Merge branch 'master-sync' of git://git.denx.de/u-boot-arm

32 files changed, 1646 insertions, 81 deletions

diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c
index 0a44748..87f284c 100644
--- a/board/davinci/dm355evm/dm355evm.c
+++ b/board/davinci/dm355evm/dm355evm.c
@@ -92,8 +92,8 @@ int board_eth_init(bd_t *bis)
 static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip	*this = mtd->priv;
-	u32			wbase = (u32) this->IO_ADDR_W;
-	u32			rbase = (u32) this->IO_ADDR_R;
+	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
+	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
 
 	if (chip == 1) {
 		__set_bit(14, &wbase);
diff --git a/board/davinci/dm355leopard/Makefile b/board/davinci/dm355leopard/Makefile
new file mode 100644
index 0000000..26b0705
--- /dev/null
+++ b/board/davinci/dm355leopard/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/dm355leopard/config.mk b/board/davinci/dm355leopard/config.mk
new file mode 100644
index 0000000..d67df02
--- /dev/null
+++ b/board/davinci/dm355leopard/config.mk
@@ -0,0 +1,6 @@
+# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c
new file mode 100644
index 0000000..e89786e
--- /dev/null
+++ b/board/davinci/dm355leopard/dm355leopard.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio_defs.h>
+#include <asm/arch/nand_defs.h>
+#include "../common/misc.h"
+#include <net.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	struct davinci_gpio *gpio01_base =
+			(struct davinci_gpio *)DAVINCI_GPIO_BANK01;
+	struct davinci_gpio *gpio23_base =
+			(struct davinci_gpio *)DAVINCI_GPIO_BANK23;
+	struct davinci_gpio *gpio67_base =
+			(struct davinci_gpio *)DAVINCI_GPIO_BANK67;
+
+	gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	/* GIO 9 & 10 are used for IO */
+	writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3);
+
+	/* Interrupt set GIO 9 */
+	writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN);
+
+	/* set GIO 9 input */
+	writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir);
+
+	/* Both edge trigger GIO 9 */
+	writel((readl(&gpio01_base->set_rising) | (1 << 9)),
+						&gpio01_base->set_rising);
+	writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir);
+
+	/* output low */
+	writel((readl(&gpio01_base->set_data) & ~(1 << 5)),
+						&gpio01_base->set_data);
+
+	/* set GIO 10 output */
+	writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir);
+
+	/* output high */
+	writel((readl(&gpio01_base->set_data) | (1 << 10)),
+						&gpio01_base->set_data);
+
+	/* set GIO 32 output */
+	writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir);
+
+	/* output High */
+	writel((readl(&gpio23_base->set_data) | (1 << 0)),
+						&gpio23_base->set_data);
+
+	/* Enable UART1 MUX Lines */
+	writel((readl(PINMUX0) & ~3), PINMUX0);
+	writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir);
+	writel((readl(&gpio67_base->set_data) | (1 << 6)),
+						&gpio67_base->set_data);
+
+	return 0;
+}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+	return dm9000_initialize(bis);
+}
+#endif
+
+#ifdef CONFIG_NAND_DAVINCI
+int board_nand_init(struct nand_chip *nand)
+{
+	davinci_nand_init(nand);
+
+	return 0;
+}
+#endif
diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c
index 5b97060..290eb99 100644
--- a/board/davinci/dm365evm/dm365evm.c
+++ b/board/davinci/dm365evm/dm365evm.c
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2009 Texas Instruments Incorporated
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -79,8 +80,8 @@ int board_eth_init(bd_t *bis)
 static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip	*this = mtd->priv;
-	u32			wbase = (u32) this->IO_ADDR_W;
-	u32			rbase = (u32) this->IO_ADDR_R;
+	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
+	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
 
 	if (chip == 1) {
 		__set_bit(14, &wbase);
diff --git a/board/davinci/dm6467evm/Makefile b/board/davinci/dm6467evm/Makefile
new file mode 100644
index 0000000..26b0705
--- /dev/null
+++ b/board/davinci/dm6467evm/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o
+SOBJS	:=
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/dm6467evm/config.mk b/board/davinci/dm6467evm/config.mk
new file mode 100644
index 0000000..ca801c2
--- /dev/null
+++ b/board/davinci/dm6467evm/config.mk
@@ -0,0 +1,2 @@
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c
new file mode 100644
index 0000000..9605818
--- /dev/null
+++ b/board/davinci/dm6467evm/dm6467evm.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 0b4f0d4..af8a4a2 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -165,7 +165,7 @@ int board_init(void)
 
 	/* arch number of the board */
 #if defined(CONFIG_CPU9G20)
-	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260;
+	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20;
 #elif defined(CONFIG_CPU9260)
 	gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260;
 #endif
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index d9e2ae5..dadbeb6 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -50,9 +50,6 @@
  * The details of the setting of the serial gpmc setup are not available.
  * The values were provided by another party.
  */
-void enable_gpmc_cs_config(u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
-			u32 size);
-
 static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = {
 	0x00011000,
 	0x001F1F01,
@@ -129,7 +126,7 @@ int board_init (void)
 
 	/* Configure console support on zoom2 */
 	gpmc_config = gpmc_serial_TL16CP754C;
-	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[4],
+	enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3],
 			SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M);
 
 	/* board id for Linux */
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 2b64f44..4d8b579 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -73,8 +73,9 @@ static inline void delay(unsigned long loops)
 
 int board_init(void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
 	clk_power->LOCKTIME = 0xFFFFFF;
@@ -174,7 +175,7 @@ static inline void NF_Init(void)
 void
 nand_init(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	NF_Init();
 #ifdef DEBUG
@@ -190,21 +191,21 @@ nand_init(void)
 
 static u8 Get_PLD_ID(void)
 {
-	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+	VCMA9_PLD * const pld = VCMA9_get_base_PLD();
 
 	return(pld->ID);
 }
 
 static u8 Get_PLD_BOARD(void)
 {
-	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+	VCMA9_PLD * const pld = VCMA9_get_base_PLD();
 
 	return(pld->BOARD);
 }
 
 static u8 Get_PLD_SDRAM(void)
 {
-	VCMA9_PLD * const pld = VCMA9_GetBase_PLD();
+	VCMA9_PLD * const pld = VCMA9_get_base_PLD();
 
 	return(pld->SDRAM);
 }
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
index 220b705..f46e0e4 100644
--- a/board/mpl/vcma9/vcma9.h
+++ b/board/mpl/vcma9/vcma9.h
@@ -39,14 +39,14 @@ typedef enum {
 
 static inline void NF_Conf(u16 conf)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFCONF = conf;
 }
 
 static inline void NF_Cmd(u8 cmd)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFCMD = cmd;
 }
@@ -59,14 +59,14 @@ static inline void NF_CmdW(u8 cmd)
 
 static inline void NF_Addr(u8 addr)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFADDR = addr;
 }
 
 static inline void NF_SetCE(NFCE_STATE s)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	switch (s) {
 		case NFCE_LOW:
@@ -81,35 +81,35 @@ static inline void NF_SetCE(NFCE_STATE s)
 
 static inline void NF_WaitRB(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	while (!(nand->NFSTAT & (1<<0)));
 }
 
 static inline void NF_Write(u8 data)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFDATA = data;
 }
 
 static inline u8 NF_Read(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	return(nand->NFDATA);
 }
 
 static inline void NF_Init_ECC(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	nand->NFCONF |= (1<<12);
 }
 
 static inline u32 NF_Read_ECC(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	return(nand->NFECC);
 }
@@ -128,7 +128,7 @@ typedef struct {
 } /*__attribute__((__packed__))*/ VCMA9_PLD;
 
 #define VCMA9_PLD_BASE	0x2C000100
-static inline VCMA9_PLD * VCMA9_GetBase_PLD(void)
+static inline VCMA9_PLD *VCMA9_get_base_PLD(void)
 {
 	return (VCMA9_PLD * const)VCMA9_PLD_BASE;
 }
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
index 2c47063..42bf008 100644
--- a/board/samsung/smdk2400/smdk2400.c
+++ b/board/samsung/smdk2400/smdk2400.c
@@ -46,8 +46,9 @@ extern int do_mdm_init; /* defined in common/main.c */
 
 int board_init (void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* memory and cpu-speed are setup before relocation */
 	/* change the clock to be 50 MHz 1:1:1 */
diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c
index 25c38e6..fde7730 100644
--- a/board/samsung/smdk2410/smdk2410.c
+++ b/board/samsung/smdk2410/smdk2410.c
@@ -68,8 +68,9 @@ static inline void delay (unsigned long loops)
 
 int board_init (void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
 	clk_power->LOCKTIME = 0xFFFFFF;
diff --git a/board/samsung/smdkc100/Makefile b/board/samsung/smdkc100/Makefile
new file mode 100644
index 0000000..808d0dd
--- /dev/null
+++ b/board/samsung/smdkc100/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	:= smdkc100.o
+COBJS-$(CONFIG_SAMSUNG_ONENAND)	+= onenand.o
+SOBJS	:= lowlevel_init.o
+
+SRCS    := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(SOBJS) $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/samsung/smdkc100/config.mk b/board/samsung/smdkc100/config.mk
new file mode 100644
index 0000000..ebab420
--- /dev/null
+++ b/board/samsung/smdkc100/config.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2008 # Samsung Elecgtronics
+# Kyungmin Park <kyungmin.park@samsung.com>
+#
+
+# On S5PC100 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x38000000 to 0x40000000 (128MiB)
+#
+# On S5PC110 we use the 128 MiB OneDRAM bank at
+#
+# 0x30000000 to 0x35000000 (80MiB)
+# 0x40000000 to 0x48000000 (128MiB)
+#
+TEXT_BASE = 0x34800000
diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S
new file mode 100644
index 0000000..32572c5
--- /dev/null
+++ b/board/samsung/smdkc100/lowlevel_init.S
@@ -0,0 +1,215 @@
+/*
+ * Copyright (C) 2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ */
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	r9, lr
+
+	/* r5 has always zero */
+	mov	r5, #0
+
+	ldr	r8, =S5PC100_GPIO_BASE
+
+	/* Disable Watchdog */
+	ldr	r0, =S5PC100_WATCHDOG_BASE		@0xEA200000
+	orr	r0, r0, #0x0
+	str	r5, [r0]
+
+#ifndef CONFIG_ONENAND_IPL
+	/* setting SRAM */
+	ldr	r0, =S5PC100_SROMC_BASE
+	ldr	r1, =0x9
+	str	r1, [r0]
+#endif
+
+	/* S5PC100 has 3 groups of interrupt sources */
+	ldr	r0, =S5PC100_VIC0_BASE			@0xE4000000
+	ldr	r1, =S5PC100_VIC1_BASE			@0xE4000000
+	ldr	r2, =S5PC100_VIC2_BASE			@0xE4000000
+
+	/* Disable all interrupts (VIC0, VIC1 and VIC2) */
+	mvn	r3, #0x0
+	str	r3, [r0, #0x14]				@INTENCLEAR
+	str	r3, [r1, #0x14]				@INTENCLEAR
+	str	r3, [r2, #0x14]				@INTENCLEAR
+
+#ifndef CONFIG_ONENAND_IPL
+	/* Set all interrupts as IRQ */
+	str	r5, [r0, #0xc]				@INTSELECT
+	str	r5, [r1, #0xc]				@INTSELECT
+	str	r5, [r2, #0xc]				@INTSELECT
+
+	/* Pending Interrupt Clear */
+	str	r5, [r0, #0xf00]			@INTADDRESS
+	str	r5, [r1, #0xf00]			@INTADDRESS
+	str	r5, [r2, #0xf00]			@INTADDRESS
+#endif
+
+#ifndef CONFIG_ONENAND_IPL
+	/* for UART */
+	bl uart_asm_init
+
+	/* for TZPC */
+	bl tzpc_asm_init
+#endif
+
+#ifdef CONFIG_ONENAND_IPL
+	/* init system clock */
+	bl	system_clock_init
+
+	bl	mem_ctrl_asm_init
+
+	/* Wakeup support. Don't know if it's going to be used, untested. */
+	ldr	r0, =S5PC100_RST_STAT
+	ldr	r1, [r0]
+	bic	r1, r1, #0xfffffff7
+	cmp	r1, #0x8
+	beq	wakeup_reset
+#endif
+
+1:
+	mov	lr, r9
+	mov	pc, lr
+
+#ifdef CONFIG_ONENAND_IPL
+wakeup_reset:
+
+	/* Clear wakeup status register */
+	ldr	r0, =S5PC100_WAKEUP_STAT
+	ldr	r1, [r0]
+	str	r1, [r0]
+
+	/* Load return address and jump to kernel */
+	ldr	r0, =S5PC100_INFORM0
+
+	/* r1 = physical address of s5pc100_cpu_resume function */
+	ldr	r1, [r0]
+
+	/* Jump to kernel (sleep.S) */
+	mov	pc, r1
+	nop
+	nop
+#endif
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+	ldr	r8, =S5PC1XX_CLOCK_BASE		@ 0xE0100000
+
+	/* Set Clock divider */
+	ldr	r1, =0x00011110
+	str	r1, [r8, #0x304]
+	ldr	r1, =0x1
+	str	r1, [r8, #0x308]
+	ldr	r1, =0x00011301
+	str	r1, [r8, #0x300]
+
+	/* Set Lock Time */
+	ldr	r1, =0xe10			@ Locktime : 0xe10 = 3600
+	str	r1, [r8, #0x000]		@ APLL_LOCK
+	str	r1, [r8, #0x004]		@ MPLL_LOCK
+	str	r1, [r8, #0x008]		@ EPLL_LOCK
+	str	r1, [r8, #0x00C]		@ HPLL_LOCK
+
+	/* APLL_CON */
+	ldr	r1, =0x81bc0400		@ SDIV 0, PDIV 4, MDIV 444 (1332MHz)
+	str	r1, [r8, #0x100]
+	/* MPLL_CON */
+	ldr	r1, =0x80590201		@ SDIV 1, PDIV 2, MDIV 89 (267MHz)
+	str	r1, [r8, #0x104]
+	/* EPLL_CON */
+	ldr	r1, =0x80870303		@ SDIV 3, PDIV 3, MDIV 135 (67.5MHz)
+	str	r1, [r8, #0x108]
+	/* HPLL_CON */
+	ldr	r1, =0x80600603
+	str	r1, [r8, #0x10C]
+
+	/* Set Source Clock */
+	ldr	r1, =0x1111			@ A, M, E, HPLL Muxing
+	str	r1, [r8, #0x200]		@ CLK_SRC0
+
+	ldr	r1, =0x1000001			@ Uart Clock & CLK48M Muxing
+	str	r1, [r8, #0x204]		@ CLK_SRC1
+
+	ldr	r1, =0x9000			@ ARMCLK/4
+	str	r1, [r8, #0x400]		@ CLK_OUT
+
+	/* wait at least 200us to stablize all clock */
+	mov	r2, #0x10000
+1:	subs	r2, r2, #1
+	bne	1b
+
+	mov	pc, lr
+
+#ifndef CONFIG_ONENAND_IPL
+/*
+ * uart_asm_init: Initialize UART's pins
+ */
+uart_asm_init:
+	mov	r0, r8
+	ldr	r1, =0x22222222
+	str	r1, [r0, #0x0]			@ GPA0_CON
+	ldr	r1, =0x00022222
+	str	r1, [r0, #0x20]			@ GPA1_CON
+
+	mov	pc, lr
+
+/*
+ * tzpc_asm_init: Initialize TZPC
+ */
+tzpc_asm_init:
+	ldr	r0, =0xE3800000
+	mov	r1, #0x0
+	str	r1, [r0]
+	mov	r1, #0xff
+	str	r1, [r0, #0x804]
+	str	r1, [r0, #0x810]
+
+	ldr	r0, =0xE2800000
+	str	r1, [r0, #0x804]
+	str	r1, [r0, #0x810]
+	str	r1, [r0, #0x81C]
+
+	ldr	r0, =0xE2900000
+	str	r1, [r0, #0x804]
+	str	r1, [r0, #0x810]
+
+	mov	pc, lr
+#endif
diff --git a/board/samsung/smdkc100/mem_setup.S b/board/samsung/smdkc100/mem_setup.S
new file mode 100644
index 0000000..94a701d
--- /dev/null
+++ b/board/samsung/smdkc100/mem_setup.S
@@ -0,0 +1,197 @@
+/*
+ * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx
+ *
+ * Copyright (C) 2009 Samsung Electrnoics
+ * Inki Dae <inki.dae@samsung.com>
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Minkyu Kang <mk7.kang@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+	.globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+	ldr	r6, =S5PC100_DMC_BASE			@ 0xE6000000
+
+	/* DLL parameter setting */
+	ldr	r1, =0x50101000
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+	ldr	r1, =0xf4
+	str	r1, [r6, #0x01C]			@ PHYCONTROL1
+	ldr	r1, =0x0
+	str	r1, [r6, #0x020]			@ PHYCONTROL2
+
+	/* DLL on */
+	ldr	r1, =0x50101002
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* DLL start */
+	ldr	r1, =0x50101003
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* Force value locking for DLL off */
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* DLL off */
+	ldr	r1, =0x50101001
+	str	r1, [r6, #0x018]			@ PHYCONTROL0
+
+	/* auto refresh off */
+	ldr	r1, =0xff001010
+	str	r1, [r6, #0x000]			@ CONCONTROL
+
+	/*
+	 * Burst Length 4, 2 chips, 32-bit, LPDDR
+	 * OFF: dynamic self refresh, force precharge, dynamic power down off
+	 */
+	ldr	r1, =0x00212100
+	str	r1, [r6, #0x004]			@ MEMCONTROL
+
+	/*
+	 * Note:
+	 * If Bank0 has OneDRAM we place it at 0x2800'0000
+	 * So finally Bank1 should address start at at 0x2000'0000
+	 */
+	mov	r4, #0x0
+
+swap_memory:
+	/*
+	 * Bank0
+	 * 0x30 -> 0x30000000
+	 * 0xf8 -> 0x37FFFFFF
+	 * [15:12] 0: Linear
+	 * [11:8 ] 2: 9 bits
+	 * [ 7:4 ] 2: 14 bits
+	 * [ 3:0 ] 2: 4 banks
+	 */
+	ldr	r1, =0x30f80222
+	/* if r4 is 1, swap the bank */
+	cmp	r4, #0x1
+	orreq	r1, r1, #0x08000000
+	str	r1, [r6, #0x008]			@ MEMCONFIG0
+
+	/*
+	 * Bank1
+	 * 0x38 -> 0x38000000
+	 * 0xf8 -> 0x3fFFFFFF
+	 * [15:12] 0: Linear
+	 * [11:8 ] 2: 9 bits
+	 * [ 7:4 ] 2: 14 bits
+	 * [ 3:0 ] 2: 4 banks
+	 */
+	ldr	r1, =0x38f80222
+	/* if r4 is 1, swap the bank */
+	cmp	r4, #0x1
+	biceq	r1, r1, #0x08000000
+	str	r1, [r6, #0x00c]			@ MEMCONFIG1
+
+	ldr	r1, =0x20000000
+	str	r1, [r6, #0x014]			@ PRECHCONFIG
+
+	/*
+	 * FIXME: Please verify these values
+	 * 7.8us * 166MHz %LE %LONG1294(0x50E)
+	 * 7.8us * 133MHz %LE %LONG1038(0x40E),
+	 * 7.8us * 100MHz %LE %LONG780(0x30C),
+	 * 7.8us * 20MHz  %LE %LONG156(0x9C),
+	 * 7.8us * 10MHz  %LE %LONG78(0x4E)
+	 */
+	ldr	r1, =0x0000050e
+	str	r1, [r6, #0x030]			@ TIMINGAREF
+
+	/* 166 MHz */
+	ldr	r1, =0x0c233287
+	str	r1, [r6, #0x034]			@ TIMINGROW
+
+	/* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */
+	ldr	r1, =0x32330303
+	str	r1, [r6, #0x038]			@ TIMINGDATA
+
+	/* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */
+	ldr	r1, =0x04141433
+	str	r1, [r6, #0x03C]			@ TIMINGPOWER
+
+	/* chip0 Deselect */
+	ldr	r1, =0x07000000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip0 PALL */
+	ldr	r1, =0x01000000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip0 REFA */
+	ldr	r1, =0x05000000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+	/* chip0 REFA */
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */
+	ldr	r1, =0x00000032
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 Deselect */
+	ldr	r1, =0x07100000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 PALL */
+	ldr	r1, =0x01100000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 REFA */
+	ldr	r1, =0x05100000
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+	/* chip1 REFA */
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */
+	ldr	r1, =0x00100032
+	str	r1, [r6, #0x010]			@ DIRECTCMD
+
+	/* auto refresh on */
+	ldr	r1, =0xff002030
+	str	r1, [r6, #0x000]			@ CONCONTROL
+
+	/* PwrdnConfig */
+	ldr	r1, =0x00100002
+	str	r1, [r6, #0x028]			@ PWRDNCONFIG
+
+	/* BL%LE %LONG */
+	ldr	r1, =0xff212100
+	str	r1, [r6, #0x004]			@ MEMCONTROL
+
+
+	/* Try to test memory area */
+	cmp	r4, #0x1
+	beq	1f
+
+	mov	r4, #0x1
+	ldr	r1, =0x37ffff00
+	str	r4, [r1]
+	str	r4, [r1, #0x4]				@ dummy write
+	ldr	r0, [r1]
+	cmp	r0, r4
+	bne	swap_memory
+
+1:
+	mov	pc, lr
+
+	.ltorg
diff --git a/board/samsung/smdkc100/onenand.c b/board/samsung/smdkc100/onenand.c
new file mode 100644
index 0000000..c25869e
--- /dev/null
+++ b/board/samsung/smdkc100/onenand.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2008-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/mtd/compat.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+#include <linux/mtd/samsung_onenand.h>
+
+#include <onenand_uboot.h>
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+
+void onenand_board_init(struct mtd_info *mtd)
+{
+	struct onenand_chip *this = mtd->priv;
+	struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE;
+	struct samsung_onenand *onenand;
+	int value;
+
+	this->base = (void *)S5PC100_ONENAND_BASE;
+	onenand = (struct samsung_onenand *)this->base;
+
+	/* D0 Domain memory clock gating */
+	value = readl(&clk->gate_d01);
+	value &= ~(1 << 2);		/* CLK_ONENANDC */
+	value |= (1 << 2);
+	writel(value, &clk->gate_d01);
+
+	value = readl(&clk->src0);
+	value &= ~(1 << 24);		/* MUX_1nand: 0 from HCLKD0 */
+	value &= ~(1 << 20);		/* MUX_HREF: 0 from FIN_27M */
+	writel(value, &clk->src0);
+
+	value = readl(&clk->div1);
+	value &= ~(3 << 16);		/* PCLKD1_RATIO */
+	value |= (1 << 16);
+	writel(value, &clk->div1);
+
+	writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset);
+
+	while (!(readl(&onenand->int_err_stat) & RST_CMP))
+		continue;
+
+	writel(RST_CMP, &onenand->int_err_ack);
+
+	/*
+	 * Access_Clock [2:0]
+	 * 166 MHz, 134 Mhz : 3
+	 * 100 Mhz, 60 Mhz  : 2
+	 */
+	writel(0x3, &onenand->acc_clock);
+
+	writel(INT_ERR_ALL, &onenand->int_err_mask);
+	writel(1 << 0, &onenand->int_pin_en);	/* Enable */
+
+	value = readl(&onenand->int_err_mask);
+	value &= ~RDY_ACT;
+	writel(value, &onenand->int_err_mask);
+
+	s3c_onenand_init(mtd);
+}
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
new file mode 100644
index 0000000..15a1a27
--- /dev/null
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -0,0 +1,51 @@
+/*
+ *  Copyright (C) 2008-2009 Samsung Electronics
+ *  Minkyu Kang <mk7.kang@samsung.com>
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	gd->bd->bi_arch_number = MACH_TYPE_SMDKC100;
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+						PHYS_SDRAM_1_SIZE);
+
+	return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+	printf("Board:\tSMDKC100\n");
+	return 0;
+}
+#endif
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
index 6276850..7452c1f 100644
--- a/board/sbc2410x/sbc2410x.c
+++ b/board/sbc2410x/sbc2410x.c
@@ -75,8 +75,9 @@ static inline void delay (unsigned long loops)
 
 int board_init (void)
 {
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
 	clk_power->LOCKTIME = 0xFFFFFF;
@@ -170,7 +171,7 @@ static inline void NF_Init(void)
 
 void nand_init(void)
 {
-	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+	struct s3c2410_nand * const nand = s3c2410_get_base_nand();
 
 	NF_Init();
 #ifdef DEBUG
diff --git a/board/ti/sdp3430/Makefile b/board/ti/sdp3430/Makefile
new file mode 100644
index 0000000..2554c7b
--- /dev/null
+++ b/board/ti/sdp3430/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= sdp.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/sdp3430/config.mk b/board/ti/sdp3430/config.mk
new file mode 100644
index 0000000..18e4761
--- /dev/null
+++ b/board/ti/sdp3430/config.mk
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2006-2009
+# Texas Instruments Incorporated, <www.ti.com>
+#
+# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Physical Address:
+# 8000'0000 (bank0)
+# A000/0000 (bank1)
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+
+# For use with external or internal boots.
+TEXT_BASE = 0x80e80000
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
new file mode 100644
index 0000000..40cf26f
--- /dev/null
+++ b/board/ti/sdp3430/sdp.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "sdp.h"
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"OMAP3 SDP3430 board",
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+	"OneNAND",
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+	"NAND",
+#else
+	"NOR",
+#endif
+};
+
+/* Timing definitions for GPMC controller for Sibley NOR */
+static const u32 gpmc_sdp_nor[] = {
+    SDP3430_NOR_GPMC_CONF1,
+    SDP3430_NOR_GPMC_CONF2,
+    SDP3430_NOR_GPMC_CONF3,
+    SDP3430_NOR_GPMC_CONF4,
+    SDP3430_NOR_GPMC_CONF5,
+    SDP3430_NOR_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/*
+ * Timing definitions for GPMC controller for Debug Board
+ * Debug board contains access to ethernet and DIP Switch setting
+ * information etc.
+ */
+static const u32 gpmc_sdp_debug[] = {
+    SDP3430_DEBUG_GPMC_CONF1,
+    SDP3430_DEBUG_GPMC_CONF2,
+    SDP3430_DEBUG_GPMC_CONF3,
+    SDP3430_DEBUG_GPMC_CONF4,
+    SDP3430_DEBUG_GPMC_CONF5,
+    SDP3430_DEBUG_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/* Timing defintions for GPMC OneNAND */
+static const u32 gpmc_sdp_onenand[] = {
+    SDP3430_ONENAND_GPMC_CONF1,
+    SDP3430_ONENAND_GPMC_CONF2,
+    SDP3430_ONENAND_GPMC_CONF3,
+    SDP3430_ONENAND_GPMC_CONF4,
+    SDP3430_ONENAND_GPMC_CONF5,
+    SDP3430_ONENAND_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/* GPMC definitions for GPMC NAND */
+static const u32 gpmc_sdp_nand[] = {
+    SDP3430_NAND_GPMC_CONF1,
+    SDP3430_NAND_GPMC_CONF2,
+    SDP3430_NAND_GPMC_CONF3,
+    SDP3430_NAND_GPMC_CONF4,
+    SDP3430_NAND_GPMC_CONF5,
+    SDP3430_NAND_GPMC_CONF6,
+    /*CONF7- computed as params */
+};
+
+/* gpmc_cfg is initialized by gpmc_init and we use it here */
+extern struct gpmc *gpmc_cfg;
+
+/**
+ * @brief board_init - gpmc and basic setup as phase1 of boot sequence
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* TODO: Dynamically pop out CS mapping and program accordingly */
+	/* Configure devices for default ON ON ON settings */
+	enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0],
+			CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M);
+	enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000,
+			GPMC_SIZE_16M);
+	enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000,
+			GPMC_SIZE_16M);
+	enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE,
+			GPMC_SIZE_16M);
+	/* board id for Linux */
+	gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP;
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+#define LAN_RESET_REGISTER	(CONFIG_LAN91C96_BASE + 0x01c)
+#define ETH_CONTROL_REG		(CONFIG_LAN91C96_BASE + 0x30b)
+
+/**
+ * @brief ether_init Take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ */
+static void ether_init(void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+	int cnt = 20;
+
+	writew(0x0, LAN_RESET_REGISTER);
+	do {
+		writew(0x1, LAN_RESET_REGISTER);
+		udelay(100);
+		if (cnt == 0)
+			goto reset_err_out;
+		--cnt;
+	} while (readw(LAN_RESET_REGISTER) != 0x1);
+
+	cnt = 20;
+
+	do {
+		writew(0x0, LAN_RESET_REGISTER);
+		udelay(100);
+		if (cnt == 0)
+			goto reset_err_out;
+		--cnt;
+	} while (readw(LAN_RESET_REGISTER) != 0x0000);
+	udelay(1000);
+
+	writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
+	udelay(1000);
+reset_err_out:
+	return;
+
+#endif
+}
+
+/**
+ * @brief misc_init_r - Configure SDP board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+	/* Partial setup:
+	 *   VAUX3 - 2.8V for DVI
+	 *   VPLL1 - 1.8V
+	 *   VDAC  - 1.8V
+	 * and turns on LEDA/LEDB (not needed ... NOP?)
+	 */
+	twl4030_power_init();
+
+	/* FIXME finish setup:
+	 *   VAUX1 - 2.8V for mainboard I/O
+	 *   VAUX2 - 2.8V for camera
+	 *   VAUX4 - 1.8V for OMAP3 CSI
+	 *   VMMC1 - 3.15V (init, variable) for MMC1
+	 *   VMMC2 - 1.85V for MMC2
+	 *   VSIM  - off (init, variable) for MMC1.DAT[3..7], SIM
+	 *   VPLL2 - 1.8V
+	 */
+	ether_init();
+
+	return 0;
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the hardware. Many pins need to be moved from protect
+ * to primary mode.
+ */
+void set_muxconf_regs(void)
+{
+	/* platform specific muxes */
+	MUX_SDP3430();
+}
diff --git a/board/ti/sdp3430/sdp.h b/board/ti/sdp3430/sdp.h
new file mode 100644
index 0000000..3526e94
--- /dev/null
+++ b/board/ti/sdp3430/sdp.h
@@ -0,0 +1,417 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _BOARD_SDP_H_
+#define _BOARD_SDP_H_
+
+#define OFF_IN_PD	0
+#define OFF_OUT_PD	0
+
+/*
+ * IEN	- Input Enable
+ * IDIS	- Input Disable
+ * PTD	- Pull type Down
+ * PTU	- Pull type Up
+ * DIS	- Pull type selection is inactive
+ * EN	- Pull type selection is active
+ * M0	- Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_SDP3430()\
+	/*SDRC*/\
+	MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))\
+	/*GPMC*/\
+	MUX_VAL(CP(GPMC_A1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_A10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D12), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D13), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D14), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_D15), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NCS0), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS1), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS3), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_NCS4), (OFF_IN_PD | IEN | PTU | EN | M4)) /*G55-F_DIS*/\
+	MUX_VAL(CP(GPMC_NCS5), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G56T_EN*/\
+	MUX_VAL(CP(GPMC_NCS6), (OFF_IN_PD | IEN | PTD | DIS | M4))/*G57-AGPSP*/\
+	MUX_VAL(CP(GPMC_NCS7), (OFF_IN_PD | IEN | PTU | EN | M4))/*G58-WLNIQ*/\
+	MUX_VAL(CP(GPMC_CLK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NADV_ALE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NOE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NWE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NBE0_CLE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_NBE1), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*G61-BTST*/\
+	MUX_VAL(CP(GPMC_NWP), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(GPMC_WAIT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_WAIT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(GPMC_WAIT2), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_64*/\
+	MUX_VAL(CP(GPMC_WAIT3), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_65*/\
+	/*DSS*/\
+	MUX_VAL(CP(DSS_PCLK), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_HSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_VSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_ACBIAS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA0), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA11), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA12), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA13), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA14), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA15), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA16), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA17), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA18), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA19), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA20), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA21), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA22), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA23), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	/*CAMERA*/\
+	MUX_VAL(CP(CAM_HS), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(CAM_VS), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(CAM_XCLKA), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_PCLK), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(CAM_FLD), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G98-C_RST*/\
+	MUX_VAL(CP(CAM_D0), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D0 */\
+	MUX_VAL(CP(CAM_D1), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D1 */\
+	MUX_VAL(CP(CAM_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_XCLKB), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(CAM_WEN), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DX0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DY0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DX1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(CSI2_DY1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Audio InterfACe */\
+	MUX_VAL(CP(MCBSP2_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP2_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP2_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP2_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	/*Expansion Card */\
+	MUX_VAL(CP(MMC1_CLK), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT4), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT5), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT6), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC1_DAT7), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	/*Wireless LAN */\
+	MUX_VAL(CP(MMC2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MMC2_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MMC2_DAT4), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD0*/\
+	MUX_VAL(CP(MMC2_DAT5), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD1*/\
+	MUX_VAL(CP(MMC2_DAT6), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DCMD*/\
+	MUX_VAL(CP(MMC2_DAT7), (OFF_IN_PD | IEN | PTU | EN | M1))/*CLKIN*/\
+	/*Bluetooth*/\
+	MUX_VAL(CP(MCBSP3_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP3_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP3_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP3_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(UART2_CTS), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(UART2_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART2_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART2_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Modem Interface */\
+	MUX_VAL(CP(UART1_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART1_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART1_CTS), (OFF_IN_PD | IEN | PTU | DIS | M0))\
+	MUX_VAL(CP(UART1_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP4_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1DRX*/\
+	MUX_VAL(CP(MCBSP4_DR), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1FLGRX*/\
+	MUX_VAL(CP(MCBSP4_DX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1RDYRX*/\
+	MUX_VAL(CP(MCBSP4_FSX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1WAKE*/\
+	MUX_VAL(CP(MCBSP1_CLKR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_FSR), (OFF_OUT_PD | IDIS | PTU | EN | M4))/*G157BWP*/\
+	MUX_VAL(CP(MCBSP1_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP_CLKS), (OFF_IN_PD | IEN | PTU | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCBSP1_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Serial Interface*/\
+	MUX_VAL(CP(UART3_CTS_RCTX), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(UART3_RTS_SD), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(UART3_RX_IRRX), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(UART3_TX_IRTX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_STP), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(HSUSB0_DIR), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_NXT), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA3), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA4), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA5), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA6), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(HSUSB0_DATA7), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/* NOTE db: removed off-mode from I2C 1/2/3 ... external pullups!! */\
+	MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0))\
+	MUX_VAL(CP(HDQ_SIO), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(MCSPI1_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI1_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI1_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI1_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI1_CS1), (OFF_OUT_PD | IDIS | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI1_CS2), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G176*/\
+	MUX_VAL(CP(MCSPI1_CS3), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI2_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI2_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(MCSPI2_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(MCSPI2_CS1), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	/*Control and debug */\
+	MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_NIRQ), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(SYS_BOOT0), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G2PENIRQ*/\
+	MUX_VAL(CP(SYS_BOOT1), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G4MMC1WP*/\
+	MUX_VAL(CP(SYS_BOOT3), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G5LCDENV*/\
+	MUX_VAL(CP(SYS_BOOT4), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G6LANINT*/\
+	MUX_VAL(CP(SYS_BOOT5), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G7MMC2WP*/\
+	MUX_VAL(CP(SYS_BOOT6), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G8ENBKL*/\
+	MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SYS_CLKOUT2), (OFF_IN_PD | IEN | PTU | EN | M4))/*GPIO_186*/\
+	MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_EMU0), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(JTAG_EMU1), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_CLK_ES2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(ETK_CTL_ES2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D0_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD0*/\
+	MUX_VAL(CP(ETK_D1_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SPI3_CS0*/\
+	MUX_VAL(CP(ETK_D2_ES2), (OFF_IN_PD | IEN | PTD | EN | M1))/*USB1TLD2*/\
+	MUX_VAL(CP(ETK_D3_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD7*/\
+	MUX_VAL(CP(ETK_D4_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D5_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D6_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D7_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D8_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D9_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D10_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D11_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D12_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D13_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D14_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(ETK_D15_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	/*Die to Die */\
+	MUX_VAL(CP(D2D_MCAD0), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD1), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD2), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD3), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD4), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD5), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD6), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD7), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD8), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD9), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD10), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD11), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD12), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD13), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD14), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD15), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD16), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD17), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD18), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD19), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD20), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD21), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD22), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD23), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD24), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD25), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD26), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD27), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD28), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD29), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD30), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD31), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD32), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD33), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD34), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD35), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_MCAD36), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_CLK26MI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_NRESPWRON), (OFF_OUT_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_NRESWARM), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(D2D_ARM9NIRQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_UMA2P6FIQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SPINT), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_FRINT), (OFF_IN_PD | IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_DMAREQ0), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_DMAREQ1), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_DMAREQ2), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_DMAREQ3), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTRST), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTDI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTDO), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTMS), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GTCK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_N3GRTCK), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_MSTDBY), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))\
+	MUX_VAL(CP(D2D_IDLEREQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_IDLEACK), (OFF_IN_PD | IEN | PTU | EN | M0))\
+	MUX_VAL(CP(D2D_MWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_MREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_MBUSFLAG), (OFF_IN_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(D2D_SBUSFLAG), (OFF_OUT_PD | IEN | PTD | DIS | M0))\
+	MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))\
+	MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*SDRC_CKE1 NOT USED*/
+
+/*
+ * GPMC Timing definitions for SDP3430
+ * at L3 = 166Mhz
+ */
+
+/* Timing definitions for GPMC controller for Sibley NOR */
+#define SDP3430_NOR_GPMC_CONF1 0x00001200
+#define SDP3430_NOR_GPMC_CONF2 0x001F1F00
+#define SDP3430_NOR_GPMC_CONF3 0x00080802
+#define SDP3430_NOR_GPMC_CONF4 0x1C091C09
+#define SDP3430_NOR_GPMC_CONF5 0x01131F1F
+#define SDP3430_NOR_GPMC_CONF6 0x1F0F03C2
+
+/*
+ * Timing definitions for GPMC controller for Debug Board
+ * Debug board contains access to ethernet and DIP Switch setting
+ * information etc.
+ */
+#define SDP3430_DEBUG_GPMC_CONF1 0x00611200
+#define SDP3430_DEBUG_GPMC_CONF2 0x001F1F01
+#define SDP3430_DEBUG_GPMC_CONF3 0x00080803
+#define SDP3430_DEBUG_GPMC_CONF4 0x1D091D09
+#define SDP3430_DEBUG_GPMC_CONF5 0x041D1F1F
+#define SDP3430_DEBUG_GPMC_CONF6 0x1D0904C4
+
+/* Timing defintions for GPMC OneNAND */
+#define SDP3430_ONENAND_GPMC_CONF1 0x00001200
+#define SDP3430_ONENAND_GPMC_CONF2 0x000F0F01
+#define SDP3430_ONENAND_GPMC_CONF3 0x00030301
+#define SDP3430_ONENAND_GPMC_CONF4 0x0F040F04
+#define SDP3430_ONENAND_GPMC_CONF5 0x010F1010
+#define SDP3430_ONENAND_GPMC_CONF6 0x1F060000
+
+/* GPMC definitions for GPMC NAND */
+#define SDP3430_NAND_GPMC_CONF1 0x00000800
+#define SDP3430_NAND_GPMC_CONF2 0x00141400
+#define SDP3430_NAND_GPMC_CONF3 0x00141400
+#define SDP3430_NAND_GPMC_CONF4 0x0F010F01
+#define SDP3430_NAND_GPMC_CONF5 0x010C1414
+#define SDP3430_NAND_GPMC_CONF6 0x1F040A80
+
+#endif /* _BOARD_SDP_H_ */
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index ae6f7c6..04a3607 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -644,9 +644,9 @@ static int adc_read (unsigned int channel)
 {
 	int j = 1000; /* timeout value for wait loop in us */
 	int result;
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 	channel &= 0x7;
 
 	adc_init ();
@@ -686,9 +686,9 @@ static int adc_read (unsigned int channel)
 
 static void adc_init (void)
 {
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 
 	padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
 	padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
@@ -707,7 +707,7 @@ static void adc_init (void)
 
 static void led_set (unsigned int state)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	led_init ();
 
@@ -740,7 +740,7 @@ static void led_blink (void)
 
 static void led_init (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure GPA12 as output and set to High -> LED off */
 	gpio->PACON &= ~(1 << 12);
diff --git a/board/trab/rs485.c b/board/trab/rs485.c
index 97aea91..7d5c0a2 100644
--- a/board/trab/rs485.c
+++ b/board/trab/rs485.c
@@ -42,7 +42,7 @@ static void trab_rs485_disable_rx(void);
 
 static void rs485_setbrg (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 	int i;
 	unsigned int reg = 0;
 
@@ -67,7 +67,7 @@ static void rs485_setbrg (void)
 
 static void rs485_cfgio (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PFCON &= ~(0x3 << 2);
 	gpio->PFCON |=  (0x2 << 2); /* configure GPF1 as RXD1 */
@@ -101,7 +101,7 @@ int rs485_init (void)
  */
 int rs485_getc (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	/* wait for character to arrive */
 	while (!(uart->UTRSTAT & 0x1));
@@ -114,7 +114,7 @@ int rs485_getc (void)
  */
 void rs485_putc (const char c)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	/* wait for room in the tx FIFO */
 	while (!(uart->UTRSTAT & 0x2));
@@ -131,7 +131,7 @@ void rs485_putc (const char c)
  */
 int rs485_tstc (void)
 {
-	S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
+	struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
 
 	return uart->UTRSTAT & 0x1;
 }
@@ -168,7 +168,7 @@ static void set_rs485re(unsigned char rs485re_state)
 
 static void set_rs485de(unsigned char rs485de_state)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* This is on PORT A bit 11 */
 	if(rs485de_state)
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 2dccd87..ea782a9 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -69,8 +69,9 @@ int board_init ()
 #if defined(CONFIG_VFD)
 	extern int vfd_init_clocks(void);
 #endif
-	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_clock_power * const clk_power =
+					s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* memory and cpu-speed are setup before relocation */
 #ifdef CONFIG_TRAB_50MHZ
@@ -338,22 +339,22 @@ static int key_pressed(void)
 
 static inline void SET_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT &= 0x5FF;
 }
 
 static inline void CLR_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT |= 0x200;
 }
 
 static void spi_init(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	int i;
 
 	/* Configure I/O ports. */
@@ -377,7 +378,7 @@ static void spi_init(void)
 
 static void wait_transmit_done(void)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
 	while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
 }
@@ -385,7 +386,7 @@ static void wait_transmit_done(void)
 static void tsc2000_write(unsigned int page, unsigned int reg,
 						  unsigned int data)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	unsigned int command;
 
 	SET_CS_TOUCH();
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 74cdbfc..dc2a8d7 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -406,9 +406,9 @@ static int adc_read (unsigned int channel)
 {
 	int j = 1000; /* timeout value for wait loop in us */
 	int result;
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 	channel &= 0x7;
 
 	padc->ADCCON &= ~ADC_STDBM; /* select normal mode */
@@ -446,9 +446,9 @@ static int adc_read (unsigned int channel)
 
 static void adc_init (void)
 {
-	S3C2400_ADC *padc;
+	struct s3c2400_adc *padc;
 
-	padc = S3C2400_GetBase_ADC();
+	padc = s3c2400_get_base_adc();
 
 	padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
 	padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
@@ -490,7 +490,7 @@ int do_power_switch (void)
 {
 	int result;
 
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure GPE7 as input */
 	gpio->PECON &= ~(0x3 << (2 * 7));
@@ -557,7 +557,7 @@ int do_vfd_id (void)
 	int i;
 	long int pcup_old, pccon_old;
 	int vfd_board_id;
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* try to red vfd board id from the value defined by pull-ups */
 
@@ -589,8 +589,8 @@ int do_buzzer (char **argv)
 {
 	int counter;
 
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* set prescaler for timer 2, 3 and 4 */
 	timers->TCFG0 &= ~0xFF00;
@@ -637,7 +637,7 @@ int do_buzzer (char **argv)
 
 int do_led (char **argv)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure PC14 and PC15 as output */
 	gpio->PCCON &= ~(0xF << 28);
@@ -692,7 +692,7 @@ int do_led (char **argv)
 
 int do_full_bridge (char **argv)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* configure PD5 and PD6 as output */
 	gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2));
@@ -801,7 +801,7 @@ int do_motor_contact (void)
 
 int do_motor (char **argv)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	/* Configure I/O port */
 	gpio->PGCON &= ~(0x3 << 0);
@@ -827,8 +827,8 @@ static void print_identifier (void)
 int do_pwm (char **argv)
 {
 	int counter;
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
 
 	if (strcmp (argv[2], "on") == 0) {
 		/* configure pin GPD8 as TOUT3 */
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index 986b6fb..fc501a8 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -27,6 +27,7 @@
 
 #include <common.h>
 #include <s3c2400.h>
+#include <asm/io.h>
 #include <div64.h>
 #include "tsc2000.h"
 
@@ -44,8 +45,8 @@
 
 void tsc2000_spi_init(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	int i;
 
 	/* Configure I/O ports. */
@@ -71,7 +72,7 @@ void tsc2000_spi_init(void)
 
 void spi_wait_transmit_done(void)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
 	while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
 }
@@ -79,7 +80,7 @@ void spi_wait_transmit_done(void)
 
 void tsc2000_write(unsigned short reg, unsigned short data)
 {
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 	unsigned int command;
 
 	SET_CS_TOUCH();
@@ -100,7 +101,7 @@ void tsc2000_write(unsigned short reg, unsigned short data)
 unsigned short tsc2000_read (unsigned short reg)
 {
 	unsigned short command, data;
-	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+	struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
 
 	SET_CS_TOUCH();
 	command = 0x8000 | reg;
@@ -123,7 +124,7 @@ unsigned short tsc2000_read (unsigned short reg)
 
 void tsc2000_set_mux (unsigned int channel)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	CLR_MUX1_ENABLE; CLR_MUX2_ENABLE;
 	CLR_MUX3_ENABLE; CLR_MUX4_ENABLE;
@@ -200,7 +201,7 @@ void tsc2000_set_mux (unsigned int channel)
 
 void tsc2000_set_range (unsigned int range)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	switch (range) {
 	case 1:
@@ -306,7 +307,7 @@ s32 tsc2000_contact_temp (void)
 
 void tsc2000_reg_init (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	tsc2000_write(TSC2000_REG_ADC, 0x2036);
 	tsc2000_write(TSC2000_REG_REF, 0x0011);
diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h
index 50c09c2..0b6253f 100644
--- a/board/trab/tsc2000.h
+++ b/board/trab/tsc2000.h
@@ -128,7 +128,7 @@ void adc_wait_conversion_done(void);
 
 static inline void SET_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT &= 0x5FF;
 }
@@ -136,7 +136,7 @@ static inline void SET_CS_TOUCH(void)
 
 static inline void CLR_CS_TOUCH(void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	gpio->PDDAT |= 0x200;
 }
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index e5ca4ab..d5ad5bb 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -358,9 +358,9 @@ int vfd_init_clocks (void)
 {
 	int i;
 
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+	struct s3c24x0_timers * const timers = s3c24x0_get_base_timers();
+	struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
 
 	/* try to determine display type from the value
 	 * defined by pull-ups
@@ -429,8 +429,8 @@ int vfd_init_clocks (void)
  */
 int drv_vfd_init(void)
 {
-	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 	char *tmp;
 	ulong palette;
 	static int vfd_init_done = 0;
@@ -529,7 +529,7 @@ int drv_vfd_init(void)
  */
 void disable_vfd (void)
 {
-	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
 	VFD_DISABLE;
 	gpio->PDCON &= ~0xC;