summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorAsh Charles <ashcharles@gmail.com>2014-05-07 08:24:11 -0700
committerTom Rini <trini@ti.com>2014-05-13 19:47:51 -0400
commit2d92ba844068a72b50fbedbb17937ed264ef754a (patch)
tree5901af7389bcd7341073685a01426f121500f377 /board
parent532d5318282f9bdc1d6987cfff988c75105d66cf (diff)
downloadu-boot-imx-2d92ba844068a72b50fbedbb17937ed264ef754a.zip
u-boot-imx-2d92ba844068a72b50fbedbb17937ed264ef754a.tar.gz
u-boot-imx-2d92ba844068a72b50fbedbb17937ed264ef754a.tar.bz2
am335x: pepper: Add Gumstix Pepper AM335x-based machine
This adds the Gumstix Pepper[1] single-board computer based on the TI AM335x processor. Schematics are available [2]. [1] https://store.gumstix.com/index.php/products/344/ [2] https://pubs.gumstix.com/boards/PEPPER/ Signed-off-by: Ash Charles <ash@gumstix.com> [trini: Move 'cdev' in board.c down to under #ifdef's where it's used] Signed-off-by: Tom Rini <trini@ti.com>
Diffstat (limited to 'board')
-rw-r--r--board/gumstix/pepper/Makefile13
-rw-r--r--board/gumstix/pepper/board.c226
-rw-r--r--board/gumstix/pepper/board.h19
-rw-r--r--board/gumstix/pepper/mux.c78
4 files changed, 336 insertions, 0 deletions
diff --git a/board/gumstix/pepper/Makefile b/board/gumstix/pepper/Makefile
new file mode 100644
index 0000000..ecb1d61
--- /dev/null
+++ b/board/gumstix/pepper/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y += mux.o
+endif
+
+obj-y += board.o
diff --git a/board/gumstix/pepper/board.c b/board/gumstix/pepper/board.c
new file mode 100644
index 0000000..75aac49
--- /dev/null
+++ b/board/gumstix/pepper/board.c
@@ -0,0 +1,226 @@
+/*
+ * Board functions for Gumstix Pepper and AM335x-based boards
+ *
+ * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/
+ * Based on board/ti/am335x/board.c from Texas Instruments, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <power/tps65217.h>
+#include <environment.h>
+#include <watchdog.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ddr_data ddr2_data = {
+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
+ (MT47H128M16RT25E_RD_DQS<<20) |
+ (MT47H128M16RT25E_RD_DQS<<10) |
+ (MT47H128M16RT25E_RD_DQS<<0)),
+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
+ (MT47H128M16RT25E_WR_DQS<<20) |
+ (MT47H128M16RT25E_WR_DQS<<10) |
+ (MT47H128M16RT25E_WR_DQS<<0)),
+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
+ (MT47H128M16RT25E_PHY_WRLVL<<20) |
+ (MT47H128M16RT25E_PHY_WRLVL<<10) |
+ (MT47H128M16RT25E_PHY_WRLVL<<0)),
+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
+ (MT47H128M16RT25E_PHY_GATELVL<<20) |
+ (MT47H128M16RT25E_PHY_GATELVL<<10) |
+ (MT47H128M16RT25E_PHY_GATELVL<<0)),
+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<20) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<10) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+};
+
+static const struct cmd_control ddr2_cmd_ctrl_data = {
+ .cmd0csratio = MT47H128M16RT25E_RATIO,
+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT47H128M16RT25E_RATIO,
+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT47H128M16RT25E_RATIO,
+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+};
+
+static const struct emif_regs ddr2_emif_reg_data = {
+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
+};
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ return serial_tstc() && serial_getc() == 'c';
+}
+#endif
+
+#define OSC (V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {266, OSC-1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ return &dpll_ddr;
+}
+
+void set_uart_mux_conf(void)
+{
+ enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+ enable_board_pin_mux();
+}
+
+const struct ctrl_ioregs ioregs = {
+ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+};
+
+void sdram_init(void)
+{
+ config_ddr(266, &ioregs, &ddr2_data,
+ &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
+}
+#endif
+
+int board_init(void)
+{
+#if defined(CONFIG_HW_WATCHDOG)
+ hw_watchdog_init();
+#endif
+
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ gpmc_init();
+
+ return 0;
+}
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_addr = 0,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ int rv, n = 0;
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+ const char *devname;
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel);
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+ else
+ n += rv;
+
+ /*
+ *
+ * CPSW RGMII Internal Delay Mode is not supported in all PVT
+ * operating points. So we must set the TX clock delay feature
+ * in the KSZ9021 PHY. Since we only support a single ethernet
+ * device in U-Boot, we only do this for the current instance.
+ */
+ devname = miiphy_get_current_dev();
+ /* max rx/tx clock delay, min rx/tx control delay */
+ miiphy_write(devname, 0x0, 0x0b, 0x8104);
+ miiphy_write(devname, 0x0, 0xc, 0xa0a0);
+
+ /* min rx data delay */
+ miiphy_write(devname, 0x0, 0x0b, 0x8105);
+ miiphy_write(devname, 0x0, 0x0c, 0x0000);
+
+ /* min tx data delay */
+ miiphy_write(devname, 0x0, 0x0b, 0x8106);
+ miiphy_write(devname, 0x0, 0x0c, 0x0000);
+
+ return n;
+}
+#endif
diff --git a/board/gumstix/pepper/board.h b/board/gumstix/pepper/board.h
new file mode 100644
index 0000000..0512735
--- /dev/null
+++ b/board/gumstix/pepper/board.h
@@ -0,0 +1,19 @@
+/*
+ * Gumstix Pepper and AM335x-based boards information header
+ *
+ * Copyright (C) 2014, Gumstix, Inc. - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * We must be able to enable uart0, for initial output. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
diff --git a/board/gumstix/pepper/mux.c b/board/gumstix/pepper/mux.c
new file mode 100644
index 0000000..50b1266
--- /dev/null
+++ b/board/gumstix/pepper/mux.c
@@ -0,0 +1,78 @@
+/*
+ * Muxing for Gumstix Pepper and AM335x-based boards
+ *
+ * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "board.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+ {-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
+ {-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+ /* I2C_DATA */
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+ /* I2C_SCLK */
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+ {-1},
+};
+
+static struct module_pin_mux rgmii1_pin_mux[] = {
+ {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
+ {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
+ {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
+ {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
+ {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
+ {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
+ {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
+ {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
+ {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
+ {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
+ {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
+ {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {OFFSET(rmii1_refclk), MODE(7) | RXACTIVE}, /* ETH_INT */
+ {OFFSET(mii1_col), MODE(7) | PULLUP_EN}, /* PHY_NRESET */
+ {OFFSET(xdma_event_intr1), MODE(3)},
+ {-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
+
+/*
+ * Do board-specific muxes.
+ */
+void enable_board_pin_mux(void)
+{
+ /* I2C0 */
+ configure_module_pin_mux(i2c0_pin_mux);
+ /* SD Card */
+ configure_module_pin_mux(mmc0_pin_mux);
+ /* Ethernet pinmux. */
+ configure_module_pin_mux(rgmii1_pin_mux);
+}