summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorTsiChung Liew <tsicliew@gmail.com>2010-03-10 16:14:01 -0600
committerTsiChung Liew <tsicliew@gmail.com>2010-03-24 11:09:15 -0500
commit53e4290f20b5f73c95717f47f4c04ed6932ff931 (patch)
treeba1daf034535b500a298aa53c54bf14a0b0eebf2 /board
parentac265f7fcab1a09b9a837a34ef8b10acc101695e (diff)
downloadu-boot-imx-53e4290f20b5f73c95717f47f4c04ed6932ff931.zip
u-boot-imx-53e4290f20b5f73c95717f47f4c04ed6932ff931.tar.gz
u-boot-imx-53e4290f20b5f73c95717f47f4c04ed6932ff931.tar.bz2
ColdFire: M5271EVB DRAM Bring up issue
Fix proper portsize: The register for portsize is either 00b, 01b, or 1xb. The value that previous assigned is 32d. Fix DRAM bring up: insert asm("nop") for every DRAM register setup Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/m5271evb/m5271evb.c12
1 files changed, 10 insertions, 2 deletions
diff --git a/board/freescale/m5271evb/m5271evb.c b/board/freescale/m5271evb/m5271evb.c
index 5505cc4..446f102 100644
--- a/board/freescale/m5271evb/m5271evb.c
+++ b/board/freescale/m5271evb/m5271evb.c
@@ -47,6 +47,7 @@ phys_size_t initdram (int board_type) {
MCF_GPIO_SDRAM_SDWE | MCF_GPIO_SDRAM_SCAS |
MCF_GPIO_SDRAM_SRAS | MCF_GPIO_SDRAM_SCKE |
MCF_GPIO_SDRAM_SDCS_11);
+ asm(" nop");
/*
* Check to see if the SDRAM has already been initialized
@@ -55,8 +56,9 @@ phys_size_t initdram (int board_type) {
if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
/* Initialize DRAM Control Register: DCR */
mbar_writeShort(MCF_SDRAMC_DCR,
- MCF_SDRAMC_DCR_RTIM(0x01)
- | MCF_SDRAMC_DCR_RC(0x30));
+ MCF_SDRAMC_DCR_RTIM(2)
+ | MCF_SDRAMC_DCR_RC(0x2E));
+ asm(" nop");
/*
* Initialize DACR0
@@ -70,15 +72,18 @@ phys_size_t initdram (int board_type) {
| MCF_SDRAMC_DACRn_CASL(1)
| MCF_SDRAMC_DACRn_CBM(3)
| MCF_SDRAMC_DACRn_PS(0));
+ asm(" nop");
/* Initialize DMR0 */
mbar_writeLong(MCF_SDRAMC_DMR0,
MCF_SDRAMC_DMRn_BAM_16M
| MCF_SDRAMC_DMRn_V);
+ asm(" nop");
/* Set IP bit in DACR */
mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
| MCF_SDRAMC_DACRn_IP);
+ asm(" nop");
/* Wait at least 20ns to allow banks to precharge */
for (i = 0; i < 5; i++)
@@ -86,6 +91,7 @@ phys_size_t initdram (int board_type) {
/* Write to this block to initiate precharge */
*(u32 *)(CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
+ asm(" nop");
/* Set RE bit in DACR */
mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
@@ -98,6 +104,7 @@ phys_size_t initdram (int board_type) {
/* Finish the configuration by issuing the MRS */
mbar_writeLong(MCF_SDRAMC_DACR0, mbar_readLong(MCF_SDRAMC_DACR0)
| MCF_SDRAMC_DACRn_MRS);
+ asm(" nop");
/*
* Write to the SDRAM Mode Register A0-A11 = 0x400
@@ -109,6 +116,7 @@ phys_size_t initdram (int board_type) {
* Burst Length = 1
*/
*(u32 *)(CONFIG_SYS_SDRAM_BASE + 0x400) = 0xa5a5a5a5;
+ asm(" nop");
}
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;