MLK-11364 imx: mx6ul : Add support for i.MX6UL 9x9 EVK board

The i.mx6ul 9x9 EVK shares the same base board with 6ul 14x14 EVK
with two main changes on CPU board:
1. Change to use pfuze 3000.
2. Use 256MB LPDDR2 memory.

This patch uses a macro CONFIG_6UL_9X9_LPDDR2 to distinguish the changes above,
basing on 14x14 EVK board level codes.

The new build target for the 9x9 EVK:  mx6ul_9x9_evk_config

Signed-off-by: Ye.Li <B37916@freescale.com>

3 files changed, 287 insertions, 3 deletions

diff --git a/board/freescale/mx6ul_14x14_evk/imximage_lpddr2.cfg b/board/freescale/mx6ul_14x14_evk/imximage_lpddr2.cfg
new file mode 100644
index 0000000..13b43de
--- /dev/null
+++ b/board/freescale/mx6ul_14x14_evk/imximage_lpddr2.cfg
@@ -0,0 +1,121 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi/sd/nand/onenand, qspi/nor
+ */
+
+#ifdef CONFIG_SYS_BOOT_QSPI
+BOOT_FROM	qspi
+#elif defined(CONFIG_SYS_BOOT_EIMNOR)
+BOOT_FROM	nor
+#else
+BOOT_FROM	sd
+#endif
+
+#ifdef CONFIG_USE_PLUGIN
+/*PLUGIN    plugin-binary-file    IRAM_FREE_START_ADDR*/
+PLUGIN	board/freescale/mx6ul_14x14_evk/plugin.bin 0x00907000
+#else
+
+#ifdef CONFIG_SECURE_BOOT
+CSF CONFIG_CSF_SIZE
+#endif
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+DATA 4 0x020c4068 0xffffffff
+DATA 4 0x020c406c 0xffffffff
+DATA 4 0x020c4070 0xffffffff
+DATA 4 0x020c4074 0xffffffff
+DATA 4 0x020c4078 0xffffffff
+DATA 4 0x020c407c 0xffffffff
+DATA 4 0x020c4080 0xffffffff
+DATA 4 0x020c4084 0xffffffff
+
+DATA 4 0x020E04B4 0x00080000
+DATA 4 0x020E04AC 0x00000000
+DATA 4 0x020E027C 0x00000030
+DATA 4 0x020E0250 0x00000030
+DATA 4 0x020E024C 0x00000030
+DATA 4 0x020E0490 0x00000030
+DATA 4 0x020E0288 0x00000030
+DATA 4 0x020E0270 0x00000000
+DATA 4 0x020E0260 0x00000000
+DATA 4 0x020E0264 0x00000000
+DATA 4 0x020E04A0 0x00000030
+DATA 4 0x020E0494 0x00020000
+DATA 4 0x020E0280 0x00003030
+DATA 4 0x020E0284 0x00003030
+DATA 4 0x020E04B0 0x00020000
+DATA 4 0x020E0498 0x00000030
+DATA 4 0x020E04A4 0x00000030
+DATA 4 0x020E0244 0x00000030
+DATA 4 0x020E0248 0x00000030
+
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B085C 0x1b4700c7
+DATA 4 0x021B0800 0xA1390003
+DATA 4 0x021B0890 0x00470000
+DATA 4 0x021B08b8 0x00000800
+
+DATA 4 0x021B081C 0x33333333
+DATA 4 0x021B0820 0x33333333
+DATA 4 0x021B082C 0xf3333333
+DATA 4 0x021B0830 0xf3333333
+DATA 4 0x021B083C 0x20000000
+DATA 4 0x021B0848 0x4040484F
+DATA 4 0x021B0850 0x40405247
+DATA 4 0x021B08C0 0x00922012
+DATA 4 0x021B08b8 0x00000800
+
+DATA 4 0x021B0004 0x00020012
+DATA 4 0x021B0008 0x00000000
+DATA 4 0x021B000C 0x33374133
+DATA 4 0x021B0010 0x00100A82
+DATA 4 0x021B0038 0x00170557
+DATA 4 0x021B0014 0x00000093
+DATA 4 0x021B0018 0x00001748
+DATA 4 0x021B001C 0x00008000
+DATA 4 0x021B002C 0x0F9F0682
+DATA 4 0x021B0030 0x009F0010
+DATA 4 0x021B0040 0x0000004F
+DATA 4 0x021B0000 0x83100000
+DATA 4 0x021B001C 0x003F8030
+DATA 4 0x021B001C 0xFF0A8030
+DATA 4 0x021B001C 0x82018030
+DATA 4 0x021B001C 0x04028030
+DATA 4 0x021B001C 0x01038030
+DATA 4 0x021B0020 0x00001800
+DATA 4 0x021B0818 0x00000000
+DATA 4 0x021B0800 0xA1310003
+DATA 4 0x021B0004 0x00025576
+DATA 4 0x021B0404 0x00010106
+DATA 4 0x021B001C 0x00000000
+#endif
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index 4ef338f..62a183e 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -27,6 +27,12 @@
 #include <usb.h>
 #include <usb/ehci-fsl.h>
 
+#ifdef CONFIG_POWER
+#include <power/pmic.h>
+#include <power/pfuze300_pmic.h>
+#include "../common/pfuze.h"
+#endif
+
 #ifdef CONFIG_FASTBOOT
 #include <fastboot.h>
 #ifdef CONFIG_ANDROID_RECOVERY
@@ -821,6 +827,41 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#ifdef CONFIG_POWER
+#define I2C_PMIC	0
+int power_init_board(void)
+{
+	struct pmic *p;
+	int ret;
+	unsigned int reg, rev_id;
+
+	ret = power_pfuze300_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("PFUZE300");
+	ret = pmic_probe(p);
+	if (ret)
+		return ret;
+
+	pmic_reg_read(p, PFUZE300_DEVICEID, &reg);
+	pmic_reg_read(p, PFUZE300_REVID, &rev_id);
+	printf("PMIC: PFUZE300 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+
+	/* SW1A/1B step ramp up time from 2us to 4us/25mV */
+	reg = 0x40;
+	pmic_reg_write(p, PFUZE300_SW1ACONF, reg);
+	pmic_reg_write(p, PFUZE300_SW1BCONF, reg);
+
+	/* SW1A/1B standby voltage set to 0.975V */
+	reg = 0xb;
+	pmic_reg_write(p, PFUZE300_SW1ASTBY, reg);
+	pmic_reg_write(p, PFUZE300_SW1BSTBY, reg);
+
+	return 0;
+}
+#endif
+
 int board_init(void)
 {
 	/* Address of boot parameters */
@@ -885,7 +926,11 @@ u32 get_board_rev(void)
 
 int checkboard(void)
 {
-	puts("Board: MX6UL 14x14 EVK\n");
+#if defined(CONFIG_MX6UL_9X9_LPDDR2)
+    puts("Board: MX6UL 9x9 EVK\n");
+#else
+    puts("Board: MX6UL 14x14 EVK\n");
+#endif
 
 	return 0;
 }
diff --git a/board/freescale/mx6ul_14x14_evk/plugin.S b/board/freescale/mx6ul_14x14_evk/plugin.S
index 15f0c29..0fa8633 100644
--- a/board/freescale/mx6ul_14x14_evk/plugin.S
+++ b/board/freescale/mx6ul_14x14_evk/plugin.S
@@ -7,7 +7,7 @@
 #include <config.h>
 
 /* DDR script */
-.macro imx6ul_ddr3_arm2_setting
+.macro imx6ul_ddr3_evk_setting
 	ldr r0, =IOMUXC_BASE_ADDR
 	ldr r1, =0x000C0000
 	str r1, [r0, #0x4B4]
@@ -115,6 +115,120 @@
 	str r1, [r0, #0x01C]
 .endm
 
+.macro imx6ul_lpddr2_evk_setting
+	ldr r0, =IOMUXC_BASE_ADDR
+	ldr r1, =0x00080000
+	str r1, [r0, #0x4B4]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x4AC]
+	ldr r1, =0x00000030
+	str r1, [r0, #0x27C]
+	str r1, [r0, #0x250]
+	str r1, [r0, #0x24C]
+	str r1, [r0, #0x490]
+	str r1, [r0, #0x288]
+
+	ldr r1, =0x00000000
+	str r1, [r0, #0x270]
+	str r1, [r0, #0x260]
+	str r1, [r0, #0x264]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x4A0]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x494]
+
+	ldr r1, =0x00003030
+	str r1, [r0, #0x280]
+	ldr r1, =0x00003030
+	str r1, [r0, #0x284]
+
+	ldr r1, =0x00020000
+	str r1, [r0, #0x4B0]
+
+	ldr r1, =0x00000030
+	str r1, [r0, #0x498]
+	str r1, [r0, #0x4A4]
+	str r1, [r0, #0x244]
+	str r1, [r0, #0x248]
+
+	ldr r0, =MMDC_P0_BASE_ADDR
+	ldr r1, =0x00008000
+	str r1, [r0, #0x1C]
+	ldr r1, =0x1b4700c7
+	str r1, [r0, #0x85c]
+	ldr r1, =0xA1390003
+	str r1, [r0, #0x800]
+	ldr r1, =0x00470000
+	str r1, [r0, #0x890]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8b8]
+	ldr r1, =0x33333333
+	str r1, [r0, #0x81C]
+	str r1, [r0, #0x820]
+	ldr r1, =0xF3333333
+	str r1, [r0, #0x82C]
+	str r1, [r0, #0x830]
+	ldr r1, =0x20000000
+	str r1, [r0, #0x83C]
+	ldr r1, =0x4040484F
+	str r1, [r0, #0x848]
+	ldr r1, =0x40405247
+	str r1, [r0, #0x850]
+	ldr r1, =0x00922012
+	str r1, [r0, #0x8C0]
+	ldr r1, =0x00000800
+	str r1, [r0, #0x8B8]
+	
+	ldr r1, =0x00020012
+	str r1, [r0, #0x004]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x008]
+	ldr r1, =0x33374133
+	str r1, [r0, #0x00C]
+	ldr r1, =0x00100A82
+	str r1, [r0, #0x010]
+	ldr r1, =0x00170557
+	str r1, [r0, #0x038]
+	ldr r1, =0x00000093
+	str r1, [r0, #0x014]
+	ldr r1, =0x00001748
+	str r1, [r0, #0x018]
+	ldr r1, =0x00008000
+	str r1, [r0, #0x01C]
+	ldr r1, =0x0F9F0682
+	str r1, [r0, #0x02C]
+	ldr r1, =0x009F0010
+	str r1, [r0, #0x030]
+	ldr r1, =0x0000004F
+	str r1, [r0, #0x040]
+	ldr r1, =0x83100000
+	str r1, [r0, #0x000]
+	ldr r1, =0x003F8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0xFF0A8030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x82018030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x04028030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x01038030
+	str r1, [r0, #0x01C]
+	ldr r1, =0x00001800
+	str r1, [r0, #0x020]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x818]
+	ldr r1, =0xA1310003
+	str r1, [r0, #0x800]
+	ldr r1, =0x00025576
+	str r1, [r0, #0x004]
+	ldr r1, =0x00010106
+	str r1, [r0, #0x404]
+	ldr r1, =0x00000000
+	str r1, [r0, #0x01C]
+.endm
+
 .macro imx6_clock_gating
 	ldr r0, =CCM_BASE_ADDR
 	ldr r1, =0xFFFFFFFF
@@ -132,7 +246,11 @@
 .endm
 
 .macro imx6_ddr_setting
-	imx6ul_ddr3_arm2_setting
+#if defined (CONFIG_MX6UL_9X9_LPDDR2)
+	imx6ul_lpddr2_evk_setting
+#else
+	imx6ul_ddr3_evk_setting
+#endif
 .endm
 
 /* include the common plugin code here */