summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorFabio Estevam <fabio.estevam@freescale.com>2013-01-09 05:10:16 +0000
committerStefano Babic <sbabic@denx.de>2013-01-09 19:22:24 +0100
commit17c5ef20073c49ae1a10150b4194b25b6f1154fe (patch)
tree6c8b360c1db685139cb34270eb9c24ebb2c23d3f /board
parent2b16e51c2ff1073592a3a3f52a6725bdd7b11f81 (diff)
downloadu-boot-imx-17c5ef20073c49ae1a10150b4194b25b6f1154fe.zip
u-boot-imx-17c5ef20073c49ae1a10150b4194b25b6f1154fe.tar.gz
u-boot-imx-17c5ef20073c49ae1a10150b4194b25b6f1154fe.tar.bz2
mx53loco: Add support for SEIKO 4.3'' WVGA panel
Add support for the Seiko 4.3'' WVGA panel on mx53loco. By default, the CLAA WVGA panel is selected. In order to support the Seiko panel, the enviroment variable 'panel' must be set to 'seiko'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/mx53loco/mx53loco.c2
-rw-r--r--board/freescale/mx53loco/mx53loco_video.c38
2 files changed, 35 insertions, 5 deletions
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 60cd4f0..8f39c38 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -503,8 +503,6 @@ int board_init(void)
mxc_set_sata_internal_clock();
setup_iomux_i2c();
- lcd_enable();
-
return 0;
}
diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
index 69991e8..a4d5a6a 100644
--- a/board/freescale/mx53loco/mx53loco_video.c
+++ b/board/freescale/mx53loco/mx53loco_video.c
@@ -46,6 +46,21 @@ static struct fb_videomode const claa_wvga = {
.vmode = FB_VMODE_NONINTERLACED
};
+static struct fb_videomode const seiko_wvga = {
+ .name = "Seiko-43WVF1G",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 29851, /* picosecond (33.5 MHz) */
+ .left_margin = 89,
+ .right_margin = 164,
+ .upper_margin = 23,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = 0,
+};
+
void setup_iomux_lcd(void)
{
mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
@@ -86,9 +101,26 @@ void setup_iomux_lcd(void)
gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
}
-void lcd_enable(void)
+int board_video_skip(void)
{
- int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
+ int ret;
+ char const *e = getenv("panel");
+
+ if (e) {
+ if (strcmp(e, "seiko") == 0) {
+ ret = ipuv3_fb_init(&seiko_wvga, 0, IPU_PIX_FMT_RGB24);
+ if (ret)
+ printf("Seiko cannot be configured: %d\n", ret);
+ return ret;
+ }
+ }
+
+ /*
+ * 'panel' env variable not found or has different value than 'seiko'
+ * Defaulting to claa lcd.
+ */
+ ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
if (ret)
- printf("LCD cannot be configured: %d\n", ret);
+ printf("CLAA cannot be configured: %d\n", ret);
+ return ret;
}