Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

6 files changed, 78 insertions, 34 deletions

diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
index 1c2d52d..8da973b 100644
--- a/board/samsung/dts/exynos5250-smdk5250.dts
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -79,4 +79,44 @@
 		samsung,slope		= <274761730>;
 		samsung,dc-value	= <25>;
 	};
+
+	fimd@14400000 {
+		samsung,vl-freq = <60>;
+		samsung,vl-col = <2560>;
+		samsung,vl-row = <1600>;
+		samsung,vl-width = <2560>;
+		samsung,vl-height = <1600>;
+
+		samsung,vl-clkp;
+		samsung,vl-dp;
+		samsung,vl-bpix = <4>;
+
+		samsung,vl-hspw = <32>;
+		samsung,vl-hbpd = <80>;
+		samsung,vl-hfpd = <48>;
+		samsung,vl-vspw = <6>;
+		samsung,vl-vbpd = <37>;
+		samsung,vl-vfpd = <3>;
+		samsung,vl-cmd-allow-len = <0xf>;
+
+		samsung,winid = <3>;
+		samsung,interface-mode = <1>;
+		samsung,dp-enabled = <1>;
+		samsung,dual-lcd-enabled = <0>;
+	};
+
+	dp@145b0000 {
+		samsung,lt-status = <0>;
+
+		samsung,master-mode = <0>;
+		samsung,bist-mode = <0>;
+		samsung,bist-pattern = <0>;
+		samsung,h-sync-polarity = <0>;
+		samsung,v-sync-polarity = <0>;
+		samsung,interlaced = <0>;
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+	};
 };
diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c
index c009ae5..5b9e82f 100644
--- a/board/samsung/smdk5250/clock_init.c
+++ b/board/samsung/smdk5250/clock_init.c
@@ -434,10 +434,10 @@ void system_clock_init()
 		val = readl(&clk->mux_stat_core1);
 	} while ((val | MUX_MPLL_SEL_MASK) != val);
 
-	clrbits_le32(&clk->src_core1, MUX_CPLL_SEL_MASK);
-	clrbits_le32(&clk->src_core1, MUX_EPLL_SEL_MASK);
-	clrbits_le32(&clk->src_core1, MUX_VPLL_SEL_MASK);
-	clrbits_le32(&clk->src_core1, MUX_GPLL_SEL_MASK);
+	clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK);
+	clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK);
+	clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK);
+	clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK);
 	tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
 		| MUX_GPLL_SEL_MASK;
 	do {
@@ -494,35 +494,35 @@ void system_clock_init()
 	val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
 			arm_clk_ratio->apll_sdiv);
 	writel(val, &clk->apll_con0);
-	while (readl(&clk->apll_con0) & APLL_CON0_LOCKED)
+	while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set MPLL */
 	writel(MPLL_CON1_VAL, &clk->mpll_con1);
 	val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
 	writel(val, &clk->mpll_con0);
-	while (readl(&clk->mpll_con0) & MPLL_CON0_LOCKED)
+	while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set BPLL */
 	writel(BPLL_CON1_VAL, &clk->bpll_con1);
 	val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
 	writel(val, &clk->bpll_con0);
-	while (readl(&clk->bpll_con0) & BPLL_CON0_LOCKED)
+	while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set CPLL */
 	writel(CPLL_CON1_VAL, &clk->cpll_con1);
 	val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
 	writel(val, &clk->cpll_con0);
-	while (readl(&clk->cpll_con0) & CPLL_CON0_LOCKED)
+	while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set GPLL */
 	writel(GPLL_CON1_VAL, &clk->gpll_con1);
 	val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
 	writel(val, &clk->gpll_con0);
-	while (readl(&clk->gpll_con0) & GPLL_CON0_LOCKED)
+	while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set EPLL */
@@ -530,7 +530,7 @@ void system_clock_init()
 	writel(EPLL_CON1_VAL, &clk->epll_con1);
 	val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
 	writel(val, &clk->epll_con0);
-	while (readl(&clk->epll_con0) & EPLL_CON0_LOCKED)
+	while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
 		;
 
 	/* Set VPLL */
@@ -538,7 +538,7 @@ void system_clock_init()
 	writel(VPLL_CON1_VAL, &clk->vpll_con1);
 	val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
 	writel(val, &clk->vpll_con0);
-	while (readl(&clk->vpll_con0) & VPLL_CON0_LOCKED)
+	while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
 		;
 
 	writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h
index a159601..34d8bc31 100644
--- a/board/samsung/smdk5250/setup.h
+++ b/board/samsung/smdk5250/setup.h
@@ -343,7 +343,7 @@
 #define TOP2_VAL		0x0110000
 
 /* CLK_SRC_PERIC0 */
-#define PWM_SEL		0
+#define PWM_SEL		6
 #define UART3_SEL	6
 #define UART2_SEL	6
 #define UART1_SEL	6
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 217c6df..8b09e1d 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -312,9 +312,10 @@ int board_eth_init(bd_t *bis)
 	u32 smc_bw_conf, smc_bc_conf;
 	struct fdt_sromc config;
 	fdt_addr_t base_addr;
-	int node;
 
 #ifdef CONFIG_OF_CONTROL
+	int node;
+
 	node = decode_sromc(gd->fdt_blob, &config);
 	if (node < 0) {
 		debug("%s: Could not find sromc configuration\n", __func__);
@@ -454,7 +455,7 @@ int board_early_init_f(void)
 #endif
 
 #ifdef CONFIG_LCD
-void cfg_lcd_gpio(void)
+void exynos_cfg_lcd_gpio(void)
 {
 	struct exynos5_gpio_part1 *gpio1 =
 		(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
@@ -471,6 +472,12 @@ void cfg_lcd_gpio(void)
 	s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
 }
 
+void exynos_set_dp_phy(unsigned int onoff)
+{
+	set_dp_phy_ctrl(onoff);
+}
+
+#ifndef CONFIG_OF_CONTROL
 vidinfo_t panel_info = {
 	.vl_freq	= 60,
 	.vl_col		= 2560,
@@ -494,10 +501,6 @@ vidinfo_t panel_info = {
 	.vl_cmd_allow_len = 0xf,
 
 	.win_id		= 3,
-	.cfg_gpio	= cfg_lcd_gpio,
-	.backlight_on	= NULL,
-	.lcd_power_on	= NULL,
-	.reset_lcd	= NULL,
 	.dual_lcd_enabled = 0,
 
 	.init_delay	= 0,
@@ -537,14 +540,16 @@ static struct edp_device_info edp_info = {
 };
 
 static struct exynos_dp_platform_data dp_platform_data = {
-	.phy_enable	= set_dp_phy_ctrl,
 	.edp_dev_info	= &edp_info,
 };
 
+#endif
 void init_panel_info(vidinfo_t *vid)
 {
+#ifndef CONFIG_OF_CONTROL
 	vid->rgb_mode   = MODE_RGB_P,
 
 	exynos_set_dp_platform_data(&dp_platform_data);
+#endif
 }
 #endif
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 9207646..e20fb3d 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -635,7 +635,7 @@ int board_early_init_f(void)
 	return 0;
 }
 
-static void lcd_reset(void)
+void exynos_reset_lcd(void)
 {
 	struct exynos4_gpio_part2 *gpio2 =
 		(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
@@ -755,10 +755,6 @@ vidinfo_t panel_info = {
 	.vl_cmd_allow_len = 0xf,
 
 	.win_id		= 3,
-	.cfg_gpio	= NULL,
-	.backlight_on	= NULL,
-	.lcd_power_on	= NULL,	/* lcd_power_on in mipi dsi driver */
-	.reset_lcd	= lcd_reset,
 	.dual_lcd_enabled = 0,
 
 	.init_delay	= 0,
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index e742707..9b2770f 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -384,7 +384,7 @@ static void init_pmic_lcd(void)
 		puts("LCD pmic initialisation error!\n");
 }
 
-static void lcd_cfg_gpio(void)
+void exynos_cfg_lcd_gpio(void)
 {
 	unsigned int i, f3_end = 4;
 
@@ -423,7 +423,7 @@ static void lcd_cfg_gpio(void)
 	spi_init();
 }
 
-static void reset_lcd(void)
+void exynos_reset_lcd(void)
 {
 	s5p_gpio_set_value(&gpio2->y4, 5, 1);
 	udelay(10000);
@@ -433,7 +433,7 @@ static void reset_lcd(void)
 	udelay(100);
 }
 
-static void lcd_power_on(void)
+void exynos_lcd_power_on(void)
 {
 	struct pmic *p = pmic_get("MAX8998_PMIC");
 
@@ -471,10 +471,6 @@ vidinfo_t panel_info = {
 	.vl_cmd_allow_len = 0xf,
 
 	.win_id		= 0,
-	.cfg_gpio	= lcd_cfg_gpio,
-	.backlight_on	= NULL,
-	.lcd_power_on	= lcd_power_on,
-	.reset_lcd	= reset_lcd,
 	.dual_lcd_enabled = 0,
 
 	.init_delay	= 0,
@@ -484,6 +480,16 @@ vidinfo_t panel_info = {
 	.mipi_enabled	= 0,
 };
 
+void exynos_cfg_ldo(void)
+{
+	ld9040_cfg_ldo();
+}
+
+void exynos_enable_ldo(unsigned int onoff)
+{
+	ld9040_enable_ldo(onoff);
+}
+
 void init_panel_info(vidinfo_t *vid)
 {
 	vid->logo_on	= 1;
@@ -498,9 +504,6 @@ void init_panel_info(vidinfo_t *vid)
 	vid->pclk_name = 1;	/* MPLL */
 	vid->sclk_div = 1;
 
-	vid->cfg_ldo = ld9040_cfg_ldo;
-	vid->enable_ldo = ld9040_enable_ldo;
-
 	setenv("lcdinfo", "lcd=ld9040");
 }