Merge branch 'master' into hpc2

10 files changed, 107 insertions, 153 deletions

diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 0d86518..05bb723 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -295,7 +295,6 @@ void pci_init_board(void)
 #endif
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4	0x01000000UL
 
 void init_ide_reset (void)
 {
@@ -311,9 +310,9 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 4508438..12acc57 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -186,8 +186,6 @@ void pci_init_board(void)
  *****************************************************************************/
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset (void)
 {
 	debug ("init_ide_reset\n");
@@ -202,9 +200,9 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 6c98f13..f14331b 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -199,8 +199,6 @@ void pci_init_board(void
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
@@ -215,9 +213,9 @@ void ide_set_reset(int idereset)
 	debug("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 	}
 }
 #endif				/* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
@@ -242,7 +240,7 @@ void init_ata_reset(void)
 	debug("init_ata_reset\n");
 
 	/* Configure GPIO_WU6 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
 	__asm__ volatile ("sync");
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index 2b47012..1f30d45 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -199,8 +199,6 @@ void pci_init_board(void
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
@@ -215,9 +213,9 @@ void ide_set_reset(int idereset)
 	debug("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 	}
 }
 #endif				/* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
@@ -242,7 +240,7 @@ void init_power_switch(void)
 	debug("init_power_switch\n");
 
 	/* Configure GPIO_WU6 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
 	__asm__ volatile ("sync");
@@ -272,10 +270,10 @@ void power_set_reset(int power)
 	debug("ide_set_reset(%d)\n", power);
 
 	if (power) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_WU6;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_WU6;
 		*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
 		if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) ==
 		    0) {
 			*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |=
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 4f056b2..f958b32 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -308,8 +308,6 @@ void pci_init_board(void)
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset (void)
 {
 	debug ("init_ide_reset\n");
@@ -318,7 +316,7 @@ void init_ide_reset (void)
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
 	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
 }
 
 void ide_set_reset (int idereset)
@@ -326,11 +324,11 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 		/* Make a delay. MPC5200 spec says 25 usec min */
 		udelay(500000);
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c
index 29878f9..d670cc3 100644
--- a/board/inka4x0/inka4x0.c
+++ b/board/inka4x0/inka4x0.c
@@ -173,9 +173,6 @@ void flash_preinit(void)
 	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
 }
 
-#define GPIO_WKUP_7	0x80000000UL
-#define GPIO_PSC3_9	0x04000000UL
-
 int misc_init_f (void)
 {
 	uchar tmp[10];
@@ -218,13 +215,13 @@ int misc_init_f (void)
 	*(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000;
 
 	/* Set LR mirror bit because it is low-active */
-	*(vu_long *)MPC5XXX_WU_GPIO_DATA    |= GPIO_WKUP_7;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O    |= GPIO_WKUP_7;
 	/*
 	 * Reset Coral-P graphics controller
 	 */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC3_9;
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC3_9;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC3_9;
 	return 0;
 }
 
@@ -241,8 +238,6 @@ void pci_init_board(void)
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset (void)
 {
 	debug ("init_ide_reset\n");
@@ -251,7 +246,7 @@ void init_ide_reset (void)
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
 	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
 	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O   |= GPIO_PSC1_4;
 }
 
 void ide_set_reset (int idereset)
@@ -259,11 +254,11 @@ void ide_set_reset (int idereset)
 	debug ("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 		/* Make a delay. MPC5200 spec says 25 usec min */
 		udelay(500000);
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 1d81dce..cb57a5e 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -341,9 +341,7 @@ void pci_init_board(void)
 #define SM501_GPIO_DATA_DIR_HIGH	0x0001000CUL
 #define SM501_GPIO_DATA_HIGH		0x00010004UL
 #define SM501_GPIO_51			0x00080000UL
-#else
-#define GPIO_PSC1_4	0x01000000UL
-#endif
+#endif /* CONFIG MINIFAP */
 
 void init_ide_reset (void)
 {
@@ -381,9 +379,9 @@ void ide_set_reset (int idereset)
 	}
 #else
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 	}
 #endif
 }
diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c
index aaa629e..4e2494e 100644
--- a/board/v38b/ethaddr.c
+++ b/board/v38b/ethaddr.c
@@ -1,5 +1,4 @@
 /*
- *
  * (C) Copyright 2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
@@ -25,48 +24,13 @@
 #include <common.h>
 #include <mpc5xxx.h>
 
-#define GPIO_ENABLE	(MPC5XXX_WU_GPIO)
-
-/* Open Drain Emulation Register */
-#define GPIO_ODR	(MPC5XXX_WU_GPIO + 0x04)
-
-/* Data Direction Register */
-#define GPIO_DDR	(MPC5XXX_WU_GPIO + 0x08)
-
-/* Data Value Out Register */
-#define GPIO_DVOR	(MPC5XXX_WU_GPIO + 0x0C)
-
-/* Interrupt Enable Register */
-#define GPIO_IER	(MPC5XXX_WU_GPIO + 0x10)
-
-/* Individual Interrupt Enable Register */
-#define GPIO_IIER	(MPC5XXX_WU_GPIO + 0x14)
-
-/* Interrupt Type Register */
-#define GPIO_ITR	(MPC5XXX_WU_GPIO + 0x18)
-
-/* Master Enable Register */
-#define GPIO_MER	(MPC5XXX_WU_GPIO + 0x1C)
-
-/* Data Input Value Register */
-#define GPIO_DIVR	(MPC5XXX_WU_GPIO + 0x20)
-
-/* Status Register */
-#define GPIO_SR		(MPC5XXX_WU_GPIO + 0x24)
-
-#define PSC6_0		0x10000000
-#define WKUP_7		0x80000000
-
-/* For NS4 A/B board define WKUP_7, for V38B board PSC_6 */
-#define GPIO_PIN	PSC6_0
+/* For the V38B board the pin is GPIO_PSC_6 */
+#define GPIO_PIN	GPIO_PSC6_0
 
 #define NO_ERROR	0
 #define ERR_NO_NUMBER	1
 #define ERR_BAD_NUMBER	2
 
-typedef volatile unsigned long GPIO_REG;
-typedef GPIO_REG *GPIO_REG_PTR;
-
 static int is_high(void);
 static int check_device(void);
 static void io_out(int value);
@@ -79,33 +43,34 @@ static void write_byte(unsigned char command);
 void read_2501_memory(unsigned char *psernum, unsigned char *perr);
 void board_get_enetaddr(uchar *enetaddr);
 
+
 static int is_high()
 {
-	return (* ((vu_long *) GPIO_DIVR) & GPIO_PIN);
+	return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
 }
 
 static void io_out(int value)
 {
 	if (value)
-		*((vu_long *) GPIO_DVOR) |= GPIO_PIN;
+		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN;
 	else
-		*((vu_long *) GPIO_DVOR) &= ~GPIO_PIN;
+		*((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
 }
 
 static void io_input()
 {
-	*((vu_long *) GPIO_DDR) &= ~GPIO_PIN;
+	*((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
 	udelay(3);	/* allow input to settle */
 }
 
 static void io_output()
 {
-	*((vu_long *) GPIO_DDR) |= GPIO_PIN;
+	*((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN;
 }
 
 static void init_gpio()
 {
-	*((vu_long *) GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
+	*((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN;	/* Enable appropriate pin */
 }
 
 void read_2501_memory(unsigned char *psernum, unsigned char *perr)
@@ -117,8 +82,8 @@ void read_2501_memory(unsigned char *psernum, unsigned char *perr)
 	*perr = 0;
 	crcval = 0;
 
-	for (i=0; i<NBYTES; i++)
-
+	for (i = 0; i < NBYTES; i++)
+		buf[i] = 0;
 
 	if (!check_device())
 		*perr = ERR_NO_NUMBER;
@@ -130,10 +95,10 @@ void read_2501_memory(unsigned char *psernum, unsigned char *perr)
 		write_byte(0x00);
 		read_byte(&crcval);		/* Read CRC of address and command */
 
-		for (i=0; i<NBYTES; i++)
-			read_byte( &buf[i] );
+		for (i = 0; i < NBYTES; i++)
+			read_byte(&buf[i]);
 	}
-	if (strncmp((const char*) &buf[11], "MAREL IEEE 802.3", 16)) {
+	if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
 		*perr = ERR_BAD_NUMBER;
 		psernum[0] = 0x00;
 		psernum[1] = 0xE0;
@@ -141,8 +106,7 @@ void read_2501_memory(unsigned char *psernum, unsigned char *perr)
 		psernum[3] = 0xFF;
 		psernum[4] = 0xFF;
 		psernum[5] = 0xFF;
-	}
-	else {
+	} else {
 		psernum[0] = 0x00;
 		psernum[1] = 0xE0;
 		psernum[2] = 0xEE;
@@ -173,27 +137,23 @@ static void write_byte(unsigned char command)
 {
 	char i;
 
-	for (i=0; i<8; i++) {
+	for (i = 0; i < 8; i++) {
 		/* 1 us to 15 us low pulse starts bit slot */
 		/* Start with high pulse for 3 us */
 		io_input();
-
 		udelay(3);
 
 		io_out(0);
 		io_output();
-
 		udelay(3);
 
 		if (command & 0x01) {
 			/* 60 us high for 1-bit */
 			io_input();
 			udelay(60);
-		}
-		else {
+		} else
 			/* 60 us low for 0-bit */
 			udelay(60);
-		}
 		/*  Leave pin as input */
 		io_input();
 
@@ -201,11 +161,11 @@ static void write_byte(unsigned char command)
 	}
 }
 
-static void read_byte(unsigned char  *data)
+static void read_byte(unsigned char *data)
 {
 	unsigned char i, rdat = 0;
 
-	for (i=0; i<8; i++) {
+	for (i = 0; i < 8; i++) {
 		/* read one bit from one-wire device */
 
 		/* 1 - 15 us low starts bit slot */
@@ -233,22 +193,21 @@ static void read_byte(unsigned char  *data)
 
 void board_get_enetaddr(uchar *enetaddr)
 {
-	unsigned char sn[6], err=NO_ERROR;
+	unsigned char sn[6], err = NO_ERROR;
 
 	init_gpio();
 
 	read_2501_memory(sn, &err);
 
 	if (err == NO_ERROR) {
-		sprintf(enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+		sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
 				sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
 		printf("MAC address: %s\n", enetaddr);
-		setenv("ethaddr", enetaddr);
-	}
-	else {
-		sprintf(enetaddr, "00:01:02:03:04:05");
+		setenv("ethaddr", (char *)enetaddr);
+	} else {
+		sprintf((char *)enetaddr, "00:01:02:03:04:05");
 		printf("Error reading MAC address.\n");
 		printf("Setting default to %s\n", enetaddr);
-		setenv("ethaddr", enetaddr);
+		setenv("ethaddr", (char *)enetaddr);
 	}
 }
diff --git a/board/v38b/u-boot.lds b/board/v38b/u-boot.lds
index 6ec5256..4fdea6b 100644
--- a/board/v38b/u-boot.lds
+++ b/board/v38b/u-boot.lds
@@ -61,6 +61,7 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -93,11 +94,13 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index 99fe7db..dede996 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -28,43 +28,44 @@
 #include <mpc5xxx.h>
 #include <asm/processor.h>
 
+
 #ifndef CFG_RAMBOOT
 static void sdram_start(int hi_addr)
 {
 	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
 
 	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 #if SDRAM_DDR
 	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
 	__asm__ volatile ("sync");
 
 	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
 	__asm__ volatile ("sync");
 #endif /* SDRAM_DDR */
 
 	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
 	__asm__ volatile ("sync");
 
 	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
 	__asm__ volatile ("sync");
 
 	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
 	__asm__ volatile ("sync");
 }
 #endif /* !CFG_RAMBOOT */
@@ -80,18 +81,18 @@ long int initdram(int board_type)
 	ulong test1, test2;
 
 	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
+	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
+	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
 	__asm__ volatile ("sync");
 
 	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
 	__asm__ volatile ("sync");
 
 #if SDRAM_DDR
 	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
 	__asm__ volatile ("sync");
 #endif /* SDRAM_DDR */
 
@@ -112,20 +113,20 @@ long int initdram(int board_type)
 
 	/* set SDRAM CS0 size according to the amount of RAM found */
 	if (dramsize > 0)
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
 	else
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
 
 	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
 
 	/* find RAM size using SDRAM CS1 only */
 	if (!dramsize)
 		sdram_start(0);
-	test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+	test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
 	if (!dramsize) {
 		sdram_start(1);
-		test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+		test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
 	}
 	if (test1 > test2) {
 		sdram_start(0);
@@ -139,22 +140,22 @@ long int initdram(int board_type)
 
 	/* set SDRAM CS1 size according to the amount of RAM found */
 	if (dramsize2 > 0)
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize
 			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
 	else
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 
 #else /* CFG_RAMBOOT */
 
 	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+	dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
 	if (dramsize >= 0x13)
 		dramsize = (1 << (dramsize - 0x13)) << 20;
 	else
 		dramsize = 0;
 
 	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+	dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF;
 	if (dramsize2 >= 0x13)
 		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
 	else
@@ -176,7 +177,7 @@ long int initdram(int board_type)
 	if ((SVR_MJREV(svr) >= 2) &&
 		(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
 
-		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+		*(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04;
 		__asm__ volatile ("sync");
 	}
 
@@ -194,27 +195,42 @@ int checkboard (void)
 int board_early_init_r(void)
 {
 	/*
-	 * Now, when we are in RAM, enable flash write access for detection process.
-	 * Note that CS_BOOT cannot be cleared when executing in flash.
+	 * Now, when we are in RAM, enable flash write access for the
+	 * detection process.  Note that CS_BOOT cannot be cleared when
+	 * executing in flash.
+	 */
+	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+
+#ifdef CONFIG_HW_WATCHDOG
+	/*
+	 * Enable and configure the direction (output) of PSC3_9 - watchdog
+	 * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's
+	 * Manual.
+	 */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
+#endif /* CONFIG_HW_WATCHDOG */
+
+	/*
+	 * Enable GPIO_WKUP_7 to "read the status of the actual power
+	 * situation". Default direction is input, so no need to set it
+	 * explicitly.
 	 */
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7;
 	return 0;
 }
 
 
 #if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-#define GPIO_PSC1_4	0x01000000UL
-
 void init_ide_reset(void)
 {
 	debug("init_ide_reset\n");
 
 	/* Configure PSC1_4 as GPIO output for ATA reset */
 	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
 	/* Deassert reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_DATA   |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
 }
 
 
@@ -223,30 +239,22 @@ void ide_set_reset(int idereset)
 	debug("ide_reset(%d)\n", idereset);
 
 	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
 		/* Make a delay. MPC5200 spec says 25 usec min */
 		udelay(500000);
 	} else
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA |=  GPIO_PSC1_4;
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
 
 
-void led_d4_on(void)
-{
-	/* TIMER7 as GPIO output low */
-	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x24;
-}
-
-
-void led_d4_off(void)
-{
-	/* TIMER7 as GPIO output high */
-	*(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x34;
-}
-
-
+#ifdef CONFIG_HW_WATCHDOG
 void hw_watchdog_reset(void)
 {
-/* TODO fill this in */
+	/*
+	 * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog
+	 * we need a positive or negative transition on WDI i.e., our PSC3_9.
+	 */
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9;
 }
+#endif /* CONFIG_HW_WATCHDOG */