mpc8xx: remove RPXlite_dw, quantum board support

These boards are old enough and have no maintainers.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

12 files changed, 0 insertions, 1720 deletions

diff --git a/board/RPXlite_dw/Makefile b/board/RPXlite_dw/Makefile
deleted file mode 100644
index eff33cf..0000000
--- a/board/RPXlite_dw/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= RPXlite_dw.o flash.o
diff --git a/board/RPXlite_dw/README b/board/RPXlite_dw/README
deleted file mode 100644
index 9e2d0f4..0000000
--- a/board/RPXlite_dw/README
+++ /dev/null
@@ -1,161 +0,0 @@
-
-After following the step of Yoo. Jonghoon and Wolfgang Denk,
-I ported u-boot on RPXlite DW version board: RPXlite_DW or LITE_DW.
-
-There are at least three differences between the Yoo-ported RPXlite and the RPXlite_DW.
-
-Board(in U-Boot)	version(in EmbeddedPlanet)	CPU	SDRAM	FLASH
-RPXlite				RPXlite CW		850	16MB	4MB
-RPXlite_DW		RPXlite DW(EP 823 H1 DW)	823e	64MB	16MB
-
-This fireware is specially coded for EmbeddedPlanet Co. Software Development
-Platform(RPXlite DW),which has a NEC NL6448BC20-08 LCD panel.
-
-It has the following three features:
-
-1. 64MHz/48MHz system frequence setting options.
-The default setting is 48MHz.To get a 64MHz u-boot,just add
-'64' in make command,like
-
-make distclean
-make RPXlite_DW_64_config
-make all
-
-2. CONFIG_ENV_IS_IN_FLASH/CONFIG_ENV_IS_IN_NVRAM
-
-The default environment parameter is stored in FLASH because it is a common choice for
-environment parameter.So I make NVRAM as backup parameter storeage.The reason why I
-didn't use EEPROM for ENV is that PlanetCore V2.0 use EEPROM as environment parameter
-home.Because of the possibility of using two firewares on this board,I didn't
-'disturb' EEPROM.To get NVRAM support,you may use the following build command:
-
-make distclean
-make RPXlite_DW_NVRAM_config
-make all
-
-3. LCD panel support
-
-To support the Platform better,I added LCD panel(NL6448BC20-08) function.
-For the convenience of debug, CONFIG_PERBOOT was supported. So you just
-perss ENTER if you want to get a serial console in boot downcounting.
-Then you can switch to LCD and serial console freely just typing
-'run lcd' or 'run ser'. They are only vaild when CONFIG_LCD was enabled.
-
-To get a LCD support u-boot,you can do the following:
-
-make distclean
-make RPXlite_DW_LCD_config
-make all
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The basic make commands could be:
-
-make RPXlite_DW_config
-make RPXlite_DW_64_config
-make RPXlite_DW_LCD_config
-make RPXlite_DW_NVRAM_config
-
-BTW,you can combine the above features together and get a workable u-boot to meet your need.
-For example,to get a 64MHZ && ENV_IS_IN_FLASH && LCD panel support u-boot,you can type:
-
-make RPXlite_DW_NVRAM_64_LCD_config
-make all
-
-So other combining make commands could be:
-
-make RPXlite_DW_NVRAM_64_config
-make RPXlite_DW_NVRAM_LCD_config
-make RPXlite_DW_64_LCD_config
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The boot process by "make RPXlite_DW_config" could be:
-
-U-Boot 1.1.2 (Aug 29 2004 - 15:11:27)
-
-CPU:   PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB D-Cache
-Board: RPXlite_DW
-DRAM:  64 MB
-FLASH: 16 MB
-*** Warning - bad CRC, using default environment
-
-In:    serial
-Out:   serial
-Err:   serial
-Net:   SCC ETHERNET
-u-boot>
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-A word on the U-Boot environment variable setting and usage :
-
-In the beginning, you could just need very simple default environment variable setting,
-like[include/configs/RPXlite.h] :
-
-#define CONFIG_BOOTCOMMAND                                                      \
-	"bootp; "                                                               \
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "     \
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "   \
-	"bootm"
-
-This is enough for kernel NFS test. But as debug process goes on, you would expect
-to save some time on environment variable setting and u-boot/kernel updating.
-So the default environment variable setting would become more complicated. Just like
-the one I did in include/configs/RPXlite_DW.h.
-
-Two u-boot commands, ku and uu, should be careful to use. They were designed to update
-kernel and u-boot image file respectively. You must tftp your image to default address
-'100000' and then use them correctly. Yeah, you can create your own command to do this
-job. :-) The example u-boot image updating process could be :
-
-u-boot>t 100000 RPXlite_DW_LCD.bin
-Using SCC ETHERNET device
-TFTP from server 172.16.115.6; our IP address is 172.16.115.7
-Filename 'RPXlite_DW_LCD.bin'.
-Load address: 0x100000
-Loading: #############################
-done
-Bytes transferred = 144700 (2353c hex)
-u-boot>run uu
-Un-Protect Flash Sectors 0-4 in Bank # 1
-Erase Flash Sectors 0-4 in Bank # 1
-.... done
-Copy to Flash... done
-ff000000: 27051956 552d426f 6f742031 2e312e32    '..VU-Boot 1.1.2
-ff000010: 20284175 67203239 20323030 34202d20     (Aug 29 2004 -
-ff000020: 31353a32 303a3238 29000000 00000000    15:20:28).......
-ff000030: 00000000 00000000 00000000 00000000    ................
-ff000040: 00000000 00000000 00000000 00000000    ................
-ff000050: 00000000 00000000 00000000 00000000    ................
-ff000060: 00000000 00000000 00000000 00000000    ................
-ff000070: 00000000 00000000 00000000 00000000    ................
-ff000080: 00000000 00000000 00000000 00000000    ................
-ff000090: 00000000 00000000 00000000 00000000    ................
-ff0000a0: 00000000 00000000 00000000 00000000    ................
-ff0000b0: 00000000 00000000 00000000 00000000    ................
-ff0000c0: 00000000 00000000 00000000 00000000    ................
-ff0000d0: 00000000 00000000 00000000 00000000    ................
-ff0000e0: 00000000 00000000 00000000 00000000    ................
-ff0000f0: 00000000 00000000 00000000 00000000    ................
-u-boot updating finished
-u-boot>
-
-Also for environment updating, 'run eu' could let you erase OLD default environment variable
-and then use the working u-boot environment setting.
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Finally, if you want to keep the serial port to possible debug on spot for deployment, you
-just need to enable 'DEPLOYMENT' in RPXlite_DW.h as 'DEBUG' does. Only the special string
-defined by CONFIG_AUTOBOOT_STOP_STR like 'st' can stop the autoboot.
-
-I'd like to extend my heartfelt gratitute to kind people for helping me work it out.
-I would particually thank Wolfgang Denk for his nice help.
-
-Enjoy,
-
-Sam Song, samsongshu@yahoo.com.cn
-Institute of Electrical Machinery and Controls
-Shanghai University
-
-Oct. 11, 2004
diff --git a/board/RPXlite_dw/RPXlite_dw.c b/board/RPXlite_dw/RPXlite_dw.c
deleted file mode 100644
index 29d52de..0000000
--- a/board/RPXlite_dw/RPXlite_dw.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * (C) Copyright 2004
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Sam Song
- * U-Boot port on RPXlite DW board : RPXlite_DW or LITE_DW
- * Tested on working at 64MHz(CPU)/32MHz(BUS),48MHz/24MHz
- * with 64MB, 2 SDRAM Micron chips,MT48LC16M16A2-75.
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-static long int dram_size (long int, long int *, long int);
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] =
-{
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x1FF74C20, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
-	0x01FFCC20, 0x1FF74C20, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0x0F03CC02, 0x00AC0C24, 0x1FF74C25, /* last */
-	_NOT_USED_, _NOT_USED_, 0x0FA00C34,0x0FFFCC35,
-	_NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
-	0x01FFFC24, 0x1FF74C25, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 */
-	0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
-	0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, 0x0FFFCCB4,
-	/* INIT sequence RAM WORDS
-	 * SDRAM Initialization (offset 0x36 in UPMA RAM)
-	 * The above definition uses the remaining space
-	 * to establish an initialization sequence,
-	 * which is executed by a RUN command.
-	 * The sequence is COMMAND INHIBIT(NOP),Precharge,
-	 * Load Mode Register,NOP,Auto Refresh.
-	 */
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
-};
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	puts ("Board: RPXlite_DW\n") ;
-	return (0) ;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size9;
-
-	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR ;
-
-	memctl->memc_mar  = 0x00000088;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE)); /* no refresh yet */
-	/*Disable Periodic timer A. */
-
-	udelay(200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr  = 0x80002236; /* SDRAM bank 0 - refresh twice */
-
-	udelay(1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	/*Enable Periodic timer A */
-
-	udelay (1000);
-
-	 /* Check Bank 0 Memory Size
-	  * try 9 column mode
-	  */
-
-	size9 = dram_size (CONFIG_SYS_MAMR_9COL, SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE);
-
-	/*
-	 * Final mapping:
-	 */
-
-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-
-	udelay (1000);
-
-	return (size9);
-}
-
-void rpxlite_init (void)
-{
-	/* Enable NVRAM */
-	*((uchar *) BCSR0) |= BCSR0_ENNVRAM;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}
diff --git a/board/RPXlite_dw/flash.c b/board/RPXlite_dw/flash.c
deleted file mode 100644
index c8de5ef..0000000
--- a/board/RPXlite_dw/flash.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-Boot port on RPXlite board
- *
- * Some of flash control words are modified. (from 2x16bit device
- * to 4x8bit device)
- * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices
- * are not tested.
- *
- * (?) Does an RPXLite board which
- *	does not use AM29LV800 flash memory exist ?
- *	I don't know...
- */
-
-/* Yes,Yoo.They do use other FLASH for the board.
- *
- * Sam Song, IEMC. SHU, samsongshu@yahoo.com.cn
- * U-Boot port on RPXlite DW version board
- *
- * By now,it uses 4 AM29DL323DB90VI devices(4x8bit).
- * The total FLASH has 16MB(4x4MB).
- * I just made some necessary changes on the basis of Wolfgang and Yoo's job.
- *
- * June 8, 2004 */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions   vu_long : volatile unsigned long IN include/common.h
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0 ;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* If Monitor is in the cope of FLASH,then
-	 * protect this area by default in case for
-	 * other occupation. [SAM] */
-
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1,
-		      &flash_info[0]);
-#endif
-	flash_info[0].size = size_b0;
-	return (size_b0);
-}
-
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x00010000;
-		info->start[3] = base + 0x00018000;
-		info->start[4] = base + 0x00020000;
-		info->start[5] = base + 0x00028000;
-		info->start[6] = base + 0x00030000;
-		info->start[7] = base + 0x00038000;
-
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i-7) * 0x00040000);
-		}
-	} else {
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00010000;
-		info->start[i--] = base + info->size - 0x00018000;
-		info->start[i--] = base + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00040000;
-		}
-	}
-
-}
-
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AMDL323B:    printf ("AM29DL323B (32 Mbit, bottom boot sector)\n");
-				break;
-	/* I just add the FLASH_AMDL323B for RPXlite_DW BOARD. [SAM]  */
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-	printf ("  Size: %ld MB in %d Sectors\n",info->size >> 20, info->sector_count);
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",info->start[i],info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0xAAA] = 0x00AA00AA ;
-	addr[0x555] = 0x00550055 ;
-	addr[0xAAA] = 0x00900090 ;
-
-	value = addr[0] ;
-	switch (value & 0x00FF00FF) {
-	case AMD_MANUFACT:			/* AMD_MANUFACT =0x00010001 in flash.h */
-		info->flash_id = FLASH_MAN_AMD; /* FLASH_MAN_AMD=0x00000000 in flash.h */
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[2] ;			/* device ID		*/
-	switch (value & 0x00FF00FF) {
-	case (AMD_ID_LV400T & 0x00FF00FF):
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-	case (AMD_ID_LV400B & 0x00FF00FF):
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-	case (AMD_ID_LV800T & 0x00FF00FF):
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-	case (AMD_ID_LV800B & 0x00FF00FF):
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00400000;	/* Size doubled by yooth */
-		break;				/* => 4 MB		 */
-	case (AMD_ID_LV160T & 0x00FF00FF):
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-	case (AMD_ID_LV160B & 0x00FF00FF):
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-	case (AMD_ID_DL323B & 0x00FF00FF):
-		info->flash_id += FLASH_AMDL323B;
-		info->sector_count = 71;
-		info->size = 0x01000000;
-		break;                          /* => 16 MB(4x4MB)  */
-	/* AMD_ID_DL323B= 0x22532253  FLASH_AMDL323B= 0x0013
-	 * AMD_ID_DL323B could be found in <flash.h>.[SAM]
-	 * So we could get : flash_id = 0x00000013.
-	 * The first four-bit represents VEDOR ID,leaving others for FLASH ID. */
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-	/* FLASH_BTYPE=0x0001 mask for bottom boot sector type.If the last bit equals 1,
-	 * it means bottom boot flash. GOOD IDEA! [SAM]
-	 */
-
-	/* set sector offsets for bottom boot block type        */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x00010000;
-		info->start[3] = base + 0x00018000;
-		info->start[4] = base + 0x00020000;
-		info->start[5] = base + 0x00028000;
-		info->start[6] = base + 0x00030000;
-		info->start[7] = base + 0x00038000;
-
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i-7) * 0x00040000) ;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00010000;
-		info->start[i--] = base + info->size - 0x00018000;
-		info->start[i--] = base + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00040000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		/* info->protect[i] = addr[4] & 1 ; */
-		/* Mask it for disorder FLASH protection **[Sam]** */
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0xF0F0F0F0;	/* reset bank */
-	}
-	return (info->size);
-}
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0x80808080;
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long *)(info->start[sect]) ;
-			addr[0] = 0x30303030 ;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long *)(info->start[l_sect]);
-	while ((addr[0] & 0x80808080) != 0x80808080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (vu_long *)info->start[0];
-	addr[0] = 0xF0F0F0F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0xAAA] = 0xAAAAAAAA;
-	addr[0x555] = 0x55555555;
-	addr[0xAAA] = 0xA0A0A0A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds
deleted file mode 100644
index 0eb2fba..0000000
--- a/board/RPXlite_dw/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug
deleted file mode 100644
index 0ea27e8..0000000
--- a/board/RPXlite_dw/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/quantum/Makefile b/board/quantum/Makefile
deleted file mode 100644
index 6918f63..0000000
--- a/board/quantum/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= quantum.o fpga.o
diff --git a/board/quantum/fpga.c b/board/quantum/fpga.c
deleted file mode 100644
index 4bd391a..0000000
--- a/board/quantum/fpga.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-/* The DEBUG define must be before common to enable debugging */
-#undef DEBUG
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-#include "fpga.h"
-/* ------------------------------------------------------------------------- */
-
-#define MAX_ONES               226
-
-/* MPC850 port D */
-#define PD(bit) (1 << (15 - (bit)))
-# define FPGA_INIT             PD(11)	/* FPGA init pin (ppc input)     */
-# define FPGA_PRG              PD(12)	/* FPGA program pin (ppc output) */
-# define FPGA_CLK              PD(13)	/* FPGA clk pin (ppc output)     */
-# define FPGA_DATA             PD(14)	/* FPGA data pin (ppc output)    */
-# define FPGA_DONE             PD(15)	/* FPGA done pin (ppc input)     */
-
-
-/* DDR 0 - input, 1 - output */
-#define FPGA_INIT_PDDIR          FPGA_PRG | FPGA_CLK | FPGA_DATA	/* just set outputs */
-
-
-#define SET_FPGA(data)         immr->im_ioport.iop_pddat = (data)
-#define GET_FPGA               immr->im_ioport.iop_pddat
-
-#define FPGA_WRITE_1 {                                                    \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set data to 1  */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);  /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);}	/* set data to 1  */
-
-#define FPGA_WRITE_0 {                                                    \
-	SET_FPGA(FPGA_PRG |            FPGA_DATA);  /* set clock to 0 */  \
-	SET_FPGA(FPGA_PRG);                         /* set data to 0  */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK);              /* set clock to 1 */  \
-	SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);}	/* set data to 1  */
-
-
-int fpga_boot (unsigned char *fpgadata, int size)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	int i, index, len;
-	int count;
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	int j;
-	unsigned char data;
-#else
-	unsigned char b;
-	int bit;
-#endif
-
-	debug ("fpga_boot: fpgadata = %p, size = %d\n", fpgadata, size);
-
-	/* display infos on fpgaimage */
-	printf ("FPGA:");
-	index = 15;
-	for (i = 0; i < 4; i++) {
-		len = fpgadata[index];
-		printf (" %s", &(fpgadata[index + 1]));
-		index += len + 3;
-	}
-	printf ("\n");
-
-
-	index = 0;
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	/* search for preamble 0xFFFFFFFF */
-	while (1) {
-		if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
-		    && (fpgadata[index + 2] == 0xff)
-		    && (fpgadata[index + 3] == 0xff))
-			break;	/* preamble found */
-		else
-			index++;
-	}
-#else
-	/* search for preamble 0xFF2X */
-	for (index = 0; index < size - 1; index++) {
-		if ((fpgadata[index] == 0xff)
-		    && ((fpgadata[index + 1] & 0xf0) == 0x30))
-			break;
-	}
-	index += 2;
-#endif
-
-	debug ("FPGA: configdata starts at position 0x%x\n", index);
-	debug ("FPGA: length of fpga-data %d\n", size - index);
-
-	/*
-	 * Setup port pins for fpga programming
-	 */
-	immr->im_ioport.iop_pddir = FPGA_INIT_PDDIR;
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Init fpga by asserting and deasserting PROGRAM*
-	 */
-	SET_FPGA (FPGA_CLK | FPGA_DATA);
-
-	/* Wait for FPGA init line low */
-	count = 0;
-	while (GET_FPGA & FPGA_INIT) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout - 100us max, so use 3ms */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_LOW;
-		}
-	}
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/* deassert PROGRAM* */
-	SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA);
-
-	/* Wait for FPGA end of init period .  */
-	count = 0;
-	while (!(GET_FPGA & FPGA_INIT)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_INIT_HIGH;
-		}
-	}
-
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	debug ("write configuration data into fpga\n");
-	/* write configuration-data into fpga... */
-
-#ifdef CONFIG_SYS_FPGA_SPARTAN2
-	/*
-	 * Load uncompressed image into fpga
-	 */
-	for (i = index; i < size; i++) {
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		if ((i % 1024) == 0)
-			printf ("%6d out of %6d\r", i, size);	/* let them know we are alive */
-#endif
-
-		data = fpgadata[i];
-		for (j = 0; j < 8; j++) {
-			if ((data & 0x80) == 0x80) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			data <<= 1;
-		}
-	}
-	/* add some 0xff to the end of the file */
-	for (i = 0; i < 8; i++) {
-		data = 0xff;
-		for (j = 0; j < 8; j++) {
-			if ((data & 0x80) == 0x80) {
-				FPGA_WRITE_1;
-			} else {
-				FPGA_WRITE_0;
-			}
-			data <<= 1;
-		}
-	}
-#else
-	/* send 0xff 0x20 */
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_1;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-	FPGA_WRITE_0;
-
-	/*
-	 ** Bit_DeCompression
-	 **   Code 1           .. maxOnes     : n                 '1's followed by '0'
-	 **        maxOnes + 1 .. maxOnes + 1 : n - 1             '1's no '0'
-	 **        maxOnes + 2 .. 254         : n - (maxOnes + 2) '0's followed by '1'
-	 **        255                        :                   '1'
-	 */
-
-	for (i = index; i < size; i++) {
-		b = fpgadata[i];
-		if ((b >= 1) && (b <= MAX_ONES)) {
-			for (bit = 0; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-			FPGA_WRITE_0;
-		} else if (b == (MAX_ONES + 1)) {
-			for (bit = 1; bit < b; bit++) {
-				FPGA_WRITE_1;
-			}
-		} else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
-			for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
-				FPGA_WRITE_0;
-			}
-			FPGA_WRITE_1;
-		} else if (b == 255) {
-			FPGA_WRITE_1;
-		}
-	}
-#endif
-	debug ("\n\n");
-	debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
-	debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
-
-	/*
-	 * Check if fpga's DONE signal - correctly booted ?
-	 */
-
-	/* Wait for FPGA end of programming period .  */
-	count = 0;
-	while (!(GET_FPGA & FPGA_DONE)) {
-		udelay (1000);	/* wait 1ms */
-		/* Check for timeout */
-		if (count++ > 3) {
-			debug ("FPGA: Booting failed!\n");
-			return ERROR_FPGA_PRG_DONE;
-		}
-	}
-
-	debug ("FPGA: Booting successful!\n");
-	return 0;
-}
diff --git a/board/quantum/fpga.h b/board/quantum/fpga.h
deleted file mode 100644
index a9f4086..0000000
--- a/board/quantum/fpga.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * Virtex2 FPGA configuration support for the QUANTUM computer
- */
-int fpga_boot(unsigned char *fpgadata, int size);
-
-#define ERROR_FPGA_PRG_INIT_LOW  -1        /* Timeout after PRG* asserted   */
-#define ERROR_FPGA_PRG_INIT_HIGH -2        /* Timeout after PRG* deasserted */
-#define ERROR_FPGA_PRG_DONE      -3        /* Timeout after programming     */
diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c
deleted file mode 100644
index 17e3fc2..0000000
--- a/board/quantum/quantum.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <common.h>
-#include <mpc8xx.h>
-#include "fpga.h"
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-unsigned long flash_init (void);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFCC25
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 00h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x1FF74C20, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Read. (Offset 08h in UPMA RAM)
-	 */
-	0x0F03CC04, 0x00ACCC24, 0x00FFCC20, 0x00FFCC20,
-	0x01FFCC20, 0x1FF74C20, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Single Write. (Offset 18h in UPMA RAM)
-	 */
-	0x0F03CC02, 0x00AC0C24, 0x1FF74C25, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Burst Write. (Offset 20h in UPMA RAM)
-	 */
-	0x0F03CC00, 0x00AC0C20, 0x00FFFC20, 0x00FFFC22,
-	0x01FFFC24, 0x1FF74C25, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/*
-	 * Refresh. (Offset 30h in UPMA RAM)
-	 * (Initialization code at 0x36)
-	 */
-	0x0FF0CC24, 0xFFFFCC24, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, 0xEFFB8C34, 0x0FF74C34,
-	0x0FFACCB4, 0x0FF5CC34, 0x0FFCC34, 0x0FFFCCB4,
-
-	/*
-	 * Exception. (Offset 3Ch in UPMA RAM)
-	 */
-	0x0FEA8C34, 0x1FB54C34, 0xFFFFCC34, _NOT_USED_
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char buf[64];
-	int i;
-	int l = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board QUANTUM, Serial No: ");
-
-	for (i = 0; i < l; ++i) {
-		if (buf[i] == ' ')
-			break;
-		putc (buf[i]);
-	}
-	putc ('\n');
-	return (0);		/* success */
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size9;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/* Refresh clock prescalar */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000088;
-
-	/* Map controller banks 1 to the SDRAM bank */
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_9COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80002136;	/* SDRAM bank 0 */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/* Check Bank 0 Memory Size,
-	 * 9 column mode
-	 */
-	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
-			   SDRAM_MAX_SIZE);
-	/*
-	 * Final mapping:
-	 */
-	memctl->memc_or1 = ((-size9) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-	udelay (1000);
-
-	return (size9);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile ulong *addr;
-	ulong cnt, val, size;
-	ulong save[32];		/* to make test non-destructive */
-	unsigned char i = 0;
-
-	memctl->memc_mamr = mamr_value;
-
-	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
-		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
-
-		save[i++] = *addr;
-		*addr = ~cnt;
-	}
-
-	/* write 0 to base address */
-	addr = (volatile ulong *)base;
-	save[i] = *addr;
-	*addr = 0;
-
-	/* check at base address */
-	if ((val = *addr) != 0) {
-		/* Restore the original data before leaving the function.
-		 */
-		*addr = save[i];
-		for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-			addr = (volatile ulong *) base + cnt;
-			*addr = save[--i];
-		}
-		return (0);
-	}
-
-	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
-		addr = (volatile ulong *)(base + cnt);	/* pointer arith! */
-
-		val = *addr;
-		*addr = save[--i];
-
-		if (val != (~cnt)) {
-			size = cnt * sizeof (long);
-			/* Restore the original data before returning
-			 */
-			for (cnt <<= 1; cnt <= maxsize / sizeof (long);
-			     cnt <<= 1) {
-				addr = (volatile ulong *) base + cnt;
-				*addr = save[--i];
-			}
-			return (size);
-		}
-	}
-	return (maxsize);
-}
-
-/*
- * Miscellaneous intialization
- */
-int misc_init_r (void)
-{
-	char *fpga_data_str = getenv ("fpgadata");
-	char *fpga_size_str = getenv ("fpgasize");
-	void *fpga_data;
-	int fpga_size;
-	int status;
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	int flash_size;
-
-	/* Remap FLASH according to real size */
-	flash_size = flash_init ();
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-flash_size & 0xFFFF8000);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-	if (fpga_data_str && fpga_size_str) {
-		fpga_data = (void *) simple_strtoul (fpga_data_str, NULL, 16);
-		fpga_size = simple_strtoul (fpga_size_str, NULL, 10);
-
-		status = fpga_boot (fpga_data, fpga_size);
-		if (status != 0) {
-			printf ("\nFPGA: Booting failed ");
-			switch (status) {
-			case ERROR_FPGA_PRG_INIT_LOW:
-				printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_INIT_HIGH:
-				printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
-				break;
-			case ERROR_FPGA_PRG_DONE:
-				printf ("(Timeout: DONE not high after programming FPGA)\n ");
-				break;
-			}
-		}
-	}
-	return 0;
-}
diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds
deleted file mode 100644
index 0eb2fba..0000000
--- a/board/quantum/u-boot.lds
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/quantum/u-boot.lds.debug b/board/quantum/u-boot.lds.debug
deleted file mode 100644
index b2c562c..0000000
--- a/board/quantum/u-boot.lds.debug
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}