powerpc: mpc85xx: remove P1_P2_RDB boards

These boards are still non-generic boards:
P1011RDB, P1022RDB, P2010RDB, P2020RDB

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com>

11 files changed, 0 insertions, 1108 deletions

diff --git a/board/freescale/p1_p2_rdb/Kconfig b/board/freescale/p1_p2_rdb/Kconfig
deleted file mode 100644
index d7ad35d..0000000
--- a/board/freescale/p1_p2_rdb/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_P1_P2_RDB
-
-config SYS_BOARD
-	default "p1_p2_rdb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "P1_P2_RDB"
-
-endif
diff --git a/board/freescale/p1_p2_rdb/MAINTAINERS b/board/freescale/p1_p2_rdb/MAINTAINERS
deleted file mode 100644
index aabf587..0000000
--- a/board/freescale/p1_p2_rdb/MAINTAINERS
+++ /dev/null
@@ -1,37 +0,0 @@
-P1_P2_RDB BOARD
-#M:	-
-S:	Maintained
-F:	board/freescale/p1_p2_rdb/
-F:	include/configs/P1_P2_RDB.h
-F:	configs/P1011RDB_defconfig
-F:	configs/P1011RDB_36BIT_defconfig
-F:	configs/P1011RDB_36BIT_SDCARD_defconfig
-F:	configs/P1011RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P1011RDB_NAND_defconfig
-F:	configs/P1011RDB_SDCARD_defconfig
-F:	configs/P1011RDB_SPIFLASH_defconfig
-F:	configs/P1020RDB_defconfig
-F:	configs/P1020RDB_36BIT_defconfig
-F:	configs/P1020RDB_36BIT_SDCARD_defconfig
-F:	configs/P1020RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P1020RDB_NAND_defconfig
-F:	configs/P1020RDB_SDCARD_defconfig
-F:	configs/P1020RDB_SPIFLASH_defconfig
-F:	configs/P2010RDB_defconfig
-F:	configs/P2010RDB_36BIT_defconfig
-F:	configs/P2010RDB_36BIT_SDCARD_defconfig
-F:	configs/P2010RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P2010RDB_NAND_defconfig
-F:	configs/P2010RDB_SDCARD_defconfig
-F:	configs/P2010RDB_SPIFLASH_defconfig
-F:	configs/P2020RDB_36BIT_defconfig
-F:	configs/P2020RDB_36BIT_SDCARD_defconfig
-F:	configs/P2020RDB_36BIT_SPIFLASH_defconfig
-F:	configs/P2020RDB_NAND_defconfig
-F:	configs/P2020RDB_SDCARD_defconfig
-F:	configs/P2020RDB_SPIFLASH_defconfig
-
-P2020RDB BOARD
-M:	Poonam Aggrwal <poonam.aggrwal@freescale.com>
-S:	Maintained
-F:	configs/P2020RDB_defconfig
diff --git a/board/freescale/p1_p2_rdb/Makefile b/board/freescale/p1_p2_rdb/Makefile
deleted file mode 100644
index a97bf45..0000000
--- a/board/freescale/p1_p2_rdb/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright 2009 Freescale Semiconductor, Inc.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-MINIMAL=
-
-ifdef CONFIG_SPL_BUILD
-ifdef CONFIG_SPL_INIT_MINIMAL
-MINIMAL=y
-endif
-endif
-
-ifdef MINIMAL
-
-obj-y	+= spl_minimal.o tlb.o law.o
-
-else
-ifdef CONFIG_SPL_BUILD
-obj-y += spl.o
-else
-obj-y	+= p1_p2_rdb.o
-obj-$(CONFIG_PCI)  += pci.o
-endif
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
-
-endif
diff --git a/board/freescale/p1_p2_rdb/README b/board/freescale/p1_p2_rdb/README
deleted file mode 100644
index cd66e58..0000000
--- a/board/freescale/p1_p2_rdb/README
+++ /dev/null
@@ -1,145 +0,0 @@
-Overview
---------
-P2020RDB is a Low End Dual core platform supporting the P2020 processor
-of QorIQ series. P2020 is an e500 based dual core SOC.
-
-Building U-boot
------------
-To build the u-boot for P2020RDB:
-	make P2020RDB_config
-	make
-
-NOR Flash Banks
------------
-RDB board for P2020 has two flash banks. They are both present on boot.
-
-Booting by default is always from the boot bank at 0xef00_0000.
-
-Memory Map
-----------
-0xef00_0000 - 0xef7f_ffff	Alternate bank		8MB
-0xe800_0000 - 0xefff_ffff	Boot bank		8MB
-
-0xef74_0000 - 0xef7f_ffff	Alternate u-boot address	768KB
-0xeff4_0000 - 0xefff_ffff	Boot u-boot address		768KB
-
-Switch settings to boot from the NOR flash banks
-------------------------------------------------
-SW4[8]=0 default NOR Flash bank
-SW4[8]=1 Alternate NOR Flash bank
-
-Flashing Images
----------------
-To place a new u-boot image in the alternate flash bank and then boot
-with that new image temporarily, use this:
-	tftp 1000000 u-boot.bin
-	erase ef740000 ef7fffff
-	cp.b 1000000 ef740000 c0000
-
-Now to boot from the alternate bank change the SW4[8] from 0 to 1.
-
-To program the image in the boot flash bank:
-	tftp 1000000 u-boot.bin
-	protect off all
-	erase eff40000 ffffffff
-	cp.b 1000000 eff40000 c0000
-
-Using the Device Tree Source File
----------------------------------
-To create the DTB (Device Tree Binary) image file,
-use a command similar to this:
-
-	dtc -b 0 -f -I dts -O dtb p2020rdb.dts > p2020rdb.dtb
-
-Likely, that .dts file will come from here;
-
-	linux-2.6/arch/powerpc/boot/dts/p2020rdb.dts
-
-Booting Linux
--------------
-Place a linux uImage in the TFTP disk area.
-
-	tftp 1000000 uImage.p2020rdb
-	tftp 2000000 rootfs.ext2.gz.uboot
-	tftp c00000 p2020rdb.dtb
-	bootm 1000000 2000000 c00000
-
-Implementing AMP(Asymmetric MultiProcessing)
----------------------------------------------
-1. Build kernel image for core0:
-
-	a. $ make 85xx/p1_p2_rdb_defconfig
-
-	b. $ make menuconfig
-	   - un-select "Processor support"->
-		"Symetric multi-processing support"
-
-	c. $ make uImage
-
-	d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core0
-
-2. Build kernel image for core1:
-
-	a. $ make 85xx/p1_p2_rdb_defconfig
-
-	b. $ make menuconfig
-	   - Un-select "Processor support"->
-		"Symetric multi-processing support"
-	   - Select "Advanced setup" ->
-		"Prompt for advanced kernel configuration options"
-		- Select
-			"Set physical address where the kernel is loaded"
-			and set it to 0x20000000, assuming core1 will
-			start from 512MB.
-		- Select "Set custom page offset address"
-		- Select "Set custom kernel base address"
-		- Select "Set maximum low memory"
-	   - "Exit" and save the selection.
-
-	c. $ make uImage
-
-	d. $ cp arch/powerpc/boot/uImage /tftpboot/uImage.core1
-
-3. Create dtb for core0:
-
-	$ dtc -I dts -O dtb -f -b 0
-		 arch/powerpc/boot/dts/p2020rdb_camp_core0.dts >
-		 /tftpboot/p2020rdb_camp_core0.dtb
-
-4. Create dtb for core1:
-
-	$ dtc -I dts -O dtb -f -b 1
-		 arch/powerpc/boot/dts/p2020rdb_camp_core1.dts >
-		 /tftpboot/p2020rdb_camp_core1.dtb
-
-5. Bring up two cores separately:
-
-	a. Power on the board, under u-boot prompt:
-		=> setenv <serverip>
-		=> setenv <ipaddr>
-		=> setenv bootargs root=/dev/ram rw console=ttyS0,115200
-	b. Bring up core1's kernel first:
-		=> setenv bootm_low 0x20000000
-		=> setenv bootm_size 0x10000000
-		=> tftp 21000000 uImage.core1
-		=> tftp 22000000 ramdiskfile
-		=> tftp 20c00000 p2020rdb_camp_core1.dtb
-		=> interrupts off
-		=> bootm start 21000000 22000000 20c00000
-		=> bootm loados
-		=> bootm ramdisk
-		=> bootm fdt
-		=> fdt boardsetup
-		=> fdt chosen $initrd_start $initrd_end
-		=> bootm prep
-		=> cpu 1 release $bootm_low - $fdtaddr -
-	c. Bring up core0's kernel(on the same u-boot console):
-		=> setenv bootm_low 0
-		=> setenv bootm_size 0x20000000
-		=> tftp 1000000 uImage.core0
-		=> tftp 2000000 ramdiskfile
-		=> tftp c00000 p2020rdb_camp_core0.dtb
-		=> bootm 1000000 2000000 c00000
-
-Please note only core0 will run u-boot, core1 starts kernel directly
-after "cpu release" command is issued.
diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c
deleted file mode 100644
index 98ee5f1..0000000
--- a/board/freescale/p1_p2_rdb/ddr.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Copyright 2009, 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/processor.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/io.h>
-#include <asm/fsl_law.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003F
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x00000000
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL		0x43000000	/* Type = DDR2*/
-#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
-#define CONFIG_SYS_DDR_TIMING_4		0x00000000
-#define CONFIG_SYS_DDR_TIMING_5		0x00000000
-
-#define CONFIG_SYS_DDR_TIMING_3_400	0x00010000
-#define CONFIG_SYS_DDR_TIMING_0_400	0x00260802
-#define CONFIG_SYS_DDR_TIMING_1_400	0x39355322
-#define CONFIG_SYS_DDR_TIMING_2_400	0x1f9048ca
-#define CONFIG_SYS_DDR_CLK_CTRL_400	0x02800000
-#define CONFIG_SYS_DDR_MODE_1_400	0x00480432
-#define CONFIG_SYS_DDR_MODE_2_400	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_400	0x06180100
-
-#define CONFIG_SYS_DDR_TIMING_3_533	0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_533	0x00260802
-#define CONFIG_SYS_DDR_TIMING_1_533	0x4c47c432
-#define CONFIG_SYS_DDR_TIMING_2_533	0x0f9848ce
-#define CONFIG_SYS_DDR_CLK_CTRL_533	0x02800000
-#define CONFIG_SYS_DDR_MODE_1_533	0x00040642
-#define CONFIG_SYS_DDR_MODE_2_533	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_533	0x08200100
-
-#define CONFIG_SYS_DDR_TIMING_3_667	0x00030000
-#define CONFIG_SYS_DDR_TIMING_0_667	0x55770802
-#define CONFIG_SYS_DDR_TIMING_1_667	0x5f599543
-#define CONFIG_SYS_DDR_TIMING_2_667	0x0fa074d1
-#define CONFIG_SYS_DDR_CLK_CTRL_667	0x03000000
-#define CONFIG_SYS_DDR_MODE_1_667	0x00040852
-#define CONFIG_SYS_DDR_MODE_2_667	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_667	0x0a280100
-
-#define CONFIG_SYS_DDR_TIMING_3_800	0x00040000
-#define CONFIG_SYS_DDR_TIMING_0_800	0x00770802
-#define CONFIG_SYS_DDR_TIMING_1_800	0x6f6b6543
-#define CONFIG_SYS_DDR_TIMING_2_800	0x0fa074d1
-#define CONFIG_SYS_DDR_CLK_CTRL_800	0x02800000
-#define CONFIG_SYS_DDR_MODE_1_800	0x00040852
-#define CONFIG_SYS_DDR_MODE_2_800	0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_800	0x0c300100
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_400 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_400,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_400,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_400,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_400,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_400,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_400,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_400,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_400,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_533 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_533,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_533,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_533,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_533,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_533,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_533,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_533,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_533,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_667 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_667,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_667,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_667,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_667,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_667,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_667,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_667,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_667,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
-	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
-	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
-	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
-	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
-	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
-	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
-	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
-	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
-	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
-	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
-	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
-	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
-	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
-	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
-	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
-	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
-	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
-	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
-	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
-	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
-	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL,
-	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
-	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
-	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram (void)
-{
-	fsl_ddr_cfg_regs_t ddr_cfg_regs;
-	size_t ddr_size;
-	struct cpu_type *cpu;
-	ulong ddr_freq, ddr_freq_mhz;
-
-	cpu = gd->arch.cpu;
-
-	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-
-#if defined(CONFIG_SYS_RAMBOOT)
-	return ddr_size;
-#endif
-	ddr_freq = get_ddr_freq(0);
-	ddr_freq_mhz = ddr_freq / 1000000;
-
-	printf("Configuring DDR for %ld T/s data rate\n", ddr_freq);
-
-	if(ddr_freq_mhz <= 400)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs));
-	else if(ddr_freq_mhz <= 533)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_533, sizeof(ddr_cfg_regs));
-	else if(ddr_freq_mhz <= 667)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_667, sizeof(ddr_cfg_regs));
-	else if(ddr_freq_mhz <= 800)
-		memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs));
-	else
-		panic("Unsupported DDR data rate %ld T/s\n", ddr_freq);
-
-	/* P1020 and it's derivatives support max 32bit DDR width */
-	if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) {
-		ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_32_BE;
-		ddr_cfg_regs.cs[0].bnds = 0x0000001F;
-	}
-
-	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0);
-
-	set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1);
-	return ddr_size;
-}
diff --git a/board/freescale/p1_p2_rdb/law.c b/board/freescale/p1_p2_rdb/law.c
deleted file mode 100644
index b60a27f..0000000
--- a/board/freescale/p1_p2_rdb/law.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
deleted file mode 100644
index 61ed466..0000000
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#include <tsec.h>
-#include <vsc7385.h>
-#include <netdev.h>
-#include <rtc.h>
-#include <i2c.h>
-#include <hwconfig.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define VSC7385_RST_SET		0x00080000
-#define SLIC_RST_SET		0x00040000
-#define SGMII_PHY_RST_SET	0x00020000
-#define PCIE_RST_SET		0x00010000
-#define RGMII_PHY_RST_SET	0x02000000
-
-#define USB_RST_CLR		0x04000000
-#define USB2_PORT_OUT_EN        0x01000000
-
-#define GPIO_DIR		0x060f0000
-
-#define BOARD_PERI_RST_SET	VSC7385_RST_SET | SLIC_RST_SET | \
-				SGMII_PHY_RST_SET | PCIE_RST_SET | \
-				RGMII_PHY_RST_SET
-
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-#define BOARDREV_C	0x00100000
-#define BOARDREV_D	0x00000000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	u32 val_gpdat, sysclk_gpio;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	sysclk_gpio = val_gpdat & SYSCLK_MASK;
-
-	if(sysclk_gpio == 0)
-		return SYSCLK_66;
-	else
-		return SYSCLK_100;
-
-	return 0;
-}
-
-#ifdef CONFIG_MMC
-int board_early_init_f (void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-	setbits_be32(&gur->pmuxcr,
-			(MPC85xx_PMUXCR_SDHC_CD |
-			 MPC85xx_PMUXCR_SDHC_WP));
-	return 0;
-}
-#endif
-
-int checkboard (void)
-{
-	u32 val_gpdat, board_rev_gpio;
-	volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	char board_rev = 0;
-	struct cpu_type *cpu;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	board_rev_gpio = val_gpdat & BOARDREV_MASK;
-	if (board_rev_gpio == BOARDREV_C)
-		board_rev = 'C';
-	else if (board_rev_gpio == BOARDREV_D)
-		board_rev = 'D';
-	else
-		panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
-
-	cpu = gd->arch.cpu;
-	printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
-
-	setbits_be32(&pgpio->gpdir, GPIO_DIR);
-
-/*
- * Bringing the following peripherals out of reset via GPIOs
- * 0 = reset and 1 = out of reset
- * GPIO12 - Reset to Ethernet Switch
- * GPIO13 - Reset to SLIC/SLAC devices
- * GPIO14 - Reset to SGMII_PHY_N
- * GPIO15 - Reset to PCIe slots
- * GPIO6  - Reset to RGMII PHY
- * GPIO5  - Reset to USB3300 devices 1 = reset and 0 = out of reset
- */
-	clrsetbits_be32(&pgpio->gpdat, USB_RST_CLR, BOARD_PERI_RST_SET);
-
-	return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR;
-
-	setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN);
-	setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN);
-	setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON);
-#endif
-	return 0;
-}
-
-int board_early_init_r(void)
-{
-	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-	int flash_esel = find_tlb_idx((void *)flashbase, 1);
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	unsigned int orig_bus = i2c_get_bus_num();
-	u8 i2c_data;
-
-	i2c_set_bus_num(1);
-	if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0,
-		1, &i2c_data, sizeof(i2c_data)) == 0) {
-		if (i2c_data & 0x2)
-			puts("NOR Flash Bank : Secondary\n");
-		else
-			puts("NOR Flash Bank : Primary\n");
-
-		if (i2c_data & 0x1) {
-			setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
-			puts("SD/MMC : 8-bit Mode\n");
-			puts("eSPI : Disabled\n");
-		} else {
-			puts("SD/MMC : 4-bit Mode\n");
-			puts("eSPI : Enabled\n");
-		}
-	} else {
-		puts("Failed reading I2C Chip 0x18 on bus 1\n");
-	}
-	i2c_set_bus_num(orig_bus);
-
-	/*
-	 * Remap Boot flash region to caching-inhibited
-	 * so that flash can be erased properly.
-	 */
-
-	/* Flush d-cache and invalidate i-cache of any FLASH data */
-	flush_dcache();
-	invalidate_icache();
-
-	if (flash_esel == -1) {
-		/* very unlikely unless something is messed up */
-		puts("Error: Could not find TLB for FLASH BASE\n");
-		flash_esel = 2;	/* give our best effort to continue */
-	} else {
-		/* invalidate existing TLB entry for flash */
-		disable_tlb(flash_esel);
-	}
-
-	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, flash_esel, BOOKE_PAGESZ_16M, 1);
-	rtc_reset();
-	return 0;
-}
-
-
-#ifdef CONFIG_TSEC_ENET
-int board_eth_init(bd_t *bis)
-{
-	struct fsl_pq_mdio_info mdio_info;
-	struct tsec_info_struct tsec_info[4];
-	int num = 0;
-	char *tmp;
-	unsigned int vscfw_addr;
-
-#ifdef CONFIG_TSEC1
-	SET_STD_TSEC_INFO(tsec_info[num], 1);
-	num++;
-#endif
-#ifdef CONFIG_TSEC2
-	SET_STD_TSEC_INFO(tsec_info[num], 2);
-	num++;
-#endif
-#ifdef CONFIG_TSEC3
-	SET_STD_TSEC_INFO(tsec_info[num], 3);
-	if (is_serdes_configured(SGMII_TSEC3)) {
-		puts("eTSEC3 is in sgmii mode.\n");
-		tsec_info[num].flags |= TSEC_SGMII;
-	}
-	num++;
-#endif
-	if (!num) {
-		printf("No TSECs initialized\n");
-		return 0;
-	}
-#ifdef CONFIG_VSC7385_ENET
-/* If a VSC7385 microcode image is present, then upload it. */
-	if ((tmp = getenv ("vscfw_addr")) != NULL) {
-		vscfw_addr = simple_strtoul (tmp, NULL, 16);
-		printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
-		if (vsc7385_upload_firmware((void *) vscfw_addr,
-					CONFIG_VSC7385_IMAGE_SIZE))
-			puts("Failure uploading VSC7385 microcode.\n");
-	} else
-		puts("No address specified for VSC7385 microcode.\n");
-#endif
-
-	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
-	mdio_info.name = DEFAULT_MII_NAME;
-	fsl_pq_mdio_init(bis, &mdio_info);
-
-	tsec_eth_init(bis, tsec_info, num);
-
-	return pci_eth_init(bis);
-}
-#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-extern void ft_pci_board_setup(void *blob);
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	const char *soc_usb_compat = "fsl-usb2-dr";
-	int err, usb1_off, usb2_off;
-	phys_addr_t base;
-	phys_size_t size;
-
-	ft_cpu_setup(blob, bd);
-
-	base = getenv_bootm_low();
-	size = getenv_bootm_size();
-
-#if defined(CONFIG_PCI)
-	ft_pci_board_setup(blob);
-#endif /* #if defined(CONFIG_PCI) */
-
-	fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#if defined(CONFIG_HAS_FSL_DR_USB)
-	fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
-	/* Delete eLBC node as it is muxed with USB2 controller */
-	if (hwconfig("usb2")) {
-		const char *soc_elbc_compat = "fsl,p1020-elbc";
-		int off = fdt_node_offset_by_compatible(blob, -1,
-			soc_elbc_compat);
-		if (off < 0) {
-			printf("WARNING: could not find compatible node %s\n",
-			       soc_elbc_compat);
-			return off;
-		}
-		err = fdt_del_node(blob, off);
-		if (err < 0) {
-			printf("WARNING: could not remove %s\n",
-			       soc_elbc_compat);
-			return err;
-		}
-		return 0;
-	}
-#endif
-	/* Delete USB2 node as it is muxed with eLBC */
-	usb1_off = fdt_node_offset_by_compatible(blob, -1,
-		soc_usb_compat);
-	if (usb1_off < 0) {
-		printf("WARNING: could not find compatible node %s\n",
-		       soc_usb_compat);
-		return usb1_off;
-	}
-	usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
-			soc_usb_compat);
-	if (usb2_off < 0) {
-		printf("WARNING: could not find compatible node %s\n",
-		       soc_usb_compat);
-		return usb2_off;
-	}
-	err = fdt_del_node(blob, usb2_off);
-	if (err < 0) {
-		printf("WARNING: could not remove %s\n", soc_usb_compat);
-		return err;
-	}
-
-	return 0;
-}
-
-#endif
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
deleted file mode 100644
index 745ebb1..0000000
--- a/board/freescale/p1_p2_rdb/pci.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_serdes.h>
-#include <asm/io.h>
-#include <asm/fsl_pci.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pci_init_board(void)
-{
-	fsl_pcie_init_board(0);
-}
-
-void ft_pci_board_setup(void *blob)
-{
-	FT_FSL_PCI_SETUP;
-}
diff --git a/board/freescale/p1_p2_rdb/spl.c b/board/freescale/p1_p2_rdb/spl.c
deleted file mode 100644
index f30c5fe..0000000
--- a/board/freescale/p1_p2_rdb/spl.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <nand.h>
-#include <i2c.h>
-#include <fsl_esdhc.h>
-#include <spi_flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	u32 val_gpdat, sysclk_gpio;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	sysclk_gpio = val_gpdat & SYSCLK_MASK;
-
-	if (sysclk_gpio == 0)
-		return SYSCLK_66;
-	else
-		return SYSCLK_100;
-
-	return 0;
-}
-
-phys_size_t get_effective_memsize(void)
-{
-	return CONFIG_SYS_L2_SIZE;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio, bus_clk;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-	console_init_f();
-
-	/* Set pmuxcr to allow both i2c1 and i2c2 */
-	setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
-	setbits_be32(&gur->pmuxcr,
-		     in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
-
-	/* Read back the register to synchronize the write. */
-	in_be32(&gur->pmuxcr);
-
-#ifdef CONFIG_SPL_SPI_BOOT
-	clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-	gd->bus_clk = bus_clk;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     bus_clk / 16 / CONFIG_BAUDRATE);
-#ifdef CONFIG_SPL_MMC_BOOT
-	puts("\nSD boot...\n");
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	puts("\nSPI Flash boot...\n");
-#endif
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	/* Pointer is writable since we allocated a register for it */
-	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
-	bd_t *bd;
-
-	memset(gd, 0, sizeof(gd_t));
-	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
-	memset(bd, 0, sizeof(bd_t));
-	gd->bd = bd;
-	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
-	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
-
-	probecpu();
-	get_clocks();
-	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
-			CONFIG_SPL_RELOC_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_initialize(bd);
-#endif
-	/* relocate environment function pointers etc. */
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_NAND_BOOT
-	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			    (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-#ifdef CONFIG_SPL_SPI_BOOT
-	spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
-			   (uchar *)CONFIG_ENV_ADDR);
-#endif
-
-	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
-	gd->env_valid = 1;
-
-	gd->ram_size = initdram(0);
-#ifdef CONFIG_SPL_NAND_BOOT
-	puts("Tertiary program loader running in sram...");
-#else
-	puts("Second program loader running in sram...\n");
-#endif
-
-#ifdef CONFIG_SPL_MMC_BOOT
-	mmc_boot();
-#elif defined(CONFIG_SPL_SPI_BOOT)
-	spi_boot();
-#elif defined(CONFIG_SPL_NAND_BOOT)
-	nand_boot();
-#endif
-}
diff --git a/board/freescale/p1_p2_rdb/spl_minimal.c b/board/freescale/p1_p2_rdb/spl_minimal.c
deleted file mode 100644
index 96a4d1c..0000000
--- a/board/freescale/p1_p2_rdb/spl_minimal.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ns16550.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <linux/compiler.h>
-#include <asm/fsl_law.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/global_data.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-#define SYSCLK_MASK	0x00200000
-#define BOARDREV_MASK	0x10100000
-
-#define SYSCLK_66	66666666
-#define SYSCLK_100	100000000
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
-	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
-	u32 val_gpdat, sysclk_gpio;
-
-	val_gpdat = in_be32(&pgpio->gpdat);
-	sysclk_gpio = val_gpdat & SYSCLK_MASK;
-
-	if (sysclk_gpio == 0)
-		return SYSCLK_66;
-	else
-		return SYSCLK_100;
-
-	return 0;
-}
-
-void board_init_f(ulong bootflag)
-{
-	u32 plat_ratio;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
-	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
-	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
-#endif
-
-	/* initialize selected port with appropriate baud rate */
-	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
-	plat_ratio >>= 1;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
-
-	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
-		     gd->bus_clk / 16 / CONFIG_BAUDRATE);
-
-	puts("\nNAND boot... ");
-
-	/* copy code to RAM and jump to it - this should not return */
-	/* NOTE - code has to be copied out of NAND buffer before
-	 * other blocks can be read.
-	 */
-	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
-}
-
-void board_init_r(gd_t *gd, ulong dest_addr)
-{
-	puts("\nSecond program loader running in sram...");
-	nand_boot();
-}
-
-void putc(char c)
-{
-	if (c == '\n')
-		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
-
-	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
-}
-
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c
deleted file mode 100644
index 73f5729..0000000
--- a/board/freescale/p1_p2_rdb/tlb.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
-			CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 */
-	/* *I*** - Covers boot page */
-	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 0, BOOKE_PAGESZ_4K, 1),
-
-	/* *I*G* - CCSRBAR */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 1, BOOKE_PAGESZ_1M, 1),
-
-#ifndef CONFIG_SPL_BUILD
-	/* W**G* - Flash/promjet, localbus */
-	/* This will be changed to *I*G* after relocation to RAM. */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
-			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
-			0, 2, BOOKE_PAGESZ_16M, 1),
-
-#if defined(CONFIG_PCI)
-	/* *I*G* - PCI */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 3, BOOKE_PAGESZ_1G, 1),
-
-	/* *I*G* - PCI I/O */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 4, BOOKE_PAGESZ_256K, 1),
-
-#endif /* #if defined(CONFIG_PCI) */
-#endif
-	/* *I*G - NAND */
-	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 5, BOOKE_PAGESZ_1M, 1),
-
-	/* *I*G - VSC7385 Switch */
-	SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 6, BOOKE_PAGESZ_1M, 1),
-
-#ifdef CONFIG_SYS_INIT_L2_ADDR
-	/* *I*G - L2SRAM */
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
-		      0, 11, BOOKE_PAGESZ_256K, 1),
-#if CONFIG_SYS_L2_SIZE >= (256 << 10)
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
-		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 12, BOOKE_PAGESZ_256K, 1),
-#endif
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || \
-	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 7, BOOKE_PAGESZ_1G, 1)
-#endif
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);