powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot

Most 85xx boards can be built as a 32-bit or a 36-bit.  Current code sometimes
displays which of these is actually built, but it's inconsistent.  This is
especially problematic since the "default" build for a given 85xx board can
be either one, so if you don't see a message, you can't always know which
size is being used.  Not only that, but each board includes code that displays
the message, so there is duplication.

The 'bdinfo' command has been updated to display this information, so
we don't need to display it at boot time.  The board-specific code is
deleted.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

11 files changed, 9 insertions, 52 deletions

diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index b1eecc4..a33c936 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -62,10 +62,6 @@ int checkboard (void)
 	else
 		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
-
 	/* Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
 	 */
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index c9f85c8..6d0bfde 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -68,12 +68,7 @@ int checkboard (void)
 	u8 vboot;
 	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-	puts("Board: MPC8536DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf ("Sys ID: 0x%02x, "
+	printf("Board: MPC8536DS Sys ID: 0x%02x, "
 		"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
 		in_8(pixis_base + PIXIS_PVER));
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index b20299e..33a02ba 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -45,11 +45,7 @@ int checkboard (void)
 	u8 vboot;
 	u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-	puts ("Board: MPC8572DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts ("(36-bit addrmap) ");
-#endif
-	printf ("Sys ID: 0x%02x, "
+	printf("Board: MPC8572DS Sys ID: 0x%02x, "
 		"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
 		in_8(pixis_base + PIXIS_PVER));
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 455569e..6a0a3a2 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -50,9 +50,6 @@ int checkboard(void)
 	else
 		puts ("Promjet\n");
 
-#ifdef CONFIG_PHYS_64BIT
-	printf ("       36-bit physical address map\n");
-#endif
 	return 0;
 }
 
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index b9e66f7..79a6ead 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -165,11 +165,7 @@ int checkboard(void)
 	struct cpu_type *cpu;
 
 	cpu = gd->cpu;
-	printf("Board: %sRDB ", cpu->name);
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap)");
-#endif
-	puts("\n");
+	printf("Board: %sRDB\n", cpu->name);
 
 	return 0;
 }
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 456d9b0..aca30f3 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -56,12 +56,8 @@ int checkboard(void)
 {
 	u8 sw;
 
-	puts("Board: P1022DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+	printf("Board: P1022DS Sys ID: 0x%02x, "
+	       "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
 
 	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index cfbae69..437eaf0 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -110,9 +110,7 @@ int checkboard (void)
 
 	cpu = gd->cpu;
 	printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
-#ifdef CONFIG_PHYS_64BIT
-	puts ("(36-bit addrmap) \n");
-#endif
+
 	setbits_be32(&pgpio->gpdir, GPIO_DIR);
 
 /*
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index a60c5a2..aa39260 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -225,13 +225,7 @@ int checkboard(void)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	u8 in, out, io_config, val;
 
-	printf("Board: %s ", CONFIG_BOARDNAME);
-
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf("CPLD: V%d.%d PCBA: V%d.0\n",
+	printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", CONFIG_BOARDNAME,
 		in_8(&cpld_data->cpld_rev_major) & 0x0F,
 		in_8(&cpld_data->cpld_rev_minor) & 0x0F,
 		in_8(&cpld_data->pcba_rev) & 0x0F);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index d3af6cf..e8d31a4 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -61,12 +61,8 @@ int checkboard(void)
 {
 	u8 sw;
 
-	puts("Board: P2020DS ");
-#ifdef CONFIG_PHYS_64BIT
-	puts("(36-bit addrmap) ");
-#endif
-
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+	printf("Board: P2020DS Sys ID: 0x%02x, "
+	       "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
 		in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
 
 	sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index 1f6a34b..976c8d2 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -54,10 +54,6 @@ int checkboard(void)
 	sw = CPLD_READ(fbank_sel);
 	printf("vBank: %d\n", sw & 0x1);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
-
 	/*
 	 * Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c
index c6c74f2..c7cca2a 100644
--- a/board/freescale/p3060qds/p3060qds.c
+++ b/board/freescale/p3060qds/p3060qds.c
@@ -68,9 +68,6 @@ int checkboard(void)
 	else
 		printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
 
-#ifdef CONFIG_PHYS_64BIT
-	puts("36-bit Addressing\n");
-#endif
 	puts("Reset Configuration Word (RCW):");
 	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
 		u32 rcw = in_be32(&gur->rcwsr[i]);