ENGR00315894-6 i.mx6:sabreauto: Add the i.MX6solo sabreauto support

This patch is to add the i.MX6solo sabreauto support,

The i.MX6solo sabreauto board configuration has the following
difference with i.MX6dl sabreauto:

- DDR bus width: 32bit
- DDR capacity:  1024M

Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>

1 files changed, 122 insertions, 0 deletions

diff --git a/board/freescale/mx6qsabreauto/mx6solo.cfg b/board/freescale/mx6qsabreauto/mx6solo.cfg
new file mode 100644
index 0000000..b25d4a7
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6solo.cfg
@@ -0,0 +1,122 @@
+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not write to the Free Software
+ * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+ * MA 02110-1301 USA
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM	sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+DATA 4, 0x020e0774, 0x000C0000
+DATA 4, 0x020e0754, 0x00000000
+DATA 4, 0x020e04ac, 0x00000030
+DATA 4, 0x020e04b0, 0x00000030
+DATA 4, 0x020e0464, 0x00000030
+DATA 4, 0x020e0490, 0x00000030
+DATA 4, 0x020e074c, 0x00000030
+DATA 4, 0x020e0494, 0x00000030
+DATA 4, 0x020e04a0, 0x00000000
+DATA 4, 0x020e04b4, 0x00000030
+DATA 4, 0x020e04b8, 0x00000030
+DATA 4, 0x020e076c, 0x00000030
+DATA 4, 0x020e0750, 0x00020000
+DATA 4, 0x020e04bc, 0x00000028
+DATA 4, 0x020e04c0, 0x00000028
+DATA 4, 0x020e04c4, 0x00000028
+DATA 4, 0x020e04c8, 0x00000028
+DATA 4, 0x020e0760, 0x00020000
+DATA 4, 0x020e0764, 0x00000028
+DATA 4, 0x020e0770, 0x00000028
+DATA 4, 0x020e0778, 0x00000028
+DATA 4, 0x020e077c, 0x00000028
+DATA 4, 0x020e0470, 0x00000028
+DATA 4, 0x020e0474, 0x00000028
+DATA 4, 0x020e0478, 0x00000028
+DATA 4, 0x020e047c, 0x00000028
+DATA 4, 0x021b0800, 0xa1390003
+DATA 4, 0x021b080c, 0x001F001F
+DATA 4, 0x021b0810, 0x001F001F
+DATA 4, 0x021b083c, 0x421C0216
+DATA 4, 0x021b0840, 0x017B017A
+DATA 4, 0x021b0848, 0x4B4A4E4C
+DATA 4, 0x021b0850, 0x3F3F3334
+DATA 4, 0x021b081c, 0x33333333
+DATA 4, 0x021b0820, 0x33333333
+DATA 4, 0x021b0824, 0x33333333
+DATA 4, 0x021b0828, 0x33333333
+DATA 4, 0x021b08b8, 0x00000800
+DATA 4, 0x021b0004, 0x00020025
+DATA 4, 0x021b0008, 0x00333030
+DATA 4, 0x021b000c, 0x676B5313
+DATA 4, 0x021b0010, 0xB66E8B63
+DATA 4, 0x021b0014, 0x01FF00DB
+DATA 4, 0x021b0018, 0x00001740
+DATA 4, 0x021b001c, 0x00008000
+DATA 4, 0x021b002c, 0x000026d2
+DATA 4, 0x021b0030, 0x006B1023
+DATA 4, 0x021b0040, 0x00000027
+DATA 4, 0x021b0000, 0x84190000
+DATA 4, 0x021b001c, 0x04008032
+DATA 4, 0x021b001c, 0x00008033
+DATA 4, 0x021b001c, 0x00048031
+DATA 4, 0x021b001c, 0x05208030
+DATA 4, 0x021b001c, 0x04008040
+DATA 4, 0x021b0020, 0x00005800
+DATA 4, 0x021b0818, 0x00011117
+DATA 4, 0x021b0004, 0x00025565
+DATA 4, 0x021b0404, 0x00011006
+DATA 4, 0x021b001c, 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4, 0x020c4068, 0x00C03F3F
+DATA 4, 0x020c406c, 0x0030FC03
+DATA 4, 0x020c4070, 0x0FFFC000
+DATA 4, 0x020c4074, 0x3FF00000
+DATA 4, 0x020c4078, 0x00FFF300
+DATA 4, 0x020c407c, 0x0F0000C3
+DATA 4, 0x020c4080, 0x000003FF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4, 0x020e0010, 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4, 0x020e0018, 0x007F007F
+DATA 4, 0x020e001c, 0x007F007F