summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorVipin KUMAR <vipin.kumar@st.com>2010-01-15 19:15:49 +0530
committerTom Rix <Tom.Rix@windriver.com>2010-01-23 08:15:49 -0600
commitf92994f0f7403b84366ce04e554e461f624e6868 (patch)
tree7c5da7e375042f3bad37acff3216bd0b445a2e48 /board
parent566c9c16fe4e501c3193ae6605bc9c663c6ea706 (diff)
downloadu-boot-imx-f92994f0f7403b84366ce04e554e461f624e6868.zip
u-boot-imx-f92994f0f7403b84366ce04e554e461f624e6868.tar.gz
u-boot-imx-f92994f0f7403b84366ce04e554e461f624e6868.tar.bz2
SPEAr : Support for HW mac id read/write from i2c mem
This patch adds the support to read and write mac id from i2c memory. For reading: if (env contains ethaddr) pick env ethaddr else pick ethaddr from i2c memory For writing: chip_config ethaddr XX:XX:XX:XX:XX:XX writes the mac id in i2c memory Signed-off-by: Vipin <vipin.kumar@st.com>
Diffstat (limited to 'board')
-rwxr-xr-xboard/spear/common/spr_misc.c68
1 files changed, 67 insertions, 1 deletions
diff --git a/board/spear/common/spr_misc.c b/board/spear/common/spr_misc.c
index dfa3ece..204ccf2 100755
--- a/board/spear/common/spr_misc.c
+++ b/board/spear/common/spr_misc.c
@@ -67,6 +67,12 @@ int dram_init(void)
int misc_init_r(void)
{
+#if defined(CONFIG_CMD_NET)
+ uchar mac_id[6];
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
+ eth_setenv_enetaddr("ethaddr", mac_id);
+#endif
setenv("verify", "n");
#if defined(CONFIG_SPEAR_USBTTY)
@@ -101,12 +107,54 @@ int spear_board_init(ulong mach_type)
return 0;
}
+static int i2c_read_mac(uchar *buffer)
+{
+ u8 buf[2];
+
+ i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+ /* Check if mac in i2c memory is valid */
+ if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+ /* Valid mac address is saved in i2c eeprom */
+ i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
+ return 0;
+ }
+
+ return -1;
+}
+
+static int write_mac(uchar *mac)
+{
+ u8 buf[2];
+
+ buf[0] = (u8)MAGIC_BYTE0;
+ buf[1] = (u8)MAGIC_BYTE1;
+ i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+ buf[0] = (u8)~MAGIC_BYTE0;
+ buf[1] = (u8)~MAGIC_BYTE1;
+
+ i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
+
+ /* check if valid MAC address is saved in I2C EEPROM or not? */
+ if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
+ i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
+ puts("I2C EEPROM written with mac address \n");
+ return 0;
+ }
+
+ puts("I2C EEPROM writing failed \n");
+ return -1;
+}
+
int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
void (*sram_setfreq) (unsigned int, unsigned int);
struct chip_data *chip = &chip_data;
unsigned char mac[6];
- unsigned int frequency;
+ unsigned int reg, frequency;
+ char *s, *e;
+ char i2c_mac[20];
if ((argc > 3) || (argc < 2)) {
cmd_usage(cmdtp);
@@ -137,6 +185,17 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
return 0;
+ } else if (!strcmp(argv[1], "ethaddr")) {
+
+ s = argv[2];
+ for (reg = 0; reg < 6; ++reg) {
+ mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
+ if (s)
+ s = (*e) ? e + 1 : e;
+ }
+ write_mac(mac);
+
+ return 0;
} else if (!strcmp(argv[1], "print")) {
if (chip->cpufreq == -1)
@@ -156,6 +215,13 @@ int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
printf("DDR Type = Not Known\n");
+ if (!i2c_read_mac(mac)) {
+ sprintf(i2c_mac, "%pM", mac);
+ printf("Ethaddr (from i2c mem) = %s\n", i2c_mac);
+ } else {
+ printf("Ethaddr (from i2c mem) = Not set\n");
+ }
+
printf("Xloader Rev = %s\n", chip->version);
return 0;