MLK-14375-3 mx6ullevk: Add 9x9 EVK board support

1. Add build configs for i.MX6ULL 9X9 EVK. Enable DM I2C driver and
   DM PMIC driver for pfuze3000. Convert power init codes to use
   DM PMIC driver.

2. Add lpddr2 script IMX6ULL_9X9_LPDDR2_400MHz_16bit_V1.2.inc for
   the 9x9 board.
   Refer the commit 44a84b44a84cd1bdcc54d722987e5f109510891b

3. Add DTS file for 9x9 evk board.

Signed-off-by: Ye Li <ye.li@nxp.com>

3 files changed, 314 insertions, 0 deletions

diff --git a/board/freescale/mx6ullevk/imximage_lpddr2.cfg b/board/freescale/mx6ullevk/imximage_lpddr2.cfg
new file mode 100644
index 0000000..4fa9103
--- /dev/null
+++ b/board/freescale/mx6ullevk/imximage_lpddr2.cfg
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi/sd/nand/onenand, qspi/nor
+ */
+
+#ifdef CONFIG_QSPI_BOOT
+BOOT_FROM	qspi
+#elif defined(CONFIG_NOR_BOOT)
+BOOT_FROM	nor
+#else
+BOOT_FROM	sd
+#endif
+
+#ifdef CONFIG_USE_IMXIMG_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6ullevk/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+
+DATA 4 0x020E04B4 0x00080000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x00000030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000000
+DATA 4 0x020E0264 0x00000000
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00003030
+DATA 4 0x020E0284 0x00003030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B085C 0x1b4700c7
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B0890 0x23400A38
+DATA 4 0x021B08b8 0x00000800
+
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B083C 0x20000000
+DATA 4 0x021B0848 0x40403439
+DATA 4 0x021B0850 0x4040342D
+DATA 4 0x021B08C0 0x00921012
+DATA 4 0x021B08b8 0x00000800
+
+DATA 4 0x021B0004 0x00020052
+DATA 4 0x021B0008 0x00000000
+DATA 4 0x021B000C 0x33374133
+DATA 4 0x021B0010 0x00100A82
+DATA 4 0x021B0038 0x00170557
+DATA 4 0x021B0014 0x00000093
+DATA 4 0x021B0018 0x00201748
+DATA 4 0x021B002C 0x0F9F26D2
+DATA 4 0x021B0030 0x009F0010
+DATA 4 0x021B0040 0x00000047
+DATA 4 0x021B0000 0x83100000
+DATA 4 0x021B001C 0x00008010
+DATA 4 0x021B001C 0x003F8030
+DATA 4 0x021B001C 0xFF0A8030
+DATA 4 0x021B001C 0x82018030
+DATA 4 0x021B001C 0x04028030
+DATA 4 0x021B001C 0x01038030
+DATA 4 0x021B0020 0x00001800
+DATA 4 0x021B0818 0x00000000
+DATA 4 0x021B0800 0xA1310003
+DATA 4 0x021B0004 0x00025552
+DATA 4 0x021B0404 0x00011006
+DATA 4 0x021B001C 0x00000000
+#endif
diff --git a/board/freescale/mx6ullevk/mx6ullevk.c b/board/freescale/mx6ullevk/mx6ullevk.c
index 0bf8e10..fce1f39 100644
--- a/board/freescale/mx6ullevk/mx6ullevk.c
+++ b/board/freescale/mx6ullevk/mx6ullevk.c
@@ -145,6 +145,82 @@ void ldo_mode_set(int ldo_bypass)
 #endif
 #endif
 
+#ifdef CONFIG_DM_PMIC
+int power_init_board(void)
+{
+	struct udevice *dev;
+	int ret, dev_id, rev_id;
+	unsigned int reg;
+
+	ret = pmic_get("pfuze3000", &dev);
+	if (ret == -ENODEV)
+		return 0;
+	if (ret != 0)
+		return ret;
+
+	dev_id = pmic_reg_read(dev, PFUZE3000_DEVICEID);
+	rev_id = pmic_reg_read(dev, PFUZE3000_REVID);
+	printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
+
+	/* disable Low Power Mode during standby mode */
+	reg = pmic_reg_read(dev, PFUZE3000_LDOGCTL);
+	reg |= 0x1;
+	pmic_reg_write(dev, PFUZE3000_LDOGCTL, reg);
+
+	/* SW1B step ramp up time from 2us to 4us/25mV */
+	reg = 0x40;
+	pmic_reg_write(dev, PFUZE3000_SW1BCONF, reg);
+
+	/* SW1B mode to APS/PFM */
+	reg = 0xc;
+	pmic_reg_write(dev, PFUZE3000_SW1BMODE, reg);
+
+	/* SW1B standby voltage set to 0.975V */
+	reg = 0xb;
+	pmic_reg_write(dev, PFUZE3000_SW1BSTBY, reg);
+
+	return 0;
+}
+
+#ifdef CONFIG_LDO_BYPASS_CHECK
+void ldo_mode_set(int ldo_bypass)
+{
+	unsigned int value;
+	u32 vddarm;
+	struct udevice *dev;
+	int ret;
+
+	ret = pmic_get("pfuze3000", &dev);
+	if (ret == -ENODEV) {
+		printf("No PMIC found!\n");
+		return;
+	}
+
+	/* switch to ldo_bypass mode */
+	if (ldo_bypass) {
+		prep_anatop_bypass();
+		/* decrease VDDARM to 1.275V */
+		value = pmic_reg_read(dev, PFUZE3000_SW1BVOLT);
+		value &= ~0x1f;
+		value |= PFUZE3000_SW1AB_SETP(1275);
+		pmic_reg_write(dev, PFUZE3000_SW1BVOLT, value);
+
+		set_anatop_bypass(1);
+		vddarm = PFUZE3000_SW1AB_SETP(1175);
+
+		value = pmic_reg_read(dev, PFUZE3000_SW1BVOLT);
+		value &= ~0x1f;
+		value |= vddarm;
+		pmic_reg_write(dev, PFUZE3000_SW1BVOLT, value);
+
+		finish_anatop_bypass();
+
+		printf("switch to ldo_bypass mode!\n");
+	}
+}
+#endif
+#endif
+
 int dram_init(void)
 {
 	gd->ram_size = imx_ddr_size();
diff --git a/board/freescale/mx6ullevk/plugin.S b/board/freescale/mx6ullevk/plugin.S
index 65a3c45..6b3870da 100644
--- a/board/freescale/mx6ullevk/plugin.S
+++ b/board/freescale/mx6ullevk/plugin.S
@@ -116,6 +116,120 @@
 	str r1, [r0, #0x01C]
 .endm
 
+.macro imx6ull_lpddr2_evk_setting
+	ldr r0, =IOMUXC_BASE_ADDR
+	ldr r1, =0x00080000
+	str r1, [r0, #0x4B4]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x4AC]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x27C]
+	str r1, [r0, #0x250]
+	str r1, [r0, #0x24C]
+	str r1, [r0, #0x490]
+	str r1, [r0, #0x288]
+
+	ldr r1, =0x00000000
+	str r1, [r0, #0x270]
+	str r1, [r0, #0x260]
+	str r1, [r0, #0x264]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x4A0]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x494]
+
+	ldr r1, =0x00003030
+	str r1, [r0, #0x280]
+	ldr r1, =0x00003030
+	str r1, [r0, #0x284]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x4B0]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x498]
+	str r1, [r0, #0x4A4]
+	str r1, [r0, #0x244]
+	str r1, [r0, #0x248]
+
+	ldr r0, =MMDC_P0_BASE_ADDR
+	ldr r1, =0x00008000
+	str r1, [r0, #0x1C]
+	ldr r1, =0x1b4700c7
+	str r1, [r0, #0x85c]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x23400A38
+	str r1, [r0, #0x890]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8b8]
+	ldr r1, =0x33333333
+	str r1, [r0, #0x81C]
+	str r1, [r0, #0x820]
+	ldr r1, =0xF3333333
+	str r1, [r0, #0x82C]
+	str r1, [r0, #0x830]
+	ldr r1, =0x20000000
+	str r1, [r0, #0x83C]
+	ldr r1, =0x40403439
+	str r1, [r0, #0x848]
+	ldr r1, =0x4040342D
+	str r1, [r0, #0x850]
+	ldr r1, =0x00921012
+	str r1, [r0, #0x8C0]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8B8]
+
+	ldr r1, =0x00020052
+	str r1, [r0, #0x004]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x008]
+	ldr r1, =0x33374133
+	str r1, [r0, #0x00C]
+	ldr r1, =0x00100A82
+	str r1, [r0, #0x010]
+	ldr r1, =0x00170557
+	str r1, [r0, #0x038]
+	ldr r1, =0x00000093
+	str r1, [r0, #0x014]
+	ldr r1, =0x00201748
+	str r1, [r0, #0x018]
+	ldr r1, =0x0F9F26D2
+	str r1, [r0, #0x02C]
+	ldr r1, =0x009F0010
+	str r1, [r0, #0x030]
+	ldr r1, =0x00000047
+	str r1, [r0, #0x040]
+	ldr r1, =0x83100000
+	str r1, [r0, #0x000]
+	ldr r1, =0x00008010
+	str r1, [r0, #0x01C]
+	ldr r1, =0x003F8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0xFF0A8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x82018030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04028030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x01038030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00001800
+	str r1, [r0, #0x020]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x818]
+	ldr r1, =0xA1310003
+	str r1, [r0, #0x800]
+	ldr r1, =0x00025552
+	str r1, [r0, #0x004]
+	ldr r1, =0x00011006
+	str r1, [r0, #0x404]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x01C]
+.endm
+
 .macro imx6_clock_gating
 	ldr r0, =CCM_BASE_ADDR
 	ldr r1, =0xFFFFFFFF
@@ -132,7 +246,11 @@
 .endm
 
 .macro imx6_ddr_setting
+#if defined (CONFIG_TARGET_MX6ULL_9X9_EVK)
+	imx6ull_lpddr2_evk_setting
+#else
 	imx6ull_ddr3_evk_setting
+#endif
 .endm
 
 /* include the common plugin code here */