am33xx: Remove board/ti/am335x/evm.c

The intention has always been (and boards are to support) an i2c EEPROM
that will identify what hardware they are, allowing a single binary to
support multiple boards.  As such, remove the 'evm.c' file as there is
nothing EVM centric in it currently, only SoC peripheral configuration.

Signed-off-by: Tom Rini <trini@ti.com>

2 files changed, 1 insertions, 200 deletions

diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index d58b185..e3609bc 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -18,7 +18,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= evm.o mux.o
+COBJS	:= mux.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c
deleted file mode 100644
index b7eee80..0000000
--- a/board/ti/am335x/evm.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * evm.c
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <common.h>
-#include <errno.h>
-#include <asm/io.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/common_def.h>
-#include <i2c.h>
-#include <miiphy.h>
-#include <cpsw.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_RESET		(0x1 << 1)
-#define UART_CLK_RUNNING_MASK	0x1
-#define UART_SMART_IDLE_EN	(0x1 << 0x3)
-
-/* MII mode defines */
-#define MII_MODE_ENABLE		0x0
-#define RGMII_MODE_ENABLE	0xA
-
-struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-/*
- * I2C Address of on-board EEPROM
- */
-#define I2C_BASE_BOARD_ADDR	0x50
-
-#define NO_OF_MAC_ADDR          3
-#define ETH_ALEN		6
-
-#define NAME_LEN	8
-
-struct am335x_baseboard_id {
-	unsigned int  magic;
-	char name[NAME_LEN];
-	char version[4];
-	char serial[12];
-	char config[32];
-	char mac_addr[NO_OF_MAC_ADDR][ETH_ALEN];
-};
-
-static struct am335x_baseboard_id header;
-
-static inline int board_is_bone(void)
-{
-	return !strncmp(header.name, "A335BONE", NAME_LEN);
-}
-
-/*
- * Read header information from EEPROM into global structure.
- */
-int read_eeprom(void)
-{
-	/* Check if baseboard eeprom is available */
-	if (i2c_probe(I2C_BASE_BOARD_ADDR)) {
-		printf("Could not probe the EEPROM; something fundamentally "
-			"wrong on the I2C bus.\n");
-		return -ENODEV;
-	}
-
-	/* read the eeprom using i2c */
-	if (i2c_read(I2C_BASE_BOARD_ADDR, 0, 2, (uchar *)&header,
-							sizeof(header))) {
-		printf("Could not read the EEPROM; something fundamentally"
-			" wrong on the I2C bus.\n");
-		return -EIO;
-	}
-
-	if (header.magic != 0xEE3355AA) {
-		/*
-		 * read the eeprom using i2c again,
-		 * but use only a 1 byte address
-		 */
-		if (i2c_read(I2C_BASE_BOARD_ADDR, 0, 1, (uchar *)&header,
-							sizeof(header))) {
-			printf("Could not read the EEPROM; something "
-				"fundamentally wrong on the I2C bus.\n");
-			return -EIO;
-		}
-
-		if (header.magic != 0xEE3355AA) {
-			printf("Incorrect magic number in EEPROM\n");
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Basic board specific setup
- */
-int board_init(void)
-{
-	enable_uart0_pin_mux();
-
-	enable_i2c0_pin_mux();
-	enable_i2c1_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	if (read_eeprom() < 0)
-		printf("Could not get board ID.\n");
-
-	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_id		= 0,
-	},
-	{
-		.slave_reg_ofs	= 0x308,
-		.sliver_reg_ofs	= 0xdc0,
-		.phy_id		= 1,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= AM335X_CPSW_MDIO_BASE,
-	.cpsw_base		= AM335X_CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
-		debug("<ethaddr> not set. Reading from E-fuse\n");
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-		if (is_valid_ether_addr(mac_addr))
-			eth_setenv_enetaddr("ethaddr", mac_addr);
-		else
-			return -1;
-	}
-
-	if (board_is_bone()) {
-		enable_mii1_pin_mux();
-		writel(MII_MODE_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
-				PHY_INTERFACE_MODE_MII;
-	} else {
-		enable_rgmii1_pin_mux();
-		writel(RGMII_MODE_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
-				PHY_INTERFACE_MODE_RGMII;
-	}
-
-	return cpsw_register(&cpsw_data);
-}
-#endif