Merge branch 'master' of git://git.denx.de/u-boot-atmel

4 files changed, 44 insertions, 14 deletions

diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 2758c5c..1c5b92c 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -10,6 +10,7 @@
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/atmel_usba_udc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/sama5d3_smc.h>
@@ -294,6 +295,9 @@ int board_init(void)
 #ifdef CONFIG_CMD_USB
 	sama5d4_xplained_usb_hw_init();
 #endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
 
 	return 0;
 }
@@ -313,5 +317,12 @@ int board_eth_init(bd_t *bis)
 	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
 #endif
 
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
 	return rc;
 }
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index d3039c0..d8ff648 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -10,6 +10,7 @@
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/atmel_usba_udc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/sama5d3_smc.h>
@@ -293,6 +294,9 @@ int board_init(void)
 #ifdef CONFIG_CMD_USB
 	sama5d4ek_usb_hw_init();
 #endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
 
 	return 0;
 }
@@ -312,5 +316,12 @@ int board_eth_init(bd_t *bis)
 	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
 #endif
 
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
 	return rc;
 }
diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c
index 0a11540..f3f6dae 100644
--- a/board/siemens/corvus/board.c
+++ b/board/siemens/corvus/board.c
@@ -43,13 +43,13 @@ static void corvus_nand_hw_init(void)
 	writel(csa, &matrix->ebicsa);
 
 	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
-	       AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+	       AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
 	       &smc->cs[3].setup);
-	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
-	       AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
+	       AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
 	       &smc->cs[3].pulse);
-	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
 	       &smc->cs[3].cycle);
 	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
 	       AT91_SMC_MODE_EXNW_DISABLE |
@@ -62,9 +62,11 @@ static void corvus_nand_hw_init(void)
 	       &smc->cs[3].mode);
 
 	at91_periph_clk_enable(ATMEL_ID_PIOC);
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
 
 	/* Enable NandFlash */
 	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
 }
 
 #if defined(CONFIG_SPL_BUILD)
diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c
index b8ff478..013dac2 100644
--- a/board/siemens/taurus/taurus.c
+++ b/board/siemens/taurus/taurus.c
@@ -68,6 +68,7 @@ static void taurus_nand_hw_init(void)
 #if defined(CONFIG_SPL_BUILD)
 #include <spl.h>
 #include <nand.h>
+#include <spi_flash.h>
 
 void matrix_init(void)
 {
@@ -81,23 +82,28 @@ void matrix_init(void)
 void at91_spl_board_init(void)
 {
 	taurus_nand_hw_init();
+	at91_spi0_hw_init(TAURUS_SPI_MASK);
 
 	/* Configure recovery button PINs */
 	at91_set_gpio_input(AT91_PIN_PA31, 1);
 
 	/* check if button is pressed */
 	if (at91_get_gpio_value(AT91_PIN_PA31) == 0) {
-		u32 boot_device;
+		struct spi_flash *flash;
 
 		debug("Recovery button pressed\n");
-		boot_device = spl_boot_device();
-		switch (boot_device) {
-#ifdef CONFIG_SPL_NAND_SUPPORT
-		case BOOT_DEVICE_NAND:
-			nand_init();
-			spl_nand_erase_one(0, 0);
-			break;
-#endif
+		nand_init();
+		spl_nand_erase_one(0, 0);
+		flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS,
+					0,
+					CONFIG_SF_DEFAULT_SPEED,
+					SPI_MODE_3);
+		if (!flash) {
+			puts("no flash\n");
+		} else {
+			puts("erase spi flash sector 0\n");
+			spi_flash_erase(flash, 0,
+					CONFIG_SYS_NAND_U_BOOT_SIZE);
 		}
 	}
 }