ARM:AM33XX: Add support for TI AM335X EVM

This patch adds basic support for booting the board.
This patch adds support for the UART necessary to
get to the u-boot prompt.

Signed-off-by: Chandan Nath <chandan.nath@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

4 files changed, 393 insertions, 0 deletions

diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
new file mode 100644
index 0000000..d58b185
--- /dev/null
+++ b/board/ti/am335x/Makefile
@@ -0,0 +1,43 @@
+#
+# Makefile
+#
+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= evm.o mux.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ti/am335x/common_def.h b/board/ti/am335x/common_def.h
new file mode 100644
index 0000000..1696d60
--- /dev/null
+++ b/board/ti/am335x/common_def.h
@@ -0,0 +1,24 @@
+/*
+ * common_def.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __COMMON_DEF_H__
+#define __COMMON_DEF_H__
+
+extern void enable_uart0_pin_mux(void);
+extern void configure_evm_pin_mux(unsigned char daughter_board_id,
+					unsigned short daughter_board_profile,
+					unsigned char daughter_board_flag);
+
+#endif/*__COMMON_DEF_H__ */
diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c
new file mode 100644
index 0000000..b4eddd8
--- /dev/null
+++ b/board/ti/am335x/evm.c
@@ -0,0 +1,48 @@
+/*
+ * evm.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include "common_def.h"
+#include <serial.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_RESET		(0x1 << 1)
+#define UART_CLK_RUNNING_MASK	0x1
+#define UART_SMART_IDLE_EN	(0x1 << 0x3)
+
+/*
+ * Basic board specific setup
+ */
+int init_basic_setup(void)
+{
+	/* Initialize the Timer */
+	init_timer();
+
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+
+	return 0;
+}
+
+int board_init(void)
+{
+	enable_uart0_pin_mux();
+	init_basic_setup();
+
+	return 0;
+}
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
new file mode 100644
index 0000000..8f27409
--- /dev/null
+++ b/board/ti/am335x/mux.c
@@ -0,0 +1,278 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <config.h>
+#include "common_def.h"
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset)	\
+	__raw_writel(value, (CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL	(0x1 << 6)
+#define RXACTIVE	(0x1 << 5)
+#define PULLUP_EN	(0x1 << 4) /* Pull UP Selection */
+#define PULLUDEN	(0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS	(0x1 << 3) /* Pull up disabled */
+#define MODE(val)	val	/* used for Readability */
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+	int gpmc_ad0;
+	int gpmc_ad1;
+	int gpmc_ad2;
+	int gpmc_ad3;
+	int gpmc_ad4;
+	int gpmc_ad5;
+	int gpmc_ad6;
+	int gpmc_ad7;
+	int gpmc_ad8;
+	int gpmc_ad9;
+	int gpmc_ad10;
+	int gpmc_ad11;
+	int gpmc_ad12;
+	int gpmc_ad13;
+	int gpmc_ad14;
+	int gpmc_ad15;
+	int gpmc_a0;
+	int gpmc_a1;
+	int gpmc_a2;
+	int gpmc_a3;
+	int gpmc_a4;
+	int gpmc_a5;
+	int gpmc_a6;
+	int gpmc_a7;
+	int gpmc_a8;
+	int gpmc_a9;
+	int gpmc_a10;
+	int gpmc_a11;
+	int gpmc_wait0;
+	int gpmc_wpn;
+	int gpmc_be1n;
+	int gpmc_csn0;
+	int gpmc_csn1;
+	int gpmc_csn2;
+	int gpmc_csn3;
+	int gpmc_clk;
+	int gpmc_advn_ale;
+	int gpmc_oen_ren;
+	int gpmc_wen;
+	int gpmc_be0n_cle;
+	int lcd_data0;
+	int lcd_data1;
+	int lcd_data2;
+	int lcd_data3;
+	int lcd_data4;
+	int lcd_data5;
+	int lcd_data6;
+	int lcd_data7;
+	int lcd_data8;
+	int lcd_data9;
+	int lcd_data10;
+	int lcd_data11;
+	int lcd_data12;
+	int lcd_data13;
+	int lcd_data14;
+	int lcd_data15;
+	int lcd_vsync;
+	int lcd_hsync;
+	int lcd_pclk;
+	int lcd_ac_bias_en;
+	int mmc0_dat3;
+	int mmc0_dat2;
+	int mmc0_dat1;
+	int mmc0_dat0;
+	int mmc0_clk;
+	int mmc0_cmd;
+	int mii1_col;
+	int mii1_crs;
+	int mii1_rxerr;
+	int mii1_txen;
+	int mii1_rxdv;
+	int mii1_txd3;
+	int mii1_txd2;
+	int mii1_txd1;
+	int mii1_txd0;
+	int mii1_txclk;
+	int mii1_rxclk;
+	int mii1_rxd3;
+	int mii1_rxd2;
+	int mii1_rxd1;
+	int mii1_rxd0;
+	int rmii1_refclk;
+	int mdio_data;
+	int mdio_clk;
+	int spi0_sclk;
+	int spi0_d0;
+	int spi0_d1;
+	int spi0_cs0;
+	int spi0_cs1;
+	int ecap0_in_pwm0_out;
+	int uart0_ctsn;
+	int uart0_rtsn;
+	int uart0_rxd;
+	int uart0_txd;
+	int uart1_ctsn;
+	int uart1_rtsn;
+	int uart1_rxd;
+	int uart1_txd;
+	int i2c0_sda;
+	int i2c0_scl;
+	int mcasp0_aclkx;
+	int mcasp0_fsx;
+	int mcasp0_axr0;
+	int mcasp0_ahclkr;
+	int mcasp0_aclkr;
+	int mcasp0_fsr;
+	int mcasp0_axr1;
+	int mcasp0_ahclkx;
+	int xdma_event_intr0;
+	int xdma_event_intr1;
+	int nresetin_out;
+	int porz;
+	int nnmi;
+	int osc0_in;
+	int osc0_out;
+	int rsvd1;
+	int tms;
+	int tdi;
+	int tdo;
+	int tck;
+	int ntrst;
+	int emu0;
+	int emu1;
+	int osc1_in;
+	int osc1_out;
+	int pmic_power_en;
+	int rtc_porz;
+	int rsvd2;
+	int ext_wakeup;
+	int enz_kaldo_1p8v;
+	int usb0_dm;
+	int usb0_dp;
+	int usb0_ce;
+	int usb0_id;
+	int usb0_vbus;
+	int usb0_drvvbus;
+	int usb1_dm;
+	int usb1_dp;
+	int usb1_ce;
+	int usb1_id;
+	int usb1_vbus;
+	int usb1_drvvbus;
+	int ddr_resetn;
+	int ddr_csn0;
+	int ddr_cke;
+	int ddr_ck;
+	int ddr_nck;
+	int ddr_casn;
+	int ddr_rasn;
+	int ddr_wen;
+	int ddr_ba0;
+	int ddr_ba1;
+	int ddr_ba2;
+	int ddr_a0;
+	int ddr_a1;
+	int ddr_a2;
+	int ddr_a3;
+	int ddr_a4;
+	int ddr_a5;
+	int ddr_a6;
+	int ddr_a7;
+	int ddr_a8;
+	int ddr_a9;
+	int ddr_a10;
+	int ddr_a11;
+	int ddr_a12;
+	int ddr_a13;
+	int ddr_a14;
+	int ddr_a15;
+	int ddr_odt;
+	int ddr_d0;
+	int ddr_d1;
+	int ddr_d2;
+	int ddr_d3;
+	int ddr_d4;
+	int ddr_d5;
+	int ddr_d6;
+	int ddr_d7;
+	int ddr_d8;
+	int ddr_d9;
+	int ddr_d10;
+	int ddr_d11;
+	int ddr_d12;
+	int ddr_d13;
+	int ddr_d14;
+	int ddr_d15;
+	int ddr_dqm0;
+	int ddr_dqm1;
+	int ddr_dqs0;
+	int ddr_dqsn0;
+	int ddr_dqs1;
+	int ddr_dqsn1;
+	int ddr_vref;
+	int ddr_vtp;
+	int ddr_strben0;
+	int ddr_strben1;
+	int ain7;
+	int ain6;
+	int ain5;
+	int ain4;
+	int ain3;
+	int ain2;
+	int ain1;
+	int ain0;
+	int vrefp;
+	int vrefn;
+};
+
+struct module_pin_mux {
+	short reg_offset;
+	unsigned char val;
+};
+
+/* Pad control register offset */
+#define PAD_CTRL_BASE	0x800
+#define OFFSET(x)	(unsigned int) (&((struct pad_signals *) \
+				(PAD_CTRL_BASE))->x)
+
+static struct module_pin_mux uart0_pin_mux[] = {
+	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
+	{OFFSET(uart0_txd), (MODE(0) | PULLUDEN)},		/* UART0_TXD */
+	{-1},
+};
+
+/*
+ * Configure the pin mux for the module
+ */
+static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
+{
+	int i;
+
+	if (!mod_pin_mux)
+		return;
+
+	for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
+		MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+}
+
+void enable_uart0_pin_mux(void)
+{
+	configure_module_pin_mux(uart0_pin_mux);
+}