Merge branch 'master' of git://www.denx.de/git/u-boot-blackfin

6 files changed, 1 insertions, 597 deletions

diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c
index 98ed6f8..738f69c 100644
--- a/board/bf533-ezkit/bf533-ezkit.c
+++ b/board/bf533-ezkit/bf533-ezkit.c
@@ -34,13 +34,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard(void)
 {
-#if (BFIN_CPU == ADSP_BF531)
-	printf("CPU:   ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
-#elif (BFIN_CPU == ADSP_BF532)
-	printf("CPU:   ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
-#else
-	printf("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
-#endif
 	printf("Board: ADI BF533 EZ-Kit Lite board\n");
 	printf("       Support: http://blackfin.uclinux.org/\n");
 	return 0;
diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c
index af03597..c4dde92 100644
--- a/board/bf533-stamp/bf533-stamp.c
+++ b/board/bf533-stamp/bf533-stamp.c
@@ -43,13 +43,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int checkboard(void)
 {
-#if (BFIN_CPU == ADSP_BF531)
-	printf("CPU:   ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28);
-#elif (BFIN_CPU == ADSP_BF532)
-	printf("CPU:   ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28);
-#else
-	printf("CPU:   ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
-#endif
 	printf("Board: ADI BF533 Stamp board\n");
 	printf("       Support: http://blackfin.uclinux.org/\n");
 	return 0;
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index e488844..cdffc33 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o flash.o ether_bf537.o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o
+COBJS	:= $(BOARD).o ether_bf537.o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c
index d279817..6ca8e21 100644
--- a/board/bf537-stamp/bf537-stamp.c
+++ b/board/bf537-stamp/bf537-stamp.c
@@ -31,7 +31,6 @@
 #include <asm/blackfin.h>
 #include <asm/io.h>
 #include <net.h>
-#include "ether_bf537.h"
 #include <asm/mach-common/bits/bootrom.h>
 
 /**
@@ -54,60 +53,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define POST_WORD_ADDR 0xFF903FFC
 
-/*
- * the bootldr command loads an address, checks to see if there
- *   is a Boot stream that the on-chip BOOTROM can understand,
- *   and loads it via the BOOTROM Callback. It is possible
- *   to also add booting from SPI, or TWI, but this function does
- *   not currently support that.
- */
-int do_bootldr(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-	ulong addr, entry;
-	ulong *data;
-
-	/* Get the address */
-	if (argc < 2) {
-		addr = load_addr;
-	} else {
-		addr = simple_strtoul(argv[1], NULL, 16);
-	}
-
-	/* Check if it is a LDR file */
-	data = (ulong *) addr;
-	if (*data == 0xFF800060 || *data == 0xFF800040 || *data == 0xFF800020) {
-		/* We want to boot from FLASH or SDRAM */
-		entry = _BOOTROM_BOOT_DXE_FLASH;
-		printf("## Booting ldr image at 0x%08lx ...\n", addr);
-		if (icache_status())
-			icache_disable();
-		if (dcache_status())
-			dcache_disable();
-
-	      __asm__("R7=%[a];\n" "P0=%[b];\n" "JUMP (P0);\n":
-	      :[a] "d"(addr),[b] "a"(entry)
-	      :"R7", "P0");
-
-	} else {
-		printf("## No ldr image at address 0x%08lx\n", addr);
-	}
-
-	return 0;
-}
-
-U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
-	   "bootldr - boot ldr image from memory\n",
-	   "[addr]\n         - boot ldr image stored in memory\n");
-
 int checkboard(void)
 {
-#if (BFIN_CPU == ADSP_BF534)
-	printf("CPU:   ADSP BF534 Rev.: 0.%d\n", *pCHIPID >> 28);
-#elif (BFIN_CPU == ADSP_BF536)
-	printf("CPU:   ADSP BF536 Rev.: 0.%d\n", *pCHIPID >> 28);
-#else
-	printf("CPU:   ADSP BF537 Rev.: 0.%d\n", *pCHIPID >> 28);
-#endif
 	printf("Board: ADI BF537 stamp board\n");
 	printf("       Support: http://blackfin.uclinux.org/\n");
 	return 0;
@@ -187,9 +134,6 @@ int misc_init_r(void)
 			pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]);
 		setenv("ethaddr", nid);
 	}
-	if (getenv("ethaddr")) {
-		SetupMacAddr(SrcAddr);
-	}
 #endif
 #endif				/* BFIN_BOOT_MODE == BF537_BYPASS_BOOT */
 
diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h
deleted file mode 100644
index 1fa7a10..0000000
--- a/board/bf537-stamp/flash-defines.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * U-boot - flash-defines.h
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#ifndef __FLASHDEFINES_H__
-#define __FLASHDEFINES_H__
-
-#include <common.h>
-
-#define V_ULONG(a)		(*(volatile unsigned long *)( a ))
-#define V_BYTE(a)		(*(volatile unsigned char *)( a ))
-#define TRUE			0x1
-#define FALSE			0x0
-#define BUFFER_SIZE		0x80000
-#define NO_COMMAND		0
-#define GET_CODES		1
-#define RESET			2
-#define WRITE			3
-#define FILL			4
-#define ERASE_ALL		5
-#define ERASE_SECT		6
-#define READ			7
-#define GET_SECTNUM		8
-#define FLASH_START_L		0x0000
-#define FLASH_START_H		0x2000
-#define FLASH_MAN_ST		2
-#define RESET_VAL		0xF0
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-
-int get_codes(void);
-int poll_toggle_bit(long lOffset);
-void reset_flash(void);
-int erase_flash(void);
-int erase_block_flash(int);
-void unlock_flash(long lOffset);
-int write_data(long lStart, long lCount, uchar * pnData);
-int read_flash(long nOffset, int *pnValue);
-int write_flash(long nOffset, int nValue);
-void get_sector_number(long lOffset, int *pnSector);
-int GetSectorProtectionStatus(flash_info_t * info, int nSector);
-int GetOffset(int nBlock);
-int AFP_NumSectors = 71;
-long AFP_SectorSize2 = 0x10000;
-int AFP_SectorSize1 = 0x2000;
-
-#define NUM_SECTORS		71
-
-#define WRITESEQ1		0x0AAA
-#define WRITESEQ2		0x0554
-#define WRITESEQ3		0x0AAA
-#define WRITESEQ4		0x0AAA
-#define WRITESEQ5		0x0554
-#define WRITESEQ6		0x0AAA
-#define WRITEDATA1		0xaa
-#define WRITEDATA2		0x55
-#define WRITEDATA3		0x80
-#define WRITEDATA4		0xaa
-#define WRITEDATA5		0x55
-#define WRITEDATA6		0x10
-#define PriFlashABegin		0
-#define SecFlashABegin		8
-#define SecFlashBBegin		36
-#define PriFlashAOff		0x0
-#define PriFlashBOff		0x100000
-#define SecFlashAOff		0x10000
-#define SecFlashBOff		0x280000
-#define INVALIDLOCNSTART	0x20270000
-#define INVALIDLOCNEND		0x20280000
-#define BlockEraseVal		0x30
-#define UNLOCKDATA1		0xaa
-#define UNLOCKDATA2		0x55
-#define UNLOCKDATA3		0xa0
-#define GETCODEDATA1		0xaa
-#define GETCODEDATA2		0x55
-#define GETCODEDATA3		0x90
-#define SecFlashASec1Off	0x200000
-#define SecFlashASec2Off	0x204000
-#define SecFlashASec3Off	0x206000
-#define SecFlashASec4Off	0x208000
-#define SecFlashAEndOff		0x210000
-#define SecFlashBSec1Off	0x280000
-#define SecFlashBSec2Off	0x284000
-#define SecFlashBSec3Off	0x286000
-#define SecFlashBSec4Off	0x288000
-#define SecFlashBEndOff		0x290000
-
-#define SECT32			32
-#define SECT33			33
-#define SECT34			34
-#define SECT35			35
-#define SECT36			36
-#define SECT37			37
-#define SECT38			38
-#define SECT39			39
-
-#define FLASH_SUCCESS	0
-#define FLASH_FAIL	-1
-
-#endif
diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c
deleted file mode 100644
index 8252c42..0000000
--- a/board/bf537-stamp/flash.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * U-boot - flash.c Flash driver for PSD4256GV
- *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc.
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-#include <malloc.h>
-#include <config.h>
-#include <asm/io.h>
-#include "flash-defines.h"
-
-void flash_reset(void)
-{
-	reset_flash();
-}
-
-unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag)
-{
-	int id = 0, i = 0;
-	static int FlagDev = 1;
-
-	id = get_codes();
-	if (FlagDev) {
-		FlagDev = 0;
-	}
-	info->flash_id = id;
-	switch (bank_flag) {
-	case 0:
-		for (i = PriFlashABegin; i < SecFlashABegin; i++)
-			info->start[i] = (baseaddr + (i * AFP_SectorSize1));
-		for (i = SecFlashABegin; i < NUM_SECTORS; i++)
-			info->start[i] =
-			    (baseaddr + SecFlashAOff +
-			     ((i - SecFlashABegin) * AFP_SectorSize2));
-		info->size = 0x400000;
-		info->sector_count = NUM_SECTORS;
-		break;
-	case 1:
-		info->start[0] = baseaddr + SecFlashASec1Off;
-		info->start[1] = baseaddr + SecFlashASec2Off;
-		info->start[2] = baseaddr + SecFlashASec3Off;
-		info->start[3] = baseaddr + SecFlashASec4Off;
-		info->size = 0x10000;
-		info->sector_count = 4;
-		break;
-	case 2:
-		info->start[0] = baseaddr + SecFlashBSec1Off;
-		info->start[1] = baseaddr + SecFlashBSec2Off;
-		info->start[2] = baseaddr + SecFlashBSec3Off;
-		info->start[3] = baseaddr + SecFlashBSec4Off;
-		info->size = 0x10000;
-		info->sector_count = 4;
-		break;
-	}
-	return (info->size);
-}
-
-unsigned long flash_init(void)
-{
-	unsigned long size_b;
-	int i;
-
-	size_b = 0;
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	size_b = flash_get_size(CFG_FLASH_BASE, &flash_info[0], 0);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b == 0) {
-		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-		       size_b, size_b >> 20);
-	}
-
-	/* flash_protect (int flag, ulong from, ulong to, flash_info_t *info) */
-	(void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE,
-			    (flash_info[0].start[2] - 1), &flash_info[0]);
-#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
-	(void)flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF,
-			    &flash_info[0]);
-#endif
-
-	return (size_b);
-}
-
-void flash_print_info(flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id) {
-	case (STM_ID_29W320EB & 0xFFFF):
-	case (STM_ID_29W320DB & 0xFFFF):
-		printf("ST Microelectronics ");
-		break;
-	default:
-		printf("Unknown Vendor: (0x%08X) ", info->flash_id);
-		break;
-	}
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s",
-		       info->start[i], info->protect[i] ? " (RO)" : "     ");
-	}
-	printf("\n");
-	return;
-}
-
-int flash_erase(flash_info_t * info, int s_first, int s_last)
-{
-	int cnt = 0, i;
-	int prot, sect;
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-	if (prot)
-		printf("- Warning: %d protected sectors will not be erased!\n",
-		       prot);
-	else
-		printf("\n");
-
-	cnt = s_last - s_first + 1;
-
-#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
-	printf("Erasing Flash locations, Please Wait\n");
-	for (i = s_first; i <= s_last; i++) {
-		if (info->protect[i] == 0) {	/* not protected */
-			if (erase_block_flash(i) < 0) {
-				printf("Error Sector erasing \n");
-				return FLASH_FAIL;
-			}
-		}
-	}
-#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
-	if (cnt == FLASH_TOT_SECT) {
-		printf("Erasing flash, Please Wait \n");
-		if (erase_flash() < 0) {
-			printf("Erasing flash failed \n");
-			return FLASH_FAIL;
-		}
-	} else {
-		printf("Erasing Flash locations, Please Wait\n");
-		for (i = s_first; i <= s_last; i++) {
-			if (info->protect[i] == 0) {	/* not protected */
-				if (erase_block_flash(i) < 0) {
-					printf("Error Sector erasing \n");
-					return FLASH_FAIL;
-				}
-			}
-		}
-	}
-#endif
-	printf("\n");
-	return FLASH_SUCCESS;
-}
-
-int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int d;
-	if (addr % 2) {
-		read_flash(addr - 1 - CFG_FLASH_BASE, &d);
-		d = (int)((d & 0x00FF) | (*src++ << 8));
-		write_data(addr - 1, 2, (uchar *) & d);
-		write_data(addr + 1, cnt - 1, src);
-	} else
-		write_data(addr, cnt, src);
-	return FLASH_SUCCESS;
-}
-
-int write_data(long lStart, long lCount, uchar * pnData)
-{
-	long i = 0;
-	unsigned long ulOffset = lStart - CFG_FLASH_BASE;
-	int d;
-	int nSector = 0;
-	int flag = 0;
-
-	if (lCount % 2) {
-		flag = 1;
-		lCount = lCount - 1;
-	}
-
-	for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) {
-		get_sector_number(ulOffset, &nSector);
-		read_flash(ulOffset, &d);
-		if (d != 0xffff) {
-			printf
-			    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
-			     ulOffset);
-			return FLASH_FAIL;
-		}
-		unlock_flash(ulOffset);
-		d = (int)(pnData[i] | pnData[i + 1] << 8);
-		write_flash(ulOffset, d);
-		if (poll_toggle_bit(ulOffset) < 0) {
-			printf("Error programming the flash \n");
-			return FLASH_FAIL;
-		}
-		if ((i > 0) && (!(i % AFP_SectorSize2)))
-			printf(".");
-	}
-	if (flag) {
-		get_sector_number(ulOffset, &nSector);
-		read_flash(ulOffset, &d);
-		if (d != 0xffff) {
-			printf
-			    ("Flash not erased at offset 0x%x Please erase to reprogram \n",
-			     ulOffset);
-			return FLASH_FAIL;
-		}
-		unlock_flash(ulOffset);
-		d = (int)(pnData[i] | (d & 0xFF00));
-		write_flash(ulOffset, d);
-		if (poll_toggle_bit(ulOffset) < 0) {
-			printf("Error programming the flash \n");
-			return FLASH_FAIL;
-		}
-	}
-	return FLASH_SUCCESS;
-}
-
-int write_flash(long nOffset, int nValue)
-{
-	long addr;
-
-	addr = (CFG_FLASH_BASE + nOffset);
-	*(unsigned volatile short *)addr = nValue;
-	SSYNC();
-#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT)
-	if (icache_status())
-		udelay(CONFIG_CCLK_HZ / 1000000);
-#endif
-	return FLASH_SUCCESS;
-}
-
-int read_flash(long nOffset, int *pnValue)
-{
-	unsigned short *pFlashAddr =
-	    (unsigned short *)(CFG_FLASH_BASE + nOffset);
-
-	*pnValue = *pFlashAddr;
-
-	return TRUE;
-}
-
-int poll_toggle_bit(long lOffset)
-{
-	unsigned int u1, u2;
-	volatile unsigned long *FB =
-	    (volatile unsigned long *)(CFG_FLASH_BASE + lOffset);
-	while (1) {
-		u1 = *(volatile unsigned short *)FB;
-		u2 = *(volatile unsigned short *)FB;
-		u1 ^= u2;
-		if (!(u1 & 0x0040))
-			break;
-		if (!(u2 & 0x0020))
-			continue;
-		else {
-			u1 = *(volatile unsigned short *)FB;
-			u2 = *(volatile unsigned short *)FB;
-			u1 ^= u2;
-			if (!(u1 & 0x0040))
-				break;
-			else {
-				reset_flash();
-				return FLASH_FAIL;
-			}
-		}
-	}
-	return FLASH_SUCCESS;
-}
-
-void reset_flash(void)
-{
-	write_flash(WRITESEQ1, RESET_VAL);
-	/* Wait for 10 micro seconds */
-	udelay(10);
-}
-
-int erase_flash(void)
-{
-	write_flash(WRITESEQ1, WRITEDATA1);
-	write_flash(WRITESEQ2, WRITEDATA2);
-	write_flash(WRITESEQ3, WRITEDATA3);
-	write_flash(WRITESEQ4, WRITEDATA4);
-	write_flash(WRITESEQ5, WRITEDATA5);
-	write_flash(WRITESEQ6, WRITEDATA6);
-
-	if (poll_toggle_bit(0x0000) < 0)
-		return FLASH_FAIL;
-
-	return FLASH_SUCCESS;
-}
-
-int erase_block_flash(int nBlock)
-{
-	long ulSectorOff = 0x0;
-
-	if ((nBlock < 0) || (nBlock > AFP_NumSectors))
-		return FALSE;
-
-	/* figure out the offset of the block in flash */
-	if ((nBlock >= 0) && (nBlock < SecFlashABegin))
-		ulSectorOff = nBlock * AFP_SectorSize1;
-
-	else if ((nBlock >= SecFlashABegin) && (nBlock < NUM_SECTORS))
-		ulSectorOff =
-		    SecFlashAOff + (nBlock - SecFlashABegin) * AFP_SectorSize2;
-	/* no such sector */
-	else
-		return FLASH_FAIL;
-
-	write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1);
-	write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2);
-	write_flash((WRITESEQ3 | ulSectorOff), WRITEDATA3);
-	write_flash((WRITESEQ4 | ulSectorOff), WRITEDATA4);
-	write_flash((WRITESEQ5 | ulSectorOff), WRITEDATA5);
-
-	write_flash(ulSectorOff, BlockEraseVal);
-
-	if (poll_toggle_bit(ulSectorOff) < 0)
-		return FLASH_FAIL;
-	printf(".");
-
-	return FLASH_SUCCESS;
-}
-
-void unlock_flash(long ulOffset)
-{
-	unsigned long ulOffsetAddr = ulOffset;
-	ulOffsetAddr &= 0xFFFF0000;
-
-	write_flash((WRITESEQ1 | ulOffsetAddr), UNLOCKDATA1);
-	write_flash((WRITESEQ2 | ulOffsetAddr), UNLOCKDATA2);
-	write_flash((WRITESEQ3 | ulOffsetAddr), UNLOCKDATA3);
-}
-
-int get_codes()
-{
-	int dev_id = 0;
-
-	write_flash(WRITESEQ1, GETCODEDATA1);
-	write_flash(WRITESEQ2, GETCODEDATA2);
-	write_flash(WRITESEQ3, GETCODEDATA3);
-
-	read_flash(0x0402, &dev_id);
-	dev_id &= 0x0000FFFF;
-
-	reset_flash();
-
-	return dev_id;
-}
-
-void get_sector_number(long ulOffset, int *pnSector)
-{
-	int nSector = 0;
-	long lMainEnd = 0x400000;
-	long lBootEnd = 0x10000;
-
-	/* sector numbers for the FLASH A boot sectors */
-	if (ulOffset < lBootEnd) {
-		nSector = (int)ulOffset / AFP_SectorSize1;
-	}
-	/* sector numbers for the FLASH B boot sectors */
-	else if ((ulOffset >= lBootEnd) && (ulOffset < lMainEnd)) {
-		nSector = ((ulOffset / (AFP_SectorSize2)) + 7);
-	}
-	/* if it is a valid sector, set it */
-	if ((nSector >= 0) && (nSector < AFP_NumSectors))
-		*pnSector = nSector;
-
-}