Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

6 files changed, 77 insertions, 21 deletions

diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h
index ea1e9ac..5ef22ae 100644
--- a/board/isee/igep00x0/igep00x0.h
+++ b/board/isee/igep00x0/igep00x0.h
@@ -34,10 +34,13 @@
 const omap3_sysinfo sysinfo = {
 	DDR_STACKED,
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
-	"OMAP3 IGEP v2 board",
+	"IGEPv2",
 #endif
 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
-	"OMAP3 IGEP COM Module",
+	"IGEP COM MODULE/ELECTRON",
+#endif
+#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
+	"IGEP COM PROTON",
 #endif
 #if defined(CONFIG_ENV_IS_IN_ONENAND)
 	"ONENAND",
diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c
index dacc138..3fcf968 100644
--- a/board/matrix_vision/mvblx/fpga.c
+++ b/board/matrix_vision/mvblx/fpga.c
@@ -31,6 +31,7 @@
 #include <ACEX1K.h>
 #include <command.h>
 #include <asm/gpio.h>
+#include <linux/byteorder/generic.h>
 #include "fpga.h"
 
 #ifdef FPGA_DEBUG
@@ -209,9 +210,20 @@ int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
 {
 	unsigned char *data = (unsigned char *) buf;
 	int i;
+	int headerlen = len - cyclone2.size;
+
+	if (headerlen < 0)
+		return FPGA_FAIL;
+	else if (headerlen == sizeof(uint32_t)) {
+		const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */
+		char fpgavers_str[fpgavers_len];
+		snprintf(fpgavers_str, fpgavers_len, "0x%08x",
+				be32_to_cpup((uint32_t*)data));
+		setenv("fpgavers", fpgavers_str);
+	}
 
 	fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
-	for (i = 0; i < len; i++)
+	for (i = headerlen; i < len; i++)
 		_write_fpga(data[i]);
 	fpga_debug("-%s\n", __func__);
 
diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c
index 945a36d..15269c6 100644
--- a/board/matrix_vision/mvblx/sys_eeprom.c
+++ b/board/matrix_vision/mvblx/sys_eeprom.c
@@ -326,10 +326,28 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	return 0;
 }
 
+static inline int is_portrait(void)
+{
+	int i;
+	unsigned int orient_index = 0; /* idx of char which determines orientation */
+
+	for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) {
+		if (e.id[i] == '-') {
+			orient_index = i+1;
+			break;
+		}
+	}
+
+	return (orient_index &&
+			(e.id[orient_index] >= '5') && (e.id[orient_index] <= '8'));
+}
+
 int mac_read_from_eeprom(void)
 {
 	u32 crc, crc_offset = offsetof(struct eeprom, crc);
 	u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */
+#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf"
+#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf"
 
 	if (read_eeprom()) {
 		printf("EEPROM Read failed.\n");
@@ -374,6 +392,12 @@ int mac_read_from_eeprom(void)
 			setenv("serial#", serial_num);
 	}
 
+	/* decide which fpga file to load depending on orientation */
+	if (is_portrait())
+		setenv("fpgafilename", FILENAME_PORTRAIT);
+	else
+		setenv("fpgafilename", FILENAME_LANDSCAPE);
+
 	/* TODO should I calculate CRC here? */
 	return 0;
 }
diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c
index 4d3a1d5..6e9c3d2 100644
--- a/board/phytec/pcm051/mux.c
+++ b/board/phytec/pcm051/mux.c
@@ -35,7 +35,6 @@ static struct module_pin_mux mmc0_pin_mux[] = {
 	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
 	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
 	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
-	{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)},		/* MMC0_WP */
 	{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)},	/* MMC0_CD */
 	{-1},
 };
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 48e6896..441758f 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -389,7 +389,8 @@ int board_late_init(void)
 }
 #endif
 
-#ifdef CONFIG_DRIVER_TI_CPSW
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
 static void cpsw_control(int enabled)
 {
 	/* VTP can be added here */
@@ -434,26 +435,26 @@ static struct cpsw_platform_data cpsw_data = {
 int board_eth_init(bd_t *bis)
 {
 	int rv, n = 0;
-#ifdef CONFIG_DRIVER_TI_CPSW
 	uint8_t mac_addr[6];
 	uint32_t mac_hi, mac_lo;
 
-	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
-		printf("<ethaddr> not set. Reading from E-fuse\n");
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+	/* try reading mac address from efuse */
+	mac_lo = readl(&cdev->macid0l);
+	mac_hi = readl(&cdev->macid0h);
+	mac_addr[0] = mac_hi & 0xFF;
+	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+	mac_addr[4] = mac_lo & 0xFF;
+	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+	if (!getenv("ethaddr")) {
+		printf("<ethaddr> not set. Validating first E-fuse MAC\n");
 
 		if (is_valid_ether_addr(mac_addr))
 			eth_setenv_enetaddr("ethaddr", mac_addr);
-		else
-			goto try_usbether;
 	}
 
 	if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
@@ -494,8 +495,11 @@ int board_eth_init(bd_t *bis)
 				AR8051_RGMII_TX_CLK_DLY);
 	}
 #endif
-try_usbether:
-#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_USB_ETHER) && \
+	(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
+	if (is_valid_ether_addr(mac_addr))
+		eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
+
 	rv = usb_eth_initialize(bis);
 	if (rv < 0)
 		printf("Error %d registering USB_ETHER\n", rv);
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index b829a79..58bd556 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -72,6 +72,7 @@
 #define BBTOYS_LCD			0x03000B00
 #define BCT_BRETTL3			0x01000F00
 #define BCT_BRETTL4			0x02000F00
+#define LSR_COM6L_ADPT			0x01001300
 #define BEAGLE_NO_EEPROM		0xffffffff
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -227,6 +228,14 @@ static unsigned int get_expansion_id(void)
 	i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
 		 sizeof(expansion_config));
 
+	/* retry reading configuration data with 16bit addressing */
+	if ((expansion_config.device_vendor == 0xFFFFFF00) ||
+	    (expansion_config.device_vendor == 0xFFFFFFFF)) {
+		printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n");
+		i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config,
+			 sizeof(expansion_config));
+	}
+
 	i2c_set_bus_num(TWL4030_I2C_BUS);
 
 	return expansion_config.device_vendor;
@@ -454,6 +463,11 @@ int misc_init_r(void)
 	case BCT_BRETTL4:
 		printf("Recognized bct electronic GmbH brettl4 board\n");
 		break;
+	case LSR_COM6L_ADPT:
+		printf("Recognized LSR COM6L Adapter Board\n");
+		MUX_BBTOYS_WIFI()
+		setenv("buddy", "lsr-com6l-adpt");
+		break;
 	case BEAGLE_NO_EEPROM:
 		printf("No EEPROM on expansion board\n");
 		setenv("buddy", "none");