diff options
author | Nikita Kiryanov <nikita@compulab.co.il> | 2015-07-30 23:56:23 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-08-12 20:48:05 -0400 |
commit | 8883ddafdeb398443870b7996a22cb65fd6d4bb4 (patch) | |
tree | c853ee1a0ff9a17a603678e6a02aa156eddd059f /board | |
parent | 4eaf126e0634d9797c00ed2650e2d1396a4a69a2 (diff) | |
download | u-boot-imx-8883ddafdeb398443870b7996a22cb65fd6d4bb4.zip u-boot-imx-8883ddafdeb398443870b7996a22cb65fd6d4bb4.tar.gz u-boot-imx-8883ddafdeb398443870b7996a22cb65fd6d4bb4.tar.bz2 |
arm: am437x: Introduce new board cm-t43
Add initial support for CM-T43, an AM437x based SoM.
This support includes: serial, MMC/eMMC, NAND, USB, ETH, I2C, GPIO, DRAM
detection.
Cc: Tom Rini <trini@konsulko.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Diffstat (limited to 'board')
-rw-r--r-- | board/compulab/cm_t43/Kconfig | 15 | ||||
-rw-r--r-- | board/compulab/cm_t43/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/compulab/cm_t43/Makefile | 9 | ||||
-rw-r--r-- | board/compulab/cm_t43/board.c | 272 | ||||
-rw-r--r-- | board/compulab/cm_t43/board.h | 12 | ||||
-rw-r--r-- | board/compulab/cm_t43/mux.c | 143 |
6 files changed, 457 insertions, 0 deletions
diff --git a/board/compulab/cm_t43/Kconfig b/board/compulab/cm_t43/Kconfig new file mode 100644 index 0000000..a191889 --- /dev/null +++ b/board/compulab/cm_t43/Kconfig @@ -0,0 +1,15 @@ +if TARGET_CM_T43 + +config SYS_BOARD + default "cm_t43" + +config SYS_VENDOR + default "compulab" + +config SYS_SOC + default "am33xx" + +config SYS_CONFIG_NAME + default "cm_t43" + +endif diff --git a/board/compulab/cm_t43/MAINTAINERS b/board/compulab/cm_t43/MAINTAINERS new file mode 100644 index 0000000..951c370 --- /dev/null +++ b/board/compulab/cm_t43/MAINTAINERS @@ -0,0 +1,6 @@ +CM_T43 BOARD +M: Nikita Kiryanov <nikita@compulab.co.il> +S: Maintained +F: board/compulab/cm_t43/ +F: include/configs/cm_t43.h +F: configs/cm_t43_defconfig diff --git a/board/compulab/cm_t43/Makefile b/board/compulab/cm_t43/Makefile new file mode 100644 index 0000000..3993689 --- /dev/null +++ b/board/compulab/cm_t43/Makefile @@ -0,0 +1,9 @@ +# +# Makefile +# +# Copyright (C) 2015 Compulab, Ltd. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += board.o mux.o diff --git a/board/compulab/cm_t43/board.c b/board/compulab/cm_t43/board.c new file mode 100644 index 0000000..4272c45 --- /dev/null +++ b/board/compulab/cm_t43/board.c @@ -0,0 +1,272 @@ +/* + * Copyright (C) 2015 Compulab, Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <spl.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mux.h> +#include <asm/arch/ddr_defs.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/emif.h> +#include <power/pmic.h> +#include <power/tps65218.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + +const struct dpll_params dpll_mpu = { 800, 24, 1, -1, -1, -1, -1 }; +const struct dpll_params dpll_core = { 1000, 24, -1, -1, 10, 8, 4 }; +const struct dpll_params dpll_per = { 960, 24, 5, -1, -1, -1, -1 }; +const struct dpll_params dpll_ddr = { 400, 23, 1, -1, 1, -1, -1 }; + +const struct ctrl_ioregs ioregs_ddr3 = { + .cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE, + .cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE, + .cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE, + .dt0ioctl = DDR3_DATA0_IOCTRL_VALUE, + .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE, + .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE, + .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE, + .emif_sdram_config_ext = 0x0143, +}; + +/* EMIF DDR3 Configurations are different for production AM43X GP EVMs */ +struct emif_regs ddr3_emif_regs = { + .sdram_config = 0x638413B2, + .ref_ctrl = 0x00000C30, + .sdram_tim1 = 0xEAAAD4DB, + .sdram_tim2 = 0x266B7FDA, + .sdram_tim3 = 0x107F8678, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x50074BE4, + .temp_alert_config = 0x0, + .emif_ddr_phy_ctlr_1 = 0x0E004008, + .emif_ddr_ext_phy_ctrl_1 = 0x08020080, + .emif_ddr_ext_phy_ctrl_2 = 0x00000066, + .emif_ddr_ext_phy_ctrl_3 = 0x00000091, + .emif_ddr_ext_phy_ctrl_4 = 0x000000B9, + .emif_ddr_ext_phy_ctrl_5 = 0x000000E6, + .emif_rd_wr_exec_thresh = 0x80000405, + .emif_prio_class_serv_map = 0x80000001, + .emif_connect_id_serv_1_map = 0x80000094, + .emif_connect_id_serv_2_map = 0x00000000, + .emif_cos_config = 0x000FFFFF +}; + +const u32 ext_phy_ctrl_const_base_ddr3[] = { + 0x00000000, + 0x00000044, + 0x00000044, + 0x00000046, + 0x00000046, + 0x00000000, + 0x00000059, + 0x00000077, + 0x00000093, + 0x000000A8, + 0x00000000, + 0x00000019, + 0x00000037, + 0x00000053, + 0x00000068, + 0x00000000, + 0x0, + 0x0, + 0x40000000, + 0x08102040 +}; + +void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size) +{ + *regs = ext_phy_ctrl_const_base_ddr3; + *size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + +const struct dpll_params *get_dpll_mpu_params(void) +{ + return &dpll_mpu; +} + +const struct dpll_params *get_dpll_core_params(void) +{ + return &dpll_core; +} + +const struct dpll_params *get_dpll_per_params(void) +{ + return &dpll_per; +} + +static void enable_vtt_regulator(void) +{ + u32 temp; + + writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL); + writel(GPIO_SETDATAOUT(7), AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT); + temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE); + temp = temp & ~(GPIO_OE_ENABLE(7)); + writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE); +} + +void sdram_init(void) +{ + unsigned long ram_size; + + enable_vtt_regulator(); + config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0); + ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + if (ram_size == 0x80000000 || + ram_size == 0x40000000 || + ram_size == 0x20000000) + return; + + ddr3_emif_regs.sdram_config = 0x638453B2; + config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0); + ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + if (ram_size == 0x08000000) + return; + + hang(); +} +#endif + +/* setup board specific PMIC */ +int power_init_board(void) +{ + struct pmic *p; + + power_tps65218_init(I2C_PMIC); + p = pmic_get("TPS65218_PMIC"); + if (p && !pmic_probe(p)) + puts("PMIC: TPS65218\n"); + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + gpmc_init(); + set_i2c_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + i2c_probe(TPS65218_CHIP_PM); + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW + +static void cpsw_control(int enabled) +{ + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 0, + .phy_if = PHY_INTERFACE_MODE_RGMII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_addr = 1, + .phy_if = PHY_INTERFACE_MODE_RGMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 2, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +#define GPIO_PHY1_RST 170 +#define GPIO_PHY2_RST 168 + +int board_phy_config(struct phy_device *phydev) +{ + unsigned short val; + + /* introduce tx clock delay */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5); + val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); + val |= 0x0100; + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val); + + if (phydev->drv->config) + return phydev->drv->config(phydev); + + return 0; +} + +static void board_phy_init(void) +{ + set_mdio_pin_mux(); + writel(0x40003, 0x44e10a74); /* Mux pin as clkout2 */ + writel(0x10006, 0x44df4108); /* Select EXTDEV as clock source */ + writel(0x4, 0x44df2e60); /* Set EXTDEV as MNbypass */ + + /* For revision A */ + writel(0x2000009, 0x44df2e6c); + writel(0x38a, 0x44df2e70); + + mdelay(10); + + gpio_request(GPIO_PHY1_RST, "phy1_rst"); + gpio_request(GPIO_PHY2_RST, "phy2_rst"); + gpio_direction_output(GPIO_PHY1_RST, 0); + gpio_direction_output(GPIO_PHY2_RST, 0); + mdelay(2); + + gpio_set_value(GPIO_PHY1_RST, 1); + gpio_set_value(GPIO_PHY2_RST, 1); + mdelay(2); +} + +int board_eth_init(bd_t *bis) +{ + int rv; + + set_rgmii_pin_mux(); + writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel); + board_phy_init(); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + + return rv; +} +#endif diff --git a/board/compulab/cm_t43/board.h b/board/compulab/cm_t43/board.h new file mode 100644 index 0000000..b585db0 --- /dev/null +++ b/board/compulab/cm_t43/board.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2015 Compulab, Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ +void set_i2c_pin_mux(void); +void set_mdio_pin_mux(void); +void set_rgmii_pin_mux(void); +#endif diff --git a/board/compulab/cm_t43/mux.c b/board/compulab/cm_t43/mux.c new file mode 100644 index 0000000..d4bf4b2 --- /dev/null +++ b/board/compulab/cm_t43/mux.c @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2015 Compulab, Ltd. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mux.h> +#include "board.h" + +static struct module_pin_mux rgmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(2)}, + {OFFSET(mii1_txd3), MODE(2)}, + {OFFSET(mii1_txd2), MODE(2)}, + {OFFSET(mii1_txd1), MODE(2)}, + {OFFSET(mii1_txd0), MODE(2)}, + {OFFSET(mii1_txclk), MODE(2)}, + {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE | PULLDOWN_EN}, + {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE | PULLDOWN_EN}, + {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE | PULLDOWN_EN}, + {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE | PULLDOWN_EN}, + {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE | PULLDOWN_EN}, + {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE | PULLDOWN_EN}, + {-1}, +}; + +static struct module_pin_mux rgmii2_pin_mux[] = { + {OFFSET(gpmc_a0), MODE(2)}, /* txen */ + {OFFSET(gpmc_a2), MODE(2)}, /* txd3 */ + {OFFSET(gpmc_a3), MODE(2)}, /* txd2 */ + {OFFSET(gpmc_a4), MODE(2)}, /* txd1 */ + {OFFSET(gpmc_a5), MODE(2)}, /* txd0 */ + {OFFSET(gpmc_a6), MODE(2)}, /* txclk */ + {OFFSET(gpmc_a1), MODE(2) | RXACTIVE | PULLDOWN_EN}, /* rxvd */ + {OFFSET(gpmc_a7), MODE(2) | RXACTIVE | PULLDOWN_EN}, /* rxclk */ + {OFFSET(gpmc_a8), MODE(2) | RXACTIVE | PULLDOWN_EN}, /* rxd3 */ + {OFFSET(gpmc_a9), MODE(2) | RXACTIVE | PULLDOWN_EN}, /* rxd2 */ + {OFFSET(gpmc_a10), MODE(2) | RXACTIVE | PULLDOWN_EN}, /* rxd1 */ + {OFFSET(gpmc_a11), MODE(2) | RXACTIVE | PULLUP_EN}, /* rxd0 */ + {-1}, +}; + +static struct module_pin_mux mdio_pin_mux[] = { + {OFFSET(mdio_data), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(mdio_clk), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, + {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS | PULLUP_EN | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_clk), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(mmc0_cmd), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(mmc0_dat0), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(mmc0_dat1), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(mmc0_dat2), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(mmc0_dat3), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {-1}, +}; + +static struct module_pin_mux i2c_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, + {OFFSET(i2c0_scl), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, + {OFFSET(spi2_sclk), (MODE(1) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, + {OFFSET(spi2_cs0), (MODE(1) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad1), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad2), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad3), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad4), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad5), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad6), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_ad7), (MODE(0) | PULLUDDIS | RXACTIVE)}, + {OFFSET(gpmc_wait0), (MODE(0) | PULLUP_EN | RXACTIVE)}, + {OFFSET(gpmc_wpn), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_wen), (MODE(0) | PULLDOWN_EN)}, + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLDOWN_EN)}, + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLDOWN_EN)}, + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLDOWN_EN)}, + {-1}, +}; + +static struct module_pin_mux emmc_pin_mux[] = { + {OFFSET(gpmc_csn1), (MODE(2) | PULLUDDIS | RXACTIVE)}, /* EMMC_CLK */ + {OFFSET(gpmc_csn2), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_CMD */ + {OFFSET(gpmc_ad8), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT0 */ + {OFFSET(gpmc_ad9), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT1 */ + {OFFSET(gpmc_ad10), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT2 */ + {OFFSET(gpmc_ad11), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT3 */ + {OFFSET(gpmc_ad12), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT4 */ + {OFFSET(gpmc_ad13), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT5 */ + {OFFSET(gpmc_ad14), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT6 */ + {OFFSET(gpmc_ad15), (MODE(2) | PULLUP_EN | RXACTIVE)}, /* EMMC_DAT7 */ + {-1}, +}; + +static struct module_pin_mux spi_flash_pin_mux[] = { + {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | PULLUDEN)}, + {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, + {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | PULLUDEN)}, + {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, + {-1}, +}; + +void set_uart_mux_conf(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void set_mdio_pin_mux(void) +{ + configure_module_pin_mux(mdio_pin_mux); +} + +void set_rgmii_pin_mux(void) +{ + configure_module_pin_mux(rgmii1_pin_mux); + configure_module_pin_mux(rgmii2_pin_mux); +} + +void set_mux_conf_regs(void) +{ + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(emmc_pin_mux); + configure_module_pin_mux(i2c_pin_mux); + configure_module_pin_mux(spi_flash_pin_mux); + configure_module_pin_mux(nand_pin_mux); +} + +void set_i2c_pin_mux(void) +{ + configure_module_pin_mux(i2c_pin_mux); +} |