_cs_reloc(void)
 }
 
 
-
 unsigned long flash_init (void)
 {
 	unsigned long size_b0, size_b1,flashcr, size_reg;
@@ -207,7 +206,7 @@ unsigned long flash_init (void)
 		case 32: i=5; break; /* = 32MB */
 		case 64: i=6; break; /* = 64MB */
 		case 128: i=7; break; /*= 128MB */
-		default: 
+		default:
 			printf("\n #### ERROR, wrong size %ld MByte reset board #####\n",size_reg);
 			while(1);
 	}
@@ -345,7 +344,7 @@ void flash_print_info  (flash_info_t *info)
 
 
 /*-----------------------------------------------------------------------
- 
+
 */
 
 /*
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index 3b04535..8df642d 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -178,4 +178,3 @@ U_BOOT_CMD(
 	"vcma9   - VCMA9 specific commands\n",
 	"flash mem [SrcAddr]\n    - updates U-Boot with image in memory\n"
 );
-
diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/memsetup.S
index ab65901..98aec3d 100644
--- a/board/mpl/vcma9/memsetup.S
+++ b/board/mpl/vcma9/memsetup.S
@@ -153,14 +153,14 @@ memsetup:
 	ldrb	r3, [r2, #SDRAM_REG-PLD_BASE]
 	mov	r4, #SDRAMDATA1_END-SDRAMDATA
 	/* calculate start and end point */
-	mla	r0, r3, r4, r0 
+	mla	r0, r3, r4, r0
 	add     r2, r0, r4
 0:
 	ldr     r3, [r0], #4
 	str     r3, [r1], #4
 	cmp     r2, r0
 	bne     0b
-	
+
 	/* everything is fine now */
 	mov	pc, lr
 
@@ -194,7 +194,7 @@ SDRAMDATA1_END:
     .word 0x32 + BURST_EN
     .word 0x30
     .word 0x30
-    
+
 /* 2Mx8x4 (not implemented yet) */
     .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
     .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
@@ -202,7 +202,7 @@ SDRAMDATA1_END:
     .word 0x32 + BURST_EN
     .word 0x30
     .word 0x30
-    
+
 /* 4Mx8x2 (not implemented yet) */
     .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
     .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index cdf6163..4664488 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -190,21 +190,21 @@ nand_init(void)
 static u8 Get_PLD_ID(void)
 {
 	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
-	
+
 	return(pld->ID);
 }
 
 static u8 Get_PLD_BOARD(void)
 {
 	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
-	
+
 	return(pld->BOARD);
 }
 
 static u8 Get_PLD_SDRAM(void)
 {
 	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
-	
+
 	return(pld->SDRAM);
 }
 
@@ -253,7 +253,7 @@ static ulong Get_SDRAM_ChipSize(void)
 		case 2: return  8 * (1024*1024);
 		case 3: return  8 * (1024*1024);
 		default: return 0;
-	}	
+	}
 }
 static const char * Get_SDRAM_ChipGeom(void)
 {
@@ -339,10 +339,10 @@ int overwrite_console(void)
 * Print VCMA9 Info
 ************************************************************************/
 void print_vcma9_info(void)
-{	
+{
 	unsigned char s[50];
 	int i;
-	
+
 	if ((i = getenv_r("serial#", s, 32)) < 0) {
 		puts ("### No HW ID - assuming VCMA9");
 		printf("i %d", i*24);
diff --git a/board/omap1610inn/flash.c b/board/omap1610inn/flash.c
index 0108545..e7d6515 100644
--- a/board/omap1610inn/flash.c
+++ b/board/omap1610inn/flash.c
@@ -54,7 +54,6 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 #define mb() __asm__ __volatile__ ("" : : : "memory")
 
 
-
 /* Flash Organization Structure */
 typedef struct OrgDef {
 	unsigned int sector_number;
@@ -240,8 +239,6 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
 }
 
 
-
-
 /* unprotects a sector for write and erase
  * on some intel parts, this unprotects the entire chip, but it
  * wont hurt to call this additional times per sector...
@@ -298,8 +295,6 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	}
 
 
-
-
 	start = get_timer (0);
 	last = start;
 
@@ -326,7 +321,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 			while (((status =
 				*addr) & (FPW) 0x00800080) !=
 				(FPW) 0x00800080) {
-					if (get_timer_masked () > 
+					if (get_timer_masked () >
 					CFG_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
 					/* suspend erase     */
diff --git a/board/omap1610inn/platform.S b/board/omap1610inn/platform.S
index 9e3fc4f..cad152b 100644
--- a/board/omap1610inn/platform.S
+++ b/board/omap1610inn/platform.S
@@ -132,8 +132,6 @@ watch2Wait:
 	bne	watch2Wait
 
 
-
-
 	/* Set memory timings corresponding to the new clock speed */
 
 	/* Check execution location to determine current execution location
@@ -275,7 +273,7 @@ REG_ARM_CKCTL:			/* 16 bits */
 REG_ARM_IDLECT3:		/* 16 bits */
 	.word 0xfffece24
 REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08        
+	.word 0xfffece08
 REG_ARM_IDLECT1:		/* 16 bits */
 	.word 0xfffece04
 
@@ -293,7 +291,7 @@ REG_WSPRDOG:
 	.word 0xfffeb048
 /* watchdog write pending */
 REG_WWPSDOG:
-	.word 0xfffeb034 
+	.word 0xfffeb034
 
 WSPRDOG_VAL1:
 	.word 0x0000aaaa
@@ -342,7 +340,7 @@ REG_WATCHDOG:
 
 /* 96 MHz Samsung Mobile DDR */
 SDRAM_CONFIG_VAL:
-	.word 0x001200f4 
+	.word 0x001200f4
 
 DLL_LRD_CONTROL_VAL:
 	.word 0x00800002
diff --git a/board/omap1610inn/u-boot.lds b/board/omap1610inn/u-boot.lds
index 0a46054..cab0080 100644
--- a/board/omap1610inn/u-boot.lds
+++ b/board/omap1610inn/u-boot.lds
@@ -39,11 +39,11 @@ SECTIONS
 	.data : { *(.data) }
 	. = ALIGN(4);
 	.got : { *(.got) }
-	
+
 	__u_boot_cmd_start = .;
 	.u_boot_cmd : { *(.u_boot_cmd) }
 	__u_boot_cmd_end = .;
-	
+
 	armboot_end_data = .;
 	. = ALIGN(4);
 	.bss : { *(.bss) }
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index 60563d4..e50b747 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -533,11 +533,11 @@ int misc_init_r(void)
 	setenv("Daq128xSampling", "1");
     }
 
-    /* 
-     * Display the ADC/DAC clocking information 
+    /*
+     * Display the ADC/DAC clocking information
      */
     if (!quiet) {
-        Daq_Display_Clocks();
+	Daq_Display_Clocks();
     }
 
     /*
@@ -572,9 +572,9 @@ int misc_init_r(void)
      * 3) Write the I2C address to register 6
      * 4) Enable address matching by setting the MSB in register 7
      */
-    
+
     if (!quiet) {
-        printf("Initializing the ADC...\n");
+	printf("Initializing the ADC...\n");
     }
     udelay(ADC_INITIAL_DELAY);		/* 10uSec per uF of VREF cap */
 
@@ -720,7 +720,7 @@ int misc_init_r(void)
     I2C_TRISTATE;
 
     if (!quiet) {
-        printf("\n");
+	printf("\n");
     }
 
 #ifdef CONFIG_ETHER_LOOPBACK_TEST
@@ -795,14 +795,14 @@ void show_boot_progress (int status)
     if(status > 0) {
 	last_boot_progress = status;
     } else {
-        /* 
+	/*
 	 * If a specific failure code is given, flash this code
 	 * else just use the last success code we've seen
 	 */
 	if(status < -1)
 	    last_boot_progress = -status;
-	
-	/* 
+
+	/*
 	 * Flash this code 5 times
 	 */
 	for(j=0; j<5; j++) {
@@ -813,15 +813,15 @@ void show_boot_progress (int status)
 	    status_led_set(STATUS_LED_RED, STATUS_LED_ON);
 	    flash_code(last_boot_progress, 5, 3);
 
-	    /* 
-	     * Delay 5 seconds between repetitions, 
-	     * with the fault LED blinking 
+	    /*
+	     * Delay 5 seconds between repetitions,
+	     * with the fault LED blinking
 	     */
 	    for(i=0; i<5; i++) {
-	    	status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
-	    	udelay(500000);
-	    	status_led_set(STATUS_LED_RED, STATUS_LED_ON);
-	    	udelay(500000);
+		status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
+		udelay(500000);
+		status_led_set(STATUS_LED_RED, STATUS_LED_ON);
+		udelay(500000);
 	    }
 	}
 
diff --git a/board/sl8245/sl8245.c b/board/sl8245/sl8245.c
index 3f81f17..d5c1f34 100644
--- a/board/sl8245/sl8245.c
+++ b/board/sl8245/sl8245.c
@@ -92,4 +92,3 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
-
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index f9b04f8..53f1f2a 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -368,8 +368,8 @@ long int initdram (int board_type)
 	memctl->memc_or5 = CFG_OR5_ISP1362;
 	memctl->memc_br5 = CFG_BR5_ISP1362;
 #endif							/* CONFIG_ISP1362_USB */
-	    
-	    
+
+
 	return (size_b0 + size_b1);
 }
 
diff --git a/board/trab/memsetup.S b/board/trab/memsetup.S
index f59b0ac..0273b94 100644
--- a/board/trab/memsetup.S
+++ b/board/trab/memsetup.S
@@ -48,8 +48,8 @@
 #define BWSCON 0x14000000
 
 /* Bank0 */
-#define B0_Tacs	0x0	/* 0 clk */
-#define B0_Tcos	0x0	/* 0 clk */
+#define B0_Tacs	0x3	/* 4 clk */
+#define B0_Tcos	0x3	/* 4 clk */
 #define B0_Tacc	0x7	/* 14 clk */
 #define B0_Tcoh	0x0	/* 0 clk */
 #define B0_Tah	0x0	/* 0 clk */
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 5613281..4769f27 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -885,7 +885,6 @@ int do_thermo (char **argv)
 }
 
 
-
 int do_touch (char **argv)
 {
 	int     x, y;
@@ -1039,7 +1038,6 @@ static void touch_read_x_y (int *px, int *py)
 }
 
 
-
 int do_rs485 (char **argv)
 {
 	int timeout;
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index ad11860..df2d87f 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -38,7 +38,7 @@ void spi_init(void)
 	int i;
 
 	/* Configure I/O ports. */
- 	gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
+	gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
 	gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000;
 	gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000;
 	gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000;
@@ -48,7 +48,7 @@ void spi_init(void)
 	spi->ch[0].SPPRE = 0x1F; /* Baud-rate ca. 514kHz */
 	spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */
 	spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0,
-                                    CPHA=1 */
+				    CPHA=1 */
 
 	/* Dummy byte ensures clock to be low. */
 	for (i = 0; i < 10; i++) {
@@ -73,7 +73,7 @@ void tsc2000_write(unsigned short reg, unsigned short data)
 
 	SET_CS_TOUCH();
 	command = reg;
-        spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
+	spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
 	spi_wait_transmit_done();
 	spi->ch[0].SPTDAT = (command & 0x00FF);
 	spi_wait_transmit_done();
@@ -94,12 +94,12 @@ unsigned short tsc2000_read (unsigned short reg)
 	SET_CS_TOUCH();
 	command = 0x8000 | reg;
 
-        spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
+	spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
 	spi_wait_transmit_done();
 	spi->ch[0].SPTDAT = (command & 0x00FF);
 	spi_wait_transmit_done();
 
-        spi->ch[0].SPTDAT = 0xFF;
+	spi->ch[0].SPTDAT = 0xFF;
 	spi_wait_transmit_done();
 	data = spi->ch[0].SPRDAT;
 	spi->ch[0].SPTDAT = 0xFF;
@@ -112,7 +112,7 @@ unsigned short tsc2000_read (unsigned short reg)
 
 void tsc2000_set_mux (unsigned int channel)
 {
-        S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
 	CLR_MUX1_ENABLE; CLR_MUX2_ENABLE;
 	CLR_MUX3_ENABLE; CLR_MUX4_ENABLE;
@@ -189,7 +189,7 @@ void tsc2000_set_mux (unsigned int channel)
 
 void tsc2000_set_range (unsigned int range)
 {
-        S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
 	switch (range) {
 	case 1:
@@ -216,8 +216,8 @@ u16 tsc2000_read_channel (unsigned int channel)
 	udelay(3 * TSC2000_DELAY_BASE);
 
 	tsc2000_write(TSC2000_REG_ADC, 0x2036);
-        adc_wait_conversion_done ();
-        res = tsc2000_read(TSC2000_REG_AUX1);
+	adc_wait_conversion_done ();
+	res = tsc2000_read(TSC2000_REG_AUX1);
 	return res;
 }
 
@@ -225,36 +225,36 @@ u16 tsc2000_read_channel (unsigned int channel)
 s32 tsc2000_contact_temp (void)
 {
 	long adc_pt1000, offset;
-        long u_pt1000;
+	long u_pt1000;
 	long contact_temp;
 
 
-        tsc2000_reg_init ();
+	tsc2000_reg_init ();
 	tsc2000_set_range (3);
 
-        adc_pt1000 = tsc2000_read_channel (14);
-        debug ("read channel 14 (pt1000 adc value): %ld\n", adc_pt1000);
-
-        offset = tsc2000_read_channel (15);
-        debug ("read channel 15 (offset): %ld\n", offset);
-
-        /*
-         * Formula for calculating voltage drop on PT1000 resistor: u_pt1000 =
-         * x_range3 * (adc_raw - offset) / 10. Formula to calculate x_range3:
-         * x_range3 = (2500 * (1000000 + err_vref + err_amp3)) / (4095*6). The
-         * error correction Values err_vref and err_amp3 are assumed as 0 in
-         * u-boot, because this could cause only a very small error (< 1%).
-         */
-        u_pt1000 = (101750 * (adc_pt1000 - offset)) / 10;
-        debug ("u_pt1000: %ld\n", u_pt1000);
-
-        if (tsc2000_interpolate(u_pt1000, Pt1000_temp_table,
-                                &contact_temp) == -1) {
-                printf ("%s: error interpolating PT1000 vlaue\n",
-                         __FUNCTION__);
-                return (-1000);
-        }
-        debug ("contact_temp: %ld\n", contact_temp);
+	adc_pt1000 = tsc2000_read_channel (14);
+	debug ("read channel 14 (pt1000 adc value): %ld\n", adc_pt1000);
+
+	offset = tsc2000_read_channel (15);
+	debug ("read channel 15 (offset): %ld\n", offset);
+
+	/*
+	 * Formula for calculating voltage drop on PT1000 resistor: u_pt1000 =
+	 * x_range3 * (adc_raw - offset) / 10. Formula to calculate x_range3:
+	 * x_range3 = (2500 * (1000000 + err_vref + err_amp3)) / (4095*6). The
+	 * error correction Values err_vref and err_amp3 are assumed as 0 in
+	 * u-boot, because this could cause only a very small error (< 1%).
+	 */
+	u_pt1000 = (101750 * (adc_pt1000 - offset)) / 10;
+	debug ("u_pt1000: %ld\n", u_pt1000);
+
+	if (tsc2000_interpolate(u_pt1000, Pt1000_temp_table,
+				&contact_temp) == -1) {
+		printf ("%s: error interpolating PT1000 vlaue\n",
+			 __FUNCTION__);
+		return (-1000);
+	}
+	debug ("contact_temp: %ld\n", contact_temp);
 
 	return contact_temp;
 }
@@ -262,7 +262,7 @@ s32 tsc2000_contact_temp (void)
 
 void tsc2000_reg_init (void)
 {
-        S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
 	tsc2000_write(TSC2000_REG_ADC, 0x2036);
 	tsc2000_write(TSC2000_REG_REF, 0x0011);
@@ -315,5 +315,5 @@ int tsc2000_interpolate(long value, long data[][2], long *result)
 
 void adc_wait_conversion_done(void)
 {
-        while (!(tsc2000_read(TSC2000_REG_ADC) & (1 << 14)));
+	while (!(tsc2000_read(TSC2000_REG_ADC) & (1 << 14)));
 }
diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h
index e6efe18..aac9c0c 100644
--- a/board/trab/tsc2000.h
+++ b/board/trab/tsc2000.h
@@ -112,7 +112,7 @@
 #define TSC2000_NO_SENSOR	-0x10000
 
 #define ERROR_BATTERY   220     /* must be adjusted, if R68 is changed on
-                                 * TRAB */
+				 * TRAB */
 
 void tsc2000_write(unsigned short, unsigned short);
 unsigned short tsc2000_read (unsigned short);