Merge with git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git

23 files changed, 2590 insertions, 739 deletions

diff --git a/board/amcc/yellowstone/init.S b/board/amcc/yellowstone/init.S
deleted file mode 100644
index 425ad08..0000000
--- a/board/amcc/yellowstone/init.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-
-/* General */
-#define TLB_VALID   0x00000200
-
-/* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_8M       0x00000060
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
-
-/* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
-
-/* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
-
-/* Some handy macros */
-
-#define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
-
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
-
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
-
-#define tlbentry(epn,sz,rpn,erpn,attr)\
-	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
-
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
-
-    .section .bootpg,"ax"
-    .globl tlbtab
-
-tlbtab:
-    tlbtab_start
-
-    /*
-     * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
-     * speed up boot process. It is patched after relocation to enable SA_I
-     */
-    tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
-
-    /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
-    tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
-
-    tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
-    tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
-
-    /* PCI */
-    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
-    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
-
-    /* USB 2.0 Device */
-    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
-
-    tlbtab_end
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
deleted file mode 100644
index 04f58e0..0000000
--- a/board/amcc/yellowstone/yellowstone.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-int board_early_init_f(void)
-{
-	register uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-	mtdcr(ebccfga, xbcfg);
-	reg = mfdcr(ebccfgd);
-	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
-
-	/*--------------------------------------------------------------------
-	 * Setup the GPIO pins
-	 *-------------------------------------------------------------------*/
-	/*CPLD cs */
-	/*setup Address lines for flash size 64Meg. */
-	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x50010000);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x50010000);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x50000000);
-
-	/*setup emac */
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
-	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
-	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
-	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
-
-	/*UART1 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
-	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
-
-	/* external interrupts IRQ0...3 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) & ~0x00f00000);
-	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00);
-	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
-
-#if 0 /* test-only */
-	/*setup USB 2.0 */
-	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
-	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
-	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
-	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
-	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
-#endif
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
-	 * Setup other serial configuration
-	 *-------------------------------------------------------------------*/
-	mfsdr(sdr_pci0, reg);
-	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
-	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
-	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
-
-	/*clear tmrclk divisor */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
-
-	/*enable ethernet */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
-
-#if 0 /* test-only */
-	/*enable usb 1.1 fs device and remove usb 2.0 reset */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
-#endif
-
-	/*get rid of flash write protect */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
-
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	uint pbcr;
-	int size_val = 0;
-
-	/* Re-do sizing to get full correct info */
-	mtdcr(ebccfga, pb0cr);
-	pbcr = mfdcr(ebccfgd);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
-	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
-	mtdcr(ebccfga, pb0cr);
-	mtdcr(ebccfgd, pbcr);
-
-	/* adjust flash start and offset */
-	gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
-	gd->bd->bi_flashoffset = 0;
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[0]);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	char *s = getenv("serial#");
-	u8 rev;
-	u8 val;
-
-	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
-
-	rev = *(u8 *)(CFG_CPLD + 0);
-	val = *(u8 *)(CFG_CPLD + 5) & 0x01;
-	printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33);
-
-	if (s != NULL) {
-		puts(", serial# ");
-		puts(s);
-	}
-	putc('\n');
-
-	return (0);
-}
-
-/*************************************************************************
- *  sdram_init -- doesn't use serial presence detect.
- *
- *  Assumes:    256 MB, ECC, non-registered
- *              PLB @ 133 MHz
- *
- ************************************************************************/
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-void sdram_tr1_set(int ram_address, int* tr1_value)
-{
-	int i;
-	int j, k;
-	volatile unsigned int* ram_pointer =  (unsigned int*)ram_address;
-	int first_good = -1, last_bad = 0x1ff;
-
-	unsigned long test[NUM_TRIES] = {
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
-		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
-	/* go through all possible SDRAM0_TR1[RDCT] values */
-	for (i=0; i<=0x1ff; i++) {
-		/* set the current value for TR1 */
-		mtsdram(mem_tr1, (0x80800800 | i));
-
-		/* write values */
-		for (j=0; j<NUM_TRIES; j++) {
-			ram_pointer[j] = test[j];
-
-			/* clear any cache at ram location */
-			__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-		}
-
-		/* read values back */
-		for (j=0; j<NUM_TRIES; j++) {
-			for (k=0; k<NUM_READS; k++) {
-				/* clear any cache at ram location */
-				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
-				if (ram_pointer[j] != test[j])
-					break;
-			}
-
-			/* read error */
-			if (k != NUM_READS) {
-				break;
-			}
-		}
-
-		/* we have a SDRAM0_TR1[RDCT] that is part of the window */
-		if (j == NUM_TRIES) {
-			if (first_good == -1)
-				first_good = i;		/* found beginning of window */
-		} else { /* bad read */
-			/* if we have not had a good read then don't care */
-			if(first_good != -1) {
-				/* first failure after a good read */
-				last_bad = i-1;
-				break;
-			}
-		}
-	}
-
-	/* return the current value for TR1 */
-	*tr1_value = (first_good + last_bad) / 2;
-}
-
-void sdram_init(void)
-{
-	register uint reg;
-	int tr1_bank1, tr1_bank2;
-
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
-	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram(mem_clktr, 0x40000000);	/* ?? */
-	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
-
-	/*clear this first, if the DDR is enabled by a debugger
-	  then you can not make changes. */
-	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
-
-	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
-	mtsdram(mem_rtr, 0x04080000);	/* ?? */
-	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	mtsdram(mem_cfg0, 0x30000000);	/* Disable EEC */
-	udelay(400);		/* Delay 200 usecs (min)            */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram(mem_cfg0, 0x80000000);	/* Enable */
-
-	for (;;) {
-		mfsdram(mem_mcsts, reg);
-		if (reg & 0x80000000)
-			break;
-	}
-
-	sdram_tr1_set(0x00000000, &tr1_bank1);
-	sdram_tr1_set(0x08000000, &tr1_bank2);
-	mtsdram(mem_tr1, (((tr1_bank1+tr1_bank2)/2) | 0x80800800) );
-}
-
-/*************************************************************************
- *  long int initdram
- *
- ************************************************************************/
-long int initdram(int board)
-{
-	sdram_init();
-	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
-}
-
-#if defined(CFG_DRAM_TEST)
-int testdram(void)
-{
-	unsigned long *mem = (unsigned long *)0;
-	const unsigned long kend = (1024 / sizeof(unsigned long));
-	unsigned long k, n;
-
-	mtmsr(0);
-
-	for (k = 0; k < CFG_KBYTES_SDRAM;
-	     ++k, mem += (1024 / sizeof(unsigned long))) {
-		if ((k & 1023) == 0) {
-			printf("%3d MB\r", k / 1024);
-		}
-
-		memset(mem, 0xaaaaaaaa, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0xaaaaaaaa) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-
-		memset(mem, 0x55555555, 1024);
-		for (n = 0; n < kend; ++n) {
-			if (mem[n] != 0x55555555) {
-				printf("SDRAM test fails at: %08x\n",
-				       (uint) & mem[n]);
-				return 1;
-			}
-		}
-	}
-	printf("SDRAM test passes\n");
-	return 0;
-}
-#endif
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller *hose)
-{
-	unsigned long addr;
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB3 devices to 0.
-	  | Set PLB3 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp1, addr);
-	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb3_acr);
-	mtdcr(plb3_acr, addr | 0x80000000);
-
-	/*-------------------------------------------------------------------------+
-	  | Set priority for all PLB4 devices to 0.
-	  +-------------------------------------------------------------------------*/
-	mfsdr(sdr_amp0, addr);
-	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
-	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
-	mtdcr(plb4_acr, addr);
-
-	/*-------------------------------------------------------------------------+
-	  | Set Nebula PLB4 arbiter to fair mode.
-	  +-------------------------------------------------------------------------*/
-	/* Segment0 */
-	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
-	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
-	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
-	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
-	mtdcr(plb0_acr, addr);
-
-	/* Segment1 */
-	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
-	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
-	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
-	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
-	mtdcr(plb1_acr, addr);
-
-	return 1;
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller *hose)
-{
-	/*--------------------------------------------------------------------------+
-	 * Set up Direct MMIO registers
-	 *--------------------------------------------------------------------------*/
-	/*--------------------------------------------------------------------------+
-	  | PowerPC440 EP PCI Master configuration.
-	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
-	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
-	  |   Use byte reversed out routines to handle endianess.
-	  | Make this region non-prefetchable.
-	  +--------------------------------------------------------------------------*/
-	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
-	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
-	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
-	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
-	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
-
-	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
-	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
-	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
-
-	/*--------------------------------------------------------------------------+
-	 * Set up Configuration registers
-	 *--------------------------------------------------------------------------*/
-
-	/* Program the board's subsystem id/vendor id */
-	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
-			      CFG_PCI_SUBSYS_VENDORID);
-	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
-
-	/* Configure command register as bus master */
-	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
-	/* 240nS PCI clock */
-	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
-	/* No error reporting */
-	pci_write_config_word(0, PCI_ERREN, 0);
-
-	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  pci_master_init
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
-void pci_master_init(struct pci_controller *hose)
-{
-	unsigned short temp_short;
-
-	/*--------------------------------------------------------------------------+
-	  | Write the PowerPC440 EP PCI Configuration regs.
-	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
-	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
-	  +--------------------------------------------------------------------------*/
-	pci_read_config_word(0, PCI_COMMAND, &temp_short);
-	pci_write_config_word(0, PCI_COMMAND,
-			      temp_short | PCI_COMMAND_MASTER |
-			      PCI_COMMAND_MEMORY);
-}
-#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	/* Bamboo is always configured as host. */
-	return (1);
-}
-#endif				/* defined(CONFIG_PCI) */
-
-/*************************************************************************
- *  hw_watchdog_reset
- *
- *	This routine is called to reset (keep alive) the watchdog timer
- *
- ************************************************************************/
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
-
-}
-#endif
-
-void board_reset(void)
-{
-	/* give reset to BCSR */
-	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
-}
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index d47219c..c2e12ba 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -65,12 +65,14 @@ int board_early_init_f(void)
 	out32(GPIO1_TSRL, in32(GPIO1_TSRL) & ~0x0000ff00);
 	out32(GPIO1_ISR1L, in32(GPIO1_ISR1L) | 0x00005500);
 
+#ifdef CONFIG_440EP
 	/*setup USB 2.0 */
 	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
 	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
 	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
 	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
 	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+#endif
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
@@ -105,8 +107,10 @@ int board_early_init_f(void)
 	/*enable ethernet */
 	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
 
+#ifdef CONFIG_440EP
 	/*enable usb 1.1 fs device and remove usb 2.0 reset */
 	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+#endif
 
 	/*get rid of flash write protect */
 	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
@@ -171,7 +175,11 @@ int checkboard(void)
 	u8 rev;
 	u8 val;
 
+#ifdef CONFIG_440EP
 	printf("Board: Yosemite - AMCC PPC440EP Evaluation Board");
+#else
+	printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board");
+#endif
 
 	rev = *(u8 *)(CFG_CPLD + 0);
 	val = *(u8 *)(CFG_CPLD + 5) & 0x01;
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index dbed597..36bb7ce 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -29,6 +29,7 @@
  */
 
 #include <common.h>
+#include <command.h>
 #include <74xx_7xx.h>
 #include "../../Marvell/include/memory.h"
 #include "../../Marvell/include/pci.h"
@@ -899,3 +900,24 @@ void board_prebootm_init ()
 	flush_data_cache ();
 	dcache_disable ();
 }
+
+
+int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	unsigned int reset_sample_low;
+	unsigned int reset_sample_high;
+
+	GT_REG_READ(0x3c4, &reset_sample_low);
+	GT_REG_READ(0x3d4, &reset_sample_high);
+	printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high);
+
+        return(0);
+}
+
+
+U_BOOT_CMD(
+	show_cfg,	1,	1,	do_show_cfg,
+	"show_cfg- Show Marvell strapping register\n",
+	"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
+	);
+
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index 6bdfc1d..c094755 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -1504,6 +1504,8 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 
 /*	for (i = info->slot * 2; i < ((info->slot * 2) + info->banks); i++) */
 	{
+	        int l, l1;
+
 		i = info->slot;
 		DP (printf
 		    ("\n*** Running a MRS cycle for bank %d ***\n", i));
@@ -1511,20 +1513,39 @@ int setup_sdram (AUX_MEM_DIMM_INFO * info)
 		/* map the bank */
 		memory_map_bank (i, 0, GB / 4);
 #if 1				/* test only */
-		/* set SDRAM mode */ /* To_do check it */
+
+		tmp = GTREGREAD (SDRAM_MODE);
+		GT_REG_WRITE (EXTENDED_DRAM_MODE, 0x0);
+		GT_REG_WRITE (SDRAM_OPERATION, 0x4);
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
+
+		GT_REG_WRITE (SDRAM_MODE, tmp | 0x80);
 		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
+		l1 = 0;
+		for (l=0;l<200;l++)
+		        l1 += GTREGREAD (SDRAM_OPERATION);
 
+		GT_REG_WRITE (SDRAM_MODE, tmp);
+		GT_REG_WRITE (SDRAM_OPERATION, 0x3);
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
 
 		/* switch back to normal operation mode */
-		GT_REG_WRITE (SDRAM_OPERATION, 0);
-		check = GTREGREAD (SDRAM_OPERATION);
-		DP (printf
-		    ("\n*** SDRAM_OPERATION 1418 (0 = Normal Operation) = %08lx ***\n",
-		     check));
+		GT_REG_WRITE (SDRAM_OPERATION, 0x5);
+		while (GTREGREAD (SDRAM_OPERATION) != 0) {
+		        DP (printf
+			    ("\n*** SDRAM_OPERATION 1418 after SDRAM_MODE: Module still busy ... please wait... ***\n"));
+		}
+
 #endif /* test only */
 		/* unmap the bank */
 		memory_map_bank (i, 0, 0);
diff --git a/board/amcc/yellowstone/Makefile b/board/esd/mecp5200/Makefile
index 261e5d4..45efdb0 100644
--- a/board/amcc/yellowstone/Makefile
+++ b/board/esd/mecp5200/Makefile
@@ -1,5 +1,6 @@
+
 #
-# (C) Copyright 2002-2006
+# (C) Copyright 2003-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -26,13 +27,12 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS	= $(BOARD).o
-SOBJS	= init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
-$(LIB):	$(OBJS) $(SOBJS)
+$(LIB):	$(obj).depend $(OBJS)
 	$(AR) $(ARFLAGS) $@ $(OBJS)
 
 clean:
diff --git a/board/esd/mecp5200/config.mk b/board/esd/mecp5200/config.mk
new file mode 100644
index 0000000..07b5de1
--- /dev/null
+++ b/board/esd/mecp5200/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# IceCube board:
+#
+#	Valid values for TEXT_BASE are:
+#
+#	0xFFF00000   boot high (standard configuration)
+#	0xFF000000   boot low for 16 MiB boards
+#	0xFF800000   boot low for  8 MiB boards
+#	0x00100000   boot from RAM (for testing only)
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+## Standard: boot high
+TEXT_BASE = 0xFFF00000
+## For testing: boot from RAM
+# TEXT_BASE = 0x00100000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/esd/mecp5200/mecp5200.c b/board/esd/mecp5200/mecp5200.c
new file mode 100644
index 0000000..c4b91e9
--- /dev/null
+++ b/board/esd/mecp5200/mecp5200.c
@@ -0,0 +1,261 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * pf5200.c - main board support/init for the esd pf5200.
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <command.h>
+
+#include "mt46v16m16-75.h"
+
+void init_power_switch(void);
+
+static void sdram_start(int hi_addr)
+{
+	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+	/* unlock mode register */
+	*(vu_long *) MPC5XXX_SDRAM_CTRL =
+	    SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* precharge all banks */
+	*(vu_long *) MPC5XXX_SDRAM_CTRL =
+	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* set mode register: extended mode */
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+	__asm__ volatile ("sync");
+
+	/* set mode register: reset DLL */
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+	__asm__ volatile ("sync");
+
+	/* precharge all banks */
+	*(vu_long *) MPC5XXX_SDRAM_CTRL =
+	    SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* auto refresh */
+	*(vu_long *) MPC5XXX_SDRAM_CTRL =
+	    SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+	__asm__ volatile ("sync");
+
+	/* set mode register */
+	*(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+	__asm__ volatile ("sync");
+
+	/* normal operation */
+	*(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+	__asm__ volatile ("sync");
+}
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            is something else than 0x00000000.
+ */
+
+long int initdram(int board_type)
+{
+	ulong dramsize = 0;
+	ulong test1, test2;
+
+	/* setup SDRAM chip selects */
+	*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e;	/* 2G at 0x0 */
+	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000;	/* disabled */
+	__asm__ volatile ("sync");
+
+	/* setup config registers */
+	*(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+	*(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+	__asm__ volatile ("sync");
+
+	/* set tap delay */
+	*(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+	__asm__ volatile ("sync");
+
+	/* find RAM size using SDRAM CS0 only */
+	sdram_start(0);
+	test1 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else {
+		dramsize = test2;
+	}
+
+	/* memory smaller than 1MB is impossible */
+	if (dramsize < (1 << 20))
+		dramsize = 0;
+
+	/* set SDRAM CS0 size according to the amount of RAM found */
+	if (dramsize > 0) {
+		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
+		    0x13 + __builtin_ffs(dramsize >> 20) - 1;
+		/* let SDRAM CS1 start right after CS0 */
+		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
+	} else {
+#if 0
+		*(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0;	/* disabled */
+		/* let SDRAM CS1 start right after CS0 */
+		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;	/* 2G */
+#else
+		*(vu_long *) MPC5XXX_SDRAM_CS0CFG =
+		    0x13 + __builtin_ffs(0x08000000 >> 20) - 1;
+		/* let SDRAM CS1 start right after CS0 */
+		*(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x08000000 + 0x0000001e;	/* 2G */
+#endif
+	}
+
+#if 0
+	/* find RAM size using SDRAM CS1 only */
+	sdram_start(0);
+	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	sdram_start(1);
+	get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+	sdram_start(0);
+#endif
+	/* set SDRAM CS1 size according to the amount of RAM found */
+
+	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;	/* disabled */
+
+	init_power_switch();
+	return (dramsize);
+}
+
+int checkboard(void)
+{
+	puts("Board: esd CPX CPU5200 (mecp5200)\n");
+	return 0;
+}
+
+void flash_preinit(void)
+{
+	/*
+	 * Now, when we are in RAM, enable flash write
+	 * access for detection process.
+	 * Note that CS_BOOT cannot be cleared when
+	 * executing in flash.
+	 */
+	*(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1;	/* clear RO */
+}
+
+void flash_afterinit(ulong size)
+{
+	if (size == CFG_FLASH_SIZE) {
+		/* adjust mapping */
+		*(vu_long *) MPC5XXX_BOOTCS_START =
+		    *(vu_long *) MPC5XXX_CS0_START =
+		    START_REG(CFG_BOOTCS_START | size);
+		*(vu_long *) MPC5XXX_BOOTCS_STOP =
+		    *(vu_long *) MPC5XXX_CS0_STOP =
+		    STOP_REG(CFG_BOOTCS_START | size, size);
+	}
+}
+
+#ifdef	CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+	pci_mpc5xxx_init(&hose);
+}
+#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+#define GPIO_PSC1_4	0x01000000UL
+
+void init_ide_reset(void)
+{
+	debug("init_ide_reset\n");
+
+	/* Configure PSC1_4 as GPIO output for ATA reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
+}
+
+void ide_set_reset(int idereset)
+{
+	debug("ide_reset(%d)\n", idereset);
+
+	if (idereset)
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
+	else
+		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
+}
+#endif				/* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#define MPC5XXX_SIMPLEIO_GPIO_ENABLE       (MPC5XXX_GPIO + 0x0004)
+#define MPC5XXX_SIMPLEIO_GPIO_DIR          (MPC5XXX_GPIO + 0x000C)
+#define MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT  (MPC5XXX_GPIO + 0x0010)
+#define MPC5XXX_SIMPLEIO_GPIO_DATA_INPUT   (MPC5XXX_GPIO + 0x0014)
+
+#define MPC5XXX_INTERRUPT_GPIO_ENABLE      (MPC5XXX_GPIO + 0x0020)
+#define MPC5XXX_INTERRUPT_GPIO_DIR         (MPC5XXX_GPIO + 0x0028)
+#define MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT (MPC5XXX_GPIO + 0x002C)
+#define MPC5XXX_INTERRUPT_GPIO_STATUS      (MPC5XXX_GPIO + 0x003C)
+
+#define GPIO_WU6	0x40000000UL
+#define GPIO_USB0       0x00010000UL
+#define GPIO_USB9       0x08000000UL
+#define GPIO_USB9S      0x00080000UL
+
+void init_power_switch(void)
+{
+	debug("init_power_switch\n");
+
+	/* Configure GPIO_WU6 as GPIO output for ATA reset */
+	*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
+	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
+	*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
+	__asm__ volatile ("sync");
+
+	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT &= ~GPIO_USB0;
+	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_ENABLE |= GPIO_USB0;
+	*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DIR |= GPIO_USB0;
+	__asm__ volatile ("sync");
+
+	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
+	*(vu_long *) MPC5XXX_INTERRUPT_GPIO_ENABLE &= ~GPIO_USB9;
+	__asm__ volatile ("sync");
+
+	if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) == 0) {
+		*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |= GPIO_USB0;
+		__asm__ volatile ("sync");
+	}
+}
diff --git a/board/esd/mecp5200/mt46v16m16-75.h b/board/esd/mecp5200/mt46v16m16-75.h
new file mode 100644
index 0000000..22d0a55
--- /dev/null
+++ b/board/esd/mecp5200/mt46v16m16-75.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR	1	/* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE	0x018D0000
+#define SDRAM_EMODE	0x40090000
+#define SDRAM_CONTROL	0x705f0f00
+#define SDRAM_CONFIG1	0x73722930
+#define SDRAM_CONFIG2	0x47770000
+#define SDRAM_TAPDELAY	0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
diff --git a/board/amcc/yellowstone/u-boot.lds b/board/esd/mecp5200/u-boot.lds
index a0ba44d..d999dd1 100644
--- a/board/amcc/yellowstone/u-boot.lds
+++ b/board/esd/mecp5200/u-boot.lds
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2002
+ * (C) Copyright 2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,16 +27,6 @@ SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/
    __DYNAMIC = 0;    */
 SECTIONS
 {
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/ppc4xx/start.o	(.bootpg)
-  } = 0xffff
-
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
   .interp : { *(.interp) }
@@ -63,44 +53,21 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/amcc/yellowstone/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
-
+    cpu/mpc5xxx/start.o	(.text)
     *(.text)
     *(.fixup)
     *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
+    . = ALIGN(16);
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
-    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
   .dtors     : { *(.dtors)   }
 
   /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
+  . = (. + 0x0FFF) & 0xFFFFF000;
   _erotext = .;
   PROVIDE (erotext = .);
   .reloc   :
@@ -111,8 +78,8 @@ SECTIONS
     _FIXUP_TABLE_ = .;
     *(.fixup)
   }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
 
   .data    :
   {
@@ -126,22 +93,20 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
-  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
 
-  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
 
-  . = ALIGN(256);
+  . = ALIGN(4096);
   __init_begin = .;
   .text.init : { *(.text.init) }
   .data.init : { *(.data.init) }
-  . = ALIGN(256);
+  . = ALIGN(4096);
   __init_end = .;
 
   __bss_start = .;
diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile
new file mode 100644
index 0000000..5a30198
--- /dev/null
+++ b/board/lpc2292sodimm/Makefile
@@ -0,0 +1,58 @@
+#
+# (C) Copyright 2002
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= lpc2292sodimm.o flash.o mmc.o spi.o mmc_hw.o eth.o
+SOBJS	:= lowlevel_init.o iap_entry.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+# this MUST be compiled as thumb code!
+iap_entry.o:
+	arm-linux-gcc  -D__ASSEMBLY__ -g  -Os   -fno-strict-aliasing  \
+	-fno-common -ffixed-r8 -msoft-float  -D__KERNEL__ \
+	-DTEXT_BASE=0x81500000  -I/home/garyj/proj/LPC/u-boot/include \
+	-fno-builtin -ffreestanding -nostdinc -isystem \
+	/opt/eldk/arm/usr/bin/../lib/gcc/arm-linux/4.0.0/include -pipe  \
+	-DCONFIG_ARM -D__ARM__ -march=armv4t -mtune=arm7tdmi -mabi=apcs-gnu \
+	-c -o iap_entry.o iap_entry.S
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/amcc/yellowstone/config.mk b/board/lpc2292sodimm/config.mk
index 4ab0ea0..b28f418 100644
--- a/board/amcc/yellowstone/config.mk
+++ b/board/lpc2292sodimm/config.mk
@@ -1,5 +1,9 @@
 #
-# (C) Copyright 2002
+# (C) Copyright 2000
+# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+# Marius Groeger <mgroeger@sysgo.de>
+#
+# (C) Copyright 2000
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,24 +25,6 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0x00001000
-
-ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
-else
-TEXT_BASE = 0xFFF80000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
-endif
+#address where u-boot will be relocated
+#TEXT_BASE = 0x0
+TEXT_BASE = 0x81500000
diff --git a/board/lpc2292sodimm/eth.c b/board/lpc2292sodimm/eth.c
new file mode 100644
index 0000000..249ab04
--- /dev/null
+++ b/board/lpc2292sodimm/eth.c
@@ -0,0 +1,885 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <net.h>
+#include <asm/arch/hardware.h>
+#include "spi.h"
+
+/*
+ * Control Registers in Bank 0
+ */
+
+#define CTL_REG_ERDPTL	 0x00
+#define CTL_REG_ERDPTH	 0x01
+#define CTL_REG_EWRPTL	 0x02
+#define CTL_REG_EWRPTH	 0x03
+#define CTL_REG_ETXSTL	 0x04
+#define CTL_REG_ETXSTH	 0x05
+#define CTL_REG_ETXNDL	 0x06
+#define CTL_REG_ETXNDH	 0x07
+#define CTL_REG_ERXSTL	 0x08
+#define CTL_REG_ERXSTH	 0x09
+#define CTL_REG_ERXNDL	 0x0A
+#define CTL_REG_ERXNDA	 0x0B
+#define CTL_REG_ERXRDPTL 0x0C
+#define CTL_REG_ERXRDPTH 0x0D
+#define CTL_REG_ERXWRPTL 0x0E
+#define CTL_REG_ERXWRPTH 0x0F
+#define CTL_REG_EDMASTL  0x10
+#define CTL_REG_EDMASTH  0x11
+#define CTL_REG_EDMANDL  0x12
+#define CTL_REG_EDMANDH  0x13
+#define CTL_REG_EDMADSTL 0x14
+#define CTL_REG_EDMADSTH 0x15
+#define CTL_REG_EDMACSL  0x16
+#define CTL_REG_EDMACSH  0x17
+/* these are common in all banks */
+#define CTL_REG_EIE	 0x1B
+#define CTL_REG_EIR	 0x1C
+#define CTL_REG_ESTAT	 0x1D
+#define CTL_REG_ECON2	 0x1E
+#define CTL_REG_ECON1	 0x1F
+
+/*
+ * Control Registers in Bank 1
+ */
+
+#define CTL_REG_EHT0	0x00
+#define CTL_REG_EHT1	0x01
+#define CTL_REG_EHT2	0x02
+#define CTL_REG_EHT3	0x03
+#define CTL_REG_EHT4	0x04
+#define CTL_REG_EHT5	0x05
+#define CTL_REG_EHT6	0x06
+#define CTL_REG_EHT7	0x07
+#define CTL_REG_EPMM0	0x08
+#define CTL_REG_EPMM1	0x09
+#define CTL_REG_EPMM2	0x0A
+#define CTL_REG_EPMM3	0x0B
+#define CTL_REG_EPMM4	0x0C
+#define CTL_REG_EPMM5	0x0D
+#define CTL_REG_EPMM6	0x0E
+#define CTL_REG_EPMM7	0x0F
+#define CTL_REG_EPMCSL	0x10
+#define CTL_REG_EPMCSH	0x11
+#define CTL_REG_EPMOL	0x14
+#define CTL_REG_EPMOH	0x15
+#define CTL_REG_EWOLIE	0x16
+#define CTL_REG_EWOLIR	0x17
+#define CTL_REG_ERXFCON 0x18
+#define CTL_REG_EPKTCNT 0x19
+
+/*
+ * Control Registers in Bank 2
+ */
+
+#define CTL_REG_MACON1	 0x00
+#define CTL_REG_MACON2	 0x01
+#define CTL_REG_MACON3	 0x02
+#define CTL_REG_MACON4	 0x03
+#define CTL_REG_MABBIPG  0x04
+#define CTL_REG_MAIPGL	 0x06
+#define CTL_REG_MAIPGH	 0x07
+#define CTL_REG_MACLCON1 0x08
+#define CTL_REG_MACLCON2 0x09
+#define CTL_REG_MAMXFLL  0x0A
+#define CTL_REG_MAMXFLH  0x0B
+#define CTL_REG_MAPHSUP  0x0D
+#define CTL_REG_MICON	 0x11
+#define CTL_REG_MICMD	 0x12
+#define CTL_REG_MIREGADR 0x14
+#define CTL_REG_MIWRL	 0x16
+#define CTL_REG_MIWRH	 0x17
+#define CTL_REG_MIRDL	 0x18
+#define CTL_REG_MIRDH	 0x19
+
+/*
+ * Control Registers in Bank 3
+ */
+
+#define CTL_REG_MAADR1	0x00
+#define CTL_REG_MAADR0	0x01
+#define CTL_REG_MAADR3	0x02
+#define CTL_REG_MAADR2	0x03
+#define CTL_REG_MAADR5	0x04
+#define CTL_REG_MAADR4	0x05
+#define CTL_REG_EBSTSD	0x06
+#define CTL_REG_EBSTCON 0x07
+#define CTL_REG_EBSTCSL 0x08
+#define CTL_REG_EBSTCSH 0x09
+#define CTL_REG_MISTAT	0x0A
+#define CTL_REG_EREVID	0x12
+#define CTL_REG_ECOCON	0x15
+#define CTL_REG_EFLOCON 0x17
+#define CTL_REG_EPAUSL	0x18
+#define CTL_REG_EPAUSH	0x19
+
+
+/*
+ * PHY Register
+ */
+
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+
+
+/*
+ * Receive Filter Register (ERXFCON) bits
+ */
+
+#define ENC_RFR_UCEN  0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN  0x10
+#define ENC_RFR_MPEN  0x08
+#define ENC_RFR_HTEN  0x04
+#define ENC_RFR_MCEN  0x02
+#define ENC_RFR_BCEN  0x01
+
+/*
+ * ECON1 Register Bits
+ */
+
+#define ENC_ECON1_TXRST  0x80
+#define ENC_ECON1_RXRST  0x40
+#define ENC_ECON1_DMAST  0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS  0x08
+#define ENC_ECON1_RXEN	 0x04
+#define ENC_ECON1_BSEL1  0x02
+#define ENC_ECON1_BSEL0  0x01
+
+/*
+ * ECON2 Register Bits
+ */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC  0x40
+#define ENC_ECON2_PWRSV   0x20
+#define ENC_ECON2_VRPS	  0x08
+
+/*
+ * EIR Register Bits
+ */
+#define ENC_EIR_PKTIF  0x40
+#define ENC_EIR_DMAIF  0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF   0x08
+#define ENC_EIR_WOLIF  0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/*
+ * ESTAT Register Bits
+ */
+
+#define ENC_ESTAT_INT	  0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY  0x04
+#define ENC_ESTAT_TXABRT  0x02
+#define ENC_ESTAT_CLKRDY  0x01
+
+/*
+ * EIE Register Bits
+ */
+
+#define ENC_EIE_INTIE  0x80
+#define ENC_EIE_PKTIE  0x40
+#define ENC_EIE_DMAIE  0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE   0x08
+#define ENC_EIE_WOLIE  0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/*
+ * MACON1 Register Bits
+ */
+#define ENC_MACON1_LOOPBK  0x10
+#define ENC_MACON1_TXPAUS  0x08
+#define ENC_MACON1_RXPAUS  0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN  0x01
+
+
+/*
+ * MACON2 Register Bits
+ */
+#define ENC_MACON2_MARST   0x80
+#define ENC_MACON2_RNDRST  0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/*
+ * MACON3 Register Bits
+ */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN  0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX  0x01
+
+/*
+ * MICMD Register Bits
+ */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD   0x01
+
+/*
+ * MISTAT Register Bits
+ */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN   0x02
+#define ENC_MISTAT_BUSY   0x01
+
+/*
+ * PHID1 and PHID2 values
+ */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK	0xFC00
+
+
+#define ENC_SPI_SLAVE_CS 0x00010000	/* pin P1.16 */
+#define ENC_RESET	 0x00020000	/* pin P1.17 */
+
+#define FAILSAFE_VALUE 5000
+
+/*
+ * Controller memory layout:
+ *
+ * 0x0000 - 0x17ff  6k bytes receive buffer
+ * 0x1800 - 0x1fff  2k bytes transmit buffer
+ */
+/* Use the lower memory for receiver buffer. See errata pt. 5 */
+#define ENC_RX_BUF_START 0x0000
+#define ENC_TX_BUF_START 0x1800
+
+/* maximum frame length */
+#define ENC_MAX_FRM_LEN 1518
+
+#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
+#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
+#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
+
+
+static unsigned char encReadReg (unsigned char regNo);
+static void encWriteReg (unsigned char regNo, unsigned char data);
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
+static void encReadBuff (unsigned short length, unsigned char *pBuff);
+static void encWriteBuff (unsigned short length, unsigned char *pBuff);
+static void encBitSet (unsigned char regNo, unsigned char data);
+static void encBitClr (unsigned char regNo, unsigned char data);
+static void encReset (void);
+static void encInit (unsigned char *pEthAddr);
+static unsigned short phyRead (unsigned char addr);
+static void encPoll (void);
+static void encRx (void);
+
+#define m_nic_read(reg) encReadReg(reg)
+#define m_nic_write(reg, data) encWriteReg(reg, data)
+#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
+#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
+#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
+
+/* bit field set */
+#define m_nic_bfs(reg, data) encBitSet(reg, data)
+
+/* bit field clear */
+#define m_nic_bfc(reg, data) encBitClr(reg, data)
+
+static unsigned char bank = 0;	/* current bank in enc28j60 */
+static unsigned char next_pointer_lsb;
+static unsigned char next_pointer_msb;
+
+static unsigned char buffer[ENC_MAX_FRM_LEN];
+static int rxResetCounter = 0;
+
+#define RX_RESET_COUNTER 1000;
+
+/*-----------------------------------------------------------------------------
+ * Returns 0 when failes otherwize 1
+ */
+int eth_init (bd_t * bis)
+{
+	/* configure GPIO */
+	(*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
+	(*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
+
+	/* CS and RESET active low */
+	PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
+	PUT32 (IO1SET, ENC_RESET);
+
+	spi_init ();
+
+	/* initialize controller */
+	encReset ();
+	encInit (bis->bi_enetaddr);
+
+	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN);	/* enable receive */
+
+	return 0;
+}
+
+int eth_send (volatile void *packet, int length)
+{
+	/* check frame length, etc. */
+	/* TODO: */
+
+	/* switch to bank 0 */
+	m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+	/* set EWRPT */
+	m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
+	m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
+
+	/* set ETXST */
+	m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
+	m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
+
+	/* write packet */
+	m_nic_write_data (length, (unsigned char *) packet);
+
+	/* set ETXND */
+	m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
+	m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+
+	/* set ECON1.TXRTS */
+	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
+
+	return 0;
+}
+
+
+/*****************************************************************************
+ * This function resets the receiver only. This function may be called from
+ * interrupt-context.
+ */
+static void encReceiverReset (void)
+{
+	unsigned char econ1;
+
+	econ1 = m_nic_read (CTL_REG_ECON1);
+	if ((econ1 & ENC_ECON1_RXRST) == 0) {
+		m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
+		rxResetCounter = RX_RESET_COUNTER;
+	}
+}
+
+/*****************************************************************************
+ * receiver reset timer
+ */
+static void encReceiverResetCallback (void)
+{
+	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
+	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN);	/* enable receive */
+}
+
+/*-----------------------------------------------------------------------------
+ * Check for received packets. Call NetReceive for each packet. The return
+ * value is ignored by the caller.
+ */
+int eth_rx (void)
+{
+	if (rxResetCounter > 0 && --rxResetCounter == 0) {
+		encReceiverResetCallback ();
+	}
+
+	encPoll ();
+
+	return 0;
+}
+
+void eth_halt (void)
+{
+	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN);	/* disable receive */
+}
+
+/*****************************************************************************/
+
+static void encPoll (void)
+{
+	unsigned char eir_reg;
+	volatile unsigned char estat_reg;
+	unsigned char pkt_cnt;
+
+	/* clear global interrupt enable bit in enc28j60 */
+	m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
+	estat_reg = m_nic_read (CTL_REG_ESTAT);
+
+	eir_reg = m_nic_read (CTL_REG_EIR);
+
+	if (eir_reg & ENC_EIR_TXIF) {
+		/* clear TXIF bit in EIR */
+		m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+	}
+
+	/* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+
+	/* move to bank 1 */
+	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+	/* read pktcnt */
+	pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+	if (pkt_cnt > 0) {
+		if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+			/*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+		}
+		encRx ();
+		/* clear PKTIF bit in EIR, this should not need to be done but it
+		   seems like we get problems if we do not */
+		m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+	}
+
+	if (eir_reg & ENC_EIR_RXERIF) {
+		printf ("encPoll: rx error\n");
+		m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
+	}
+	if (eir_reg & ENC_EIR_TXERIF) {
+		printf ("encPoll: tx error\n");
+		m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
+	}
+
+	/* set global interrupt enable bit in enc28j60 */
+	m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+}
+
+static void encRx (void)
+{
+	unsigned short pkt_len;
+	unsigned short copy_len;
+	unsigned short status;
+	unsigned char eir_reg;
+	unsigned char pkt_cnt = 0;
+
+	/* switch to bank 0 */
+	m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+	m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+	m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+	do {
+		m_nic_read_data (6, buffer);
+		next_pointer_lsb = buffer[0];
+		next_pointer_msb = buffer[1];
+		pkt_len = buffer[2];
+		pkt_len |= (unsigned short) buffer[3] << 8;
+		status = buffer[4];
+		status |= (unsigned short) buffer[5] << 8;
+
+		if (pkt_len <= ENC_MAX_FRM_LEN) {
+			copy_len = pkt_len;
+		} else {
+			copy_len = 0;
+			/*      p_priv->stats.rx_dropped++; */
+			/* we will drop this packet */
+		}
+
+		if ((status & (1L << 7)) == 0) {	/* check Received Ok bit */
+			copy_len = 0;
+			/*      p_priv->stats.rx_errors++; */
+		}
+
+		if (copy_len > 0) {
+			m_nic_read_data (copy_len, buffer);
+		}
+
+		/* advance read pointer to next pointer */
+		m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+		m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+		/* decrease packet counter */
+		m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+
+		/* move to bank 1 */
+		m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+		m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+		/* read pktcnt */
+		pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+		/* switch to bank 0 */
+		m_nic_bfc (CTL_REG_ECON1,
+			   (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+		if (copy_len == 0) {
+			eir_reg = m_nic_read (CTL_REG_EIR);
+			encReceiverReset ();
+			printf ("eth_rx: copy_len=0\n");
+			continue;
+		}
+
+		NetReceive ((unsigned char *) buffer, pkt_len);
+
+		eir_reg = m_nic_read (CTL_REG_EIR);
+	} while (pkt_cnt);	/* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
+	m_nic_write (CTL_REG_ERXRDPTL, next_pointer_lsb);
+	m_nic_write (CTL_REG_ERXRDPTH, next_pointer_msb);
+}
+
+static void encWriteReg (unsigned char regNo, unsigned char data)
+{
+	spi_lock ();
+	enc_cfg_spi ();
+	enc_enable ();
+
+	spi_write (0x40 | regNo);	/* write in regNo */
+	spi_write (data);
+
+	enc_disable ();
+	enc_enable ();
+
+	spi_write (0x1f);	/* write reg 0x1f */
+
+	enc_disable ();
+	spi_unlock ();
+}
+
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+{
+	unsigned char readback;
+	int i;
+
+	spi_lock ();
+
+	for (i = 0; i < c; i++) {
+		enc_cfg_spi ();
+		enc_enable ();
+
+		spi_write (0x40 | regNo);	/* write in regNo */
+		spi_write (data);
+
+		enc_disable ();
+		enc_enable ();
+
+		spi_write (0x1f);	/* write reg 0x1f */
+
+		enc_disable ();
+
+		spi_unlock ();	/* we must unlock spi first */
+
+		readback = encReadReg (regNo);
+
+		spi_lock ();
+
+		if (readback == data)
+			break;
+	}
+	spi_unlock ();
+
+	if (i == c) {
+		printf ("enc28j60: write reg %d failed\n", regNo);
+	}
+}
+
+static unsigned char encReadReg (unsigned char regNo)
+{
+	unsigned char rxByte;
+
+	spi_lock ();
+	enc_cfg_spi ();
+	enc_enable ();
+
+	spi_write (0x1f);	/* read reg 0x1f */
+
+	bank = spi_read () & 0x3;
+
+	enc_disable ();
+	enc_enable ();
+
+	spi_write (regNo);
+	rxByte = spi_read ();
+
+	/* check if MAC or MII register */
+	if (((bank == 2) && (regNo <= 0x1a)) ||
+	    ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
+		/* ignore first byte and read another byte */
+		rxByte = spi_read ();
+	}
+
+	enc_disable ();
+	spi_unlock ();
+
+	return rxByte;
+}
+
+static void encReadBuff (unsigned short length, unsigned char *pBuff)
+{
+	spi_lock ();
+	enc_cfg_spi ();
+	enc_enable ();
+
+	spi_write (0x20 | 0x1a);	/* read buffer memory */
+
+	while (length--) {
+		if (pBuff != NULL)
+			*pBuff++ = spi_read ();
+		else
+			spi_write (0);
+	}
+
+	enc_disable ();
+	spi_unlock ();
+}
+
+static void encWriteBuff (unsigned short length, unsigned char *pBuff)
+{
+	spi_lock ();
+	enc_cfg_spi ();
+	enc_enable ();
+
+	spi_write (0x60 | 0x1a);	/* write buffer memory */
+
+	spi_write (0x00);	/* control byte */
+
+	while (length--)
+		spi_write (*pBuff++);
+
+	enc_disable ();
+	spi_unlock ();
+}
+
+static void encBitSet (unsigned char regNo, unsigned char data)
+{
+	spi_lock ();
+	enc_cfg_spi ();
+	enc_enable ();
+
+	spi_write (0x80 | regNo);	/* bit field set */
+	spi_write (data);
+
+	enc_disable ();
+	spi_unlock ();
+}
+
+static void encBitClr (unsigned char regNo, unsigned char data)
+{
+	spi_lock ();
+	enc_cfg_spi ();
+	enc_enable ();
+
+	spi_write (0xA0 | regNo);	/* bit field clear */
+	spi_write (data);
+
+	enc_disable ();
+	spi_unlock ();
+}
+
+static void encReset (void)
+{
+	spi_lock ();
+	enc_cfg_spi ();
+	enc_enable ();
+
+	spi_write (0xff);	/* soft reset */
+
+	enc_disable ();
+	spi_unlock ();
+
+	/* sleep 1 ms. See errata pt. 2 */
+	udelay (1000);
+
+#if 0
+	(*((volatile unsigned long *) IO1CLR)) &= ENC_RESET;
+	mdelay (5);
+	(*((volatile unsigned long *) IO1SET)) &= ENC_RESET;
+#endif
+}
+
+static void encInit (unsigned char *pEthAddr)
+{
+	unsigned short phid1 = 0;
+	unsigned short phid2 = 0;
+
+	/* switch to bank 0 */
+	m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+	/*
+	 * Setup the buffer space. The reset values are valid for the
+	 * other pointers.
+	 */
+#if 0
+	/* We shall not write to ERXST, see errata pt. 5. Instead we
+	   have to make sure that ENC_RX_BUS_START is 0. */
+	m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
+	m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
+#endif
+	m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
+	m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
+
+	next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
+	next_pointer_msb = (ENC_RX_BUF_START >> 8);
+
+	/*
+	 * For tracking purposes, the ERXRDPT registers should be programmed with
+	 * the same value. This is the read pointer.
+	 */
+	m_nic_write (CTL_REG_ERXRDPTL, (ENC_RX_BUF_START & 0xFF));
+	m_nic_write_retry (CTL_REG_ERXRDPTH, (ENC_RX_BUF_START >> 8), 1);
+
+	/* Setup receive filters. */
+
+	/* move to bank 1 */
+	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+	/* OR-filtering, Unicast, CRC-check and broadcast */
+	m_nic_write_retry (CTL_REG_ERXFCON,
+			   (ENC_RFR_UCEN | ENC_RFR_CRCEN | ENC_RFR_BCEN), 1);
+
+	/* Wait for Oscillator Start-up Timer (OST). */
+	while ((m_nic_read (CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY) == 0) {
+		static int cnt = 0;
+
+		if (cnt++ >= 1000) {
+			cnt = 0;
+		}
+	}
+
+	/* verify identification */
+	phid1 = phyRead (PHY_REG_PHID1);
+	phid2 = phyRead (PHY_REG_PHID2);
+
+	if (phid1 != ENC_PHID1_VALUE
+	    || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
+		printf ("ERROR: failed to identify controller\n");
+		printf ("phid1 = %x, phid2 = %x\n",
+			phid1, (phid2 & ENC_PHID2_MASK));
+		printf ("should be phid1 = %x, phid2 = %x\n",
+			ENC_PHID1_VALUE, ENC_PHID2_VALUE);
+	}
+
+	/*
+	 * --- MAC Initialization ---
+	 */
+
+	/* Pull MAC out of Reset */
+
+	/* switch to bank 2 */
+	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+	/* clear MAC reset bits */
+	m_nic_write_retry (CTL_REG_MACON2, 0, 1);
+
+	/* enable MAC to receive frames */
+	m_nic_write_retry (CTL_REG_MACON1, ENC_MACON1_MARXEN, 10);
+
+	/* configure pad, tx-crc and duplex */
+	/* TODO maybe enable FRMLNEN */
+	m_nic_write_retry (CTL_REG_MACON3,
+			   (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN), 10);
+
+	/* set maximum frame length */
+	m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
+	m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+
+	/*
+	 * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+	 * and 0x15 for full duplex.
+	 */
+	m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+
+	/* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
+	m_nic_write_retry (CTL_REG_MAIPGL, 0x12, 10);
+
+	/*
+	 * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
+	 * 0x0c for half-duplex. Nothing for full-duplex
+	 */
+	m_nic_write_retry (CTL_REG_MAIPGH, 0x0C, 10);
+
+	/* set MAC address */
+
+	/* switch to bank 3 */
+	m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+
+	m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
+	m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
+	m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
+	m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
+	m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
+	m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+
+	/*
+	 * Receive settings
+	 */
+
+	/* auto-increment RX-pointer when reading a received packet */
+	m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_AUTOINC);
+
+	/* enable interrupts */
+	m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
+	m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
+	m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
+	m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
+	m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+}
+
+/*****************************************************************************
+ *
+ * Description:
+ *    Read PHY registers.
+ *
+ *    NOTE! This function will change to Bank 2.
+ *
+ * Params:
+ *    [in] addr address of the register to read
+ *
+ * Returns:
+ *    The value in the register
+ */
+static unsigned short phyRead (unsigned char addr)
+{
+	unsigned short ret = 0;
+
+	/* move to bank 2 */
+	m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+	m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+	/* write address to MIREGADR */
+	m_nic_write (CTL_REG_MIREGADR, addr);
+
+	/* set MICMD.MIIRD */
+	m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+
+	/* poll MISTAT.BUSY bit until operation is complete */
+	while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+		static int cnt = 0;
+
+		if (cnt++ >= 1000) {
+			/* GJ - this seems extremely dangerous! */
+			/* printf("#"); */
+			cnt = 0;
+		}
+	}
+
+	/* clear MICMD.MIIRD */
+	m_nic_write (CTL_REG_MICMD, 0);
+
+	ret = (m_nic_read (CTL_REG_MIRDH) << 8);
+	ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+
+	return ret;
+}
diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c
new file mode 100644
index 0000000..55aaabf
--- /dev/null
+++ b/board/lpc2292sodimm/flash.c
@@ -0,0 +1,476 @@
+/*
+ * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/hardware.h>
+
+/* IAP commands use 32 bytes at the top of CPU internal sram, we
+   use 512 bytes below that */
+#define COPY_BUFFER_LOCATION 0x40003de0
+
+#define IAP_LOCATION 0x7ffffff1
+#define IAP_CMD_PREPARE 50
+#define IAP_CMD_COPY 51
+#define IAP_CMD_ERASE 52
+#define IAP_CMD_CHECK 53
+#define IAP_CMD_ID 54
+#define IAP_CMD_VERSION 55
+#define IAP_CMD_COMPARE 56
+
+#define IAP_RET_CMD_SUCCESS 0
+
+#define SST_BASEADDR 0x80000000
+#define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1)))
+#define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1)))
+
+
+static unsigned long command[5];
+static unsigned long result[2];
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+extern void iap_entry(unsigned long * command, unsigned long * result);
+
+/*-----------------------------------------------------------------------
+ *
+ */
+int get_flash_sector(flash_info_t * info, ulong flash_addr)
+{
+	int i;
+
+	for(i=1; i < (info->sector_count); i++) {
+		if (flash_addr < (info->start[i]))
+			break;
+	}
+
+	return (i-1);
+}
+
+/*-----------------------------------------------------------------------
+ * This function assumes that flash_addr is aligned on 512 bytes boundary
+ * in flash. This function also assumes that prepare have been called
+ * for the sector in question.
+ */
+int copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
+{
+	int first_sector;
+	int last_sector;
+
+	first_sector = get_flash_sector(info, flash_addr);
+	last_sector = get_flash_sector(info, flash_addr + 512 - 1);
+
+	/* prepare sectors for write */
+	command[0] = IAP_CMD_PREPARE;
+	command[1] = first_sector;
+	command[2] = last_sector;
+	iap_entry(command, result);
+	if (result[0] != IAP_RET_CMD_SUCCESS) {
+		printf("IAP prepare failed\n");
+		return ERR_PROG_ERROR;
+	}
+
+	command[0] = IAP_CMD_COPY;
+	command[1] = flash_addr;
+	command[2] = COPY_BUFFER_LOCATION;
+	command[3] = 512;
+	command[4] = CFG_SYS_CLK_FREQ >> 10;
+	iap_entry(command, result);
+	if (result[0] != IAP_RET_CMD_SUCCESS) {
+		printf("IAP copy failed\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ *
+ */
+void write_word_sst(ulong addr, ushort data)
+{
+	ushort tmp;
+
+	*SST_ADDR1 = 0x00AA;
+	*SST_ADDR2 = 0x0055;
+	*SST_ADDR1 = 0x00A0;
+	*((volatile ushort*)addr) = data;
+	/* do data polling */
+	do {
+		tmp = *((volatile ushort*)addr);
+	} while (tmp != data);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+	int j, k;
+	ulong size = 0;
+	ulong flashbase = 0;
+
+	flash_info[0].flash_id = (PHILIPS_LPC2292 & FLASH_VENDMASK);
+	flash_info[0].size = 0x003E000;	/* 256 - 8 KB */
+	flash_info[0].sector_count = 17;
+	memset (flash_info[0].protect, 0, 17);
+	flashbase = 0x00000000;
+	for (j = 0, k = 0; j < 8; j++, k++) {
+		flash_info[0].start[k] = flashbase;
+		flashbase += 0x00002000;
+	}
+	for (j = 0; j < 2; j++, k++) {
+		flash_info[0].start[k] = flashbase;
+		flashbase += 0x00010000;
+	}
+	for (j = 0; j < 7; j++, k++) {
+		flash_info[0].start[k] = flashbase;
+		flashbase += 0x00002000;
+	}
+	size += flash_info[0].size;
+
+	flash_info[1].flash_id = (SST_MANUFACT & FLASH_VENDMASK);
+	flash_info[1].size = 0x00200000; /* 2 MB */
+	flash_info[1].sector_count = 512;
+	memset (flash_info[1].protect, 0, 512);
+	flashbase = SST_BASEADDR;
+	for (j=0; j<512; j++) {
+		flash_info[1].start[j] = flashbase;
+		flashbase += 0x1000;	/* 4 KB sectors */
+	}
+	size += flash_info[1].size;
+
+	/* Protect monitor and environment sectors */
+	flash_protect (FLAG_PROTECT_SET,
+		 0x0,
+		 0x0 + monitor_flash_len - 1,
+		 &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+		 CFG_ENV_ADDR,
+		 CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+		 &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+	int erased = 0;
+	unsigned long j;
+	unsigned long count;
+	unsigned char *p;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (SST_MANUFACT & FLASH_VENDMASK):
+		printf("SST: ");
+		break;
+	case (PHILIPS_LPC2292 & FLASH_VENDMASK):
+		printf("Philips: ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+	  info->size >> 10, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		if (i < (info->sector_count - 1)) {
+			count = info->start[i+1] - info->start[i];
+		}
+		else {
+			count = info->start[0] + info->size - info->start[i];
+		}
+		p = (unsigned char*)(info->start[i]);
+		erased = 1;
+		for (j = 0; j < count; j++) {
+			if (*p != 0xFF) {
+				erased = 0;
+				break;
+			}
+			p++;
+		}
+		printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : "   ",
+			erased ? " E" : "  ");
+	}
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase_philips (flash_info_t * info, int s_first, int s_last)
+{
+	int flag;
+	int prot;
+	int sect;
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot)
+		return ERR_PROTECTED;
+
+
+	flag = disable_interrupts();
+
+	printf ("Erasing %d sectors starting at sector %2d.\n"
+	"This make take some time ... ",
+	s_last - s_first + 1, s_first);
+
+	command[0] = IAP_CMD_PREPARE;
+	command[1] = s_first;
+	command[2] = s_last;
+	iap_entry(command, result);
+	if (result[0] != IAP_RET_CMD_SUCCESS) {
+		printf("IAP prepare failed\n");
+		return ERR_PROTECTED;
+	}
+
+	command[0] = IAP_CMD_ERASE;
+	command[1] = s_first;
+	command[2] = s_last;
+	command[3] = CFG_SYS_CLK_FREQ >> 10;
+	iap_entry(command, result);
+	if (result[0] != IAP_RET_CMD_SUCCESS) {
+		printf("IAP erase failed\n");
+		return ERR_PROTECTED;
+	}
+
+	if (flag)
+		enable_interrupts();
+
+	return ERR_OK;
+}
+
+int flash_erase_sst (flash_info_t * info, int s_first, int s_last)
+{
+	int i;
+
+	for (i = s_first; i <= s_last; i++) {
+		*SST_ADDR1 = 0x00AA;
+		*SST_ADDR2 = 0x0055;
+		*SST_ADDR1 = 0x0080;
+		*SST_ADDR1 = 0x00AA;
+		*SST_ADDR2 = 0x0055;
+		*((volatile ushort*)(info->start[i])) = 0x0030;
+		/* wait for erase to finish */
+		udelay(25000);
+	}
+
+	return ERR_OK;
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	switch (info->flash_id & FLASH_VENDMASK) {
+		case (SST_MANUFACT & FLASH_VENDMASK):
+			return flash_erase_sst(info, s_first, s_last);
+		case (PHILIPS_LPC2292 & FLASH_VENDMASK):
+			return flash_erase_philips(info, s_first, s_last);
+		default:
+			return ERR_PROTECTED;
+	}
+	return ERR_PROTECTED;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ *
+ * cnt is in bytes
+ */
+
+int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ushort tmp;
+	ulong i;
+	uchar* src_org;
+	uchar* dst_org;
+	ulong cnt_org = cnt;
+	int ret = ERR_OK;
+
+	src_org = src;
+	dst_org = (uchar*)addr;
+
+	if (addr & 1) {		/* if odd address */
+		tmp = *((uchar*)(addr - 1)); /* little endian */
+		tmp |= (*src << 8);
+		write_word_sst(addr - 1, tmp);
+		addr += 1;
+		cnt -= 1;
+		src++;
+	}
+	while (cnt > 1) {
+		tmp = ((*(src+1)) << 8) + (*src); /* little endian */
+		write_word_sst(addr, tmp);
+		addr += 2;
+		src += 2;
+		cnt -= 2;
+	}
+	if (cnt > 0) {
+		tmp = (*((uchar*)(addr + 1))) << 8;
+		tmp |= *src;
+		write_word_sst(addr, tmp);
+	}
+
+	for (i = 0; i < cnt_org; i++) {
+		if (*dst_org != *src_org) {
+			printf("Write failed. Byte %lX differs\n", i);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+		dst_org++;
+		src_org++;
+	}
+
+	return ret;
+}
+
+int write_buff_philips (flash_info_t * info,
+			uchar * src,
+			ulong addr,
+			ulong cnt)
+{
+	int first_copy_size;
+	int last_copy_size;
+	int first_block;
+	int last_block;
+	int nbr_mid_blocks;
+	uchar memmap_value;
+	ulong i;
+	uchar* src_org;
+	uchar* dst_org;
+	int ret = ERR_OK;
+
+	src_org = src;
+	dst_org = (uchar*)addr;
+
+	first_block = addr / 512;
+	last_block = (addr + cnt) / 512;
+	nbr_mid_blocks = last_block - first_block - 1;
+
+	first_copy_size = 512 - (addr % 512);
+	last_copy_size = (addr + cnt) % 512;
+
+#if 0
+	printf("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
+		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
+	(ulong)(first_block * 512),
+	(ulong)COPY_BUFFER_LOCATION,
+	(ulong)src,
+	(ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
+	first_copy_size,
+	(ulong)COPY_BUFFER_LOCATION,
+	(ulong)(first_block * 512));
+#endif
+
+	/* copy first block */
+	memcpy((void*)COPY_BUFFER_LOCATION,
+		(void*)(first_block * 512), 512);
+	memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
+		src, first_copy_size);
+	copy_buffer_to_flash(info, first_block * 512);
+	src += first_copy_size;
+	addr += first_copy_size;
+
+	/* copy middle blocks */
+	for (i = 0; i < nbr_mid_blocks; i++) {
+#if 0
+		printf("copy middle block: %lX -> %lX 512 bytes, "
+		"%lX -> %lX 512 bytes\n",
+		(ulong)src,
+		(ulong)COPY_BUFFER_LOCATION,
+		(ulong)COPY_BUFFER_LOCATION,
+		(ulong)addr);
+#endif
+		memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
+		copy_buffer_to_flash(info, addr);
+		src += 512;
+		addr += 512;
+	}
+
+
+	if (last_copy_size > 0) {
+#if 0
+		printf("copy last block: (1) %lX -> %lX 0x200 bytes, "
+		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
+		(ulong)(last_block * 512),
+		(ulong)COPY_BUFFER_LOCATION,
+		(ulong)src,
+		(ulong)(COPY_BUFFER_LOCATION),
+		last_copy_size,
+		(ulong)COPY_BUFFER_LOCATION,
+		(ulong)addr);
+#endif
+		/* copy last block */
+		memcpy((void*)COPY_BUFFER_LOCATION,
+			(void*)(last_block * 512), 512);
+		memcpy((void*)COPY_BUFFER_LOCATION,
+			src, last_copy_size);
+		copy_buffer_to_flash(info, addr);
+	}
+
+	/* verify write */
+	memmap_value = GET8(MEMMAP);
+
+	disable_interrupts();
+
+	PUT8(MEMMAP, 01);		/* we must make sure that initial 64
+							   bytes are taken from flash when we
+							   do the compare */
+
+	for (i = 0; i < cnt; i++) {
+		if (*dst_org != *src_org){
+			printf("Write failed. Byte %lX differs\n", i);
+			ret = ERR_PROG_ERROR;
+			break;
+		}
+		dst_org++;
+		src_org++;
+	}
+
+	PUT8(MEMMAP, memmap_value);
+	enable_interrupts();
+
+	return ret;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	switch (info->flash_id & FLASH_VENDMASK) {
+		case (SST_MANUFACT & FLASH_VENDMASK):
+			return write_buff_sst(info, src, addr, cnt);
+		case (PHILIPS_LPC2292 & FLASH_VENDMASK):
+			return write_buff_philips(info, src, addr, cnt);
+		default:
+			return ERR_PROG_ERROR;
+	}
+	return ERR_PROG_ERROR;
+}
diff --git a/board/lpc2292sodimm/iap_entry.S b/board/lpc2292sodimm/iap_entry.S
new file mode 100644
index 0000000..c31d519
--- /dev/null
+++ b/board/lpc2292sodimm/iap_entry.S
@@ -0,0 +1,7 @@
+IAP_ADDRESS:	.word	0x7FFFFFF1
+
+.globl iap_entry
+iap_entry:
+	ldr	r2, IAP_ADDRESS
+	bx	r2
+	mov	pc, lr
diff --git a/board/lpc2292sodimm/lowlevel_init.S b/board/lpc2292sodimm/lowlevel_init.S
new file mode 100644
index 0000000..a0e9747
--- /dev/null
+++ b/board/lpc2292sodimm/lowlevel_init.S
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/hardware.h>
+
+/* some parameters for the board */
+/* setting up the memory */
+#define 	SRAM_START 	0x40000000
+#define 	SRAM_SIZE	0x00004000
+#define   BCFG0_VALUE 0x1000ffef
+#define   BCFG1_VALUE 0x10001C61
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+MEMMAP_ADR:
+	.word	MEMMAP
+BCFG0_ADR:
+  .word BCFG0
+_BCFG0_VALUE:
+  .word BCFG0_VALUE
+BCFG1_ADR:
+	.word	BCFG1
+_BCFG1_VALUE:
+	.word	BCFG1_VALUE
+PINSEL2_ADR:
+	.word	PINSEL2
+PINSEL2_MASK:
+	.word	0x00000000
+PINSEL2_VALUE:
+	.word	0x0F800914
+
+.extern _start
+
+.globl lowlevel_init
+lowlevel_init:
+	/* set up memory control register for bank 0 */
+	ldr r0, _BCFG0_VALUE
+	ldr r1, BCFG0_ADR
+	str r0, [r1]
+
+	/* set up memory control register for bank 1 */
+	ldr	r0, _BCFG1_VALUE
+	ldr	r1, BCFG1_ADR
+	str	r0, [r1]
+
+	/* set up PINSEL2 for bus-pins */
+	ldr	r0, PINSEL2_ADR
+	ldr	r1, [r0]
+	ldr	r2, PINSEL2_MASK
+	ldr	r3, PINSEL2_VALUE
+	and	r1, r1, r2
+	orr	r1, r1, r3
+	str	r1, [r0]
+
+	/* move vectors to beginning of SRAM */
+	mov	r2, #SRAM_START
+	mov	r0, #0 /*_start*/
+	ldmneia r0!, {r3-r10}
+	stmneia r2!, {r3-r10}
+	ldmneia r0, {r3-r9}
+	stmneia r2, {r3-r9}
+
+	/* Set-up MEMMAP register, so vectors are taken from SRAM */
+	ldr	r0, MEMMAP_ADR
+	mov	r1, #0x02	/* vectors re-mapped to static RAM */
+	str	r1, [r0]
+
+	/* everything is fine now */
+	mov	pc, lr
diff --git a/board/lpc2292sodimm/lpc2292sodimm.c b/board/lpc2292sodimm/lpc2292sodimm.c
new file mode 100644
index 0000000..de04c66
--- /dev/null
+++ b/board/lpc2292sodimm/lpc2292sodimm.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
+ * Armadillo board HT1070
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <clps7111.h>
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* Activate LED flasher */
+	IO_LEDFLSH = 0x40;
+
+	/* arch number MACH_TYPE_ARMADILLO - not official*/
+	gd->bd->bi_arch_number = 83;
+
+	/* location of boot parameters */
+	gd->bd->bi_boot_params = 0xc0000100;
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return (0);
+}
diff --git a/board/lpc2292sodimm/mmc.c b/board/lpc2292sodimm/mmc.c
new file mode 100644
index 0000000..1c0922f
--- /dev/null
+++ b/board/lpc2292sodimm/mmc.c
@@ -0,0 +1,154 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <mmc.h>
+#include <asm/errno.h>
+#include <asm/arch/hardware.h>
+#include <part.h>
+#include <fat.h>
+#include "mmc_hw.h"
+#include "spi.h"
+
+#ifdef CONFIG_MMC
+
+#undef MMC_DEBUG
+
+static block_dev_desc_t mmc_dev;
+
+/* these are filled out by a call to mmc_hw_get_parameters */
+static int hw_size;		/* in kbytes */
+static int hw_nr_sects;
+static int hw_sect_size;	/* in bytes */
+
+block_dev_desc_t * mmc_get_dev(int dev)
+{
+	return (block_dev_desc_t *)(&mmc_dev);
+}
+
+unsigned long mmc_block_read(int dev,
+			     unsigned long start,
+			     lbaint_t blkcnt,
+			     unsigned long *buffer)
+{
+	unsigned long rc = 0;
+	unsigned char *p = (unsigned char *)buffer;
+	unsigned long i;
+	unsigned long addr = start;
+
+#ifdef MMC_DEBUG
+	printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start,
+		 (unsigned long)blkcnt);
+#endif
+
+	for(i = 0; i < (unsigned long)blkcnt; i++) {
+#ifdef MMC_DEBUG
+		printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p);
+#endif
+		(void)mmc_read_sector(addr, p);
+		rc++;
+		addr++;
+		p += hw_sect_size;
+	}
+
+	return rc;
+}
+
+/*-----------------------------------------------------------------------------
+ * Read hardware paramterers (sector size, size, number of sectors)
+ */
+static int mmc_hw_get_parameters(void)
+{
+	unsigned char csddata[16];
+	unsigned int sizemult;
+	unsigned int size;
+
+	mmc_read_csd(csddata);
+	hw_sect_size = 1<<(csddata[5] & 0x0f);
+	size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0);
+	sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1);
+	hw_nr_sects = (size+1)*(1<<(sizemult+2));
+	hw_size = hw_nr_sects*hw_sect_size/1024;
+
+#ifdef MMC_DEBUG
+	printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, "
+		 "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size);
+#endif
+
+	return 0;
+}
+
+int mmc_init(int verbose)
+{
+	int ret = -ENODEV;
+
+	if (verbose)
+		printf("mmc_init\n");
+
+	spi_init();
+	mmc_hw_init();
+
+	mmc_hw_get_parameters();
+
+	mmc_dev.if_type = IF_TYPE_MMC;
+	mmc_dev.part_type = PART_TYPE_DOS;
+	mmc_dev.dev = 0;
+	mmc_dev.lun = 0;
+	mmc_dev.type = 0;
+	mmc_dev.blksz = hw_sect_size;
+	mmc_dev.lba = hw_nr_sects;
+	sprintf((char*)mmc_dev.vendor, "Unknown vendor");
+	sprintf((char*)mmc_dev.product, "Unknown product");
+	sprintf((char*)mmc_dev.revision, "N/A");
+	mmc_dev.removable = 0;	/* should be true??? */
+	mmc_dev.block_read = mmc_block_read;
+
+	fat_register_device(&mmc_dev, 1);
+
+	ret = 0;
+
+	return ret;
+}
+
+int mmc_write(uchar * src, ulong dst, int size)
+{
+#ifdef MMC_DEBUG
+	printf("mmc_write: src=%p, dst=%lu, size=%u\n", src, dst, size);
+#endif
+	/* Since mmc2info always returns 0 this function will never be called */
+	return 0;
+}
+
+int mmc_read(ulong src, uchar * dst, int size)
+{
+#ifdef MMC_DEBUG
+	printf("mmc_read: src=%lu, dst=%p, size=%u\n", src, dst, size);
+#endif
+	/* Since mmc2info always returns 0 this function will never be called */
+	return 0;
+}
+
+int mmc2info(ulong addr)
+{
+	/* This function is used by cmd_cp to determine if source or destination
+	 address resides on MMC-card or not. We do not support copy to and from
+	 MMC-card so we always return 0. */
+	return 0;
+}
+
+#endif /* CONFIG_MMC */
diff --git a/board/lpc2292sodimm/mmc_hw.c b/board/lpc2292sodimm/mmc_hw.c
new file mode 100644
index 0000000..31f2a79
--- /dev/null
+++ b/board/lpc2292sodimm/mmc_hw.c
@@ -0,0 +1,233 @@
+/*
+    This code was original written by Ulrich Radig and modified by
+    Embedded Artists AB (www.embeddedartists.com).
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/arch/hardware.h>
+#include "spi.h"
+
+#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
+#define MMC_Disable() PUT32(IO1SET, 1l << 22)
+#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0);
+
+static unsigned char Write_Command_MMC (unsigned char *CMD);
+static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer,
+		    unsigned short int Bytes);
+
+/* initialize the hardware */
+int mmc_hw_init(void)
+{
+	unsigned long a;
+	unsigned short int Timeout = 0;
+	unsigned char b;
+	unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95};
+
+	/* set-up GPIO and SPI */
+	(*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */
+	(*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */
+
+	MMC_Disable();
+
+	spi_lock();
+	spi_set_clock(248);
+	spi_set_cfg(0, 1, 0);
+	MMC_Enable();
+
+	/* waste some time */
+	for(a=0; a < 20000; a++)
+		asm("nop");
+
+	/* Put the MMC/SD-card into SPI-mode */
+	for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */
+		spi_write(0xff);
+
+	/* Sends command CMD0 to MMC/SD-card */
+	while (Write_Command_MMC(CMD) != 1) {
+		if (Timeout++ > 200) {
+			MMC_Disable();
+			spi_unlock();
+			return(1); /* Abort with command 1 (return 1) */
+		}
+	}
+	/* Sends Command CMD1 an MMC/SD-card */
+	Timeout = 0;
+	CMD[0] = 0x41;/* Command 1 */
+	CMD[5] = 0xFF;
+
+	while (Write_Command_MMC(CMD) != 0) {
+		if (Timeout++ > 200) {
+			MMC_Disable();
+			spi_unlock();
+			return (2); /* Abort with command 2 (return 2) */
+		}
+	}
+
+	MMC_Disable();
+	spi_unlock();
+
+	return 0;
+}
+
+/* ############################################################################
+   Sends a command to the MMC/SD-card
+   ######################################################################### */
+static unsigned char Write_Command_MMC (unsigned char *CMD)
+{
+	unsigned char a, tmp = 0xff;
+	unsigned short int Timeout = 0;
+
+	MMC_Disable();
+	spi_write(0xFF);
+	MMC_Enable();
+
+	for (a = 0; a < 0x06; a++)
+		spi_write(*CMD++);
+
+	while (tmp == 0xff) {
+		tmp = spi_read();
+		if (Timeout++ > 5000)
+		  break;
+	}
+
+	return (tmp);
+}
+
+/* ############################################################################
+   Routine to read the CID register from the MMC/SD-card (16 bytes)
+   ######################################################################### */
+void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short
+	int Bytes)
+{
+	unsigned short int a;
+
+	spi_lock();
+	mmc_spi_cfg();
+	MMC_Enable();
+
+	if (Write_Command_MMC(CMD) != 0) {
+		MMC_Disable();
+		spi_unlock();
+		return;
+	}
+
+	while (spi_read() != 0xfe) {};
+	for (a = 0; a < Bytes; a++)
+		*Buffer++ = spi_read();
+
+	/* Read the CRC-byte */
+	spi_read(); /* CRC - byte is discarded */
+	spi_read(); /* CRC - byte is discarded */
+	/* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */
+	MMC_Disable();
+	spi_unlock();
+
+	return;
+}
+
+/* ############################################################################
+   Routine to read a block (512 bytes) from the MMC/SD-card
+   ######################################################################### */
+unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
+{
+	/* Command 16 to read aBlocks from the MMC/SD - caed */
+	unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
+
+	/* The addres on the MMC/SD-card is in bytes,
+	addr is transformed from blocks to bytes and the result is
+	placed into the command */
+
+	addr = addr << 9; /* addr = addr * 512 */
+
+	CMD[1] = ((addr & 0xFF000000) >> 24);
+	CMD[2] = ((addr & 0x00FF0000) >> 16);
+	CMD[3] = ((addr & 0x0000FF00) >> 8 );
+
+	MMC_Read_Block(CMD, Buffer, 512);
+
+	return (0);
+}
+
+/* ############################################################################
+   Routine to write a block (512 byte) to the MMC/SD-card
+   ######################################################################### */
+unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
+{
+	unsigned char tmp, a;
+	unsigned short int b;
+	/* Command 24 to write a block to the MMC/SD - card */
+	unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
+
+	/* The addres on the MMC/SD-card is in bytes,
+	addr is transformed from blocks to bytes and the result is
+	placed into the command */
+
+	addr = addr << 9; /* addr = addr * 512 */
+
+	CMD[1] = ((addr & 0xFF000000) >> 24);
+	CMD[2] = ((addr & 0x00FF0000) >> 16);
+	CMD[3] = ((addr & 0x0000FF00) >> 8 );
+
+	spi_lock();
+	mmc_spi_cfg();
+	MMC_Enable();
+
+	/* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */
+	tmp = Write_Command_MMC(CMD);
+	if (tmp != 0) {
+		MMC_Disable();
+		spi_unlock();
+		return(tmp);
+	}
+
+	/* Do a short delay and send a clock-pulse to the MMC/SD-card */
+	for (a = 0; a < 100; a++)
+		spi_read();
+
+	/* Send a start byte to the MMC/SD-card */
+	spi_write(0xFE);
+
+	/* Write the block (512 bytes) to the MMC/SD-card */
+	for (b = 0; b < 512; b++)
+		spi_write(*Buffer++);
+
+	/* write the CRC-Byte */
+	spi_write(0xFF); /* write a dummy CRC */
+	spi_write(0xFF); /* CRC code is not used */
+
+	/* Wait for MMC/SD-card busy */
+	while (spi_read() != 0xff) {};
+
+	/* set MMC_Chip_Select to high (MMC/SD-card inactive) */
+	MMC_Disable();
+	spi_unlock();
+	return (0);
+}
+
+/* #########################################################################
+   Routine to read the CSD register from the MMC/SD-card (16 bytes)
+   ######################################################################### */
+unsigned char mmc_read_csd (unsigned char *Buffer)
+{
+	/* Command to read the CSD register */
+	unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF};
+
+	MMC_Read_Block(CMD, Buffer, 16);
+
+	return (0);
+}
diff --git a/board/lpc2292sodimm/mmc_hw.h b/board/lpc2292sodimm/mmc_hw.h
new file mode 100644
index 0000000..3687dbf
--- /dev/null
+++ b/board/lpc2292sodimm/mmc_hw.h
@@ -0,0 +1,29 @@
+/*
+    This module implements a linux character device driver for the 24c256 chip.
+    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef _MMC_HW_
+#define _MMC_HW_
+
+unsigned char mmc_read_csd(unsigned char *Buffer);
+unsigned char mmc_read_sector (unsigned long addr,
+			       unsigned char *Buffer);
+unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer);
+int mmc_hw_init(void);
+
+#endif /* _MMC_HW_ */
diff --git a/board/lpc2292sodimm/spi.c b/board/lpc2292sodimm/spi.c
new file mode 100644
index 0000000..4ba1468
--- /dev/null
+++ b/board/lpc2292sodimm/spi.c
@@ -0,0 +1,40 @@
+/*
+    This module implements an interface to the SPI on the lpc22xx.
+    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/arch/hardware.h>
+#include "spi.h"
+
+unsigned long spi_flags;
+unsigned char spi_idle = 0x00;
+
+int spi_init(void)
+{
+	unsigned long pinsel0_value;
+
+	/* activate spi pins */
+	pinsel0_value = GET32(PINSEL0);
+	pinsel0_value &= ~(0xFFl << 8);
+	pinsel0_value |= (0x55l << 8);
+	PUT32(PINSEL0, pinsel0_value);
+
+	return 0;
+}
diff --git a/board/lpc2292sodimm/spi.h b/board/lpc2292sodimm/spi.h
new file mode 100644
index 0000000..6ae66e8
--- /dev/null
+++ b/board/lpc2292sodimm/spi.h
@@ -0,0 +1,82 @@
+/*
+    This file defines the interface to the lpc22xx SPI module.
+    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
+
+    This file may be included in software not adhering to the GPL.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef SPI_H
+#define SPI_H
+
+#include <config.h>
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/arch/hardware.h>
+
+#define SPIF 0x80
+
+#define spi_lock() disable_interrupts();
+#define spi_unlock() enable_interrupts();
+
+extern unsigned long spi_flags;
+extern unsigned char spi_idle;
+
+int spi_init(void);
+
+static inline unsigned char spi_read(void)
+{
+	unsigned char b;
+
+	PUT8(S0SPDR, spi_idle);
+	while (!(GET8(S0SPSR) & SPIF));
+	b = GET8(S0SPDR);
+
+	return b;
+}
+
+static inline void spi_write(unsigned char b)
+{
+	PUT8(S0SPDR, b);
+	while (!(GET8(S0SPSR) & SPIF));
+	GET8(S0SPDR);		/* this will clear the SPIF bit */
+}
+
+static inline void spi_set_clock(unsigned char clk_value)
+{
+	PUT8(S0SPCCR, clk_value);
+}
+
+static inline void spi_set_cfg(unsigned char phase,
+			       unsigned char polarity,
+			       unsigned char lsbf)
+{
+	unsigned char v = 0x20;	/* master bit set */
+
+	if (phase)
+		v |= 0x08;			/* set phase bit */
+	if (polarity) {
+		v |= 0x10;			/* set polarity bit */
+		spi_idle = 0xFF;
+	} else {
+		spi_idle = 0x00;
+	}
+	if (lsbf)
+		v |= 0x40;			/* set lsbf bit */
+
+	PUT8(S0SPCR, v);
+}
+#endif /* SPI_H */
diff --git a/board/lpc2292sodimm/u-boot.lds b/board/lpc2292sodimm/u-boot.lds
new file mode 100644
index 0000000..64d946c
--- /dev/null
+++ b/board/lpc2292sodimm/u-boot.lds
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm720t/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}