summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2006-04-01 15:52:46 +0200
committerWolfgang Denk <wd@pollux.denx.de>2006-04-01 15:52:46 +0200
commit534ff676a9c2ffd460e096754894e78551e4ed1e (patch)
tree54c8832a9b2954ed5692c39543935c76ff9481e4 /board
parentd87080b721e4f8dca977af7571c5338ae7bb8db7 (diff)
parent9e7b5ce61b2641e726a38505ffc077642bff44fa (diff)
downloadu-boot-imx-534ff676a9c2ffd460e096754894e78551e4ed1e.zip
u-boot-imx-534ff676a9c2ffd460e096754894e78551e4ed1e.tar.gz
u-boot-imx-534ff676a9c2ffd460e096754894e78551e4ed1e.tar.bz2
* Add support for ymodem protocol download
Patch by Stefano Babic, 29 Mar 2006 * Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000 Merge with /home/mk/8-benq/u-boot
Diffstat (limited to 'board')
-rw-r--r--board/delta/config.mk2
-rw-r--r--board/delta/delta.c44
2 files changed, 31 insertions, 15 deletions
diff --git a/board/delta/config.mk b/board/delta/config.mk
index 9564625..c72e956 100644
--- a/board/delta/config.mk
+++ b/board/delta/config.mk
@@ -2,7 +2,7 @@
#TEXT_BASE = 0xa1700000
#TEXT_BASE = 0xa3080000
#TEXT_BASE = 0x9ffe0000
-TEXT_BASE = 0xa3008000
+TEXT_BASE = 0x83008000
# Compile the new NAND code (needed iff #ifdef CONFIG_NEW_NAND_CODE)
BOARDLIBS = drivers/nand/libnand.a
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 2b72386..b7671dd 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -77,40 +77,56 @@ int dram_init (void)
return 0;
}
-/* initialize the DA9030 Power Controller */
-static void init_DA9030()
+void i2c_init_board()
{
- uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
+ CKENB |= (CKENB_4_I2C);
/* setup I2C GPIO's */
GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */
GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */
+}
- /* rising Edge on EXTON */
- GPIO17 = 0x8800;
- udelay(5);
- GPIO17 = 0xc800;
- udelay(100000); /* wait for DA9030 */
+/* initialize the DA9030 Power Controller */
+static void init_DA9030()
+{
+ uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
+
+ CKENB |= CKENB_7_GPIO;
+ udelay(100);
+
+ /* Rising Edge on EXTON to reset DA9030 */
+ GPIO17 = 0x8800; /* configure GPIO17, no pullup, -down */
+ GPDR0 |= (1<<17); /* GPIO17 is output */
+ GSDR0 = (1<<17);
+ GPCR0 = (1<<17); /* drive GPIO17 low */
+ GPSR0 = (1<<17); /* drive GPIO17 high */
+
+#if CFG_DA9030_EXTON_DELAY
+ udelay((unsigned long) CFG_DA9030_EXTON_DELAY); /* wait for DA9030 */
+#endif
+ GPCR0 = (1<<17); /* drive GPIO17 low */
/* reset the watchdog and go active (0xec) */
val = (SYS_CONTROL_A_HWRES_ENABLE |
(0x6<<4) |
SYS_CONTROL_A_WDOG_ACTION |
SYS_CONTROL_A_WATCHDOG);
-
- i2c_reg_write(addr, SYS_CONTROL_A, val);
+ if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) {
+ printf("Error accessing DA9030 via i2c.\n");
+ return;
+ }
i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */
i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */
- i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */
+ i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */
i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */
i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */
- i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */
+ i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */
i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */
- i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */
+ i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */
i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */
- i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */
+ i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */
i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */
i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */
i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */