summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.masahiro@socionext.com>2015-03-17 12:28:08 +0900
committerTom Rini <trini@konsulko.com>2015-03-17 11:00:22 -0400
commit41eb4e5c31fa0db032a596f00fe925185102d0f7 (patch)
tree821929c11c72a2892ada302caec42d0680bf8f9b /board
parent6beecd5d09f1fab5b8e6cc0a48d1441a4548dbac (diff)
downloadu-boot-imx-41eb4e5c31fa0db032a596f00fe925185102d0f7.zip
u-boot-imx-41eb4e5c31fa0db032a596f00fe925185102d0f7.tar.gz
u-boot-imx-41eb4e5c31fa0db032a596f00fe925185102d0f7.tar.bz2
powerpc: mpc5xxx: remove galaxy5200 board support
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Eric Millbrandt <emillbrandt@dekaresearch.com>
Diffstat (limited to 'board')
-rw-r--r--board/galaxy5200/Kconfig9
-rw-r--r--board/galaxy5200/MAINTAINERS7
-rw-r--r--board/galaxy5200/Makefile8
-rw-r--r--board/galaxy5200/galaxy5200.c185
4 files changed, 0 insertions, 209 deletions
diff --git a/board/galaxy5200/Kconfig b/board/galaxy5200/Kconfig
deleted file mode 100644
index 3103581..0000000
--- a/board/galaxy5200/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_GALAXY5200
-
-config SYS_BOARD
- default "galaxy5200"
-
-config SYS_CONFIG_NAME
- default "galaxy5200"
-
-endif
diff --git a/board/galaxy5200/MAINTAINERS b/board/galaxy5200/MAINTAINERS
deleted file mode 100644
index 614625d..0000000
--- a/board/galaxy5200/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-GALAXY5200 BOARD
-#M: Eric Millbrandt <emillbrandt@dekaresearch.com>
-S: Orphan (since 2014-06)
-F: board/galaxy5200/
-F: include/configs/galaxy5200.h
-F: configs/galaxy5200_defconfig
-F: configs/galaxy5200_LOWBOOT_defconfig
diff --git a/board/galaxy5200/Makefile b/board/galaxy5200/Makefile
deleted file mode 100644
index e0fcd39..0000000
--- a/board/galaxy5200/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := galaxy5200.o
diff --git a/board/galaxy5200/galaxy5200.c b/board/galaxy5200/galaxy5200.c
deleted file mode 100644
index 5d957b7..0000000
--- a/board/galaxy5200/galaxy5200.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2006
- * Eric Schumann, Phytec Messtechnik GmbH
- *
- * (C) Copyright 2009
- * Eric Millbrandt, DEKA Research and Development Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start(int hi_addr)
-{
- volatile struct mpc5xxx_cdm *cdm =
- (struct mpc5xxx_cdm *)MPC5XXX_CDM;
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
-
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000000 | hi_addr_bit));
-
- /* precharge all banks */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
-
-#ifdef SDRAM_DDR
- /* set mode register: extended mode */
- out_be32 (&sdram->mode, (SDRAM_EMODE));
-
- /* set mode register: reset DLL */
- out_be32 (&sdram->mode, (SDRAM_MODE | 0x04000000));
-#endif
-
- /* precharge all banks */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
-
- /* auto refresh */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | 0x80000004 | hi_addr_bit));
-
- /* set mode register */
- out_be32 (&sdram->mode, (SDRAM_MODE));
-
- /* normal operation */
- out_be32 (&sdram->ctrl,
- (SDRAM_CONTROL | hi_addr_bit));
-
- /* set CDM clock enable register, set MPC5200B SDRAM bus */
- /* to reduced driver strength */
- out_be32 (&cdm->clock_enable, (0x00CFFFFF));
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make
- * real use of CONFIG_SYS_SDRAM_BASE. The code does not
- * work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-phys_size_t initdram(int board_type)
-{
- volatile struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
- volatile struct mpc5xxx_sdram *sdram =
- (struct mpc5xxx_sdram *)MPC5XXX_SDRAM;
- ulong dramsize = 0;
- ulong dramsize2 = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- /* 256MB at 0x0 */
- out_be32 (&mm->sdram0, 0x0000001b);
- /* disabled */
- out_be32 (&mm->sdram1, 0x10000000);
-
- /* setup config registers */
- out_be32 (&sdram->config1, SDRAM_CONFIG1);
- out_be32 (&sdram->config2, SDRAM_CONFIG2);
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000);
- sdram_start(1);
- test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else
- dramsize = test2;
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20))
- dramsize = 0;
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- out_be32 (&mm->sdram0,
- (0x13 + __builtin_ffs(dramsize >> 20) - 1));
- } else {
- /* disabled */
- out_be32 (&mm->sdram0, 0);
- }
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = in_be32(&mm->sdram0) & 0xFF;
- if (dramsize >= 0x13)
- dramsize = (1 << (dramsize - 0x13)) << 20;
- else
- dramsize = 0;
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = in_be32(&mm->sdram1) & 0xFF;
- if (dramsize2 >= 0x13)
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- else
- dramsize2 = 0;
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- return dramsize + dramsize2;
-}
-
-int checkboard(void)
-{
- puts("Board: galaxy5200\n");
- return 0;
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
- return 0;
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
- volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT;
- debug ("init_ide_reset\n");
-
- /* Configure TIMER_5 as GPIO output for ATA reset */
- /* Deassert reset */
- gpt[5].emsr = MPC5XXX_GPT_GPIO_OUT1 | MPC5XXX_GPT_TMS_GPIO;
-}
-
-void ide_set_reset (int idereset)
-{
- volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT;
- debug ("ide_reset(%d)\n", idereset);
-
- /* Configure TIMER_5 as GPIO output for ATA reset */
- if (idereset) {
- gpt[5].emsr = MPC5XXX_GPT_GPIO_OUT0 | MPC5XXX_GPT_TMS_GPIO;
-
- /* Make a delay. MPC5200 spec says 25 usec min */
- udelay(50);
- } else {
- gpt[5].emsr = MPC5XXX_GPT_GPIO_OUT1 | MPC5XXX_GPT_TMS_GPIO;
- udelay(50);
- }
-}
-#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */