* Patches by David Müller, 12 Jun 2003:

  - rewrite of the S3C24X0 register definitions stuff
  - "driver" for the built-in S3C24X0 RTC

* Patches by Yuli Barcohen, 12 Jun 2003:
  - Add MII support and Ethernet PHY initialization for MPC8260ADS board
  - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
    configuration word supplied by FPGA on some MPC8260ADS boards

* Patch by Pantelis Antoniou, 10 Jun 2003:
  Unify status LED interface

11 files changed, 314 insertions, 142 deletions

diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index 2200a24..d0ee921 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -9,6 +9,10 @@
  * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com
  * Added support for the 16M dram simm on the 8260ads boards
  *
+ * (C) Copyright 2003 Arabella Software Ltd.
+ * Yuli Barcohen <yuli@arabellasw.com>
+ * Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index aa2ba6f..503654e 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -45,7 +45,11 @@ extern int  gunzip (void *, int, unsigned char *, int *);
 extern int mem_test(unsigned long start, unsigned long ramsize, int quiet);
 
 #define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
 #define IMAGE_SIZE 0x80000
+#elif defined(CONFIG_VCMA9)
+#define IMAGE_SIZE 0x40000		/* ugly, but it works for now */
+#endif
 
 extern flash_info_t flash_info[];	/* info for FLASH chips */
 
diff --git a/board/mpl/vcma9/config.mk b/board/mpl/vcma9/config.mk
index 19ef187..95d69cc 100644
--- a/board/mpl/vcma9/config.mk
+++ b/board/mpl/vcma9/config.mk
@@ -15,10 +15,10 @@
 # Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
 # optionally with a ramdisk at 3080'0000
 #
-# we load ourself to 33F0'0000
+# we load ourself to 33F8'0000
 #
 # download area is 3300'0000
 #
 
 
-TEXT_BASE = 0x33F00000
+TEXT_BASE = 0x33F80000
diff --git a/board/mpl/vcma9/memsetup.S b/board/mpl/vcma9/memsetup.S
index 80721cd..557e554 100644
--- a/board/mpl/vcma9/memsetup.S
+++ b/board/mpl/vcma9/memsetup.S
@@ -54,8 +54,10 @@
 
 /* BANK0CON */
 #define B0_Tacs		 	0x0	/*  0clk */
-#define B0_Tcos		 	0x0	/*  0clk */
-#define B0_Tacc		 	0x5	/*  8clk */
+#define B0_Tcos		 	0x1	/*  1clk */
+/*#define B0_Tcos		0x0	  0clk */
+#define B0_Tacc		 	0x7	/*  14clk */
+/*#define B0_Tacc		0x5	  8clk */
 #define B0_Tcoh		 	0x0	/*  0clk */
 #define B0_Tah		 	0x0	/*  0clk */
 #define B0_Tacp		 	0x0     /* page mode is not used */
@@ -63,8 +65,10 @@
 
 /* BANK1CON */
 #define B1_Tacs		 	0x0	/*  0clk */
-#define B1_Tcos		 	0x0	/*  0clk */
-#define B1_Tacc		 	0x5	/*  8clk */
+#define B1_Tcos		 	0x1	/*  1clk */
+/*#define B1_Tcos		0x0	  0clk */
+#define B1_Tacc			0x7	/*  14clk */
+/*#define B1_Tacc		0x5	  8clk */
 #define B1_Tcoh		 	0x0	/*  0clk */
 #define B1_Tah		 	0x0	/*  0clk */
 #define B1_Tacp		 	0x0     /* page mode is not used */
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 4743e6b..b051bfe 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -72,41 +72,46 @@ static inline void delay(unsigned long loops)
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
-	rLOCKTIME = 0xFFFFFF;
+	clk_power->LOCKTIME = 0xFFFFFF;
 
 	/* configure MPLL */
-	rMPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
 
 	/* some delay between MPLL and UPLL */
 	delay (4000);
 
 	/* configure UPLL */
-	rUPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
 
 	/* some delay between MPLL and UPLL */
 	delay (8000);
 
 	/* set up the I/O ports */
-	rGPACON = 0x007FFFFF;
-	rGPBCON = 0x002AAAAA;
-	rGPBUP = 0x000002BF;
-	rGPCCON = 0xAAAAAAAA;
-	rGPCUP = 0x0000FFFF;
-	rGPDCON = 0xAAAAAAAA;
-	rGPDUP = 0x0000FFFF;
-	rGPECON = 0xAAAAAAAA;
-	rGPEUP = 0x000037F7;
-	rGPFCON = 0x00000000;
-	rGPFUP = 0x00000000;
-	rGPGCON = 0xFFEAFF5A;
-	rGPGUP = 0x0000F0DC;
-	rGPHCON = 0x0028AAAA;
-	rGPHUP = 0x00000656;
+	gpio->GPACON = 0x007FFFFF;
+	gpio->GPBCON = 0x002AAAAA;
+	gpio->GPBUP = 0x000002BF;
+	gpio->GPCCON = 0xAAAAAAAA;
+	gpio->GPCUP = 0x0000FFFF;
+	gpio->GPDCON = 0xAAAAAAAA;
+	gpio->GPDUP = 0x0000FFFF;
+	gpio->GPECON = 0xAAAAAAAA;
+	gpio->GPEUP = 0x000037F7;
+	gpio->GPFCON = 0x00000000;
+	gpio->GPFUP = 0x00000000;
+	gpio->GPGCON = 0xFFEAFF5A;
+	gpio->GPGUP = 0x0000F0DC;
+	gpio->GPHCON = 0x0028AAAA;
+	gpio->GPHUP = 0x00000656;
 
 	/* setup correct IRQ modes for NIC */
-	rEXTINT2 = (rEXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */
+	gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */
+
+	/* select USB port 2 to be host or device (fix to host for now) */
+	gpio->MISCCR |= 0x08;
 
 	/* init serial */
 	gd->baudrate = CONFIG_BAUDRATE;
@@ -136,6 +141,50 @@ int dram_init(void)
 }
 
 /*
+ * NAND flash initialization.
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+extern void
+nand_probe(ulong physadr);
+
+
+static inline void NF_Reset(void)
+{
+    int i;
+
+    NF_SetCE(NFCE_LOW);
+    NF_Cmd(0xFF);		/* reset command */
+    for(i = 0; i < 10; i++);	/* tWB = 100ns. */
+    NF_WaitRB();		/* wait 200~500us; */
+    NF_SetCE(NFCE_HIGH);
+}
+
+
+static inline void NF_Init(void)
+{
+#define TACLS   0
+#define TWRPH0  3
+#define TWRPH1  0
+    NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
+    //nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0);
+    // 1  1    1     1,   1      xxx,  r xxx,   r xxx
+    // En 512B 4step ECCR nFCE=H tACLS   tWRPH0   tWRPH1
+
+    NF_Reset();
+}
+
+void
+nand_init(void)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	NF_Init();
+	printf("NAND flash probing at 0x%.8lX\n", (ulong)nand);
+	nand_probe((ulong)nand);
+}
+#endif
+
+/*
  * Get some Board/PLD Info
  */
 
@@ -195,12 +244,12 @@ int checkboard(void)
 			puts ("### No HW ID - assuming VCMA9");
 		} else {
 			b->serial_name[5] = 0;
-			printf ("%s-%d Rev %c SN: %s", b->serial_name, Get_Board_Config(),
+			printf ("%s-%d PCB Rev %c SN: %s", b->serial_name, Get_Board_Config(),
 					Get_Board_PCB(), &b->serial_name[6]);
 		}
 	} else {
 		s[5] = 0;
-		printf ("%s-%d Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(),
+		printf ("%s-%d PCB Rev %c SN: %s", s, Get_Board_Config(), Get_Board_PCB(),
 				&s[6]);
 	}
 	printf("\n");
@@ -211,7 +260,7 @@ int checkboard(void)
 
 void print_vcma9_rev(void)
 {
-	printf("Board: VCMA9-%d Rev: %c (PLD Ver: %d, Rev: %d)\n",
+	printf("Board: VCMA9-%d PCB Rev: %c (PLD Ver: %d, Rev: %d)\n",
 		Get_Board_Config(), Get_Board_PCB(),
 		Get_PLD_Version(), Get_PLD_Revision());
 }
@@ -245,5 +294,3 @@ void print_vcma9_info(void)
 {
     print_vcma9_rev();
 }
-
-
diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h
index bc0e3a4..4299d4e 100644
--- a/board/mpl/vcma9/vcma9.h
+++ b/board/mpl/vcma9/vcma9.h
@@ -25,11 +25,97 @@
  * Global routines used for VCMA9
  *****************************************************************************/
 
+#include <s3c2410.h>
 
 extern int  mem_test(unsigned long start, unsigned long ramsize,int mode);
 
 void print_vcma9_info(void);
 
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+typedef enum {
+	NFCE_LOW,
+	NFCE_HIGH
+} NFCE_STATE;
+
+static inline void NF_Conf(u16 conf)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	nand->NFCONF = conf;
+}
+
+static inline void NF_Cmd(u8 cmd)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	nand->NFCMD = cmd;
+}
+
+static inline void NF_CmdW(u8 cmd)
+{
+	NF_Cmd(cmd);
+	udelay(1);
+}
+
+static inline void NF_Addr(u8 addr)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	nand->NFADDR = addr;
+}
+
+static inline void NF_SetCE(NFCE_STATE s)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	switch (s) {
+		case NFCE_LOW:
+			nand->NFCONF &= ~(1<<11);
+			break;
+
+		case NFCE_HIGH:
+			nand->NFCONF |= (1<<11);
+			break;
+	}
+}
+
+static inline void NF_WaitRB(void)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	while (!(nand->NFSTAT & (1<<0)));
+}
+
+static inline void NF_Write(u8 data)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	nand->NFDATA = data;
+}
+
+static inline u8 NF_Read(void)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	return(nand->NFDATA);
+}
+
+static inline void NF_Init_ECC(void)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	nand->NFCONF |= (1<<12);
+}
+
+static inline u32 NF_Read_ECC(void)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	return(nand->NFECC);
+}
+
+#endif
+
 
 #define PLD_BASE_ADDRESS		0x2C000100
 #define PLD_ID_REG			(PLD_BASE_ADDRESS + 0)
@@ -39,5 +125,3 @@ void print_vcma9_info(void);
 #define PLD_GPCD_REG			(PLD_BASE_ADDRESS + 4)
 #define PLD_BOARD_REG			(PLD_BASE_ADDRESS + 5)
 
-
-
diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c
index 2b61b2d..2d6be31 100644
--- a/board/smdk2400/smdk2400.c
+++ b/board/smdk2400/smdk2400.c
@@ -46,33 +46,35 @@ extern int do_mdm_init; /* defined in common/main.c */
 int board_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
 	/* memory and cpu-speed are setup before relocation */
 	/* change the clock to be 50 MHz 1:1:1 */
-	rMPLLCON = 0x5c042;
-	rCLKDIVN = 0;
+	clk_power->MPLLCON = 0x5c042;
+	clk_power->CLKDIVN = 0;
 	/* set up the I/O ports */
-	rPACON = 0x3ffff;
-	rPBCON = 0xaaaaaaaa;
-	rPBUP = 0xffff;
-	rPECON = 0x0;
-	rPEUP = 0x0;
+	gpio->PACON = 0x3ffff;
+	gpio->PBCON = 0xaaaaaaaa;
+	gpio->PBUP = 0xffff;
+	gpio->PECON = 0x0;
+	gpio->PEUP = 0x0;
 #ifdef CONFIG_HWFLOW
 	/*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
 	/*   10,   10,   00,   00,    10,   00,    10 */
-	rPFCON=0xa22;
+	gpio->PFCON=0xa22;
 	/* Disable pull-up on Rx, Tx, CTS and RTS pins */
-	rPFUP=0x35;
+	gpio->PFUP=0x35;
 #else
 	/*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
 	/*   00,   00,   00,   00,    10,   00,    10 */
-	rPFCON = 0x22;
+	gpio->PFCON = 0x22;
 	/* Disable pull-up on Rx and Tx pins */
-	rPFUP = 0x5;
+	gpio->PFUP = 0x5;
 #endif	/* CONFIG_HWFLOW */
-	rPGCON = 0x0;
-	rPGUP = 0x0;
-	rOPENCR = 0x0;
+	gpio->PGCON = 0x0;
+	gpio->PGUP = 0x0;
+	gpio->OPENCR = 0x0;
 
 	/* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
 	gd->bd->bi_arch_number = 145;
diff --git a/board/smdk2410/config.mk b/board/smdk2410/config.mk
index b06b493..1af85da 100644
--- a/board/smdk2410/config.mk
+++ b/board/smdk2410/config.mk
@@ -16,10 +16,10 @@
 # Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
 # optionally with a ramdisk at 3080'0000
 #
-# we load ourself to 33F0'0000
+# we load ourself to 33F8'0000
 #
 # download area is 3300'0000
 #
 
 
-TEXT_BASE = 0x33F00000
+TEXT_BASE = 0x33F80000
diff --git a/board/smdk2410/smdk2410.c b/board/smdk2410/smdk2410.c
index 7f983ef..207cd44 100644
--- a/board/smdk2410/smdk2410.c
+++ b/board/smdk2410/smdk2410.c
@@ -68,38 +68,40 @@ static inline void delay (unsigned long loops)
 int board_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
 	/* to reduce PLL lock time, adjust the LOCKTIME register */
-	rLOCKTIME = 0xFFFFFF;
+	clk_power->LOCKTIME = 0xFFFFFF;
 
 	/* configure MPLL */
-	rMPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
 
 	/* some delay between MPLL and UPLL */
 	delay (4000);
 
 	/* configure UPLL */
-	rUPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
 
 	/* some delay between MPLL and UPLL */
 	delay (8000);
 
 	/* set up the I/O ports */
-	rGPACON = 0x007FFFFF;
-	rGPBCON = 0x00044555;
-	rGPBUP = 0x000007FF;
-	rGPCCON = 0xAAAAAAAA;
-	rGPCUP = 0x0000FFFF;
-	rGPDCON = 0xAAAAAAAA;
-	rGPDUP = 0x0000FFFF;
-	rGPECON = 0xAAAAAAAA;
-	rGPEUP = 0x0000FFFF;
-	rGPFCON = 0x000055AA;
-	rGPFUP = 0x000000FF;
-	rGPGCON = 0xFF95FFBA;
-	rGPGUP = 0x0000FFFF;
-	rGPHCON = 0x002AFAAA;
-	rGPHUP = 0x000007FF;
+	gpio->GPACON = 0x007FFFFF;
+	gpio->GPBCON = 0x00044555;
+	gpio->GPBUP = 0x000007FF;
+	gpio->GPCCON = 0xAAAAAAAA;
+	gpio->GPCUP = 0x0000FFFF;
+	gpio->GPDCON = 0xAAAAAAAA;
+	gpio->GPDUP = 0x0000FFFF;
+	gpio->GPECON = 0xAAAAAAAA;
+	gpio->GPEUP = 0x0000FFFF;
+	gpio->GPFCON = 0x000055AA;
+	gpio->GPFUP = 0x000000FF;
+	gpio->GPGCON = 0xFF95FFBA;
+	gpio->GPGUP = 0x0000FFFF;
+	gpio->GPHCON = 0x002AFAAA;
+	gpio->GPHUP = 0x000007FF;
 
 	/* arch number of SMDK2410-Board */
 	gd->bd->bi_arch_number = 193;
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 6c9971f..dd4105d 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -71,37 +71,39 @@ int board_init ()
 	extern int vfd_init_clocks(void);
 #endif
 	DECLARE_GLOBAL_DATA_PTR;
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 
 	/* memory and cpu-speed are setup before relocation */
 #ifdef CONFIG_TRAB_50MHZ
 	/* change the clock to be 50 MHz 1:1:1 */
 	/* MDIV:0x5c PDIV:4 SDIV:2 */
-	rMPLLCON = 0x5c042;
-	rCLKDIVN = 0;
+	clk_power->MPLLCON = 0x5c042;
+	clk_power->CLKDIVN = 0;
 #else
 	/* change the clock to be 133 MHz 1:2:4 */
 	/* MDIV:0x7d PDIV:4 SDIV:1 */
-	rMPLLCON = 0x7d041;
-	rCLKDIVN = 3;
+	clk_power->MPLLCON = 0x7d041;
+	clk_power->CLKDIVN = 3;
 #endif
 
 	/* set up the I/O ports */
-	rPACON = 0x3ffff;
-	rPBCON = 0xaaaaaaaa;
-	rPBUP  = 0xffff;
+	gpio->PACON = 0x3ffff;
+	gpio->PBCON = 0xaaaaaaaa;
+	gpio->PBUP  = 0xffff;
 	/* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0]	*/
 	/*  00,    10,      10,      10,      10,      10,      10 	*/
-	rPFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
+	gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
 #ifdef CONFIG_HWFLOW
 	/* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */
-	rPFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5);
+	gpio->PFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5);
 #else
 	/* do not pull up RXD0, RXD1, TXD0, TXD1 */
-	rPFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3);
+	gpio->PFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3);
 #endif
-	rPGCON = 0x0;
-	rPGUP  = 0x0;
-	rOPENCR= 0x0;
+	gpio->PGCON = 0x0;
+	gpio->PGUP  = 0x0;
+	gpio->OPENCR= 0x0;
 
 	/* arch number of SAMSUNG-Board */
 	/* MACH_TYPE_SMDK2400 */
@@ -112,8 +114,8 @@ int board_init ()
 	gd->bd->bi_boot_params = 0x0c000100;
 
 	/* Make sure both buzzers are turned off */
-	rPDCON |= 0x5400;
-	rPDDAT &= ~0xE0;
+	gpio->PDCON |= 0x5400;
+	gpio->PDDAT &= ~0xE0;
 
 #ifdef CONFIG_VFD
 	vfd_init_clocks();
@@ -305,57 +307,73 @@ static int key_pressed(void)
 
 #ifdef CFG_BRIGHTNESS
 
-#define SET_CS_TOUCH        (rPDDAT &= 0x5FF)
-#define CLR_CS_TOUCH        (rPDDAT |= 0x200)
+static inline void SET_CS_TOUCH(void)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+	gpio->PDDAT &= 0x5FF;
+}
+
+static inline void CLR_CS_TOUCH(void)
+{
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+	gpio->PDDAT |= 0x200;
+}
 
 static void spi_init(void)
 {
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
 	int i;
 
 	/* Configure I/O ports. */
- 	rPDCON = (rPDCON & 0xF3FFFF) | 0x040000;
-	rPGCON = (rPGCON & 0x0F3FFF) | 0x008000;
-	rPGCON = (rPGCON & 0x0CFFFF) | 0x020000;
-	rPGCON = (rPGCON & 0x03FFFF) | 0x080000;
+ 	gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
+	gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000;
+	gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000;
+	gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000;
 
-	CLR_CS_TOUCH;
+	CLR_CS_TOUCH();
 
-	rSPPRE = 0x1F; /* Baudrate ca. 514kHz */
-	rSPPIN = 0x01;  /* SPI-MOSI holds Level after last bit */
-	rSPCON = 0x1A;  /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */
+	spi->ch[0].SPPRE = 0x1F; /* Baudrate ca. 514kHz */
+	spi->ch[0].SPPIN = 0x01;  /* SPI-MOSI holds Level after last bit */
+	spi->ch[0].SPCON = 0x1A;  /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */
 
 	/* Dummy byte ensures clock to be low. */
 	for (i = 0; i < 10; i++) {
-		rSPTDAT = 0xFF;
+		spi->ch[0].SPTDAT = 0xFF;
 	}
 	wait_transmit_done();
 }
 
 static void wait_transmit_done(void)
 {
-	while (!(rSPSTA & 0x01)); /* wait until transfer is done */
+	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
+
+	while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
 }
 
 static void tsc2000_write(unsigned int page, unsigned int reg,
 						  unsigned int data)
 {
+	S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI();
 	unsigned int command;
 
-	SET_CS_TOUCH;
+	SET_CS_TOUCH();
 	command = 0x0000;
 	command |= (page << 11);
 	command |= (reg << 5);
 
-	rSPTDAT = (command & 0xFF00) >> 8;
+	spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
 	wait_transmit_done();
-	rSPTDAT = (command & 0x00FF);
+	spi->ch[0].SPTDAT = (command & 0x00FF);
 	wait_transmit_done();
-	rSPTDAT = (data & 0xFF00) >> 8;
+	spi->ch[0].SPTDAT = (data & 0xFF00) >> 8;
 	wait_transmit_done();
-	rSPTDAT = (data & 0x00FF);
+	spi->ch[0].SPTDAT = (data & 0x00FF);
 	wait_transmit_done();
 
-	CLR_CS_TOUCH;
+	CLR_CS_TOUCH();
 }
 
 static void tsc2000_set_brightness(void)
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index e00294f..1abc2ad 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -359,14 +359,17 @@ void transfer_pic(int display, unsigned char *adr, int height, int width)
  */
 int vfd_init_clocks (void)
 {
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
 
 	/* try to determine display type from the value
 	 * defined by pull-ups
 	 */
-	rPCUP = (rPCUP & 0xFFF0);	/* activate  GPC0...GPC3 pullups */
-	rPCCON = (rPCCON & 0xFFFFFF00);	/* configure GPC0...GPC3 as inputs */
+	gpio->PCUP = (gpio->PCUP & 0xFFF0);	/* activate  GPC0...GPC3 pullups */
+	gpio->PCCON = (gpio->PCCON & 0xFFFFFF00);	/* configure GPC0...GPC3 as inputs */
 	udelay (10);				/* allow signals to settle */
-	vfd_board_id = (~rPCDAT) & 0x000F;	/* read GPC0...GPC3 port pins */
+	vfd_board_id = (~gpio->PCDAT) & 0x000F;	/* read GPC0...GPC3 port pins */
 
 	VFD_DISABLE;				/* activate blank for the vfd */
 
@@ -377,39 +380,39 @@ int vfd_init_clocks (void)
 		/* If new board revision, then use PWM 3 as cpld-clock */
 		/* Enable 500 Hz timer for fill level sensor to operate properly */
 		/* Configure TOUT3 as functional pin, disable pull-up */
-		rPDCON &= ~0x30000;
-		rPDCON |= 0x20000;
-		rPDUP |= (1 << 8);
+		gpio->PDCON &= ~0x30000;
+		gpio->PDCON |= 0x20000;
+		gpio->PDUP |= (1 << 8);
 
 		/* Configure the prescaler */
-		rTCFG0 &= ~0xff00;
-		rTCFG0 |= 0x0f00;
+		timers->TCFG0 &= ~0xff00;
+		timers->TCFG0 |= 0x0f00;
 
 		/* Select MUX input (divider) for timer3 (1/16) */
-		rTCFG1 &= ~0xf000;
-		rTCFG1 |= 0x3000;
+		timers->TCFG1 &= ~0xf000;
+		timers->TCFG1 |= 0x3000;
 
 		/* Enable autoreload and set the counter and compare
 		 * registers to values for the 500 Hz clock
 		 * (for a given  prescaler (15) and divider (16)):
 		 * counter = (66000000 / 500) >> 9;
 		 */
-		rTCNTB3 = 0x101;
-		rTCMPB3 = 0x101 / 2;
+		timers->ch[3].TCNTB = 0x101;
+		timers->ch[3].TCMPB = 0x101 / 2;
 
 		/* Start timer */
-		rTCON = (rTCON | UPDATE3 | RELOAD3) & ~INVERT3;
-		rTCON = (rTCON | START3) & ~UPDATE3;
+		timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3;
+		timers->TCON = (timers->TCON | START3) & ~UPDATE3;
 	}
 #endif
 	/* If old board revision, then use vm-signal as cpld-clock */
-	rLCDCON2 = 0x00FFC000;
-	rLCDCON3 = 0x0007FF00;
-	rLCDCON4 = 0x00000000;
-	rLCDCON5 = 0x00000400;
-	rLCDCON1 = 0x00000B75;
+	lcd->LCDCON2 = 0x00FFC000;
+	lcd->LCDCON3 = 0x0007FF00;
+	lcd->LCDCON4 = 0x00000000;
+	lcd->LCDCON5 = 0x00000400;
+	lcd->LCDCON1 = 0x00000B75;
 	/* VM (GPD1) is used as clock for the CPLD */
-	rPDCON = (rPDCON & 0xFFFFFFF3) | 0x00000008;
+	gpio->PDCON = (gpio->PDCON & 0xFFFFFFF3) | 0x00000008;
 
 	return 0;
 }
@@ -425,6 +428,8 @@ int vfd_init_clocks (void)
  */
 int drv_vfd_init(void)
 {
+	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 	char *tmp;
 	ulong palette;
 	static int vfd_init_done = 0;
@@ -481,40 +486,40 @@ int drv_vfd_init(void)
 	 * see manual S3C2400
 	 */
 	/* Stopp LCD-Controller */
-	rLCDCON1 = 0x00000000;
+	lcd->LCDCON1 = 0x00000000;
 	/* frame buffer startadr */
-	rLCDSADDR1 = gd->fb_base >> 1;
+	lcd->LCDSADDR1 = gd->fb_base >> 1;
  	/* frame buffer endadr */
-	rLCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
-	rLCDSADDR3 = ((256/4));
-rLCDCON2 = 0x000DC000;
+	lcd->LCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
+	lcd->LCDSADDR3 = ((256/4));
+	lcd->LCDCON2 = 0x000DC000;
 	if(gd->vfd_type == VFD_TYPE_MN11236)
-		rLCDCON2 = 37 << 14;	/* MN11236: 38 lines */
+		lcd->LCDCON2 = 37 << 14;	/* MN11236: 38 lines */
 	else
-		rLCDCON2 = 55 << 14;	/* T119C:   56 lines */
-	rLCDCON3 = 0x0051000A;
-	rLCDCON4 = 0x00000001;
+		lcd->LCDCON2 = 55 << 14;	/* T119C:   56 lines */
+	lcd->LCDCON3 = 0x0051000A;
+	lcd->LCDCON4 = 0x00000001;
 	if (gd->vfd_type && vfd_inv_data)
-		rLCDCON5 = 0x000004C0;
+		lcd->LCDCON5 = 0x000004C0;
 	else
-		rLCDCON5 = 0x00000440;
+		lcd->LCDCON5 = 0x00000440;
 
 	/* Port pins as LCD output */
-	rPCCON =   (rPCCON & 0xFFFFFF00)| 0x000000AA;
-	rPDCON =   (rPDCON & 0xFFFFFF03)| 0x000000A8;
+	gpio->PCCON =   (gpio->PCCON & 0xFFFFFF00)| 0x000000AA;
+	gpio->PDCON =   (gpio->PDCON & 0xFFFFFF03)| 0x000000A8;
 
 	/* Synchronize VFD enable with LCD controller to avoid flicker	*/
-	rLCDCON1 = 0x00000B75;			/* Start LCD-Controller	*/
-	while((rLCDCON5 & 0x180000)!=0x100000);	/* Wait for end of VSYNC */
-	while((rLCDCON5 & 0x060000)!=0x040000);	/* Wait for next HSYNC	*/
-	while((rLCDCON5 & 0x060000)==0x040000);
-	while((rLCDCON5 & 0x060000)!=0x000000);
+	lcd->LCDCON1 = 0x00000B75;			/* Start LCD-Controller	*/
+	while((lcd->LCDCON5 & 0x180000)!=0x100000);	/* Wait for end of VSYNC */
+	while((lcd->LCDCON5 & 0x060000)!=0x040000);	/* Wait for next HSYNC	*/
+	while((lcd->LCDCON5 & 0x060000)==0x040000);
+	while((lcd->LCDCON5 & 0x060000)!=0x000000);
 	if(gd->vfd_type)
 		VFD_ENABLE;
 
-	debug ("LCDSADDR1: %lX\n", rLCDSADDR1);
-	debug ("LCDSADDR2: %lX\n", rLCDSADDR2);
-	debug ("LCDSADDR3: %lX\n", rLCDSADDR3);
+	debug ("LCDSADDR1: %lX\n", lcd->LCDSADDR1);
+	debug ("LCDSADDR2: %lX\n", lcd->LCDSADDR2);
+	debug ("LCDSADDR3: %lX\n", lcd->LCDSADDR3);
 
 	return 0;
 }
@@ -525,9 +530,11 @@ rLCDCON2 = 0x000DC000;
  */
 void disable_vfd (void)
 {
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
 	VFD_DISABLE;
-	rPDCON &= ~0xC;
-	rPDUP  &= ~0x2;
+	gpio->PDCON &= ~0xC;
+	gpio->PDUP  &= ~0x2;
 }
 
 /************************************************************************/