summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorChris Zankel <chris@zankel.net>2016-08-10 18:36:48 +0300
committerTom Rini <trini@konsulko.com>2016-08-15 18:46:40 -0400
commit7e270ec3af02d2358f9a454ba0d0bb39f07d14b6 (patch)
tree6d60ccd942f2dccb9017550e988a446de7351781 /board
parent28b48a0710cde7270bca423cee8ed12b0c54eb01 (diff)
downloadu-boot-imx-7e270ec3af02d2358f9a454ba0d0bb39f07d14b6.zip
u-boot-imx-7e270ec3af02d2358f9a454ba0d0bb39f07d14b6.tar.gz
u-boot-imx-7e270ec3af02d2358f9a454ba0d0bb39f07d14b6.tar.bz2
xtensa: add support for the 'xtfpga' evaluation board
The 'xtfpga' board is actually a set of FPGA evaluation boards that can be configured to run an Xtensa processor. - Avnet Xilinx LX60 - Avnet Xilinx LX110 - Avnet Xilinx LX200 - Xilinx ML605 - Xilinx KC705 These boards share the same components (open-ethernet, ns16550 serial, lcd display, flash, etc.). Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board')
-rw-r--r--board/cadence/xtfpga/Kconfig39
-rw-r--r--board/cadence/xtfpga/MAINTAINERS7
-rw-r--r--board/cadence/xtfpga/Makefile7
-rw-r--r--board/cadence/xtfpga/README125
-rw-r--r--board/cadence/xtfpga/xtfpga.c115
5 files changed, 293 insertions, 0 deletions
diff --git a/board/cadence/xtfpga/Kconfig b/board/cadence/xtfpga/Kconfig
new file mode 100644
index 0000000..69296be
--- /dev/null
+++ b/board/cadence/xtfpga/Kconfig
@@ -0,0 +1,39 @@
+if TARGET_XTFPGA
+
+choice
+ prompt "XTFPGA board type select"
+
+config XTFPGA_LX60
+ bool "Support Avnet LX60"
+config XTFPGA_LX110
+ bool "Support Avnet LX110"
+config XTFPGA_LX200
+ bool "Support Avnet LX200"
+config XTFPGA_ML605
+ bool "Support Xilinx ML605"
+config XTFPGA_KC705
+ bool "Support Xilinx KC705"
+
+endchoice
+
+config SYS_BOARD
+ string
+ default "xtfpga"
+
+config SYS_VENDOR
+ string
+ default "cadence"
+
+config SYS_CONFIG_NAME
+ string
+ default "xtfpga"
+
+config BOARD_SDRAM_SIZE
+ hex
+ default 0x04000000 if XTFPGA_LX60
+ default 0x03000000 if XTFPGA_LX110
+ default 0x06000000 if XTFPGA_LX200
+ default 0x18000000 if XTFPGA_ML605
+ default 0x38000000 if XTFPGA_KC705
+
+endif
diff --git a/board/cadence/xtfpga/MAINTAINERS b/board/cadence/xtfpga/MAINTAINERS
new file mode 100644
index 0000000..f4a2b94
--- /dev/null
+++ b/board/cadence/xtfpga/MAINTAINERS
@@ -0,0 +1,7 @@
+XTFPGA BOARD
+M: Max Filippov <jcmvbkbc@gmail.com>
+S: Maintained
+F: board/cadence/xtfpga/
+F: include/configs/xtfpga.h
+F: configs/xtfpga_defconfig
+F: drivers/sysreset/sysreset_xtfpga.c
diff --git a/board/cadence/xtfpga/Makefile b/board/cadence/xtfpga/Makefile
new file mode 100644
index 0000000..fd8f720
--- /dev/null
+++ b/board/cadence/xtfpga/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2007 - 2013, Tensilica Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ${BOARD}.o
diff --git a/board/cadence/xtfpga/README b/board/cadence/xtfpga/README
new file mode 100644
index 0000000..5f29e25
--- /dev/null
+++ b/board/cadence/xtfpga/README
@@ -0,0 +1,125 @@
+ Tensilica 'xtfpga' Evaluation Boards
+ ====================================
+
+Tensilica's 'xtfpga' evaluation boards are actually a set of different
+boards that share configurations. The following is a list of supported
+hardware by this board type:
+
+- XT-AV60 / LX60
+- XT-AV110 / LX110
+- XT-AV200 / LX200
+- ML605
+- KC705
+
+All boards provide the following common configurations:
+
+- An Xtensa or Diamond processor core.
+- An on-chip-debug (OCD) JTAG interface.
+- A 16550 compatible UART and serial port.
+- An OpenCores Wishbone 10/100-base-T ethernet interface.
+- A 32 char two line LCD display. (except for the LX200)
+
+LX60/LX110/LX200:
+
+- Virtex-4 (XC4VLX60 / XCV4LX200) / Virtext-5 (XC5VLX110)
+- 128MB / 64MB (LX60) memory
+- 16MB / 4MB (LX60) Linear Flash
+
+ML605
+
+- Virtex-6 (XC6VLX240T)
+- 512MB DDR3 memory
+- 16MB Linear BPI Flash
+
+KC705 (Xilinx)
+
+- Kintex-7 XC7K325T FPGA
+- 1GB DDR3 memory
+- 128MB Linear BPI Flash
+
+
+Setting up the Board
+--------------------
+
+The serial port defaults to 115200 baud, no parity and 1 stop bit.
+A terminal emulator must be set accordingly to see the U-Boot prompt.
+
+
+Board Configurations LX60/LX110/LX200/ML605/KC705
+-------------------------------------------------
+
+The LX60/LX110/LX200/ML605 contain an 8-way DIP switch that controls
+the boot mapping and selects from a range of default ethernet MAC
+addresses.
+
+Boot Mapping (DIP switch 8):
+
+ DIP switch 8 maps the system ROM address space (in which the
+ reset vector resides) to either SRAM (off, 0, down) or Flash
+ (on, 1, up). This mapping is implemented in the FPGA bitstream
+ and cannot be disabled by software, therefore DIP switch 8 is no
+ available for application use. Note DIP switch 7 is reserved by
+ Tensilica for future possible hardware use.
+
+ Mapping to SRAM allows U-Boot to be debugged with an OCD/JTAG
+ tool such as the Xtensa OCD Daemon connected via a suppored probe.
+ See the tools documentation for supported probes and how to
+ connect them. Be aware that the board has only 128 KB of SRAM,
+ therefore U-Boot must fit within this space to debug an image
+ intended for the Flash. This issues is discussed in a separate
+ section toward the end.
+
+ Mapping to flash allows U-Boot to start on reset, provided it
+ has been programmed into the first two 64 KB sectors of the Flash.
+
+ The Flash is always mapped at a device (memory mapped I/O) address
+ (the address is board specific and is expressed as CFG_FLASH_BASE).
+ The device address is used by U-Boot to program the flash, and may
+ be used to specify an application to run or U-Boot image to boot.
+
+Default MAC Address (DIP switches 1-6):
+
+ When the board is first powered on, or after the environment has
+ been reinitialized, the ethernet MAC address receives a default
+ value whose least significant 6 bits come from DIP switches 1-6.
+ The default is 00:50:C2:13:6F:xx where xx ranges from 0..3F
+ according to the DIP switches, where "on"==1 and "off"==0, and
+ switch 1 is the least-significant bit.
+
+ After initial startup, the MAC address is stored in the U-Boot
+ environment variable 'ethaddr'. The user may change this to any
+ other address with the "setenv" comamnd. After the environment
+ has been saved to Flash by the "saveenv" command, this will be
+ used and the DIP switches no longer consulted. DIP swithes 1-6
+ may then be used for application purposes.
+
+The KC705 board contains 4-way DIP switch, way 1 is the boot mapping
+switch and ways 2-4 control the low three bits of the MAC address.
+
+
+Limitation of SDRAM Size for OCD Debugging on the LX60
+------------------------------------------------------
+
+The XT-AV60 board has only 128 KB of SDRAM that can be mapped
+to the system ROM address space for debugging a ROM image under
+OCD/JTAG. This limits the useful size of U-Boot to 128 KB (0x20000)
+or the first 2 sectors of the flash.
+
+This can pose a problem if all the sources are compiled with -O0
+for debugging. The code size is then too large, in which case it
+would be necessary to temporarily alter the linker script to place
+the load addresses (LMA) in the RAM (VMA) so that OCD loads U-Boot
+directly there and does not unpack. In practice this is not really
+necessary as long as only a limited set of sources need to be
+debugged, because the image can still fit into the 128 KB SRAM.
+
+The recommended procedure for debugging is to first build U-Boot
+with the default optimization level (-Os), and then touch and
+rebuild incrementally with -O0 so that only the touched sources
+are recompiled with -O0. To build with -O0, pass it in the KCFLAGS
+variable to make.
+
+Because this problem is easy to fall into and difficult to debug
+if one doesn't expect it, the linker script provides a link-time
+check and fatal error message if the image size exceeds 128 KB.
+
diff --git a/board/cadence/xtfpga/xtfpga.c b/board/cadence/xtfpga/xtfpga.c
new file mode 100644
index 0000000..5899aa6
--- /dev/null
+++ b/board/cadence/xtfpga/xtfpga.c
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2007 - 2013 Tensilica Inc.
+ * (C) Copyright 2014 - 2016 Cadence Design Systems Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/net_ethoc.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/stringify.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Check board idendity.
+ * (Print information about the board to stdout.)
+ */
+
+
+#if defined(CONFIG_XTFPGA_LX60)
+const char *board = "XT_AV60";
+const char *description = "Avnet Xilinx LX60 FPGA Evaluation Board / ";
+#elif defined(CONFIG_XTFPGA_LX110)
+const char *board = "XT_AV110";
+const char *description = "Avnet Xilinx Virtex-5 LX110 Evaluation Kit / ";
+#elif defined(CONFIG_XTFPGA_LX200)
+const char *board = "XT_AV200";
+const char *description = "Avnet Xilinx Virtex-4 LX200 Evaluation Kit / ";
+#elif defined(CONFIG_XTFPGA_ML605)
+const char *board = "XT_ML605";
+const char *description = "Xilinx Virtex-6 FPGA ML605 Evaluation Kit / ";
+#elif defined(CONFIG_XTFPGA_KC705)
+const char *board = "XT_KC705";
+const char *description = "Xilinx Kintex-7 FPGA KC705 Evaluation Kit / ";
+#else
+const char *board = "<unknown>";
+const char *description = "";
+#endif
+
+int checkboard(void)
+{
+ printf("Board: %s: %sTensilica bitstream\n", board, description);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_memstart = PHYSADDR(CONFIG_SYS_SDRAM_BASE);
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+}
+
+int board_postclk_init(void)
+{
+ /*
+ * Obtain CPU clock frequency from board and cache in global
+ * data structure (Hz). Return 0 on success (OK to continue),
+ * else non-zero (hang).
+ */
+
+#ifdef CONFIG_SYS_FPGAREG_FREQ
+ gd->cpu_clk = (*(volatile unsigned long *)CONFIG_SYS_FPGAREG_FREQ);
+#else
+ /* early Tensilica bitstreams lack this reg, but most run at 50 MHz */
+ gd->cpu_clk = 50000000UL;
+#endif
+ return 0;
+}
+
+/*
+ * Miscellaneous late initializations.
+ * The environment has been set up, so we can set the Ethernet address.
+ */
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_CMD_NET
+ /*
+ * Initialize ethernet environment variables and board info.
+ * Default MAC address comes from CONFIG_ETHADDR + DIP switches 1-6.
+ */
+
+ char *s = getenv("ethaddr");
+ if (s == 0) {
+ unsigned int x;
+ char s[] = __stringify(CONFIG_ETHBASE);
+ x = (*(volatile u32 *)CONFIG_SYS_FPGAREG_DIPSW)
+ & FPGAREG_MAC_MASK;
+ sprintf(&s[15], "%02x", x);
+ setenv("ethaddr", s);
+ }
+#endif /* CONFIG_CMD_NET */
+
+ return 0;
+}
+
+U_BOOT_DEVICE(sysreset) = {
+ .name = "xtfpga_sysreset",
+};
+
+static struct ethoc_eth_pdata ethoc_pdata = {
+ .eth_pdata = {
+ .iobase = CONFIG_SYS_ETHOC_BASE,
+ },
+ .packet_base = CONFIG_SYS_ETHOC_BUFFER_ADDR,
+};
+
+U_BOOT_DEVICE(ethoc) = {
+ .name = "ethoc",
+ .platdata = &ethoc_pdata,
+};