summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorBenoît Thébaudeau <benoit.thebaudeau@advansee.com>2013-05-03 10:32:14 +0000
committerStefano Babic <sbabic@denx.de>2013-05-05 17:55:03 +0200
commitd6208a3cf90cd40318a73d82bbea3716bd536799 (patch)
tree62bd69a4936cc54ebd9135f3c5712e6fdf884d06 /board
parentab3a990b4d8f135af3a1cdcb247585d2d4fd26f0 (diff)
downloadu-boot-imx-d6208a3cf90cd40318a73d82bbea3716bd536799.zip
u-boot-imx-d6208a3cf90cd40318a73d82bbea3716bd536799.tar.gz
u-boot-imx-d6208a3cf90cd40318a73d82bbea3716bd536799.tar.bz2
imx: mx25pdk: Convert to iomux-v3
There is no change of behavior, even if some pad control values could probably be simplified. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/mx25pdk/mx25pdk.c128
1 files changed, 75 insertions, 53 deletions
diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c
index d73e27e..421afea 100644
--- a/board/freescale/mx25pdk/mx25pdk.c
+++ b/board/freescale/mx25pdk/mx25pdk.c
@@ -21,8 +21,7 @@
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/imx25-pinmux.h>
-#include <asm/arch/sys_proto.h>
+#include <asm/arch/iomux-mx25.h>
#include <asm/arch/clock.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -43,29 +42,42 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
};
#endif
+/*
+ * FIXME: need to revisit this
+ * The original code enabled PUE and 100-k pull-down without PKE, so the right
+ * value here is likely:
+ * 0 for no pull
+ * or:
+ * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
+ */
+#define FEC_OUT_PAD_CTRL 0
+
+#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_ODE)
+
static void mx25pdk_fec_init(void)
{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
- u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
-
- /* FEC pin init is generic */
- mx25_fec_init_pins();
-
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
- /*
- * Set up FEC_RESET_B and FEC_ENABLE_B
- *
- * FEC_RESET_B: gpio2_3 is ALT 5 mode of pin D12
- * FEC_ENABLE_B: gpio4_8 is ALT 5 mode of pin A17
- */
- writel(gpio_mux_mode, &muxctl->pad_d12);
- writel(gpio_mux_mode, &muxctl->pad_a17);
-
- writel(0x0, &padctl->pad_d12);
- writel(0x0, &padctl->pad_a17);
+ static const iomux_v3_cfg_t fec_pads[] = {
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL),
+ MX25_PAD_FEC_MDIO__FEC_MDIO,
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+ NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL),
+
+ NEW_PAD_CTRL(MX25_PAD_D12__GPIO_4_8, 0), /* FEC_RESET_B */
+ NEW_PAD_CTRL(MX25_PAD_A17__GPIO_2_3, 0), /* FEC_ENABLE_B */
+ };
+
+ static const iomux_v3_cfg_t i2c_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_I2C1_CLK__I2C1_CLK, I2C_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_I2C1_DAT__I2C1_DAT, I2C_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
/* Assert RESET and ENABLE low */
gpio_direction_output(FEC_RESET_B, 0);
@@ -78,10 +90,7 @@ static void mx25pdk_fec_init(void)
gpio_set_value(FEC_ENABLE_B, 1);
/* Setup I2C pins so that PMIC can turn on PHY supply */
- writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_clk);
- writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_dat);
- writel(0x1E8, &padctl->pad_i2c1_clk);
- writel(0x1E8, &padctl->pad_i2c1_dat);
+ imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
}
int dram_init(void)
@@ -92,9 +101,35 @@ int dram_init(void)
return 0;
}
+/*
+ * Set up input pins with hysteresis and 100-k pull-ups
+ */
+#define UART1_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP)
+/*
+ * FIXME: need to revisit this
+ * The original code enabled PUE and 100-k pull-down without PKE, so the right
+ * value here is likely:
+ * 0 for no pull
+ * or:
+ * PAD_CTL_PUS_100K_DOWN for 100-k pull-down
+ */
+#define UART1_OUT_PAD_CTRL 0
+
+static void mx25pdk_uart1_init(void)
+{
+ static const iomux_v3_cfg_t uart1_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
int board_early_init_f(void)
{
- mx25_uart1_init_pins();
+ mx25pdk_uart1_init();
return 0;
}
@@ -131,21 +166,8 @@ int board_late_init(void)
#ifdef CONFIG_FSL_ESDHC
int board_mmc_getcd(struct mmc *mmc)
{
- struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
- u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
-
- /*
- * Set up the Card Detect pin.
- *
- * SD1_GPIO_CD: gpio2_1 is ALT 5 mode of pin A15
- *
- */
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
-
- writel(gpio_mux_mode, &muxctl->pad_a15);
- writel(0x0, &padctl->pad_a15);
+ /* Set up the Card Detect pin. */
+ imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_A15__GPIO_2_1, 0));
gpio_direction_input(CARD_DETECT);
return !gpio_get_value(CARD_DETECT);
@@ -153,16 +175,16 @@ int board_mmc_getcd(struct mmc *mmc)
int board_mmc_init(bd_t *bis)
{
- struct iomuxc_mux_ctl *muxctl;
- u32 sdhc1_mux_mode = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
-
- muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_cmd);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_clk);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data0);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data1);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data2);
- writel(sdhc1_mux_mode, &muxctl->pad_sd1_data3);
+ static const iomux_v3_cfg_t sdhc1_pads[] = {
+ NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL),
+ NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL),
+ };
+
+ imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);