summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorHeiko Schocher <hs@denx.de>2013-11-18 08:07:23 +0100
committerAndreas Bießmann <andreas.devel@googlemail.com>2013-12-01 22:38:52 +0100
commit4535a24c0c06e367bc40c43b4807bdb335513a1a (patch)
tree96299cbb0828cf3d43e8b14984ebf6e97967ea07 /board
parentc5e8885aab9d282fa480cfa359cf5fd84248abb8 (diff)
downloadu-boot-imx-4535a24c0c06e367bc40c43b4807bdb335513a1a.zip
u-boot-imx-4535a24c0c06e367bc40c43b4807bdb335513a1a.tar.gz
u-boot-imx-4535a24c0c06e367bc40c43b4807bdb335513a1a.tar.bz2
arm926ejs, at91: add common phy_reset function
add common phy reset code into a common function. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Jens Scharsig <esw@bus-elektronik.de> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Stelian Pop <stelian@popies.net> Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Eric Benard <eric@eukrea.com> Cc: Markus Hubig <mhubig@imko.de> Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Diffstat (limited to 'board')
-rw-r--r--board/BuS/vl_ma2sc/vl_ma2sc.c18
-rw-r--r--board/afeb9260/afeb9260.c18
-rw-r--r--board/atmel/at91sam9260ek/at91sam9260ek.c19
-rw-r--r--board/atmel/at91sam9263ek/at91sam9263ek.c19
-rw-r--r--board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c19
-rw-r--r--board/bluewater/snapper9260/snapper9260.c16
-rw-r--r--board/calao/sbc35_a9g20/sbc35_a9g20.c19
-rw-r--r--board/eukrea/cpu9260/cpu9260.c18
-rw-r--r--board/taskit/stamp9g20/stamp9g20.c31
9 files changed, 11 insertions, 166 deletions
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index e2ae6fd..412ff3b 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -16,7 +16,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91sam9263.h>
#include <asm/arch/gpio.h>
#include <asm/arch/at91_common.h>
@@ -76,25 +75,12 @@ static void vl_ma2sc_nand_hw_init(void)
#ifdef CONFIG_MACB
static void vl_ma2sc_macb_hw_init(void)
{
- unsigned long erstl;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
at91_macb_hw_init();
}
diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c
index e1b1c10..ea9575d 100644
--- a/board/afeb9260/afeb9260.c
+++ b/board/afeb9260/afeb9260.c
@@ -13,7 +13,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
@@ -67,8 +66,6 @@ static void afeb9260_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
@@ -94,20 +91,7 @@ static void afeb9260_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
-
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index 263de49..7f14af1 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -12,7 +12,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <atmel_mci.h>
@@ -73,8 +72,6 @@ static void at91sam9260ek_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -98,21 +95,7 @@ static void at91sam9260ek_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 2e9246f..d42a173 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -12,7 +12,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
@@ -82,10 +81,9 @@ static void at91sam9263ek_nand_hw_init(void)
#ifdef CONFIG_MACB
static void at91sam9263ek_macb_hw_init(void)
{
- unsigned long erstl;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
@@ -97,23 +95,10 @@ static void at91sam9263ek_macb_hw_init(void)
*
* PHY has internal pull-down
*/
-
writel(1 << 25, &pio->pioc.pudr);
writel((1 << 25) | (1 <<26), &pio->pioe.pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(1 << 25, &pio->pioc.puer);
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index 6a071f6..b7e2efd 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -12,7 +12,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
@@ -88,8 +87,6 @@ static void at91sam9m10g45ek_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
@@ -107,21 +104,7 @@ static void at91sam9m10g45ek_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA13),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA15) |
diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c
index 8a6919d..bfde129 100644
--- a/board/bluewater/snapper9260/snapper9260.c
+++ b/board/bluewater/snapper9260/snapper9260.c
@@ -14,7 +14,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <net.h>
#include <netdev.h>
@@ -31,8 +30,6 @@ static void macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -54,18 +51,7 @@ static void macb_hw_init(void)
/* Enable ethernet power */
pca953x_set_val(0x28, IO_EXP_ETH_POWER, 0);
- /* Need to reset PHY -> 500ms reset */
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
/* Bring the ethernet out of reset */
pca953x_set_val(0x28, IO_EXP_ETH_RESET, 1);
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
index ecf261c..2074a93 100644
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c
@@ -15,7 +15,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -77,8 +76,6 @@ static void sbc35_a9g20_macb_hw_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable EMAC clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
@@ -102,21 +99,7 @@ static void sbc35_a9g20_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 5e1524e..274f72d 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -17,7 +17,6 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
@@ -89,29 +88,14 @@ static void cpu9260_nand_hw_init(void)
#ifdef CONFIG_MACB
static void cpu9260_macb_hw_init(void)
{
- unsigned long rstcmr;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
/* Enable clock */
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
- rstcmr = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0xD) |
- AT91_RSTC_MR_URSTEN, &rstc->mr);
-
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end hardware reset */
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
- ;
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | rstcmr | AT91_RSTC_MR_URSTEN, &rstc->mr);
+ at91_phy_reset();
at91_macb_hw_init();
}
diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c
index 704a63b..27cdf77 100644
--- a/board/taskit/stamp9g20/stamp9g20.c
+++ b/board/taskit/stamp9g20/stamp9g20.c
@@ -19,7 +19,6 @@
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
#include <watchdog.h>
@@ -67,8 +66,6 @@ static void stamp9G20_nand_hw_init(void)
static void stamp9G20_macb_hw_init(void)
{
struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
- struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
- unsigned long erstl;
/* Enable the PHY Chip via PA26 on the Stamp 2 Adaptor */
at91_set_gpio_output(AT91_PIN_PA26, 0);
@@ -91,33 +88,7 @@ static void stamp9G20_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA28),
&pioa->pudr);
- erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
- /* Need to reset PHY -> 500ms reset */
- writel(AT91_RSTC_KEY | (AT91_RSTC_MR_ERSTL(13) &
- ~AT91_RSTC_MR_URSTEN), &rstc->mr);
- writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-
- /* Wait for end of hardware reset */
- unsigned long start = get_timer(0);
- unsigned long timeout = 1000; /* 1000ms */
-
- while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL)) {
-
- /* avoid shutdown by watchdog */
- WATCHDOG_RESET();
- mdelay(10);
-
- /* timeout for not getting stuck in an endless loop */
- if (get_timer(start) >= timeout) {
- puts("*** ERROR: Timeout waiting for PHY reset!\n");
- break;
- };
- };
-
- /* Restore NRST value */
- writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
- &rstc->mr);
+ at91_phy_reset();
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |