summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorSuriyan Ramasami <suriyan.r@gmail.com>2014-11-20 17:26:30 -0800
committerMinkyu Kang <mk7.kang@samsung.com>2014-11-24 10:40:24 +0900
commitf2cca34245c119cc7fe3cf48646e31133a1bdffe (patch)
tree010ba0a938a3efff520a4b38f1a8e92d5b40ac50 /board
parentc8322be05790efbc0cee7c5fc14ee683f164dde1 (diff)
downloadu-boot-imx-f2cca34245c119cc7fe3cf48646e31133a1bdffe.zip
u-boot-imx-f2cca34245c119cc7fe3cf48646e31133a1bdffe.tar.gz
u-boot-imx-f2cca34245c119cc7fe3cf48646e31133a1bdffe.tar.bz2
odroid: usbhost - Add missing gpio_request call
The USB host code was missing gpio_request() calls before using the gpio functions, causing errors to be printed out. As a side note calls to max77686_set_buck_mode(OPMODE_OFF/OPMODE_ON) have been removed, as they did not have any effect. This is as per Przemyslaw: I looked into the documentation and there is a "ENB8" pin in PMIC package. This pin allows steering BUCK8 ON/OFF by the hardware. If ENB8 is set to low then you can do on/off. If high, then you cannot change its state by I2C write, which seems to be the case with the Odroids. Signed-off-by: Suriyan Ramasami <suriyan.r@gmail.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Diffstat (limited to 'board')
-rw-r--r--board/samsung/odroid/odroid.c13
1 files changed, 11 insertions, 2 deletions
diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c
index f7396ab..a2c008e 100644
--- a/board/samsung/odroid/odroid.c
+++ b/board/samsung/odroid/odroid.c
@@ -382,6 +382,17 @@ static void board_gpio_init(void)
gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP);
gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X);
gpio_direction_input(EXYNOS4X12_GPIO_X31);
+
+#ifdef CONFIG_CMD_USB
+ /* USB3503A Reference frequency */
+ gpio_request(EXYNOS4X12_GPIO_X30, "USB3503A RefFreq");
+
+ /* USB3503A Connect */
+ gpio_request(EXYNOS4X12_GPIO_X34, "USB3503A Connect");
+
+ /* USB3503A Reset */
+ gpio_request(EXYNOS4X12_GPIO_X35, "USB3503A Reset");
+#endif
}
static int pmic_init_max77686(void)
@@ -489,10 +500,8 @@ int board_usb_init(int index, enum usb_init_type init)
p_pmic = pmic_get("MAX77686_PMIC");
if (p_pmic && !pmic_probe(p_pmic)) {
- max77686_set_buck_mode(p_pmic, 8, OPMODE_OFF);
max77686_set_buck_voltage(p_pmic, 8, 750000);
max77686_set_buck_voltage(p_pmic, 8, 3300000);
- max77686_set_buck_mode(p_pmic, 8, OPMODE_ON);
}
#endif