mpc5200: digsy_mtc: add support for writing 'appreg' value

Up to now only reading 'appreg' value was implemented in the
digsyMTC special 'mtc appreg' command. Extend the command to
support writing appreg value, too.

Signed-off-by: Werner Pfister <Pfister_Werner@intercontrol.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>

1 files changed, 40 insertions, 6 deletions

diff --git a/board/digsy_mtc/cmd_mtc.c b/board/digsy_mtc/cmd_mtc.c
index ba0c367..fffcee9 100644
--- a/board/digsy_mtc/cmd_mtc.c
+++ b/board/digsy_mtc/cmd_mtc.c
@@ -31,6 +31,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static uchar user_out;
+
 static const char *led_names[] = {
 	"diag",
 	"can1",
@@ -112,6 +114,8 @@ static int do_mtc_led(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	else
 		pcmd.cmd_val2 = 0;
 
+	pcmd.user_out = user_out;
+
 	mtc_calculate_checksum(&pcmd);
 	err = msp430_xfer(&pcmd, &prx);
 
@@ -128,6 +132,7 @@ static int do_mtc_key(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	memset(&prx, 0, sizeof(prx));
 
 	pcmd.cmd = CMD_GET_VIM;
+	pcmd.user_out = user_out;
 
 	mtc_calculate_checksum(&pcmd);
 	err = msp430_xfer(&pcmd, &prx);
@@ -160,6 +165,7 @@ static int do_mtc_digout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 
 	pcmd.cmd = CMD_GET_VIM;
 	pcmd.user_out = channel_mask;
+	user_out = channel_mask;
 
 	mtc_calculate_checksum(&pcmd);
 	err = msp430_xfer(&pcmd, &prx);
@@ -187,6 +193,7 @@ static int do_mtc_digin(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 	memset(&prx, 0, sizeof(prx));
 
 	pcmd.cmd = CMD_GET_VIM;
+	pcmd.user_out = user_out;
 
 	mtc_calculate_checksum(&pcmd);
 	err = msp430_xfer(&pcmd, &prx);
@@ -205,6 +212,7 @@ static int do_mtc_appreg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 	rx_msp_cmd prx;
 	int err;
 	char buf[5];
+	uchar appreg;
 
 	/* read appreg */
 	memset(&pcmd, 0, sizeof(pcmd));
@@ -214,13 +222,34 @@ static int do_mtc_appreg(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
 	pcmd.cmd_val0 = 5;	/* max. Count */
 	pcmd.cmd_val1 = 5;	/* max. Time */
 	pcmd.cmd_val2 = 0;	/* =0 means read appreg */
+	pcmd.user_out = user_out;
 
 	mtc_calculate_checksum(&pcmd);
 	err = msp430_xfer(&pcmd, &prx);
 
+	/* on success decide between read or write */
 	if (!err) {
-		sprintf(buf, "%d", prx.ack2);
-		setenv("appreg", buf);
+		if (argc == 2) {
+			appreg = simple_strtol(argv[1], NULL, 10);
+			if (appreg == 0) {
+				printf("mtc appreg: invalid parameter - "
+				       "must be between 1 and 255\n");
+				return -1;
+			}
+			memset(&pcmd, 0, sizeof(pcmd));
+			pcmd.cmd = CMD_WD_PARA;
+			pcmd.cmd_val0 = prx.ack3; /* max. Count */
+			pcmd.cmd_val1 = prx.ack0; /* max. Time */
+			pcmd.cmd_val2 = appreg;	  /* !=0 means write appreg */
+			pcmd.user_out = user_out;
+			memset(&prx, 0, sizeof(prx));
+
+			mtc_calculate_checksum(&pcmd);
+			err = msp430_xfer(&pcmd, &prx);
+		} else {
+			sprintf(buf, "%d", prx.ack2);
+			setenv("appreg", buf);
+		}
 	}
 
 	return err;
@@ -236,6 +265,7 @@ static int do_mtc_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const arg
 	memset(&prx, 0, sizeof(prx));
 
 	pcmd.cmd = CMD_FW_VERSION;
+	pcmd.user_out = user_out;
 
 	mtc_calculate_checksum(&pcmd);
 	err = msp430_xfer(&pcmd, &prx);
@@ -259,6 +289,7 @@ static int do_mtc_state(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
 
 	pcmd.cmd = CMD_WD_WDSTATE;
 	pcmd.cmd_val2 = 1;
+	pcmd.user_out = user_out;
 
 	mtc_calculate_checksum(&pcmd);
 	err = msp430_xfer(&pcmd, &prx);
@@ -288,8 +319,10 @@ cmd_tbl_t cmd_mtc_sub[] = {
 	"returns state of user key", ""),
 	U_BOOT_CMD_MKENT(version, 0, 1, do_mtc_version,
 	"returns firmware version of supervisor uC", ""),
-	U_BOOT_CMD_MKENT(appreg, 0, 1, do_mtc_appreg,
-	"reads appreg value and stores in environment variable 'appreg'", ""),
+	U_BOOT_CMD_MKENT(appreg, 1, 1, do_mtc_appreg,
+	"reads or writes appreg value and stores in environment "
+	"variable 'appreg'",
+	"[value] - value (1 - 255) to write to appreg"),
 	U_BOOT_CMD_MKENT(digin, 1, 1, do_mtc_digin,
 	"returns state of digital input",
 	"<channel_num> - get state of digital input (1 or 2)\n"),
@@ -342,8 +375,9 @@ U_BOOT_CMD(mtc, 5, 1, cmd_mtc,
 	"  [blink]: blink interval in 100ms steps (1 - 10; 0 = static)\n"
 	"key - returns state of user key\n"
 	"version - returns firmware version of supervisor uC\n"
-	"appreg - reads appreg value and stores in environment variable"
-	" 'appreg'\n"
+	"appreg [value] - reads (in environment variable 'appreg') or writes"
+	" appreg value\n"
+	"  [value]: value (1 - 255) to write to appreg\n"
 	"digin [channel] - returns state of digital input (1 or 2)\n"
 	"digout <on|off> <on|off> - sets state of two digital outputs\n"
 	"state - displays state\n"