Merge branch 'master' of http://git.denx.de/u-boot-sunxi

2 files changed, 36 insertions, 27 deletions

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index fa78720..c1ae6f5 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -18,7 +18,6 @@ config SUNXI_GEN_SUN6I
 
 choice
 	prompt "Sunxi SoC Variant"
-	optional
 
 config MACH_SUN4I
 	bool "sun4i (Allwinner A10)"
@@ -68,6 +67,12 @@ config MACH_SUN8I_A33
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
+config MACH_SUN8I_A83T
+	bool "sun8i (Allwinner A83T)"
+	select CPU_V7
+	select SUNXI_GEN_SUN6I
+	select SUPPORT_SPL
+
 config MACH_SUN8I_H3
 	bool "sun8i (Allwinner H3)"
 	select CPU_V7
@@ -77,22 +82,16 @@ config MACH_SUN8I_H3
 	select SUPPORT_SPL
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
-config MACH_SUN50I
-	bool "sun50i (Allwinner A64)"
-	select ARM64
-	select SUNXI_GEN_SUN6I
-
-config MACH_SUN8I_A83T
-	bool "sun8i (Allwinner A83T)"
-	select CPU_V7
-	select SUNXI_GEN_SUN6I
-	select SUPPORT_SPL
-
 config MACH_SUN9I
 	bool "sun9i (Allwinner A80)"
 	select CPU_V7
 	select SUNXI_GEN_SUN6I
 
+config MACH_SUN50I
+	bool "sun50i (Allwinner A64)"
+	select ARM64
+	select SUNXI_GEN_SUN6I
+
 endchoice
 
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
@@ -261,6 +260,7 @@ config MMC
 
 config MMC0_CD_PIN
 	string "Card detect pin for mmc0"
+	default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
 	default ""
 	---help---
 	Set the card detect pin for mmc0, leave empty to not use cd. This
@@ -368,6 +368,7 @@ config I2C0_ENABLE
 	bool "Enable I2C/TWI controller 0"
 	default y if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
 	default n if MACH_SUN6I || MACH_SUN8I
+	select CMD_I2C
 	---help---
 	This allows enabling I2C/TWI controller 0 by muxing its pins, enabling
 	its clock and setting up the bus. This is especially useful on devices
@@ -377,12 +378,14 @@ config I2C0_ENABLE
 config I2C1_ENABLE
 	bool "Enable I2C/TWI controller 1"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 
 config I2C2_ENABLE
 	bool "Enable I2C/TWI controller 2"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 
@@ -390,6 +393,7 @@ if MACH_SUN6I || MACH_SUN7I
 config I2C3_ENABLE
 	bool "Enable I2C/TWI controller 3"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 endif
@@ -399,6 +403,7 @@ config R_I2C_ENABLE
 	bool "Enable the PRCM I2C/TWI controller"
 	# This is used for the pmic on H3
 	default y if SY8106A_POWER
+	select CMD_I2C
 	---help---
 	Set this to y to enable the I2C controller which is part of the PRCM.
 endif
@@ -407,6 +412,7 @@ if MACH_SUN7I
 config I2C4_ENABLE
 	bool "Enable I2C/TWI controller 4"
 	default n
+	select CMD_I2C
 	---help---
 	See I2C0_ENABLE help text.
 endif
@@ -419,7 +425,7 @@ config AXP_GPIO
 
 config VIDEO
 	boolean "Enable graphical uboot console on HDMI, LCD or VGA"
-	depends on !MACH_SUN8I_A83T
+	depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I_A64
 	default y
 	---help---
 	Say Y here to add support for using a cfb console on the HDMI, LCD
@@ -535,6 +541,7 @@ config VIDEO_LCD_PANEL_I2C
 	bool "LCD panel needs to be configured via i2c"
 	depends on VIDEO
 	default n
+	select CMD_I2C
 	---help---
 	Say y here if the LCD panel needs to be configured via i2c. This
 	will add a bitbang i2c controller using gpios to talk to the LCD.
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 3cf3614..d09cf6d 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -133,15 +133,6 @@ int dram_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_MACH_SUN50I
-void dram_init_banksize(void)
-{
-	/* We need to reserve the first 16MB of RAM for ATF */
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE + (16 * 1024 * 1024);
-	gd->bd->bi_dram[0].size = get_effective_memsize() - (16 * 1024 * 1024);
-}
-#endif
-
 #if defined(CONFIG_NAND_SUNXI) && defined(CONFIG_SPL_BUILD)
 static void nand_pinmux_setup(void)
 {
@@ -483,10 +474,12 @@ void sunxi_board_init(void)
 #endif
 
 #if defined CONFIG_AXP152_POWER || defined CONFIG_AXP209_POWER || \
-	defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+	defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
+	defined CONFIG_AXP818_POWER
 	power_failed = axp_init();
 
-#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
+	defined CONFIG_AXP818_POWER
 	power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
 #endif
 	power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
@@ -494,11 +487,13 @@ void sunxi_board_init(void)
 #if !defined(CONFIG_AXP209_POWER) && !defined(CONFIG_AXP818_POWER)
 	power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
 #endif
-#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
+	defined CONFIG_AXP818_POWER
 	power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
 #endif
 
-#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || \
+	defined CONFIG_AXP818_POWER
 	power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
 #endif
 	power_failed |= axp_set_aldo2(CONFIG_AXP_ALDO2_VOLT);
@@ -509,11 +504,14 @@ void sunxi_board_init(void)
 	power_failed |= axp_set_aldo4(CONFIG_AXP_ALDO4_VOLT);
 #endif
 
-#if defined(CONFIG_AXP221_POWER) || defined(CONFIG_AXP818_POWER)
+#if defined(CONFIG_AXP221_POWER) || defined(CONFIG_AXP809_POWER) || \
+	defined(CONFIG_AXP818_POWER)
 	power_failed |= axp_set_dldo(1, CONFIG_AXP_DLDO1_VOLT);
 	power_failed |= axp_set_dldo(2, CONFIG_AXP_DLDO2_VOLT);
+#if !defined CONFIG_AXP809_POWER
 	power_failed |= axp_set_dldo(3, CONFIG_AXP_DLDO3_VOLT);
 	power_failed |= axp_set_dldo(4, CONFIG_AXP_DLDO4_VOLT);
+#endif
 	power_failed |= axp_set_eldo(1, CONFIG_AXP_ELDO1_VOLT);
 	power_failed |= axp_set_eldo(2, CONFIG_AXP_ELDO2_VOLT);
 	power_failed |= axp_set_eldo(3, CONFIG_AXP_ELDO3_VOLT);
@@ -524,6 +522,10 @@ void sunxi_board_init(void)
 	power_failed |= axp_set_fldo(2, CONFIG_AXP_FLDO2_VOLT);
 	power_failed |= axp_set_fldo(3, CONFIG_AXP_FLDO3_VOLT);
 #endif
+
+#if defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
+	power_failed |= axp_set_sw(IS_ENABLED(CONFIG_AXP_SW_ON));
+#endif
 #endif
 	printf("DRAM:");
 	ramsize = sunxi_dram_init();