arm: am57xx: cl-som-am57x: add ETH support

Add MAC support.

Use PHY, connected to RGMII1 as a default Eth adapter,
by appropriate setting of 'cpsw_data.active_slave'.

'cpsw_phy' env variable can override this setting.

Set the MAC addresses in the U-Boot environment.
The addresses are retrieved from the on-board EEPROM or from the SOC's
MAC fuses.

Set the following PHYs RGMII clock delays:
- Enable RX delay
- Disable TX delay

Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
[uri.mashiach@compulab.co.il: add RGMII clock delays]
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Reviewed-by: Tom Rini <trini@konsulko.com>

3 files changed, 223 insertions, 0 deletions

diff --git a/board/compulab/cl-som-am57x/Makefile b/board/compulab/cl-som-am57x/Makefile
index 0c59781..566366b 100644
--- a/board/compulab/cl-som-am57x/Makefile
+++ b/board/compulab/cl-som-am57x/Makefile
@@ -13,3 +13,5 @@ obj-y	+= spl.o mux.o
 else
 obj-y	+= cl-som-am57x.o mux.o
 endif
+
+obj-$(CONFIG_DRIVER_TI_CPSW)	+= eth.o
diff --git a/board/compulab/cl-som-am57x/eth.c b/board/compulab/cl-som-am57x/eth.c
new file mode 100644
index 0000000..0c4bf91
--- /dev/null
+++ b/board/compulab/cl-som-am57x/eth.c
@@ -0,0 +1,198 @@
+/*
+ * Ethernet specific code for CompuLab CL-SOM-AM57x module
+ *
+ * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <cpsw.h>
+#include <miiphy.h>
+#include <asm/gpio.h>
+#include <asm/arch/sys_proto.h>
+#include "../common/eeprom.h"
+
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+}
+
+static struct cpsw_slave_data cl_som_am57x_cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_addr	= 0,
+		.phy_if         = PHY_INTERFACE_MODE_RMII,
+	},
+	{
+		.slave_reg_ofs	= 0x308,
+		.sliver_reg_ofs	= 0xdc0,
+		.phy_addr	= 1,
+		.phy_if         = PHY_INTERFACE_MODE_RMII,
+
+	},
+};
+
+static struct cpsw_platform_data cl_som_am57_cpsw_data = {
+	.mdio_base		= CPSW_MDIO_BASE,
+	.cpsw_base		= CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 2,
+	.slave_data		= cl_som_am57x_cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.bd_ram_ofs		= 0x2000,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+/*
+ * cl_som_am57x_efuse_read_mac_addr() - read Ethernet port MAC address.
+ *       The information is retrieved from the SOC's registers.
+ * @buff: read buffer.
+ * @port_num: port number.
+ */
+static void cl_som_am57x_efuse_read_mac_addr(uchar *buff, uint port_num)
+{
+	uint32_t mac_hi, mac_lo;
+
+	if (port_num) {
+		mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
+		mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
+	} else {
+		mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
+		mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
+	}
+
+	buff[0] = (mac_hi & 0xFF0000) >> 16;
+	buff[1] = (mac_hi & 0xFF00) >> 8;
+	buff[2] = mac_hi & 0xFF;
+	buff[3] = (mac_lo & 0xFF0000) >> 16;
+	buff[4] = (mac_lo & 0xFF00) >> 8;
+	buff[5] = mac_lo & 0xFF;
+}
+
+/*
+ * cl_som_am57x_handle_mac_address() - set MAC address in the U-Boot
+ *	environment.
+ *      The address is retrieved retrieved from an EEPROM field or from the
+ *	SOC's registers.
+ * @env_name: U-Boot environment name.
+ * @field_name: EEPROM field name.
+ * @port_num: SOC's port number.
+ */
+static int cl_som_am57x_handle_mac_address(char *env_name, uint port_num)
+{
+	int ret;
+	uint8_t enetaddr[6];
+
+	ret = eth_getenv_enetaddr(env_name, enetaddr);
+	if (ret)
+		return 0;
+
+	ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
+
+	if (ret || !is_valid_ethaddr(enetaddr))
+		cl_som_am57x_efuse_read_mac_addr(enetaddr, port_num);
+
+	if (!is_valid_ethaddr(enetaddr))
+		return -1;
+
+	ret = eth_setenv_enetaddr(env_name, enetaddr);
+	if (ret)
+		printf("cl-som-am57x: Failed to set Eth port %d MAC address\n",
+		       port_num);
+
+	return ret;
+}
+
+#define CL_SOM_AM57X_PHY_ADDR2			0x01
+#define AR8033_PHY_DEBUG_ADDR_REG		0x1d
+#define AR8033_PHY_DEBUG_DATA_REG		0x1e
+#define AR8033_DEBUG_RGMII_RX_CLK_DLY_REG	0x00
+#define AR8033_DEBUG_RGMII_TX_CLK_DLY_REG	0x05
+#define AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK	(1 << 15)
+#define AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK	(1 << 8)
+
+/*
+ * cl_som_am57x_rgmii_clk_delay() - Set RGMII clock delay.
+ *	Enable RX delay, disable TX delay.
+ */
+static void cl_som_am57x_rgmii_clk_delay(void)
+{
+	uint16_t mii_reg_val;
+	const char *devname;
+
+	devname = miiphy_get_current_dev();
+	/* PHY 2 */
+	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG,
+		     AR8033_DEBUG_RGMII_RX_CLK_DLY_REG);
+	miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
+		    &mii_reg_val);
+	mii_reg_val |= AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK;
+	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
+		     mii_reg_val);
+
+	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG,
+		     AR8033_DEBUG_RGMII_TX_CLK_DLY_REG);
+	miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
+		    &mii_reg_val);
+	mii_reg_val &= ~AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK;
+	miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG,
+		     mii_reg_val);
+}
+
+#define CL_SOM_AM57X_GPIO_PHY1_RST 92 /* GPIO3_28 */
+#define CL_SOM_AM57X_RGMII_PORT1 1
+
+int board_eth_init(bd_t *bis)
+{
+	int ret;
+	uint32_t ctrl_val;
+	char *cpsw_phy_envval;
+	int cpsw_act_phy = 1;
+
+	/* SB-SOM-AM57x primary Eth (P21) is routed to RGMII1 */
+	ret = cl_som_am57x_handle_mac_address("ethaddr",
+					      CL_SOM_AM57X_RGMII_PORT1);
+
+	if (ret)
+		return -1;
+
+	/* Select RGMII for GMII1_SEL */
+	ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
+	ctrl_val |= 0x22;
+	writel(ctrl_val, (*ctrl)->control_core_control_io1);
+	mdelay(10);
+
+	gpio_request(CL_SOM_AM57X_GPIO_PHY1_RST, "phy1_rst");
+	gpio_direction_output(CL_SOM_AM57X_GPIO_PHY1_RST, 0);
+	mdelay(20);
+
+	gpio_set_value(CL_SOM_AM57X_GPIO_PHY1_RST, 1);
+	mdelay(20);
+
+	cpsw_phy_envval = getenv("cpsw_phy");
+	if (cpsw_phy_envval != NULL)
+		cpsw_act_phy = simple_strtoul(cpsw_phy_envval, NULL, 0);
+
+	cl_som_am57_cpsw_data.active_slave = cpsw_act_phy;
+
+	ret = cpsw_register(&cl_som_am57_cpsw_data);
+	if (ret < 0)
+		printf("Error %d registering CPSW switch\n", ret);
+
+	/* Set RGMII clock delay */
+	cl_som_am57x_rgmii_clk_delay();
+
+	return ret;
+}
diff --git a/board/compulab/cl-som-am57x/mux.c b/board/compulab/cl-som-am57x/mux.c
index 625cbc1..5b71975 100644
--- a/board/compulab/cl-som-am57x/mux.c
+++ b/board/compulab/cl-som-am57x/mux.c
@@ -83,6 +83,28 @@ static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = {
 	{USB1_DRVVBUS, (M0 | FSC) }, /* USB1_DRVVBUS.USB1_DRVVBUS */
 };
 
+/* Ethernet */
+static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = {
+	/* MDIO bus */
+	{VIN2A_D10,  (PDIS | PTU  |	  M3) }, /* VIN2A_D10.MDIO_MCLK  */
+	{VIN2A_D11,  (IEN  | PDIS | PTU | M3) }, /* VIN2A_D11.MDIO_D  */
+	/* EMAC Slave 1 at addr 0x1 - Default interface */
+	{VIN2A_D12,  (IDIS | PEN  |	  M3) }, /* VIN2A_D12.RGMII1_TXC */
+	{VIN2A_D13,  (IDIS | PEN  |	  M3) }, /* VIN2A_D13.RGMII1_TXCTL */
+	{VIN2A_D14,  (IDIS | PEN  |	  M3) }, /* VIN2A_D14.RGMII1_TXD3 */
+	{VIN2A_D15,  (IDIS | PEN  |	  M3) }, /* VIN2A_D15.RGMII1_TXD2 */
+	{VIN2A_D16,  (IDIS | PEN  |	  M3) }, /* VIN2A_D16.RGMII1_TXD1 */
+	{VIN2A_D17,  (IDIS | PEN  |	  M3) }, /* VIN2A_D17.RGMII1_TXD0 */
+	{VIN2A_D18,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D18.RGMII1_RXC */
+	{VIN2A_D19,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D19.RGMII1_RXCTL */
+	{VIN2A_D20,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D20.RGMII1_RXD3 */
+	{VIN2A_D21,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D21.RGMII1_RXD2 */
+	{VIN2A_D22,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D22.RGMII1_RXD1 */
+	{VIN2A_D23,  (IEN  | PDIS | PTD | M3) }, /* VIN2A_D23.RGMII1_RXD0 */
+	/* Eth PHY1 reset GPIOs*/
+	{VIN1B_CLK1, (IDIS | PDIS | PTD | M14)}, /* VIN1B_CLK1.GPIO2_31 */
+};
+
 #define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \
 					mux_array, ARRAY_SIZE(mux_array))
 
@@ -97,4 +119,5 @@ void set_muxconf_regs(void)
 	SET_MUX(cl_som_am57x_padconf_i2c_gpio);
 	SET_MUX(cl_som_am57x_padconf_emmc);
 	SET_MUX(cl_som_am57x_padconf_usb);
+	SET_MUX(cl_som_am57x_padconf_ethernet);
 }