arm: Remove otc570 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 427 deletions

diff --git a/board/esd/otc570/Kconfig b/board/esd/otc570/Kconfig
deleted file mode 100644
index 4966f5f..0000000
--- a/board/esd/otc570/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OTC570
-
-config SYS_BOARD
-	default "otc570"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "otc570"
-
-endif
diff --git a/board/esd/otc570/MAINTAINERS b/board/esd/otc570/MAINTAINERS
deleted file mode 100644
index a7e165d..0000000
--- a/board/esd/otc570/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-OTC570 BOARD
-M:	Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
-S:	Maintained
-F:	board/esd/otc570/
-F:	include/configs/otc570.h
-F:	configs/otc570_defconfig
-F:	configs/otc570_dataflash_defconfig
diff --git a/board/esd/otc570/Makefile b/board/esd/otc570/Makefile
deleted file mode 100644
index 740bb0a..0000000
--- a/board/esd/otc570/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian@popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y				+= otc570.o
-obj-$(CONFIG_HAS_DATAFLASH)	+= partition.o
diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c
deleted file mode 100644
index 4751d0a..0000000
--- a/board/esd/otc570/otc570.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * (C) Copyright 2010-2011
- * Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian@popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/clk.h>
-#include <netdev.h>
-#ifdef CONFIG_LCD
-# include <atmel_lcdc.h>
-# include <lcd.h>
-# ifdef CONFIG_LCD_INFO
-#  include <nand.h>
-#  include <version.h>
-# endif
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static int hw_rev = -1;	/* hardware revision */
-
-int get_hw_rev(void)
-{
-	if (hw_rev >= 0)
-		return hw_rev;
-
-	hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19);
-	hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1;
-	hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2;
-	hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3;
-
-	if (hw_rev == 15)
-		hw_rev = 0;
-
-	return hw_rev;
-}
-
-#ifdef CONFIG_CMD_NAND
-static void otc570_nand_hw_init(void)
-{
-	unsigned long csa;
-	at91_smc_t	*smc 	= (at91_smc_t *) ATMEL_BASE_SMC0;
-	at91_matrix_t	*matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
-
-	/* Enable CS3 */
-	csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
-	writel(csa, &matrix->csa[0]);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
-		AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2),
-		&smc->cs[3].setup);
-
-	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-		&smc->cs[3].pulse);
-
-	writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6),
-		&smc->cs[3].cycle);
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-		AT91_SMC_MODE_DBW_8 |
-		AT91_SMC_MODE_TDF_CYCLE(12),
-		&smc->cs[3].mode);
-
-	/* Configure RDY/BSY */
-	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
-
-	/* Enable NandFlash */
-	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif /* CONFIG_CMD_NAND */
-
-#ifdef CONFIG_MACB
-static void otc570_macb_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-	/* Enable clock */
-	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
-	at91_macb_hw_init();
-}
-#endif
-
-/*
- * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT
- * controller debugging
- * The ET1100 is located at physical address 0x70000000
- * Its process memory is located at physical address 0x70001000
- */
-static void otc570_ethercat_hw_init(void)
-{
-	at91_smc_t	*smc1 	= (at91_smc_t *) ATMEL_BASE_SMC1;
-
-	/* Configure SMC EBI1_CS0 for EtherCAT */
-	writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc1->cs[0].setup);
-	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) |
-		AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9),
-		&smc1->cs[0].pulse);
-	writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6),
-		&smc1->cs[0].cycle);
-	/*
-	 * Configure behavior at external wait signal, byte-select mode, 16 bit
-	 * data bus width, none data float wait states and TDF optimization
-	 */
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY |
-		AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) |
-		AT91_SMC_MODE_TDF, &smc1->cs[0].mode);
-
-	/* Configure RDY/BSY */
-	at91_set_b_periph(AT91_PIO_PORTE, 20, 0);	/* EBI1_NWAIT */
-}
-
-#ifdef CONFIG_LCD
-/* Number of columns and rows, pixel clock in Hz and hsync/vsync polarity */
-vidinfo_t panel_info = {
-	.vl_col =		640,
-	.vl_row =		480,
-	.vl_clk =		25175000,
-	.vl_sync =		ATMEL_LCDC_INVLINE_INVERTED |
-				ATMEL_LCDC_INVFRAME_INVERTED,
-
-	.vl_bpix =		LCD_BPP,/* Bits per pixel, 0 = 1bit, 3 = 8bit */
-	.vl_tft =		1,	/* 0 = passive, 1 = TFT */
-	.vl_vsync_len =		1,	/* Length of vertical sync in NOL */
-	.vl_upper_margin =	35,	/* Idle lines at the frame start */
-	.vl_lower_margin =	5,	/* Idle lines at the end of the frame */
-	.vl_hsync_len =		5,	/* Width of the LCDHSYNC pulse */
-	.vl_left_margin =	112,	/* Idle cycles at the line beginning */
-	.vl_right_margin =	1,	/* Idle cycles at the end of the line */
-
-	.mmio =			ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-	at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
-	at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power down */
-}
-
-static void otc570_lcd_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDVSYNC */
-	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDHSYNC */
-	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDDOTCK */
-	at91_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* LCDDEN */
-	at91_set_b_periph(AT91_PIO_PORTB, 9, 0);	/* LCDCC */
-	at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* LCDD2 */
-	at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* LCDD3 */
-	at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* LCDD4 */
-	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* LCDD5 */
-	at91_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD6 */
-	at91_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD7 */
-	at91_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD10 */
-	at91_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD11 */
-	at91_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDD12 */
-	at91_set_b_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD13 */
-	at91_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDD14 */
-	at91_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDD15 */
-	at91_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDD18 */
-	at91_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDD19 */
-	at91_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDD20 */
-	at91_set_b_periph(AT91_PIO_PORTC, 17, 0);	/* LCDD21 */
-	at91_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDD22 */
-	at91_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDD23 */
-	at91_set_pio_output(AT91_PIO_PORTA, 30, 1);	/* PCI */
-
-	writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += nand_info[i].size;
-
-	lcd_printf("\n%s\n", U_BOOT_VERSION);
-	lcd_printf("CPU at %s MHz\n", strmhz(temp, get_cpu_clk_rate()));
-	lcd_printf("  %ld MB SDRAM, %ld MB NAND\n",
-		dram_size >> 20,
-		nand_size >> 20 );
-	lcd_printf("  Board            : esd ARM9 HMI Panel - OTC570\n");
-	lcd_printf("  Hardware-revision: 1.%d\n", get_hw_rev());
-	lcd_printf("  Mach-type        : %lu\n", gd->bd->bi_arch_number);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(
-		(void *)CONFIG_SYS_SDRAM_BASE,
-		CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
-#endif
-	return rc;
-}
-
-int checkboard(void)
-{
-	char str[32];
-
-	puts("Board            : esd ARM9 HMI Panel - OTC570");
-	if (getenv_f("serial#", str, sizeof(str)) > 0) {
-		puts(", serial# ");
-		puts(str);
-	}
-	printf("\n");
-	printf("Hardware-revision: 1.%d\n", get_hw_rev());
-	printf("Mach-type        : %lu\n", gd->bd->bi_arch_number);
-	return 0;
-}
-
-#ifdef CONFIG_SERIAL_TAG
-void get_board_serial(struct tag_serialnr *serialnr)
-{
-	char *str;
-
-	char *serial = getenv("serial#");
-	if (serial) {
-		str = strchr(serial, '_');
-		if (str && (strlen(str) >= 4)) {
-			serialnr->high = (*(str + 1) << 8) | *(str + 2);
-			serialnr->low = simple_strtoul(str + 3, NULL, 16);
-		}
-	} else {
-		serialnr->high = 0;
-		serialnr->low = 0;
-	}
-}
-#endif
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
-	return hw_rev | 0x100;
-}
-#endif
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-	char		str[64];
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
-	at91_set_a_periph(AT91_PIO_PORTA, 26, 1);	/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* RXD0 */
-	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
-	/* Set USART_MODE = 1 (RS485) */
-	writel(1, 0xFFF8C004);
-
-	printf("USART0: ");
-
-	if (getenv_f("usart0", str, sizeof(str)) == -1) {
-		printf("No entry - assuming 1-wire\n");
-		/* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */
-		at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
-	} else {
-		if (strcmp(str, "1-wire") == 0) {
-			printf("%s\n", str);
-			at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
-		} else if (strcmp(str, "rs485") == 0) {
-			printf("%s\n", str);
-			at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
-		} else {
-			printf("Wrong entry - assuming 1-wire ");
-			printf("(valid values are '1-wire' or 'rs485')\n");
-			at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
-		}
-	}
-#ifdef CONFIG_LCD
-	printf("Display memory address: 0x%08lX\n", gd->fb_base);
-#endif
-
-	return 0;
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-int board_early_init_f(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	/* enable all clocks */
-	writel((1 << ATMEL_ID_PIOA) |
-		(1 << ATMEL_ID_PIOB) |
-		(1 << ATMEL_ID_PIOCDE) |
-		(1 << ATMEL_ID_TWI) |
-		(1 << ATMEL_ID_SPI0) |
-#ifdef CONFIG_LCD
-		(1 << ATMEL_ID_LCDC) |
-#endif
-		(1 << ATMEL_ID_UHP),
-		&pmc->pcer);
-
-	at91_seriald_hw_init();
-
-	/* arch number of OTC570-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_OTC570;
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* initialize ET1100 Controller */
-	otc570_ethercat_hw_init();
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_CMD_NAND
-	otc570_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
-	at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
-	otc570_macb_hw_init();
-#endif
-#ifdef CONFIG_AT91_CAN
-	at91_can_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
-	at91_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
-	otc570_lcd_hw_init();
-#endif
-	return 0;
-}
diff --git a/board/esd/otc570/partition.c b/board/esd/otc570/partition.c
deleted file mode 100644
index b6afafc..0000000
--- a/board/esd/otc570/partition.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-};
-
-/* define the area offsets */
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
-	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
-};