arm: Remove omap3_mvblx board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

9 files changed, 0 insertions, 1183 deletions

diff --git a/board/matrix_vision/mvblx/Kconfig b/board/matrix_vision/mvblx/Kconfig
deleted file mode 100644
index adbc20a..0000000
--- a/board/matrix_vision/mvblx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OMAP3_MVBLX
-
-config SYS_BOARD
-	default "mvblx"
-
-config SYS_VENDOR
-	default "matrix_vision"
-
-config SYS_CONFIG_NAME
-	default "omap3_mvblx"
-
-endif
diff --git a/board/matrix_vision/mvblx/MAINTAINERS b/board/matrix_vision/mvblx/MAINTAINERS
deleted file mode 100644
index 2f9a153..0000000
--- a/board/matrix_vision/mvblx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MVBLX BOARD
-M:	Michael Jones <michael.jones@matrix-vision.de>
-S:	Maintained
-F:	board/matrix_vision/mvblx/
-F:	include/configs/omap3_mvblx.h
-F:	configs/omap3_mvblx_defconfig
diff --git a/board/matrix_vision/mvblx/Makefile b/board/matrix_vision/mvblx/Makefile
deleted file mode 100644
index c056eba..0000000
--- a/board/matrix_vision/mvblx/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y += mvblx.o fpga.o
-obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o
-
-ccflags-y += -Werror
diff --git a/board/matrix_vision/mvblx/config.mk b/board/matrix_vision/mvblx/config.mk
deleted file mode 100644
index de13072..0000000
--- a/board/matrix_vision/mvblx/config.mk
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# (C) Copyright 2006
-# Texas Instruments, <www.ti.com>
-#
-# Beagle Board uses OMAP3 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80008000
diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c
deleted file mode 100644
index 7f9b245..0000000
--- a/board/matrix_vision/mvblx/fpga.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * (C) Copyright 2011
- * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
- * Michael Jones, Matrix Vision GmbH, michael.jones@matrix-vision.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ACEX1K.h>
-#include <command.h>
-#include <asm/gpio.h>
-#include <linux/byteorder/generic.h>
-#include "fpga.h"
-
-#ifdef FPGA_DEBUG
-#define fpga_debug(fmt, args...)      printf("%s: "fmt, __func__, ##args)
-#else
-#define fpga_debug(fmt, args...)
-#endif
-
-Altera_CYC2_Passive_Serial_fns altera_fns = {
-	fpga_null_fn,   /* Altera_pre_fn */
-	fpga_config_fn,
-	fpga_status_fn,
-	fpga_done_fn,
-	fpga_wr_fn,
-	fpga_null_fn,
-	fpga_null_fn,
-};
-
-Altera_desc cyclone2 = {
-	Altera_CYC2,
-	fast_passive_parallel,
-	Altera_EP3C5_SIZE,
-	(void *) &altera_fns,
-	NULL,
-	0
-};
-
-#define GPIO_RESET		43
-#define GPIO_DCLK		65
-#define GPIO_nSTATUS	157
-#define GPIO_CONF_DONE	158
-#define GPIO_nCONFIG	159
-#define GPIO_DATA0		54
-#define GPIO_DATA1		55
-#define GPIO_DATA2		56
-#define GPIO_DATA3		57
-#define GPIO_DATA4		58
-#define GPIO_DATA5		60
-#define GPIO_DATA6		61
-#define GPIO_DATA7		62
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* return FPGA_SUCCESS on success, else FPGA_FAIL
- */
-int mvblx_init_fpga(void)
-{
-	fpga_debug("Initializing FPGA interface\n");
-	fpga_init();
-	fpga_add(fpga_altera, &cyclone2);
-
-	if (gpio_request(GPIO_DCLK, "dclk") ||
-			gpio_request(GPIO_nSTATUS, "nStatus") ||
-#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
-			gpio_request(GPIO_CONF_DONE, "conf_done") ||
-#endif
-			gpio_request(GPIO_nCONFIG, "nConfig") ||
-			gpio_request(GPIO_DATA0, "data0") ||
-			gpio_request(GPIO_DATA1, "data1") ||
-			gpio_request(GPIO_DATA2, "data2") ||
-			gpio_request(GPIO_DATA3, "data3") ||
-			gpio_request(GPIO_DATA4, "data4") ||
-			gpio_request(GPIO_DATA5, "data5") ||
-			gpio_request(GPIO_DATA6, "data6") ||
-			gpio_request(GPIO_DATA7, "data7")) {
-		printf("%s: error requesting GPIOs.", __func__);
-		return FPGA_FAIL;
-	}
-
-	/* set up outputs */
-	gpio_direction_output(GPIO_DCLK,  0);
-	gpio_direction_output(GPIO_nCONFIG, 0);
-	gpio_direction_output(GPIO_DATA0, 0);
-	gpio_direction_output(GPIO_DATA1, 0);
-	gpio_direction_output(GPIO_DATA2, 0);
-	gpio_direction_output(GPIO_DATA3, 0);
-	gpio_direction_output(GPIO_DATA4, 0);
-	gpio_direction_output(GPIO_DATA5, 0);
-	gpio_direction_output(GPIO_DATA6, 0);
-	gpio_direction_output(GPIO_DATA7, 0);
-
-	/* NB omap_free_gpio() resets to an input, so we can't
-	 * free ie. nCONFIG, or else the FPGA would reset
-	 * Q: presumably gpio_free() has the same effect?
-	 */
-
-	/* set up inputs */
-	gpio_direction_input(GPIO_nSTATUS);
-#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
-	gpio_direction_input(GPIO_CONF_DONE);
-#endif
-
-	fpga_config_fn(0, 1, 0);
-	udelay(60);
-
-	return FPGA_SUCCESS;
-}
-
-int fpga_null_fn(int cookie)
-{
-	return 0;
-}
-
-int fpga_config_fn(int assert, int flush, int cookie)
-{
-	fpga_debug("SET config : %s=%d\n", assert ? "low" : "high", assert);
-	if (flush) {
-		gpio_set_value(GPIO_nCONFIG, !assert);
-		udelay(1);
-		gpio_set_value(GPIO_nCONFIG, assert);
-	}
-
-	return assert;
-}
-
-int fpga_done_fn(int cookie)
-{
-	int result = 0;
-
-	/* since revA of BLX, we will not get this signal. */
-	udelay(10);
-#ifdef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
-	fpga_debug("not waiting for CONF_DONE.");
-	result = 1;
-#else
-	fpga_debug("CONF_DONE check ... ");
-	if (gpio_get_value(GPIO_CONF_DONE))  {
-		fpga_debug("high\n");
-		result = 1;
-	} else
-		fpga_debug("low\n");
-	gpio_free(GPIO_CONF_DONE);
-#endif
-
-	return result;
-}
-
-int fpga_status_fn(int cookie)
-{
-	int result = 0;
-	fpga_debug("STATUS check ... ");
-
-	result = gpio_get_value(GPIO_nSTATUS);
-
-	if (result < 0)
-		fpga_debug("error\n");
-	else if (result > 0)
-		fpga_debug("high\n");
-	else
-		fpga_debug("low\n");
-
-	return result;
-}
-
-static inline int _write_fpga(u8 byte)
-{
-	gpio_set_value(GPIO_DATA0, byte & 0x01);
-	gpio_set_value(GPIO_DATA1, (byte >> 1) & 0x01);
-	gpio_set_value(GPIO_DATA2, (byte >> 2) & 0x01);
-	gpio_set_value(GPIO_DATA3, (byte >> 3) & 0x01);
-	gpio_set_value(GPIO_DATA4, (byte >> 4) & 0x01);
-	gpio_set_value(GPIO_DATA5, (byte >> 5) & 0x01);
-	gpio_set_value(GPIO_DATA6, (byte >> 6) & 0x01);
-	gpio_set_value(GPIO_DATA7, (byte >> 7) & 0x01);
-
-	/* clock */
-	gpio_set_value(GPIO_DCLK, 1);
-	udelay(1);
-	gpio_set_value(GPIO_DCLK, 0);
-	udelay(1);
-
-	return 0;
-}
-
-int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
-{
-	unsigned char *data = (unsigned char *) buf;
-	int i;
-	int headerlen = len - cyclone2.size;
-
-	if (headerlen < 0)
-		return FPGA_FAIL;
-	else if (headerlen == sizeof(uint32_t)) {
-		const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */
-		char fpgavers_str[fpgavers_len];
-		snprintf(fpgavers_str, fpgavers_len, "0x%08x",
-				be32_to_cpup((uint32_t*)data));
-		setenv("fpgavers", fpgavers_str);
-	}
-
-	fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
-	for (i = headerlen; i < len; i++)
-		_write_fpga(data[i]);
-	fpga_debug("-%s\n", __func__);
-
-	return FPGA_SUCCESS;
-}
diff --git a/board/matrix_vision/mvblx/fpga.h b/board/matrix_vision/mvblx/fpga.h
deleted file mode 100644
index 411b039..0000000
--- a/board/matrix_vision/mvblx/fpga.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-extern int mvblx_init_fpga(void);
-
-extern int fpga_status_fn(int cookie);
-extern int fpga_config_fn(int assert, int flush, int cookie);
-extern int fpga_done_fn(int cookie);
-extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie);
-extern int fpga_null_fn(int cookie);
diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c
deleted file mode 100644
index c9d615b..0000000
--- a/board/matrix_vision/mvblx/mvblx.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * MATRIX VISION GmbH mvBlueLYNX-X
- *
- * Derived from Beagle and Overo
- *
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Sunil Kumar <sunilsaini05@gmail.com>
- *	Shashi Ranjan <shashiranjanmca05@gmail.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Richard Woodruff <r-woodruff2@ti.com>
- *	Syed Mohammed Khasim <khasim@ti.com>
- *
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <netdev.h>
-#include <twl4030.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mmc_host_def.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/gpio.h>
-#include <asm/mach-types.h>
-#include "mvblx.h"
-#include "fpga.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET)
-static void setup_net_chip(void);
-#endif /* CONFIG_CMD_NET */
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init();	/* in SRAM or SDRAM, finish GPMC */
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	return 0;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Configure board specific parts
- */
-int misc_init_r(void)
-{
-	printf("mvBlueLYNX-X\n");
-	if (get_cpu_family() == CPU_OMAP36XX)
-		setenv("mpurate", "1000");
-	else
-		setenv("mpurate", "600");
-
-	twl4030_power_init();
-
-#if defined(CONFIG_CMD_NET)
-	setup_net_chip();
-#endif /* CONFIG_CMD_NET */
-
-	mvblx_init_fpga();
-
-	mac_read_from_eeprom();
-
-	dieid_num_r();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_MVBLX();
-}
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
-	omap_mmc_init(0, 0, 0, -1, -1);
-	omap_mmc_init(1, 0, 0, -1, -1);
-	return 0;
-}
-
-void board_mmc_power_init(void)
-{
-	twl4030_power_mmc_init(0);
-	twl4030_power_mmc_init(1);
-}
-#endif
-
-#if defined(CONFIG_CMD_NET)
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- *		Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
-	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
-	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
-	/* Configure GPMC registers */
-	writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[0].config1);
-	writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[0].config2);
-	writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[0].config3);
-	writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[0].config4);
-	writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[0].config5);
-	writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[0].config6);
-	writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[0].config7);
-
-	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
-	writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
-		&ctrl_base->gpmc_nadv_ale);
-
-	/* Make GPIO 139 as output pin */
-	writel(readl(&gpio5_base->oe) & ~(GPIO11), &gpio5_base->oe);
-
-	/* Now send a pulse on the GPIO pin */
-	writel(GPIO11, &gpio5_base->setdataout);
-	udelay(1);
-	writel(GPIO11, &gpio5_base->cleardataout);
-	udelay(1);
-	writel(GPIO11, &gpio5_base->setdataout);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}
-
-int overwrite_console(void)
-{
-	/* return true if console should be overwritten */
-	return 0;
-}
-
-#endif /* CONFIG_CMD_NET */
diff --git a/board/matrix_vision/mvblx/mvblx.h b/board/matrix_vision/mvblx/mvblx.h
deleted file mode 100644
index 6c1c752..0000000
--- a/board/matrix_vision/mvblx/mvblx.h
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * (C) Copyright 2008
- * Dirk Behme <dirk.behme@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef _MVBLX_H_
-#define _MVBLX_H_
-
-#include <asm/arch/sys_proto.h>
-
-const omap3_sysinfo sysinfo = {
-	DDR_DISCRETE,
-	"OMAP3 mvBlueLYNX-X camera",
-	"no NAND",
-};
-
-/*
- * IEN  - Input Enable
- * IDIS - Input Disable
- * PTD  - Pull type Down
- * PTU  - Pull type Up
- * DIS  - Pull type selection is inactive
- * EN   - Pull type selection is active
- * M0   - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_MVBLX() \
- /*SDRC*/\
-	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
-	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
-	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
-	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
-	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
-	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
-	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
-	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
-	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
-	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
-	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
-	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
-	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
-	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
-	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
-	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
-	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
-	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
-	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
-	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
-	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
-	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
-	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
-	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
-	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
-	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
-	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
-	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
-	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
-	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
-	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
-	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
-	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
-	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
-	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
-	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
-	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
-	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) /*GPMC_A1*/\
-	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) /*GPMC_A2*/\
-	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) /*GPMC_A3*/\
-	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) /*GPMC_A4*/\
-	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) /*GPMC_A5*/\
-	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) /*GPMC_A6*/\
-	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) /*GPMC_A7*/\
-	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M4)) /*GPIO_41*/\
-	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M4)) /*GPIO_42*/\
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M4)) /*GPIO_43*/\
-	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) /*GPMC_D0*/\
-	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) /*GPMC_D1*/\
-	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) /*GPMC_D2*/\
-	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) /*GPMC_D3*/\
-	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) /*GPMC_D4*/\
-	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) /*GPMC_D5*/\
-	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) /*GPMC_D6*/\
-	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) /*GPMC_D7*/\
-	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) /*GPMC_D8*/\
-	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) /*GPMC_D9*/\
-	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) /*GPMC_D10*/\
-	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) /*GPMC_D11*/\
-	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) /*GPMC_D12*/\
-	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) /*GPMC_D13*/\
-	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) /*GPMC_D14*/\
-	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) /*GPMC_D15*/\
-	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
-	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
-	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
-	MUX_VAL(CP(GPMC_NCS3),		(IEN  | PTU | EN  | M4)) /*GPIO54*/\
-	MUX_VAL(CP(GPMC_NCS4),		(IEN  | PTU | EN  | M4)) /*GPIO55*/\
-	MUX_VAL(CP(GPMC_NCS5),		(IEN  | PTU | EN  | M4)) /*GPIO56*/\
-	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTU | EN  | M4)) /*GPIO57*/\
-	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M4)) /*GPIO58*/\
-	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN | M0)) /*GPMC_CLK*/\
-	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
-	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
-	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
-	MUX_VAL(CP(GPMC_NBE0_CLE),	(IEN  | PTU | EN  | M4)) /*GPIO60*/\
-	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M4)) /*GPIO61*/\
-	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTU | EN  | M4)) /*GPIO62*/\
-	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
-	MUX_VAL(CP(GPMC_WAIT3),		(IDIS  | PTU | EN  | M4)) /*GPIO65*/\
- /*DSS*/\
-	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
-	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
-	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
-	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
-	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M4)) /*not_used*/\
-	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M4)) /*not_used*/\
-	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M4)) /*not_used*/\
-	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M4)) /*not_used*/\
-	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M4)) /*not_used*/\
-	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M4)) /*not_used*/\
-	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
-	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
-	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
-	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
-	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
-	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
-	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
-	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
-	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
-	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
-	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
-	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
-	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\
-	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\
-	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\
-	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\
-	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\
- /*CAMERA*/\
-	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) /*CAM_HS */\
-	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) /*CAM_VS */\
-	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
-	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) /*CAM_PCLK*/\
-	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
-	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) /*CAM_D0*/\
-	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) /*CAM_D1*/\
-	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) /*CAM_D2*/\
-	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) /*CAM_D3*/\
-	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) /*CAM_D4*/\
-	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) /*CAM_D5*/\
-	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) /*CAM_D6*/\
-	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) /*CAM_D7*/\
-	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) /*CAM_D8*/\
-	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) /*CAM_D9*/\
-	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) /*CAM_D10*/\
-	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) /*CAM_D11*/\
-	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
-	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
-	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
-	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
-	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
-	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1*/\
-	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) /*CSI2_DY1*/\
- /*Audio Interface */\
-	MUX_VAL(CP(MCBSP2_FSX),		(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
-	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP2_CLKX*/\
-	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
-	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
- /*Expansion card 1*/\
-	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
-	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
-	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
-	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
-	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
-	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
-	MUX_VAL(CP(MMC1_DAT4),		(IDIS  | PTU | DIS  | M4)) /*GPIO_?*/\
-	MUX_VAL(CP(MMC1_DAT5),		(IDIS  | PTU | DIS  | M4)) /*GPIO_?*/\
-	MUX_VAL(CP(MMC1_DAT6),		(IDIS  | PTU | DIS  | M4)) /*GPIO_?*/\
-	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | DIS  | M7)) /*GPIO_129 disabled*/\
- /*Expansion card 2 */\
-	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | DIS  | M0)) /*MMC2_CLK*/\
-	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | DIS  | M0)) /*MMC2_CMD*/\
-	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT0*/\
-	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT1*/\
-	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT2*/\
-	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | DIS  | M0)) /*MMC2_DAT3*/\
-	MUX_VAL(CP(MMC2_DAT4),		(IDIS  | PTU | DIS  | M4)) /*GPIO_136*/\
-	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_137*/\
-	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | DIS  | M4)) /*GPIO_138*/\
-	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_139*/\
- /*Bluetooth*/\
-	MUX_VAL(CP(MCBSP3_DX),		(IDIS | PTD | DIS | M1)) /*UART2_CTS*/\
-	MUX_VAL(CP(MCBSP3_DR),		(IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
-	MUX_VAL(CP(MCBSP3_CLKX),	(IDIS | PTD | DIS | M1)) /*UART2_TX*/\
-	MUX_VAL(CP(MCBSP3_FSX),		(IDIS | PTD | DIS | M1)) /*UART2_RX*/\
- /*Modem Interface */\
-	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) /*UART1_TX*/\
-	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M4)) /*GPIO_149*/ \
-	MUX_VAL(CP(UART1_CTS),		(IEN | PTU | EN | M4)) /*GPIO_150*/ \
-	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) /*UART1_RX*/\
-	MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /*GPIO_156*/\
-	MUX_VAL(CP(MCBSP1_FSR),		(IEN | PTU | EN  | M4)) /*GPIO_157*/\
-	MUX_VAL(CP(MCBSP1_DX),		(IEN | PTU | DIS | M4)) /*GPIO_158 1-wire */\
-	MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_159*/\
-	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
-	MUX_VAL(CP(MCBSP1_FSX),		(IDIS | PTD | DIS | M4)) /*GPIO_161*/\
-	MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_162*/\
- /*Serial Interface*/\
-	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /*UART3_CTS_RCTX*/\
-	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\
-	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
-	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
-	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
-	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
-	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) /*HSUSB0_DIR*/\
-	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) /*HSUSB0_NXT*/\
-	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA0*/\
-	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA1*/\
-	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA2*/\
-	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA3*/\
-	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA4*/\
-	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA5*/\
-	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA6*/\
-	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DATA7*/\
-	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
-	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\
-	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) /*I2C2_SCL*/\
-	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) /*I2C2_SDA*/\
-	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /*I2C3_SCL*/\
-	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /*I2C3_SDA*/\
-	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /*I2C4_SCL*/\
-	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) /*I2C4_SDA*/\
-	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
-	MUX_VAL(CP(MCSPI1_CLK),		(IDIS  | PTU | DIS  | M4)) /*GPIO_171*/\
-	MUX_VAL(CP(MCSPI1_SIMO),	(IDIS  | PTU | DIS  | M4)) /*GPIO_172*/\
-	MUX_VAL(CP(MCSPI1_SOMI),	(IDIS  | PTU | DIS  | M4)) /*GPIO_173*/\
-	MUX_VAL(CP(MCSPI1_CS0),		(IDIS  | PTD | DIS  | M4)) /*GPIO_174*/\
-	MUX_VAL(CP(MCSPI1_CS3),		(IDIS  | PTU | DIS | M4)) /*GPIO_177*/\
- /* USB EHCI (port 2) not used */\
-	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) /*McSPI2_CLK*/\
-	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) /*McSPI2_SIMO*/\
-	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI2_SOMI*/\
-	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M0)) /*McSPI2_CS0*/\
-	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) /*McSPI2_CS1*/\
- /*Control and debug */\
-	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /*SYS_32K*/\
-	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
-	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) /*SYS_nIRQ*/\
-	MUX_VAL(CP(SYS_BOOT0),		(IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\
-	MUX_VAL(CP(SYS_BOOT1),		(IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\
-	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M0)) /*GPIO_4*/\
-	MUX_VAL(CP(SYS_BOOT3),		(IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\
-	MUX_VAL(CP(SYS_BOOT4),		(IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\
-	MUX_VAL(CP(SYS_BOOT5),		(IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\
-	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ \
-	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MODE*/\
-	MUX_VAL(CP(SYS_CLKOUT1),	(IDIS  | PTD | DIS | M4)) /*GPIO_10*/\
-	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTD | DIS  | M0)) /*SYS_CLKOUT2*/\
- /* USB EHCI (port 1) */\
-	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M3)) /*HSUSB1_STP*/\
-	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
-	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA0*/\
-	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA1*/\
-	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA2*/\
-	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA7*/\
-	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA4*/\
-	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA5*/\
-	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA6*/\
-	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DATA3*/\
-	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DIR*/\
-	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_NXT*/\
-	MUX_VAL(CP(ETK_D10_ES2),	(IEN | PTU | EN | M4)) /*GPIO_24*/\
-	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | DIS | M4)) /*GPIO_25*/\
-	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTU | DIS | M4)) /*GPIO_26*/\
-	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTU | DIS | M4)) /*GPIO_27*/\
-	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTU | DIS | M4)) /*GPIO_28*/\
-	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTU | DIS | M4)) /*GPIO_29*/\
- /*Die to Die */\
-	MUX_VAL(CP(D2D_MCAD1),		(IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
-	MUX_VAL(CP(D2D_MCAD2),		(IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
-	MUX_VAL(CP(D2D_MCAD3),		(IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
-	MUX_VAL(CP(D2D_MCAD4),		(IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
-	MUX_VAL(CP(D2D_MCAD5),		(IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
-	MUX_VAL(CP(D2D_MCAD6),		(IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
-	MUX_VAL(CP(D2D_MCAD7),		(IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
-	MUX_VAL(CP(D2D_MCAD8),		(IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
-	MUX_VAL(CP(D2D_MCAD9),		(IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
-	MUX_VAL(CP(D2D_MCAD10),		(IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
-	MUX_VAL(CP(D2D_MCAD11),		(IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
-	MUX_VAL(CP(D2D_MCAD12),		(IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
-	MUX_VAL(CP(D2D_MCAD13),		(IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
-	MUX_VAL(CP(D2D_MCAD14),		(IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
-	MUX_VAL(CP(D2D_MCAD15),		(IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
-	MUX_VAL(CP(D2D_MCAD16),		(IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
-	MUX_VAL(CP(D2D_MCAD17),		(IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
-	MUX_VAL(CP(D2D_MCAD18),		(IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
-	MUX_VAL(CP(D2D_MCAD19),		(IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
-	MUX_VAL(CP(D2D_MCAD20),		(IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
-	MUX_VAL(CP(D2D_MCAD21),		(IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
-	MUX_VAL(CP(D2D_MCAD22),		(IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
-	MUX_VAL(CP(D2D_MCAD23),		(IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
-	MUX_VAL(CP(D2D_MCAD24),		(IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
-	MUX_VAL(CP(D2D_MCAD25),		(IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
-	MUX_VAL(CP(D2D_MCAD26),		(IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
-	MUX_VAL(CP(D2D_MCAD27),		(IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
-	MUX_VAL(CP(D2D_MCAD28),		(IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
-	MUX_VAL(CP(D2D_MCAD29),		(IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
-	MUX_VAL(CP(D2D_MCAD30),		(IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
-	MUX_VAL(CP(D2D_MCAD31),		(IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
-	MUX_VAL(CP(D2D_MCAD32),		(IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
-	MUX_VAL(CP(D2D_MCAD33),		(IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
-	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
-	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
-	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
-	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26mi*/\
-	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespwron*/\
-	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswarm */\
-	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9nirq */\
-	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\
-	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) /*d2d_spint*/\
-	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) /*d2d_frint*/\
-	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq0*/\
-	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq1*/\
-	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq2*/\
-	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmareq3*/\
-	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrst*/\
-	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
-	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
-	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
-	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
-	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtck*/\
-	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
-	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeup*/\
-	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlereq*/\
-	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleack*/\
-	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
-	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
-	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) /*d2d_mread*/\
-	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) /*d2d_sread*/\
-	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusflag*/\
-	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusflag*/\
-	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
-	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
-
-#endif
diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c
deleted file mode 100644
index db42987..0000000
--- a/board/matrix_vision/mvblx/sys_eeprom.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor
- * York Sun (yorksun@freescale.com)
- * Haiying Wang (haiying.wang@freescale.com)
- * Timur Tabi (timur@freescale.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-
-/* #define DEBUG */
-
-/*
- * static eeprom: EEPROM layout
- */
-static struct __attribute__ ((__packed__)) eeprom {
-	u8 id[16];		/* 0x01 - 0x0F Type e.g. 100wG-5111 */
-	u8 sn[10];		/* 0x10 - 0x19 Serial Number */
-	u8 date[6];		/* 0x1A - 0x1F Build Date */
-	u8 mac[6];		/* 0x20 - 0x25 MAC address  */
-	u8 reserved[10];/* 0x26 - 0x2f reserved */
-	u32 crc;        /* x+1         CRC32 checksum */
-} e;
-
-/* Set to 1 if we've read EEPROM into memory */
-static int has_been_read;
-
-/**
- * show_eeprom - display the contents of the EEPROM
- */
-static void show_eeprom(void)
-{
-	unsigned int crc;
-	char safe_string[16];
-
-#ifdef DEBUG
-	int i;
-#endif
-	u8 *p;
-
-	/* ID */
-	strncpy(safe_string, (char *)e.id, sizeof(e.id));
-	safe_string[sizeof(e.id)-1] = 0;
-	printf("ID: mvBlueLYNX-X%s\n", safe_string);
-
-	/* Serial number */
-	strncpy(safe_string, (char *)e.sn, sizeof(e.sn));
-	safe_string[sizeof(e.sn)-1] = 0;
-	printf("SN: %s\n", safe_string);
-
-	/* Build date, BCD date values, as YYMMDDhhmmss */
-	printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n",
-		e.date[0], e.date[1], e.date[2],
-		e.date[3] & 0x7F, e.date[4], e.date[5],
-		e.date[3] & 0x80 ? "PM" : "");
-
-	/* Show MAC address  */
-	p = e.mac;
-	printf("Eth: %02x:%02x:%02x:%02x:%02x:%02x\n",
-		p[0], p[1], p[2], p[3],	p[4], p[5]);
-
-	crc = crc32(0, (void *)&e, sizeof(e) - 4);
-
-	if (crc == be32_to_cpu(e.crc))
-		printf("CRC: %08x\n", be32_to_cpu(e.crc));
-	else
-		printf("CRC: %08x (should be %08x)\n", be32_to_cpu(e.crc), crc);
-
-#ifdef DEBUG
-	printf("EEPROM dump: (0x%x bytes)\n", sizeof(e));
-	for (i = 0; i < sizeof(e); i++) {
-		if ((i % 16) == 0)
-			printf("%02X: ", i);
-		printf("%02X ", ((u8 *)&e)[i]);
-		if (((i % 16) == 15) || (i == sizeof(e) - 1))
-			printf("\n");
-	}
-#endif
-}
-
-/**
- * read_eeprom - read the EEPROM into memory
- */
-static int read_eeprom(void)
-{
-	int ret;
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
-	unsigned int bus;
-#endif
-
-	if (has_been_read)
-		return 0;
-
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
-	bus = i2c_get_bus_num();
-	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
-#endif
-
-	ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
-		(uchar *)&e, sizeof(e));
-
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
-	i2c_set_bus_num(bus);
-#endif
-
-#ifdef DEBUG
-	show_eeprom();
-#endif
-
-	has_been_read = (ret == 0) ? 1 : 0;
-
-	return ret;
-}
-
-/**
- *  update_crc - update the CRC
- *
- *  This function should be called after each update to the EEPROM structure,
- *  to make sure the CRC is always correct.
- */
-static void update_crc(void)
-{
-	u32 crc;
-
-	crc = crc32(0, (void *)&e, sizeof(e) - 4);
-	e.crc = cpu_to_be32(crc);
-}
-
-/**
- * prog_eeprom - write the EEPROM from memory
- */
-static int prog_eeprom(void)
-{
-	int ret = 0;
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
-	unsigned int bus;
-#endif
-
-	update_crc();
-
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
-	bus = i2c_get_bus_num();
-	i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM);
-#endif
-
-	ret = eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
-		(uchar *)&e, sizeof(e));
-
-	if (!ret) {
-		/* Verify the write by reading back the EEPROM and comparing */
-		struct eeprom e2;
-#ifdef DEBUG
-		printf("%s verifying...\n", __func__);
-#endif
-		ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,
-			(uchar *)&e2, sizeof(e2));
-
-		if (!ret && memcmp(&e, &e2, sizeof(e)))
-			ret = -1;
-	}
-
-#ifdef CONFIG_SYS_EEPROM_BUS_NUM
-	i2c_set_bus_num(bus);
-#endif
-
-	if (ret) {
-		printf("Programming failed.\n");
-		has_been_read = 0;
-		return -1;
-	}
-
-	printf("Programming passed.\n");
-	return 0;
-}
-
-/**
- * h2i - converts hex character into a number
- *
- * This function takes a hexadecimal character (e.g. '7' or 'C') and returns
- * the integer equivalent.
- */
-static inline u8 h2i(char p)
-{
-	if ((p >= '0') && (p <= '9'))
-		return p - '0';
-
-	if ((p >= 'A') && (p <= 'F'))
-		return (p - 'A') + 10;
-
-	if ((p >= 'a') && (p <= 'f'))
-		return (p - 'a') + 10;
-
-	return 0;
-}
-
-/**
- * set_date - stores the build date into the EEPROM
- *
- * This function takes a pointer to a string in the format "YYMMDDhhmmss"
- * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string,
- * and stores it in the build date field of the EEPROM local copy.
- */
-static void set_date(const char *string)
-{
-	unsigned int i;
-
-	if (strlen(string) != 12) {
-		printf("Usage: mac date YYMMDDhhmmss\n");
-		return;
-	}
-
-	for (i = 0; i < 6; i++)
-		e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]);
-
-	update_crc();
-}
-
-/**
- * set_mac_address - stores a MAC address into the EEPROM
- *
- * This function takes a pointer to MAC address string
- * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and
- * stores it in the MAC address field in the EEPROM local copy.
- */
-static void set_mac_address(const char *string)
-{
-	char *p = (char *) string;
-	unsigned int i;
-
-	for (i = 0; *p && (i < 6); i++) {
-		e.mac[i] = simple_strtoul(p, &p, 16);
-		if (*p == ':')
-			p++;
-	}
-
-	update_crc();
-}
-
-int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char cmd;
-
-	if (argc == 1) {
-		show_eeprom();
-		return 0;
-	}
-
-	cmd = argv[1][0];
-
-	if (cmd == 'r') {
-#ifdef DEBUG
-		printf("%s read\n", __func__);
-#endif
-		read_eeprom();
-		return 0;
-	}
-
-	if (argc == 2) {
-		switch (cmd) {
-		case 's':	/* save */
-#ifdef DEBUG
-			printf("%s save\n", __func__);
-#endif
-			prog_eeprom();
-			break;
-		default:
-			return cmd_usage(cmdtp);
-		}
-
-		return 0;
-	}
-
-	/* We know we have at least one parameter  */
-
-	switch (cmd) {
-	case 'n':	/* serial number */
-#ifdef DEBUG
-		printf("%s serial number\n", __func__);
-#endif
-		memset(e.sn, 0, sizeof(e.sn));
-		strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1);
-		update_crc();
-		break;
-	case 'd':	/* date BCD format YYMMDDhhmmss */
-		set_date(argv[2]);
-		break;
-	case 'e':	/* errata */
-		printf("mac errata not implemented\n");
-		break;
-	case 'i':	/* id */
-		memset(e.id, 0, sizeof(e.id));
-		strncpy((char *)e.id, argv[2], sizeof(e.id) - 1);
-		update_crc();
-		break;
-	case 'p':	/* ports */
-		printf("mac ports not implemented (always 1 port)\n");
-		break;
-	case '0' ... '9':
-		/* we only have "mac 0" but any digit can be used here */
-		set_mac_address(argv[2]);
-		break;
-	case 'h':	/* help */
-	default:
-		return cmd_usage(cmdtp);
-	}
-
-	return 0;
-}
-
-static inline int is_portrait(void)
-{
-	int i;
-	unsigned int orient_index = 0; /* idx of char which determines orientation */
-
-	for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) {
-		if (e.id[i] == '-') {
-			orient_index = i+1;
-			break;
-		}
-	}
-
-	return (orient_index &&
-			(e.id[orient_index] >= '5') && (e.id[orient_index] <= '8'));
-}
-
-int mac_read_from_eeprom(void)
-{
-	u32 crc, crc_offset = offsetof(struct eeprom, crc);
-	u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */
-#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf"
-#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf"
-
-	if (read_eeprom()) {
-		printf("EEPROM Read failed.\n");
-		return -1;
-	}
-
-	crc = crc32(0, (void *)&e, crc_offset);
-	crcp = (void *)&e + crc_offset;
-	if (crc != be32_to_cpu(*crcp)) {
-		printf("EEPROM CRC mismatch (%08x != %08x)\n", crc,
-			be32_to_cpu(e.crc));
-		return -1;
-	}
-
-	if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) &&
-		memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
-		char ethaddr[18];
-
-		sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
-			e.mac[0],
-			e.mac[1],
-			e.mac[2],
-			e.mac[3],
-			e.mac[4],
-			e.mac[5]);
-		/* Only initialize environment variables that are blank
-		 * (i.e. have not yet been set)
-		 */
-		if (!getenv("ethaddr"))
-			setenv("ethaddr", ethaddr);
-	}
-
-	if (memcmp(&e.sn, "\0\0\0\0\0\0\0\0\0\0", 10) &&
-		memcmp(&e.sn, "\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF", 10)) {
-		char serial_num[12];
-
-		strncpy(serial_num, (char *)e.sn, sizeof(e.sn) - 1);
-		/* Only initialize environment variables that are blank
-		 * (i.e. have not yet been set)
-		 */
-		if (!getenv("serial#"))
-			setenv("serial#", serial_num);
-	}
-
-	/* decide which fpga file to load depending on orientation */
-	if (is_portrait())
-		setenv("fpgafilename", FILENAME_PORTRAIT);
-	else
-		setenv("fpgafilename", FILENAME_LANDSCAPE);
-
-	/* TODO should I calculate CRC here? */
-	return 0;
-}
-
-#ifdef CONFIG_SERIAL_TAG
-void get_board_serial(struct tag_serialnr *serialnr)
-{
-	char *serial = getenv("serial#");
-
-	if (serial && (strlen(serial) > 3)) {
-		/* use the numerical part of the serial number LXnnnnnn */
-		serialnr->high = 0;
-		serialnr->low = simple_strtoul(serial + 2, NULL, 10);
-	} else {
-		serialnr->high = 0;
-		serialnr->low = 0;
-	}
-}
-#endif