logodl: remove code for yet another corpse

The logodl board has long been unmaintained and left broken.
As obviously nobody is interestedin that code any more, we may as well
remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: August Hoeraendl <august.hoerandl@gmx.at>
Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Marek Vasut <marek.vasut@gmail.com>

5 files changed, 0 insertions, 1466 deletions

diff --git a/board/logodl/Makefile b/board/logodl/Makefile
deleted file mode 100644
index 0795b6b..0000000
--- a/board/logodl/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= logodl.o flash.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/logodl/config.mk b/board/logodl/config.mk
deleted file mode 100644
index 76c382d..0000000
--- a/board/logodl/config.mk
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Linux-Kernel is expected to be at c000'8000, entry c000'8000
-#
-# we load ourself to c170'0000, the upper 1 MB of second bank
-#
-# download areas is c800'0000
-#
-
-#TEXT_BASE = 0
-
-# FIXME: armboot does only work correctly when being compiled
-# # for the addresses _after_ relocation to RAM!! Otherwhise the
-# # .bss segment is assumed in flash...
-#
-TEXT_BASE = 0x083E0000
diff --git a/board/logodl/flash.c b/board/logodl/flash.c
deleted file mode 100644
index 593943f..0000000
--- a/board/logodl/flash.c
+++ /dev/null
@@ -1,829 +0,0 @@
-/*
- * (C) 2000 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) 2003 August Hoeraendl, Logotronic GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef CONFIG_FLASH_16BIT
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x1000000
-#define MAIN_SECT_SIZE  0x20000		/* 2x64k = 128k per sector */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- *        has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define	FLASH_ID_MASK	0xFFFFFFFF
-#endif
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-#define write_word(in, de, da)   write_word_amd(in, de, da)
-static void flash_get_offsets(ulong base, flash_info_t *info);
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect(flash_info_t *info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-ulong flash_init(void)
-{
-    int i, j;
-    ulong size = 0;
-
-    for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
-    {
-	ulong flashbase = 0;
-	flash_info[i].flash_id =
-	  (FLASH_MAN_AMD & FLASH_VENDMASK) |
-	  (FLASH_AM640U & FLASH_TYPEMASK);
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-	switch (i)
-	{
-	   case 0:
-		flashbase = PHYS_FLASH_1;
-		break;
-	   case 1:
-		flashbase = PHYS_FLASH_2;
-		break;
-	   default:
-		panic("configured too many flash banks!\n");
-		break;
-	}
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
-	    flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
-	}
-	size += flash_info[i].size;
-    }
-
-    /* Protect monitor and environment sectors
-     */
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_SYS_FLASH_BASE,
-		  CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
-		  &flash_info[0]);
-
-    flash_protect(FLAG_PROTECT_SET,
-		  CONFIG_ENV_ADDR,
-		  CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-		  &flash_info[0]);
-
-    return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
-	    && (info->flash_id & FLASH_BTYPE)) {
-		int bootsect_size;	/* number of bytes/boot sector	*/
-		int sect_size;		/* number of bytes/regular sector */
-
-		bootsect_size = 0x00002000 * (sizeof(FPW)/2);
-		sect_size =     0x00010000 * (sizeof(FPW)/2);
-
-		/* set sector offsets for bottom boot block type	*/
-		for (i = 0; i < 8; ++i) {
-			info->start[i] = base + (i * bootsect_size);
-		}
-		for (i = 8; i < info->sector_count; i++) {
-			info->start[i] = base + ((i - 7) * sect_size);
-		}
-	}
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
-		 && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
-		int sect_size;		/* number of bytes/sector */
-
-		sect_size = 0x00010000 * (sizeof(FPW)/2);
-
-		/* set up sector start address table (uniform sector type) */
-		for( i = 0; i < info->sector_count; i++ )
-			info->start[i] = base + (i * sect_size);
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-	uchar *boottype;
-	uchar *bootletter;
-	uchar *fmt;
-	uchar botbootletter[] = "B";
-	uchar topbootletter[] = "T";
-	uchar botboottype[] = "bottom boot sector";
-	uchar topboottype[] = "top boot sector";
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	/* check for top or bottom boot, if it applies */
-	if (info->flash_id & FLASH_BTYPE) {
-		boottype = botboottype;
-		bootletter = botbootletter;
-	}
-	else {
-		boottype = topboottype;
-		bootletter = topbootletter;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM640U:
-		fmt = "29LV641D (64 Mbit, uniform sectors)\n";
-		break;
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-		fmt = "28F800C3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL800B:
-	case FLASH_INTEL800T:
-		fmt = "28F800B3%s (8 Mbit, %s)\n";
-		break;
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-		fmt = "28F160C3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL160B:
-	case FLASH_INTEL160T:
-		fmt = "28F160B3%s (16 Mbit, %s)\n";
-		break;
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-		fmt = "28F320C3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL320B:
-	case FLASH_INTEL320T:
-		fmt = "28F320B3%s (32 Mbit, %s)\n";
-		break;
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		fmt = "28F640C3%s (64 Mbit, %s)\n";
-		break;
-	case FLASH_INTEL640B:
-	case FLASH_INTEL640T:
-		fmt = "28F640B3%s (64 Mbit, %s)\n";
-		break;
-	default:
-		fmt = "Unknown Chip Type\n";
-		break;
-	}
-
-	printf (fmt, bootletter, boottype);
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	/* Write auto select command: read Manufacturer ID */
-
-	/* Write auto select command sequence and test FLASH answer */
-	addr[0x0555] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[0x02AA] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[0x0555] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	switch (addr[0] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case (uchar)INTEL_MANUFACT:
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch (addr[1]) {
-
-	case (FPW)AMD_ID_LV640U:	/* 29LV640 and 29LV641 have same ID */
-		info->flash_id += FLASH_AM640U;
-		info->sector_count = 128;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	case (FPW)INTEL_ID_28F800C3B:
-		info->flash_id += FLASH_28F800C3B;
-		info->sector_count = 23;
-		info->size = 0x00100000 * (sizeof(FPW)/2);
-		break;				/* => 1 or 2 MB		*/
-
-	case (FPW)INTEL_ID_28F800B3B:
-		info->flash_id += FLASH_INTEL800B;
-		info->sector_count = 23;
-		info->size = 0x00100000 * (sizeof(FPW)/2);
-		break;				/* => 1 or 2 MB		*/
-
-	case (FPW)INTEL_ID_28F160C3B:
-		info->flash_id += FLASH_28F160C3B;
-		info->sector_count = 39;
-		info->size = 0x00200000 * (sizeof(FPW)/2);
-		break;				/* => 2 or 4 MB		*/
-
-	case (FPW)INTEL_ID_28F160B3B:
-		info->flash_id += FLASH_INTEL160B;
-		info->sector_count = 39;
-		info->size = 0x00200000 * (sizeof(FPW)/2);
-		break;				/* => 2 or 4 MB		*/
-
-	case (FPW)INTEL_ID_28F320C3B:
-		info->flash_id += FLASH_28F320C3B;
-		info->sector_count = 71;
-		info->size = 0x00400000 * (sizeof(FPW)/2);
-		break;				/* => 4 or 8 MB		*/
-
-	case (FPW)INTEL_ID_28F320B3B:
-		info->flash_id += FLASH_INTEL320B;
-		info->sector_count = 71;
-		info->size = 0x00400000 * (sizeof(FPW)/2);
-		break;				/* => 4 or 8 MB		*/
-
-	case (FPW)INTEL_ID_28F640C3B:
-		info->flash_id += FLASH_28F640C3B;
-		info->sector_count = 135;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	case (FPW)INTEL_ID_28F640B3B:
-		info->flash_id += FLASH_INTEL640B;
-		info->sector_count = 135;
-		info->size = 0x00800000 * (sizeof(FPW)/2);
-		break;				/* => 8 or 16 MB	*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* => no or unknown flash */
-	}
-
-	flash_get_offsets((ulong)addr, info);
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void flash_sync_real_protect(flash_info_t *info)
-{
-    FPWV *addr = (FPWV *)(info->start[0]);
-    FPWV *sect;
-    int i;
-
-    switch (info->flash_id & FLASH_TYPEMASK) {
-    case FLASH_28F800C3B:
-    case FLASH_28F800C3T:
-    case FLASH_28F160C3B:
-    case FLASH_28F160C3T:
-    case FLASH_28F320C3B:
-    case FLASH_28F320C3T:
-    case FLASH_28F640C3B:
-    case FLASH_28F640C3T:
-	/* check for protected sectors */
-	*addr = (FPW)0x00900090;
-	for (i = 0; i < info->sector_count; i++) {
-	    /* read sector protection at sector address, (A7 .. A0) = 0x02.
-	     * D0 = 1 for each device if protected.
-	     * If at least one device is protected the sector is marked
-	     * protected, but mixed protected and  unprotected devices
-	     * within a sector should never happen.
-	     */
-	    sect = (FPWV *)(info->start[i]);
-	    info->protect[i] = (sect[2] & (FPW)(0x00010001)) ? 1 : 0;
-	}
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-	break;
-
-    case FLASH_AM640U:
-    default:
-	/* no hardware protect that we support */
-	break;
-    }
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	FPWV *addr;
-	int flag, prot, sect;
-	int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
-	ulong start, now, last;
-	int rcode = 0;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_INTEL800B:
-	case FLASH_INTEL160B:
-	case FLASH_INTEL320B:
-	case FLASH_INTEL640B:
-	case FLASH_28F800C3B:
-	case FLASH_28F160C3B:
-	case FLASH_28F320C3B:
-	case FLASH_28F640C3B:
-	case FLASH_AM640U:
-		break;
-	case FLASH_UNKNOWN:
-	default:
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer(0);
-	last  = start;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
-		if (info->protect[sect] != 0)	/* protected, skip it */
-			continue;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-		addr = (FPWV *)(info->start[sect]);
-		if (intel) {
-			*addr = (FPW)0x00500050; /* clear status register */
-			*addr = (FPW)0x00200020; /* erase setup */
-			*addr = (FPW)0x00D000D0; /* erase confirm */
-		}
-		else {
-			/* must be AMD style if not Intel */
-			FPWV *base;		/* first address in bank */
-
-			base = (FPWV *)(info->start[0]);
-			base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW)0x00550055;	/* unlock */
-			base[0x0555] = (FPW)0x00800080;	/* erase mode */
-			base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-			base[0x02AA] = (FPW)0x00550055;	/* unlock */
-			*addr = (FPW)0x00300030;	/* erase sector */
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts();
-
-		/* wait at least 50us for AMD, 80us for Intel.
-		 * Let's wait 1 ms.
-		 */
-		udelay (1000);
-
-		while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
-			if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf ("Timeout\n");
-
-				if (intel) {
-					/* suspend erase	*/
-					*addr = (FPW)0x00B000B0;
-				}
-
-				flash_reset(info);	/* reset to read mode */
-				rcode = 1;		/* failed */
-				break;
-			}
-
-			/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-				putc ('.');
-				last = now;
-			}
-		}
-
-		flash_reset(info);	/* reset to read mode	*/
-	}
-
-	printf (" done\n");
-	return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int bad_write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-    FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
-    int bytes;	  /* number of bytes to program in current word		*/
-    int left;	  /* number of bytes left to program			*/
-    int i, res;
-
-    for (left = cnt, res = 0;
-	 left > 0 && res == 0;
-	 addr += sizeof(data), left -= sizeof(data) - bytes) {
-
-	bytes = addr & (sizeof(data) - 1);
-	addr &= ~(sizeof(data) - 1);
-
-	/* combine source and destination data so can program
-	 * an entire word of 16 or 32 bits
-	 */
-	for (i = 0; i < sizeof(data); i++) {
-	    data <<= 8;
-	    if (i < bytes || i - bytes >= left )
-		data += *((uchar *)addr + i);
-	    else
-		data += *src++;
-	}
-
-	/* write one word to the flash */
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		res = write_word_amd(info, (FPWV *)addr, data);
-		break;
-	case FLASH_MAN_INTEL:
-		res = write_word_intel(info, (FPWV *)addr, data);
-		break;
-	default:
-		/* unknown flash type, error! */
-		printf ("missing or unknown FLASH type\n");
-		res = 1;	/* not really a timeout, but gives error */
-		break;
-	}
-    }
-
-    return (res);
-}
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src:	source of copy transaction
- * @param addr:	where to copy to
- * @param cnt:	number of bytes to copy
- *
- * @return	error code
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp;
-	FPW data;
-	int l;
-	int i, rc;
-
-	wp = (addr & ~1);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-		for (; i<2 && cnt>0; ++i) {
-			data = (data >> 8) | (*src++ << 8);
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<2; ++i, ++cp) {
-			data = (data >> 8) | (*(uchar *)cp << 8);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 2;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 2) {
-		/* data = *((vushort*)src); */
-		data = *((FPW*)src);
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += sizeof(FPW);
-		wp  += sizeof(FPW);
-		cnt -= sizeof(FPW);
-	}
-
-	if (cnt == 0) return ERR_OK;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
-		data = (data >> 8) | (*src++ << 8);
-		--cnt;
-	}
-	for (; i<2; ++i, ++cp) {
-		data = (data >> 8) | (*(uchar *)cp << 8);
-	}
-
-	return write_word(info, wp, data);
-}
-
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-    ulong start;
-    int flag;
-    int res = 0;	/* result, assume success	*/
-    FPWV *base;		/* first address in flash bank	*/
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest & data) != data) {
-	return (2);
-    }
-
-
-    base = (FPWV *)(info->start[0]);
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    base[0x0555] = (FPW)0x00AA00AA;	/* unlock */
-    base[0x02AA] = (FPW)0x00550055;	/* unlock */
-    base[0x0555] = (FPW)0x00A000A0;	/* selects program mode */
-
-    *dest = data;		/* start programming the data	*/
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    start = get_timer (0);
-
-    /* data polling for D7 */
-    while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    *dest = (FPW)0x00F000F0;	/* reset bank */
-	    res = 1;
-	}
-    }
-
-    return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
-{
-    ulong start;
-    int flag;
-    int res = 0;	/* result, assume success	*/
-
-    /* Check if Flash is (sufficiently) erased */
-    if ((*dest & data) != data) {
-	return (2);
-    }
-
-    /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
-
-    *dest = (FPW)0x00500050;	/* clear status register	*/
-    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
-    *dest = (FPW)0x00400040;	/* program setup		*/
-
-    *dest = data;		/* start programming the data	*/
-
-    /* re-enable interrupts if necessary */
-    if (flag)
-	enable_interrupts();
-
-    start = get_timer (0);
-
-    while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
-	if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-	    *dest = (FPW)0x00B000B0;	/* Suspend program	*/
-	    res = 1;
-	}
-    }
-
-    if (res == 0 && (*dest & (FPW)0x00100010))
-	res = 1;	/* write failed, time out error is close enough	*/
-
-    *dest = (FPW)0x00500050;	/* clear status register	*/
-    *dest = (FPW)0x00FF00FF;	/* make sure in read mode	*/
-
-    return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int flash_real_protect (flash_info_t * info, long sector, int prot)
-{
-	int rcode = 0;		/* assume success */
-	FPWV *addr;		/* address of sector */
-	FPW value;
-
-	addr = (FPWV *) (info->start[sector]);
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F800C3B:
-	case FLASH_28F800C3T:
-	case FLASH_28F160C3B:
-	case FLASH_28F160C3T:
-	case FLASH_28F320C3B:
-	case FLASH_28F320C3T:
-	case FLASH_28F640C3B:
-	case FLASH_28F640C3T:
-		flash_reset (info);		/* make sure in read mode */
-		*addr = (FPW) 0x00600060L;	/* lock command setup */
-		if (prot)
-			*addr = (FPW) 0x00010001L;	/* lock sector */
-		else
-			*addr = (FPW) 0x00D000D0L;	/* unlock sector */
-		flash_reset (info);		/* reset to read mode */
-
-		/* now see if it really is locked/unlocked as requested */
-		*addr = (FPW) 0x00900090;
-		/* read sector protection at sector address, (A7 .. A0) = 0x02.
-		 * D0 = 1 for each device if protected.
-		 * If at least one device is protected the sector is marked
-		 * protected, but return failure. Mixed protected and
-		 * unprotected devices within a sector should never happen.
-		 */
-		value = addr[2] & (FPW) 0x00010001;
-		if (value == 0)
-			info->protect[sector] = 0;
-		else if (value == (FPW) 0x00010001)
-			info->protect[sector] = 1;
-		else {
-			/* error, mixed protected and unprotected */
-			rcode = 1;
-			info->protect[sector] = 1;
-		}
-		if (info->protect[sector] != prot)
-			rcode = 1;	/* failed to protect/unprotect as requested */
-
-		/* reload all protection bits from hardware for now */
-		flash_sync_real_protect (info);
-		break;
-
-	case FLASH_AM640U:
-	default:
-		/* no hardware protect that we support */
-		info->protect[sector] = prot;
-		break;
-	}
-
-	return rcode;
-}
-#endif
diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c
deleted file mode 100644
index 2562ecc..0000000
--- a/board/logodl/logodl.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * (C) 2002 Kyle Harris <kharris@nexus-tech.net>, Nexus Technologies, Inc.
- * (C) 2002 Marius Groeger <mgroeger@sysgo.de>, Sysgo GmbH
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
-	/* memory and cpu-speed are setup before relocation */
-	/* so we do _nothing_ here */
-
-	gd->bd->bi_arch_number = MACH_TYPE_LOGODL;
-	gd->bd->bi_boot_params = 0x08000100;
-	gd->bd->bi_baudrate = CONFIG_BAUDRATE;
-
-	(*((volatile short*)0x14800000)) = 0xff; /* power on eth0 */
-	(*((volatile short*)0x14000000)) = 0xff; /* power on uart */
-
-	return 0;
-}
-
-
-/**
- * dram_init: - setup dynamic RAM
- *
- * @return: 0 in case of success
- */
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
-
-
-/**
- * logodl_set_led: - switch LEDs on or off
- *
- * @param led:   LED to switch (0,1)
- * @param state: switch on (1) or off (0)
- */
-
-void logodl_set_led(int led, int state)
-{
-	switch(led) {
-
-	case 0:
-		if (state==1) {
-			CONFIG_SYS_LED_A_CR = CONFIG_SYS_LED_A_BIT;
-		} else if (state==0) {
-			CONFIG_SYS_LED_A_SR = CONFIG_SYS_LED_A_BIT;
-		}
-		break;
-
-	case 1:
-		if (state==1) {
-			CONFIG_SYS_LED_B_CR = CONFIG_SYS_LED_B_BIT;
-		} else if (state==0) {
-			CONFIG_SYS_LED_B_SR = CONFIG_SYS_LED_B_BIT;
-		}
-		break;
-	}
-
-	return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The LOGOTRONIC does only have 2 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
-	if (status < -32) status = -1;  /* let things compatible */
-	/*
-	  switch(status) {
-	  case  1: logodl_set_led(0,1); break;
-	  case  5: logodl_set_led(1,1); break;
-	  case 15: logodl_set_led(2,1); break;
-	  }
-	*/
-	logodl_set_led(0, (status & 1)==1);
-	logodl_set_led(1, (status & 2)==2);
-
-	return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif
diff --git a/board/logodl/lowlevel_init.S b/board/logodl/lowlevel_init.S
deleted file mode 100644
index 9892430..0000000
--- a/board/logodl/lowlevel_init.S
+++ /dev/null
@@ -1,437 +0,0 @@
-/*
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
-
-/* wait for coprocessor write complete */
-   .macro CPWAIT reg
-   mrc  p15,0,\reg,c2,c0,0
-   mov  \reg,\reg
-   sub  pc,pc,#4
-   .endm
-
-_TEXT_BASE:
-	.word	TEXT_BASE
-
-
-/*
- *	Memory setup
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-    mov      r10, lr
-
-	/* Set up GPIO pins first ----------------------------------------- */
-
-	ldr		r0,	=GPSR0
-	ldr		r1,	=CONFIG_SYS_GPSR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR1
-	ldr		r1,	=CONFIG_SYS_GPSR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPSR2
-	ldr		r1,	=CONFIG_SYS_GPSR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR0
-	ldr		r1,	=CONFIG_SYS_GPCR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR1
-	ldr		r1,	=CONFIG_SYS_GPCR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPCR2
-	ldr		r1,	=CONFIG_SYS_GPCR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR0
-	ldr		r1,	=CONFIG_SYS_GPDR0_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR1
-	ldr		r1,	=CONFIG_SYS_GPDR1_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GPDR2
-	ldr		r1,	=CONFIG_SYS_GPDR2_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_L
-	ldr		r1,	=CONFIG_SYS_GAFR0_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR0_U
-	ldr		r1,	=CONFIG_SYS_GAFR0_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_L
-	ldr		r1,	=CONFIG_SYS_GAFR1_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR1_U
-	ldr		r1,	=CONFIG_SYS_GAFR1_U_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_L
-	ldr		r1,	=CONFIG_SYS_GAFR2_L_VAL
-	str		r1,   [r0]
-
-	ldr		r0,	=GAFR2_U
-	ldr		r1,	=CONFIG_SYS_GAFR2_U_VAL
-	str		r1,   [r0]
-
-	ldr	r0,	=PSSR		/* enable GPIO pins */
-	ldr		r1,	=CONFIG_SYS_PSSR_VAL
-	str		r1,   [r0]
-
-/*	ldr	r3,	=MSC1		/  low - bank 2 Lubbock Registers / SRAM */
-/*	ldr	r2,	=CONFIG_SYS_MSC1_VAL	/  high - bank 3 Ethernet Controller */
-/*	str	r2,	[r3]		/  need to set MSC1 before trying to write to the HEX LEDs */
-/*	ldr	r2,	[r3]		/  need to read it back to make sure the value latches (see MSC section of manual) */
-/* */
-/*	ldr	r1,	=LED_BLANK */
-/*	mov	r0,	#0xFF */
-/*	str	r0,	[r1]		/  turn on hex leds */
-/* */
-/*loop: */
-/* */
-/*   ldr	r0, =0xB0070001 */
-/*   ldr	r1, =_LED */
-/*   str	r0, [r1]		/  hex display */
-
-
-	/* ---------------------------------------------------------------- */
-	/* Enable memory interface                                          */
-	/*                                                                  */
-	/* The sequence below is based on the recommended init steps        */
-	/* detailed in the Intel PXA250 Operating Systems Developers Guide, */
-	/* Chapter 10.                                                      */
-	/* ---------------------------------------------------------------- */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 1: Wait for at least 200 microsedonds to allow internal     */
-	/*         clocks to settle. Only necessary after hard reset...     */
-	/*         FIXME: can be optimized later                            */
-	/* ---------------------------------------------------------------- */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty        */
-1:
-	ldr r2, [r3]
-	cmp r4, r2
-	bgt 1b
-
-mem_init:
-
-	ldr     r1,  =MEMC_BASE		/* get memory controller base addr. */
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2a: Initialize Asynchronous static memory controller        */
-	/* ---------------------------------------------------------------- */
-
-	/* MSC registers: timing, bus width, mem type                       */
-
-	/* MSC0: nCS(0,1)                                                   */
-	ldr     r2,   =CONFIG_SYS_MSC0_VAL
-	str     r2,   [r1, #MSC0_OFFSET]
-	ldr     r2,   [r1, #MSC0_OFFSET]	/* read back to ensure      */
-						/* that data latches        */
-	/* MSC1: nCS(2,3)                                                   */
-	ldr     r2,  =CONFIG_SYS_MSC1_VAL
-	str     r2,  [r1, #MSC1_OFFSET]
-	ldr     r2,  [r1, #MSC1_OFFSET]
-
-	/* MSC2: nCS(4,5)                                                   */
-	ldr     r2,  =CONFIG_SYS_MSC2_VAL
-	str     r2,  [r1, #MSC2_OFFSET]
-	ldr     r2,  [r1, #MSC2_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2b: Initialize Card Interface                               */
-	/* ---------------------------------------------------------------- */
-
-	/* MECR: Memory Expansion Card Register                             */
-	ldr     r2,  =CONFIG_SYS_MECR_VAL
-	str     r2,  [r1, #MECR_OFFSET]
-	ldr	r2,	[r1, #MECR_OFFSET]
-
-	/* MCMEM0: Card Interface slot 0 timing                             */
-	ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
-	str     r2,  [r1, #MCMEM0_OFFSET]
-	ldr	r2,	[r1, #MCMEM0_OFFSET]
-
-	/* MCMEM1: Card Interface slot 1 timing                             */
-	ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
-	str     r2,  [r1, #MCMEM1_OFFSET]
-	ldr	r2,	[r1, #MCMEM1_OFFSET]
-
-	/* MCATT0: Card Interface Attribute Space Timing, slot 0            */
-	ldr     r2,  =CONFIG_SYS_MCATT0_VAL
-	str     r2,  [r1, #MCATT0_OFFSET]
-	ldr	r2,	[r1, #MCATT0_OFFSET]
-
-	/* MCATT1: Card Interface Attribute Space Timing, slot 1            */
-	ldr     r2,  =CONFIG_SYS_MCATT1_VAL
-	str     r2,  [r1, #MCATT1_OFFSET]
-	ldr	r2,	[r1, #MCATT1_OFFSET]
-
-	/* MCIO0: Card Interface I/O Space Timing, slot 0                   */
-	ldr     r2,  =CONFIG_SYS_MCIO0_VAL
-	str     r2,  [r1, #MCIO0_OFFSET]
-	ldr	r2,	[r1, #MCIO0_OFFSET]
-
-	/* MCIO1: Card Interface I/O Space Timing, slot 1                   */
-	ldr     r2,  =CONFIG_SYS_MCIO1_VAL
-	str     r2,  [r1, #MCIO1_OFFSET]
-	ldr	r2,	[r1, #MCIO1_OFFSET]
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2c: Write FLYCNFG  FIXME: what's that???                    */
-	/* ---------------------------------------------------------------- */
-
-	/* test if we run from flash or RAM - RAM/BDI: don't setup RAM      */
-	adr	r3, mem_init		/* r0 <- current position of code   */
-	ldr	r2, =mem_init
-	cmp	r3, r2			/* skip init if in place            */
-	beq	initirqs
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 2d: Initialize Timing for Sync Memory (SDCLK0)              */
-	/* ---------------------------------------------------------------- */
-
-	/* Before accessing MDREFR we need a valid DRI field, so we set     */
-	/* this to power on defaults + DRI field.                           */
-
-	ldr	r3,	=CONFIG_SYS_MDREFR_VAL
-	ldr	r2,	=0xFFF
-	and	r3,	r3, r2
-	ldr	r4,	=0x03ca4000
-	orr	r4,	r4,  r3
-
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
-	ldr     r4,	[r1, #MDREFR_OFFSET]
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
-	/* ---------------------------------------------------------------- */
-
-	/* Initialize SXCNFG register. Assert the enable bits               */
-
-	/* Write SXMRS to cause an MRS command to all enabled banks of      */
-	/* synchronous static memory. Note that SXLCR need not be written   */
-	/* at this time.                                                    */
-
-	/* FIXME: we use async mode for now                                 */
-
-
-	/* ---------------------------------------------------------------- */
-	/* Step 4: Initialize SDRAM                                         */
-	/* ---------------------------------------------------------------- */
-
-	/* Step 4a: assert MDREFR:K?RUN and configure                       */
-	/*          MDREFR:K1DB2 and MDREFR:K2DB2 as desired.               */
-
-	ldr	r4,	=CONFIG_SYS_MDREFR_VAL
-	str	r4,	[r1, #MDREFR_OFFSET]	/* write back MDREFR        */
-	ldr	r4,	[r1, #MDREFR_OFFSET]
-
-	/* Step 4b: de-assert MDREFR:SLFRSH.                                */
-
-	bic	r4,	r4, #(MDREFR_SLFRSH)
-
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,     [r1, #MDREFR_OFFSET]
-
-
-	/* Step 4c: assert MDREFR:E1PIN and E0PIO                           */
-
-	orr	r4,	r4,	#(MDREFR_E1PIN|MDREFR_E0PIN)
-
-	str     r4,     [r1, #MDREFR_OFFSET]    /* write back MDREFR        */
-	ldr     r4,     [r1, #MDREFR_OFFSET]
-
-
-	/* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to  */
-	/*          configure but not enable each SDRAM partition pair.     */
-
-	ldr	r4,	=CONFIG_SYS_MDCNFG_VAL
-	bic	r4,	r4,	#(MDCNFG_DE0|MDCNFG_DE1)
-
-	str     r4,     [r1, #MDCNFG_OFFSET]	/* write back MDCNFG        */
-	ldr     r4,     [r1, #MDCNFG_OFFSET]
-
-
-	/* Step 4e: Wait for the clock to the SDRAMs to stabilize,          */
-	/*          100..200 µsec.                                          */
-
-	ldr r3, =OSCR			/* reset the OS Timer Count to zero */
-	mov r2, #0
-	str r2, [r3]
-	ldr r4, =0x300			/* really 0x2E1 is about 200usec,   */
-					/* so 0x300 should be plenty        */
-1:
-	ldr r2, [r3]
-	cmp r4, r2
-	bgt 1b
-
-
-	/* Step 4f: Trigger a number (usually 8) refresh cycles by          */
-	/*          attempting non-burst read or write accesses to disabled */
-	/*          SDRAM, as commonly specified in the power up sequence   */
-	/*          documented in SDRAM data sheets. The address(es) used   */
-	/*          for this purpose must not be cacheable.                 */
-
-	/*          There should 9 writes, since the first write doesn't    */
-	/*          trigger a refresh cycle on PXA250. See Intel PXA250 and */
-	/*          PXA210 Processors Specification Update,                 */
-	/*          Jan 2003, Errata #116, page 30.                         */
-
-
-	ldr	r3,	=CONFIG_SYS_DRAM_BASE
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-	str	r2, [r3]
-
-	/* Step 4g: Write MDCNFG with enable bits asserted                  */
-	/*          (MDCNFG:DEx set to 1).                                  */
-
-	ldr	r3, [r1, #MDCNFG_OFFSET]
-	orr	r3,	r3,	#(MDCNFG_DE0|MDCNFG_DE1)
-	str	r3, [r1, #MDCNFG_OFFSET]
-
-	/* Step 4h: Write MDMRS.                                            */
-
-	ldr     r2,  =CONFIG_SYS_MDMRS_VAL
-	str     r2,  [r1, #MDMRS_OFFSET]
-
-
-	/* We are finished with Intel's memory controller initialisation    */
-
-	/* ---------------------------------------------------------------- */
-	/* Disable (mask) all interrupts at interrupt controller            */
-	/* ---------------------------------------------------------------- */
-
-initirqs:
-
-	mov     r1, #0		/* clear int. level register (IRQ, not FIQ) */
-	ldr     r2,  =ICLR
-	str     r1,  [r2]
-
-	ldr     r2,  =ICMR	/* mask all interrupts at the controller    */
-	str     r1,  [r2]
-
-
-	/* ---------------------------------------------------------------- */
-	/* Clock initialisation                                             */
-	/* ---------------------------------------------------------------- */
-
-initclks:
-
-	/* Disable the peripheral clocks, and set the core clock frequency  */
-	/* (hard-coding at 398.12MHz for now).                              */
-
-	/* Turn Off ALL on-chip peripheral clocks for re-configuration      */
-	/* Note: See label 'ENABLECLKS' for the re-enabling                 */
-	ldr     r1,  =CKEN
-	mov     r2,  #0
-	str     r2,  [r1]
-
-
-	/* default value in case no valid rotary switch setting is found    */
-	ldr     r2, =(CCCR_L27|CCCR_M2|CCCR_N10)  /* DEFAULT: {200/200/100} */
-
-	/* ... and write the core clock config register                     */
-	ldr     r1,  =CCCR
-	str     r2,  [r1]
-
-	/* enable the 32Khz oscillator for RTC and PowerManager             */
-/*
-	ldr     r1,  =OSCC
-	mov     r2,  #OSCC_OON
-	str     r2,  [r1]
-*/
-	/* NOTE:  spin here until OSCC.OOK get set, meaning the PLL         */
-	/* has settled.                                                     */
-60:
-	ldr     r2, [r1]
-	ands    r2, r2, #1
-	beq     60b
-
-	/* ---------------------------------------------------------------- */
-	/*                                                                  */
-	/* ---------------------------------------------------------------- */
-
-	/* Save SDRAM size                                                  */
-	ldr	r1, =DRAM_SIZE
-	str	r8, [r1]
-
-	/* Interrupt init: Mask all interrupts                              */
-	ldr	r0, =ICMR			/* enable no sources        */
-	mov	r1, #0
-	str	r1, [r0]
-
-	/* FIXME */
-
-#ifndef DEBUG
-	/*Disable software and data breakpoints */
-	mov	r0,#0
-	mcr	p15,0,r0,c14,c8,0  /* ibcr0 */
-	mcr	p15,0,r0,c14,c9,0  /* ibcr1 */
-	mcr	p15,0,r0,c14,c4,0  /* dbcon */
-
-	/*Enable all debug functionality */
-	mov	r0,#0x80000000
-	mcr	p14,0,r0,c10,c0,0  /* dcsr */
-#endif
-
-	/* ---------------------------------------------------------------- */
-	/* End lowlevel_init                                                     */
-	/* ---------------------------------------------------------------- */
-
-endlowlevel_init:
-
-    mov     pc, lr