Blackfin: BF537-stamp: cleanup spi flash driver

This punts the old spi flash driver for a new/generalized one until the
common one can be integrated.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

6 files changed, 819 insertions, 992 deletions

diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile
index 02c941b..14bb7a2 100644
--- a/board/bf533-stamp/Makefile
+++ b/board/bf533-stamp/Makefile
@@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o spi.o
+COBJS	:= $(BOARD).o spi_flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/bf533-stamp/spi.c b/board/bf533-stamp/spi.c
deleted file mode 100644
index 15141cf..0000000
--- a/board/bf533-stamp/spi.c
+++ /dev/null
@@ -1,474 +0,0 @@
-/****************************************************************************
- *  SPI flash driver for M25P64
- ****************************************************************************/
-#include <common.h>
-#include <linux/ctype.h>
-#include <asm/io.h>
-#include <asm/mach-common/bits/spi.h>
-
-#if defined(CONFIG_SPI)
-
- /*Application definitions */
-
-#define	NUM_SECTORS 	128	/* number of sectors */
-#define SECTOR_SIZE		0x10000
-#define NOP_NUM		1000
-
-#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL)	/*Settings to the SPI_CTL */
-#define TIMOD01 (0x01)		/*stes the SPI to work with core instructions */
-
- /*Flash commands */
-#define SPI_WREN	(0x06)	/*Set Write Enable Latch */
-#define SPI_WRDI	(0x04)	/*Reset Write Enable Latch */
-#define SPI_RDSR	(0x05)	/*Read Status Register */
-#define SPI_WRSR	(0x01)	/*Write Status Register */
-#define SPI_READ	(0x03)	/*Read data from memory */
-#define SPI_PP  	(0x02)	/*Program Data into memory */
-#define SPI_SE  	(0xD8)	/*Erase one sector in memory */
-#define SPI_BE		(0xC7)	/*Erase all memory */
-#define WIP		(0x1)	/*Check the write in progress bit of the SPI status register */
-#define WEL		(0x2)	/*Check the write enable bit of the SPI status register */
-
-#define TIMEOUT 350000000
-
-typedef enum {
-	NO_ERR,
-	POLL_TIMEOUT,
-	INVALID_SECTOR,
-	INVALID_BLOCK,
-} ERROR_CODE;
-
-void spi_init_f(void);
-void spi_init_r(void);
-ssize_t spi_read(uchar *, int, uchar *, int);
-ssize_t spi_write(uchar *, int, uchar *, int);
-
-char ReadStatusRegister(void);
-void Wait_For_SPIF(void);
-void SetupSPI(const int spi_setting);
-void SPI_OFF(void);
-void SendSingleCommand(const int iCommand);
-
-ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector);
-ERROR_CODE EraseBlock(int nBlock);
-ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData);
-ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData);
-ERROR_CODE Wait_For_Status(char Statusbit);
-ERROR_CODE Wait_For_WEL(void);
-
-/* -------------------
- * Variables
- * ------------------- */
-
-/* **************************************************************************
- *
- *  Function:    spi_init_f
- *
- *  Description: Init SPI-Controller (ROM part)
- *
- *  return:      ---
- *
- * *********************************************************************** */
-void spi_init_f(void)
-{
-}
-
-/* **************************************************************************
- *
- *  Function:    spi_init_r
- *
- *  Description: Init SPI-Controller (RAM part) -
- *		 The malloc engine is ready and we can move our buffers to
- *		 normal RAM
- *
- *  return:      ---
- *
- * *********************************************************************** */
-void spi_init_r(void)
-{
-	return;
-}
-
-/****************************************************************************
- *  Function:    spi_write
- **************************************************************************** */
-ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len)
-{
-	unsigned long offset;
-	int start_block, end_block;
-	int start_byte, end_byte;
-	ERROR_CODE result = NO_ERR;
-	uchar temp[SECTOR_SIZE];
-	int i, num;
-
-	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
-	/* Get the start block number */
-	result = GetSectorNumber(offset, &start_block);
-	if (result == INVALID_SECTOR) {
-		printf("Invalid sector! ");
-		return 0;
-	}
-	/* Get the end block number */
-	result = GetSectorNumber(offset + len - 1, &end_block);
-	if (result == INVALID_SECTOR) {
-		printf("Invalid sector! ");
-		return 0;
-	}
-
-	for (num = start_block; num <= end_block; num++) {
-		ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
-		start_byte = num * SECTOR_SIZE;
-		end_byte = (num + 1) * SECTOR_SIZE - 1;
-		if (start_byte < offset)
-			start_byte = offset;
-		if (end_byte > (offset + len))
-			end_byte = (offset + len - 1);
-		for (i = start_byte; i <= end_byte; i++)
-			temp[i - num * SECTOR_SIZE] = buffer[i - offset];
-		EraseBlock(num);
-		result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
-		if (result != NO_ERR)
-			return 0;
-		printf(".");
-	}
-	return len;
-}
-
-/****************************************************************************
- *  Function:    spi_read
- **************************************************************************** */
-ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len)
-{
-	unsigned long offset;
-	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
-	ReadData(offset, len, (int *)buffer);
-	return len;
-}
-
-void SendSingleCommand(const int iCommand)
-{
-	unsigned short dummy;
-
-	/*turns on the SPI in single write mode */
-	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
-
-	/*sends the actual command to the SPI TX register */
-	*pSPI_TDBR = iCommand;
-	SSYNC();
-
-	/*The SPI status register will be polled to check the SPIF bit */
-	Wait_For_SPIF();
-
-	dummy = *pSPI_RDBR;
-
-	/*The SPI will be turned off */
-	SPI_OFF();
-
-}
-
-void SetupSPI(const int spi_setting)
-{
-
-	if (icache_status() || dcache_status())
-		udelay(CONFIG_CCLK_HZ / 50000000);
-	/*sets up the PF2 to be the slave select of the SPI */
-	*pSPI_FLG = 0xFB04;
-	*pSPI_BAUD = CONFIG_SPI_BAUD;
-	*pSPI_CTL = spi_setting;
-	SSYNC();
-}
-
-void SPI_OFF(void)
-{
-
-	*pSPI_CTL = 0x0400;	/* disable SPI */
-	*pSPI_FLG = 0;
-	*pSPI_BAUD = 0;
-	SSYNC();
-	udelay(CONFIG_CCLK_HZ / 50000000);
-
-}
-
-void Wait_For_SPIF(void)
-{
-	unsigned short dummyread;
-	while ((*pSPI_STAT & TXS)) ;
-	while (!(*pSPI_STAT & SPIF)) ;
-	while (!(*pSPI_STAT & RXS)) ;
-	dummyread = *pSPI_RDBR;	/* Read dummy to empty the receive register      */
-
-}
-
-ERROR_CODE Wait_For_WEL(void)
-{
-	int i;
-	char status_register = 0;
-	ERROR_CODE ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
-
-	for (i = 0; i < TIMEOUT; i++) {
-		status_register = ReadStatusRegister();
-		if ((status_register & WEL)) {
-			ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
-			break;
-		}
-		ErrorCode = POLL_TIMEOUT;	/* Time out error */
-	};
-
-	return ErrorCode;
-}
-
-ERROR_CODE Wait_For_Status(char Statusbit)
-{
-	int i;
-	char status_register = 0xFF;
-	ERROR_CODE ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
-
-	for (i = 0; i < TIMEOUT; i++) {
-		status_register = ReadStatusRegister();
-		if (!(status_register & Statusbit)) {
-			ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
-			break;
-		}
-		ErrorCode = POLL_TIMEOUT;	/* Time out error */
-	};
-
-	return ErrorCode;
-}
-
-char ReadStatusRegister(void)
-{
-	char status_register = 0;
-
-	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));	/* Turn on the SPI */
-
-	*pSPI_TDBR = SPI_RDSR;	/* send instruction to read status register */
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the instruction has been sent */
-	*pSPI_TDBR = 0;		/*send dummy to receive the status register */
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the data has been sent */
-	status_register = *pSPI_RDBR;	/*read the status register */
-
-	SPI_OFF();		/* Turn off the SPI */
-
-	return status_register;
-}
-
-ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector)
-{
-	int nSector = 0;
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) {
-		ErrorCode = INVALID_SECTOR;
-		return ErrorCode;
-	}
-
-	nSector = (int)ulOffset / 0x10000;
-	*pnSector = nSector;
-
-	/* ok */
-	return ErrorCode;
-}
-
-ERROR_CODE EraseBlock(int nBlock)
-{
-	unsigned long ulSectorOff = 0x0, ShiftValue;
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	/* if the block is invalid just return */
-	if ((nBlock < 0) || (nBlock > NUM_SECTORS)) {
-		ErrorCode = INVALID_BLOCK;	/* tells us if there was an error erasing flash */
-		return ErrorCode;
-	}
-	/* figure out the offset of the block in flash */
-	if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) {
-		ulSectorOff = (nBlock * SECTOR_SIZE);
-
-	} else {
-		ErrorCode = INVALID_BLOCK;	/* tells us if there was an error erasing flash */
-		return ErrorCode;
-	}
-
-	/* A write enable instruction must previously have been executed */
-	SendSingleCommand(SPI_WREN);
-
-	/*The status register will be polled to check the write enable latch "WREN" */
-	ErrorCode = Wait_For_WEL();
-
-	if (POLL_TIMEOUT == ErrorCode) {
-		printf("SPI Erase block error\n");
-		return ErrorCode;
-	} else
-		/*Turn on the SPI to send single commands */
-		SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
-
-	/* Send the erase block command to the flash followed by the 24 address  */
-	/* to point to the start of a sector. */
-	*pSPI_TDBR = SPI_SE;
-	SSYNC();
-	Wait_For_SPIF();
-	ShiftValue = (ulSectorOff >> 16);	/* Send the highest byte of the 24 bit address at first */
-	*pSPI_TDBR = ShiftValue;
-	SSYNC();
-	Wait_For_SPIF();	/* Wait until the instruction has been sent */
-	ShiftValue = (ulSectorOff >> 8);	/* Send the middle byte of the 24 bit address  at second */
-	*pSPI_TDBR = ShiftValue;
-	SSYNC();
-	Wait_For_SPIF();	/* Wait until the instruction has been sent */
-	*pSPI_TDBR = ulSectorOff;	/* Send the lowest byte of the 24 bit address finally */
-	SSYNC();
-	Wait_For_SPIF();	/* Wait until the instruction has been sent */
-
-	/*Turns off the SPI */
-	SPI_OFF();
-
-	/* Poll the status register to check the Write in Progress bit */
-	/* Sector erase takes time */
-	ErrorCode = Wait_For_Status(WIP);
-
-	/* block erase should be complete */
-	return ErrorCode;
-}
-
-/*****************************************************************************
-* ERROR_CODE ReadData()
-*
-* Read a value from flash for verify purpose
-*
-* Inputs:	unsigned long ulStart - holds the SPI start address
-*			int pnData - pointer to store value read from flash
-*			long lCount - number of elements to read
-***************************************************************************** */
-ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData)
-{
-	unsigned long ShiftValue;
-	char *cnData;
-	int i;
-
-	cnData = (char *)pnData;	/* Pointer cast to be able to increment byte wise */
-
-	/* Start SPI interface   */
-	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
-
-	*pSPI_TDBR = SPI_READ;	/* Send the read command to SPI device */
-	SSYNC();
-	Wait_For_SPIF();	/* Wait until the instruction has been sent */
-	ShiftValue = (ulStart >> 16);	/* Send the highest byte of the 24 bit address at first */
-	*pSPI_TDBR = ShiftValue;	/* Send the byte to the SPI device */
-	SSYNC();
-	Wait_For_SPIF();	/* Wait until the instruction has been sent */
-	ShiftValue = (ulStart >> 8);	/* Send the middle byte of the 24 bit address  at second */
-	*pSPI_TDBR = ShiftValue;	/* Send the byte to the SPI device */
-	SSYNC();
-	Wait_For_SPIF();	/* Wait until the instruction has been sent */
-	*pSPI_TDBR = ulStart;	/* Send the lowest byte of the 24 bit address finally */
-	SSYNC();
-	Wait_For_SPIF();	/* Wait until the instruction has been sent */
-
-	/* After the SPI device address has been placed on the MOSI pin the data can be */
-	/* received on the MISO pin. */
-	for (i = 0; i < lCount; i++) {
-		*pSPI_TDBR = 0;	/*send dummy */
-		SSYNC();
-		while (!(*pSPI_STAT & RXS)) ;
-		*cnData++ = *pSPI_RDBR;	/*read  */
-
-		if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0))
-			printf(".");
-	}
-
-	SPI_OFF();		/* Turn off the SPI */
-
-	return NO_ERR;
-}
-
-ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount,
-		      int *iDataSource, long *lWriteCount)
-{
-
-	unsigned long ulWAddr;
-	long lWTransferCount = 0;
-	int i;
-	char iData;
-	char *temp = (char *)iDataSource;
-	ERROR_CODE ErrorCode = NO_ERR;	/* tells us if there was an error erasing flash */
-
-	/* First, a Write Enable Command must be sent to the SPI. */
-	SendSingleCommand(SPI_WREN);
-
-	/* Second, the SPI Status Register will be tested whether the  */
-	/*         Write Enable Bit has been set.  */
-	ErrorCode = Wait_For_WEL();
-	if (POLL_TIMEOUT == ErrorCode) {
-		printf("SPI Write Time Out\n");
-		return ErrorCode;
-	} else
-		/* Third, the 24 bit address will be shifted out the SPI MOSI bytewise. */
-		SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));	/* Turns the SPI on */
-	*pSPI_TDBR = SPI_PP;
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the instruction has been sent */
-	ulWAddr = (ulStartAddr >> 16);
-	*pSPI_TDBR = ulWAddr;
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the instruction has been sent */
-	ulWAddr = (ulStartAddr >> 8);
-	*pSPI_TDBR = ulWAddr;
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the instruction has been sent */
-	ulWAddr = ulStartAddr;
-	*pSPI_TDBR = ulWAddr;
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the instruction has been sent */
-	/* Fourth, maximum number of 256 bytes will be taken from the Buffer */
-	/* and sent to the SPI device. */
-	for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) {
-		iData = *temp;
-		*pSPI_TDBR = iData;
-		SSYNC();
-		Wait_For_SPIF();	/*wait until the instruction has been sent */
-		temp++;
-	}
-
-	SPI_OFF();		/* Turns the SPI off */
-
-	/* Sixth, the SPI Write in Progress Bit must be toggled to ensure the  */
-	/* programming is done before start of next transfer. */
-	ErrorCode = Wait_For_Status(WIP);
-
-	if (POLL_TIMEOUT == ErrorCode) {
-		printf("SPI Program Time out!\n");
-		return ErrorCode;
-	} else
-
-		*lWriteCount = lWTransferCount;
-
-	return ErrorCode;
-}
-
-ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData)
-{
-
-	unsigned long ulWStart = ulStart;
-	long lWCount = lCount, lWriteCount;
-	long *pnWriteCount = &lWriteCount;
-
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	while (lWCount != 0) {
-		ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount);
-
-		/* After each function call of WriteFlash the counter must be adjusted */
-		lWCount -= *pnWriteCount;
-
-		/* Also, both address pointers must be recalculated. */
-		ulWStart += *pnWriteCount;
-		pnData += *pnWriteCount / 4;
-	}
-
-	/* return the appropriate error code */
-	return ErrorCode;
-}
-
-#endif				/* CONFIG_SPI */
diff --git a/board/bf533-stamp/spi_flash.c b/board/bf533-stamp/spi_flash.c
new file mode 100644
index 0000000..8784741
--- /dev/null
+++ b/board/bf533-stamp/spi_flash.c
@@ -0,0 +1,2 @@
+/* Share the spi flash code */
+#include "../bf537-stamp/spi_flash.c"
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index 5d22393..53261549 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o
+COBJS	:= $(BOARD).o post-memory.o spi_flash.o cmd_bf537led.o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/bf537-stamp/spi_flash.c b/board/bf537-stamp/spi_flash.c
new file mode 100644
index 0000000..7c73ddd
--- /dev/null
+++ b/board/bf537-stamp/spi_flash.c
@@ -0,0 +1,815 @@
+/*
+ * SPI flash driver
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (c) 2005-2007 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+/* Configuration options:
+ * CONFIG_SPI_BAUD - value to load into SPI_BAUD (divisor of SCLK to get SPI CLK)
+ * CONFIG_SPI_FLASH_SLOW_READ - force usage of the slower read
+ *		WARNING: make sure your SCLK + SPI_BAUD is slow enough
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/mach-common/bits/spi.h>
+
+/* Forcibly phase out these */
+#ifdef CONFIG_SPI_FLASH_NUM_SECTORS
+# error do not set CONFIG_SPI_FLASH_NUM_SECTORS
+#endif
+#ifdef CONFIG_SPI_FLASH_SECTOR_SIZE
+# error do not set CONFIG_SPI_FLASH_SECTOR_SIZE
+#endif
+
+#if defined(CONFIG_SPI)
+
+struct flash_info {
+	char     *name;
+	uint16_t id;
+	unsigned sector_size;
+	unsigned num_sectors;
+};
+
+/* SPI Speeds: 50 MHz / 33 MHz */
+static struct flash_info flash_spansion_serial_flash[] = {
+	{ "S25FL016", 0x0215, 64 * 1024, 32 },
+	{ "S25FL032", 0x0216, 64 * 1024, 64 },
+	{ "S25FL064", 0x0217, 64 * 1024, 128 },
+	{ "S25FL0128", 0x0218, 256 * 1024, 64 },
+	{ NULL, 0, 0, 0 }
+};
+
+/* SPI Speeds: 50 MHz / 20 MHz */
+static struct flash_info flash_st_serial_flash[] = {
+	{ "m25p05", 0x2010, 32 * 1024, 2 },
+	{ "m25p10", 0x2011, 32 * 1024, 4 },
+	{ "m25p20", 0x2012, 64 * 1024, 4 },
+	{ "m25p40", 0x2013, 64 * 1024, 8 },
+	{ "m25p16", 0x2015, 64 * 1024, 32 },
+	{ "m25p32", 0x2016, 64 * 1024, 64 },
+	{ "m25p64", 0x2017, 64 * 1024, 128 },
+	{ "m25p128", 0x2018, 256 * 1024, 64 },
+	{ NULL, 0, 0, 0 }
+};
+
+/* SPI Speeds: 66 MHz / 33 MHz */
+static struct flash_info flash_atmel_dataflash[] = {
+	{ "AT45DB011x", 0x0c, 264, 512 },
+	{ "AT45DB021x", 0x14, 264, 1025 },
+	{ "AT45DB041x", 0x1c, 264, 2048 },
+	{ "AT45DB081x", 0x24, 264, 4096 },
+	{ "AT45DB161x", 0x2c, 528, 4096 },
+	{ "AT45DB321x", 0x34, 528, 8192 },
+	{ "AT45DB642x", 0x3c, 1056, 8192 },
+	{ NULL, 0, 0, 0 }
+};
+
+/* SPI Speed: 50 MHz / 25 MHz or 40 MHz / 20 MHz */
+static struct flash_info flash_winbond_serial_flash[] = {
+	{ "W25X10", 0x3011, 16 * 256, 32 },
+	{ "W25X20", 0x3012, 16 * 256, 64 },
+	{ "W25X40", 0x3013, 16 * 256, 128 },
+	{ "W25X80", 0x3014, 16 * 256, 256 },
+	{ "W25P80", 0x2014, 256 * 256, 16 },
+	{ "W25P16", 0x2015, 256 * 256, 32 },
+	{ NULL, 0, 0, 0 }
+};
+
+struct flash_ops {
+	uint8_t read, write, erase, status;
+};
+
+#ifdef CONFIG_SPI_FLASH_SLOW_READ
+# define OP_READ 0x03
+#else
+# define OP_READ 0x0B
+#endif
+static struct flash_ops flash_st_ops = {
+	.read = OP_READ,
+	.write = 0x02,
+	.erase = 0xD8,
+	.status = 0x05,
+};
+
+static struct flash_ops flash_atmel_ops = {
+	.read = OP_READ,
+	.write = 0x82,
+	.erase = 0x81,
+	.status = 0xD7,
+};
+
+static struct flash_ops flash_winbond_ops = {
+	.read = OP_READ,
+	.write = 0x02,
+	.erase = 0x20,
+	.status = 0x05,
+};
+
+struct manufacturer_info {
+	const char *name;
+	uint8_t id;
+	struct flash_info *flashes;
+	struct flash_ops *ops;
+};
+
+static struct {
+	struct manufacturer_info *manufacturer;
+	struct flash_info *flash;
+	struct flash_ops *ops;
+	uint8_t manufacturer_id, device_id1, device_id2;
+	unsigned int write_length;
+	unsigned long sector_size, num_sectors;
+} flash;
+
+enum {
+	JED_MANU_SPANSION = 0x01,
+	JED_MANU_ST       = 0x20,
+	JED_MANU_ATMEL    = 0x1F,
+	JED_MANU_WINBOND  = 0xEF,
+};
+
+static struct manufacturer_info flash_manufacturers[] = {
+	{
+		.name = "Spansion",
+		.id = JED_MANU_SPANSION,
+		.flashes = flash_spansion_serial_flash,
+		.ops = &flash_st_ops,
+	},
+	{
+		.name = "ST",
+		.id = JED_MANU_ST,
+		.flashes = flash_st_serial_flash,
+		.ops = &flash_st_ops,
+	},
+	{
+		.name = "Atmel",
+		.id = JED_MANU_ATMEL,
+		.flashes = flash_atmel_dataflash,
+		.ops = &flash_atmel_ops,
+	},
+	{
+		.name = "Winbond",
+		.id = JED_MANU_WINBOND,
+		.flashes = flash_winbond_serial_flash,
+		.ops = &flash_winbond_ops,
+	},
+};
+
+#define	TIMEOUT	5000	/* timeout of 5 seconds */
+
+/* BF54x support */
+#ifndef pSPI_CTL
+# define pSPI_CTL  pSPI0_CTL
+# define pSPI_BAUD pSPI0_BAUD
+# define pSPI_FLG  pSPI0_FLG
+# define pSPI_RDBR pSPI0_RDBR
+# define pSPI_STAT pSPI0_STAT
+# define pSPI_TDBR pSPI0_TDBR
+# define SPI0_SCK	0x0001
+# define SPI0_MOSI	0x0004
+# define SPI0_MISO	0x0002
+# define SPI0_SEL1	0x0010
+#endif
+
+/* Default to the SPI SSEL that we boot off of:
+ *	BF54x, BF537, (everything new?): SSEL1
+ *	BF533, BF561: SSEL2
+ */
+#ifndef CONFIG_SPI_FLASH_SSEL
+# if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \
+     defined(__ADSPBF533__) || defined(__ADSPBF561__)
+#  define CONFIG_SPI_FLASH_SSEL 2
+# else
+#  define CONFIG_SPI_FLASH_SSEL 1
+# endif
+#endif
+#define SSEL_MASK (1 << CONFIG_SPI_FLASH_SSEL)
+
+static void SPI_INIT(void)
+{
+	/* [#3541] This delay appears to be necessary, but not sure
+	 * exactly why as the history behind it is non-existant.
+	 */
+	udelay(CONFIG_CCLK_HZ / 25000000);
+
+	/* enable SPI pins: SSEL, MOSI, MISO, SCK */
+#ifdef __ADSPBF54x__
+	*pPORTE_FER |= (SPI0_SCK | SPI0_MOSI | SPI0_MISO | SPI0_SEL1);
+#elif defined(__ADSPBF534__) || defined(__ADSPBF536__) || defined(__ADSPBF537__)
+	*pPORTF_FER |= (PF10 | PF11 | PF12 | PF13);
+#elif defined(__ADSPBF52x__)
+	bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & ~PORT_x_MUX_0_MASK) | PORT_x_MUX_0_FUNC_3);
+	bfin_write_PORTG_FER(bfin_read_PORTG_FER() | PG1 | PG2 | PG3 | PG4);
+#endif
+
+	/* initate communication upon write of TDBR */
+	*pSPI_CTL = (SPE|MSTR|CPHA|CPOL|0x01);
+	*pSPI_BAUD = CONFIG_SPI_BAUD;
+}
+
+static void SPI_DEINIT(void)
+{
+	/* put SPI settings back to reset state */
+	*pSPI_CTL = 0x0400;
+	*pSPI_BAUD = 0;
+	SSYNC();
+}
+
+static void SPI_ON(void)
+{
+	/* toggle SSEL to reset the device so it'll take a new command */
+	*pSPI_FLG = 0xFF00 | SSEL_MASK;
+	SSYNC();
+
+	*pSPI_FLG = ((0xFF & ~SSEL_MASK) << 8) | SSEL_MASK;
+	SSYNC();
+}
+
+static void SPI_OFF(void)
+{
+	/* put SPI settings back to reset state */
+	*pSPI_FLG = 0xFF00;
+	SSYNC();
+}
+
+static uint8_t spi_write_read_byte(uint8_t transmit)
+{
+	*pSPI_TDBR = transmit;
+	SSYNC();
+
+	while ((*pSPI_STAT & TXS))
+		if (ctrlc())
+			break;
+	while (!(*pSPI_STAT & SPIF))
+		if (ctrlc())
+			break;
+	while (!(*pSPI_STAT & RXS))
+		if (ctrlc())
+			break;
+
+	/* Read dummy to empty the receive register */
+	return *pSPI_RDBR;
+}
+
+static uint8_t read_status_register(void)
+{
+	uint8_t status_register;
+
+	/* send instruction to read status register */
+	SPI_ON();
+	spi_write_read_byte(flash.ops->status);
+	/* send dummy to receive the status register */
+	status_register = spi_write_read_byte(0);
+	SPI_OFF();
+
+	return status_register;
+}
+
+static int wait_for_ready_status(void)
+{
+	ulong start = get_timer(0);
+
+	while (get_timer(0) - start < TIMEOUT) {
+		switch (flash.manufacturer_id) {
+		case JED_MANU_SPANSION:
+		case JED_MANU_ST:
+		case JED_MANU_WINBOND:
+			if (!(read_status_register() & 0x01))
+				return 0;
+			break;
+
+		case JED_MANU_ATMEL:
+			if (read_status_register() & 0x80)
+				return 0;
+			break;
+		}
+
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			return -1;
+		}
+	}
+
+	puts("Timeout\n");
+	return -1;
+}
+
+/* Request and read the manufacturer and device id of parts which
+ * are compatible with the JEDEC standard (JEP106) and use that to
+ * setup other operating conditions.
+ */
+static int spi_detect_part(void)
+{
+	uint16_t dev_id;
+	size_t i;
+
+	static char called_init;
+	if (called_init)
+		return 0;
+
+	SPI_ON();
+
+	/* Send the request for the part identification */
+	spi_write_read_byte(0x9F);
+
+	/* Now read in the manufacturer id bytes */
+	do {
+		flash.manufacturer_id = spi_write_read_byte(0);
+		if (flash.manufacturer_id == 0x7F)
+			puts("Warning: unhandled manufacturer continuation byte!\n");
+	} while (flash.manufacturer_id == 0x7F);
+
+	/* Now read in the first device id byte */
+	flash.device_id1 = spi_write_read_byte(0);
+
+	/* Now read in the second device id byte */
+	flash.device_id2 = spi_write_read_byte(0);
+
+	SPI_OFF();
+
+	dev_id = (flash.device_id1 << 8) | flash.device_id2;
+
+	for (i = 0; i < ARRAY_SIZE(flash_manufacturers); ++i) {
+		if (flash.manufacturer_id == flash_manufacturers[i].id)
+			break;
+	}
+	if (i == ARRAY_SIZE(flash_manufacturers))
+		goto unknown;
+
+	flash.manufacturer = &flash_manufacturers[i];
+	flash.ops = flash_manufacturers[i].ops;
+
+	switch (flash.manufacturer_id) {
+	case JED_MANU_SPANSION:
+	case JED_MANU_ST:
+	case JED_MANU_WINBOND:
+		for (i = 0; flash.manufacturer->flashes[i].name; ++i) {
+			if (dev_id == flash.manufacturer->flashes[i].id)
+				break;
+		}
+		if (!flash.manufacturer->flashes[i].name)
+			goto unknown;
+
+		flash.flash = &flash.manufacturer->flashes[i];
+		flash.sector_size = flash.flash->sector_size;
+		flash.num_sectors = flash.flash->num_sectors;
+		flash.write_length = 256;
+		break;
+
+	case JED_MANU_ATMEL: {
+		uint8_t status = read_status_register();
+
+		for (i = 0; flash.manufacturer->flashes[i].name; ++i) {
+			if ((status & 0x3c) == flash.manufacturer->flashes[i].id)
+				break;
+		}
+		if (!flash.manufacturer->flashes[i].name)
+			goto unknown;
+
+		flash.flash = &flash.manufacturer->flashes[i];
+		flash.sector_size = flash.flash->sector_size;
+		flash.num_sectors = flash.flash->num_sectors;
+
+		/* see if flash is in "power of 2" mode */
+		if (status & 0x1)
+			flash.sector_size &= ~(1 << (ffs(flash.sector_size) - 1));
+
+		flash.write_length = flash.sector_size;
+		break;
+	}
+	}
+
+	called_init = 1;
+	return 0;
+
+ unknown:
+	printf("Unknown SPI device: 0x%02X 0x%02X 0x%02X\n",
+		flash.manufacturer_id, flash.device_id1, flash.device_id2);
+	return 1;
+}
+
+/*
+ * Function:    spi_init_f
+ * Description: Init SPI-Controller (ROM part)
+ * return:      ---
+ */
+void spi_init_f(void)
+{
+}
+
+/*
+ * Function:    spi_init_r
+ * Description: Init SPI-Controller (RAM part) -
+ *		 The malloc engine is ready and we can move our buffers to
+ *		 normal RAM
+ *  return:      ---
+ */
+void spi_init_r(void)
+{
+#if defined(CONFIG_POST) && (CONFIG_POST & CFG_POST_SPI)
+	/* Our testing strategy here is pretty basic:
+	 *  - fill src memory with an 8-bit pattern
+	 *  - write the src memory to the SPI flash
+	 *  - read the SPI flash into the dst memory
+	 *  - compare src and dst memory regions
+	 *  - repeat a few times
+	 * The variations we test for:
+	 *  - change the 8-bit pattern a bit
+	 *  - change the read/write block size so we know:
+	 *    - writes smaller/equal/larger than the buffer work
+	 *    - writes smaller/equal/larger than the sector work
+	 *  - change the SPI offsets so we know:
+	 *    - writing partial sectors works
+	 */
+	uint8_t *mem_src, *mem_dst;
+	size_t i, c, l, o;
+	size_t test_count, errors;
+	uint8_t pattern;
+
+	SPI_INIT();
+
+	if (spi_detect_part())
+		goto out;
+	eeprom_info();
+
+	ulong lengths[] = {
+		flash.write_length,
+		flash.write_length * 2,
+		flash.write_length / 2,
+		flash.sector_size,
+		flash.sector_size * 2,
+		flash.sector_size / 2
+	};
+	ulong offsets[] = {
+		0,
+		flash.write_length,
+		flash.write_length * 2,
+		flash.write_length / 2,
+		flash.write_length / 4,
+		flash.sector_size,
+		flash.sector_size * 2,
+		flash.sector_size / 2,
+		flash.sector_size / 4,
+	};
+
+	/* the exact addresses are arbitrary ... they just need to not overlap */
+	mem_src = (void *)(0);
+	mem_dst = (void *)(max(flash.write_length, flash.sector_size) * 2);
+
+	test_count = 0;
+	errors = 0;
+	pattern = 0x00;
+
+	for (i = 0; i < 16; ++i) {	/* 16 = 8 bits * 2 iterations */
+		for (l = 0; l < ARRAY_SIZE(lengths); ++l) {
+			for (o = 0; o < ARRAY_SIZE(offsets); ++o) {
+				ulong len = lengths[l];
+				ulong off = offsets[o];
+
+				printf("Testing pattern 0x%02X of length %5lu and offset %5lu: ", pattern, len, off);
+
+				/* setup the source memory region */
+				memset(mem_src, pattern, len);
+
+				test_count += 4;
+				for (c = 0; c < 4; ++c) {	/* 4 is just a random repeat count */
+					if (ctrlc()) {
+						puts("\nAbort\n");
+						goto out;
+					}
+
+					/* make sure background fill pattern != pattern */
+					memset(mem_dst, pattern ^ 0xFF, len);
+
+					/* write out the source memory and then read it back and compare */
+					eeprom_write(0, off, mem_src, len);
+					eeprom_read(0, off, mem_dst, len);
+
+					if (memcmp(mem_src, mem_dst, len)) {
+						for (c = 0; c < len; ++c)
+							if (mem_src[c] != mem_dst[c])
+								break;
+						printf(" FAIL @ offset %u, skipping repeats ", c);
+						++errors;
+						break;
+					}
+
+					/* XXX: should shrink write region here to test with
+					 * leading/trailing canaries so we know surrounding
+					 * bytes don't get screwed.
+					 */
+				}
+				puts("\n");
+			}
+		}
+
+		/* invert the pattern every other run and shift out bits slowly */
+		pattern ^= 0xFF;
+		if (i % 2)
+			pattern = (pattern | 0x01) << 1;
+	}
+
+	if (errors)
+		printf("SPI FAIL: Out of %i tests, there were %i errors ;(\n", test_count, errors);
+	else
+		printf("SPI PASS: %i tests worked!\n", test_count);
+
+ out:
+	SPI_DEINIT();
+
+#endif
+}
+
+static void transmit_address(uint32_t addr)
+{
+	/* Send the highest byte of the 24 bit address at first */
+	spi_write_read_byte(addr >> 16);
+	/* Send the middle byte of the 24 bit address  at second */
+	spi_write_read_byte(addr >> 8);
+	/* Send the lowest byte of the 24 bit address finally */
+	spi_write_read_byte(addr);
+}
+
+/*
+ * Read a value from flash for verify purpose
+ * Inputs:	unsigned long ulStart - holds the SPI start address
+ *			int pnData - pointer to store value read from flash
+ *			long lCount - number of elements to read
+ */
+static int read_flash(unsigned long address, long count, uchar *buffer)
+{
+	size_t i;
+
+	/* Send the read command to SPI device */
+	SPI_ON();
+	spi_write_read_byte(flash.ops->read);
+	transmit_address(address);
+
+#ifndef CONFIG_SPI_FLASH_SLOW_READ
+	/* Send dummy byte when doing SPI fast reads */
+	spi_write_read_byte(0);
+#endif
+
+	/* After the SPI device address has been placed on the MOSI pin the data can be */
+	/* received on the MISO pin. */
+	for (i = 1; i <= count; ++i) {
+		*buffer++ = spi_write_read_byte(0);
+		if (i % flash.sector_size == 0)
+			puts(".");
+	}
+
+	SPI_OFF();
+
+	return 0;
+}
+
+static int enable_writing(void)
+{
+	ulong start;
+
+	if (flash.manufacturer_id == JED_MANU_ATMEL)
+		return 0;
+
+	/* A write enable instruction must previously have been executed */
+	SPI_ON();
+	spi_write_read_byte(0x06);
+	SPI_OFF();
+
+	/* The status register will be polled to check the write enable latch "WREN" */
+	start = get_timer(0);
+	while (get_timer(0) - start < TIMEOUT) {
+		if (read_status_register() & 0x02)
+			return 0;
+
+		if (ctrlc()) {
+			puts("\nAbort\n");
+			return -1;
+		}
+	}
+
+	puts("Timeout\n");
+	return -1;
+}
+
+static long address_to_sector(unsigned long address)
+{
+	if (address > (flash.num_sectors * flash.sector_size) - 1)
+		return -1;
+	return address / flash.sector_size;
+}
+
+static int erase_sector(int address)
+{
+	/* sector gets checked in higher function, so assume it's valid
+	 * here and figure out the offset of the sector in flash
+	 */
+	if (enable_writing())
+		return -1;
+
+	/*
+	 * Send the erase block command to the flash followed by the 24 address
+	 * to point to the start of a sector
+	 */
+	SPI_ON();
+	spi_write_read_byte(flash.ops->erase);
+	transmit_address(address);
+	SPI_OFF();
+
+	return wait_for_ready_status();
+}
+
+/* Write [count] bytes out of [buffer] into the given SPI [address] */
+static long write_flash(unsigned long address, long count, uchar *buffer)
+{
+	long i, write_buffer_size;
+
+	if (enable_writing())
+		return -1;
+
+	/* Send write command followed by the 24 bit address */
+	SPI_ON();
+	spi_write_read_byte(flash.ops->write);
+	transmit_address(address);
+
+	/* Shoot out a single write buffer */
+	write_buffer_size = min(count, flash.write_length);
+	for (i = 0; i < write_buffer_size; ++i)
+		spi_write_read_byte(buffer[i]);
+
+	SPI_OFF();
+
+	/* Wait for the flash to do its thing */
+	if (wait_for_ready_status()) {
+		puts("SPI Program Time out! ");
+		return -1;
+	}
+
+	return i;
+}
+
+/* Write [count] bytes out of [buffer] into the given SPI [address] */
+static int write_sector(unsigned long address, long count, uchar *buffer)
+{
+	long write_cnt;
+
+	while (count != 0) {
+		write_cnt = write_flash(address, count, buffer);
+		if (write_cnt == -1)
+			return -1;
+
+		/* Now that we've sent some bytes out to the flash, update
+		 * our counters a bit
+		 */
+		count -= write_cnt;
+		address += write_cnt;
+		buffer += write_cnt;
+	}
+
+	/* return the appropriate error code */
+	return 0;
+}
+
+/*
+ * Function:    spi_write
+ */
+ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
+{
+	unsigned long offset;
+	int start_sector, end_sector;
+	int start_byte, end_byte;
+	uchar *temp = NULL;
+	int num, ret = 0;
+
+	SPI_INIT();
+
+	if (spi_detect_part())
+		goto out;
+
+	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+
+	/* Get the start block number */
+	start_sector = address_to_sector(offset);
+	if (start_sector == -1) {
+		puts("Invalid sector! ");
+		goto out;
+	}
+	end_sector = address_to_sector(offset + len - 1);
+	if (end_sector == -1) {
+		puts("Invalid sector! ");
+		goto out;
+	}
+
+	/* Since flashes operate in sector units but the eeprom command
+	 * operates as a continuous stream of bytes, we need to emulate
+	 * the eeprom behavior.  So here we read in the sector, overlay
+	 * any bytes we're actually modifying, erase the sector, and
+	 * then write back out the new sector.
+	 */
+	temp = malloc(flash.sector_size);
+	if (!temp) {
+		puts("Malloc for sector failed! ");
+		goto out;
+	}
+
+	for (num = start_sector; num <= end_sector; num++) {
+		unsigned long address = num * flash.sector_size;
+
+		/* XXX: should add an optimization when spanning sectors:
+		 * No point in reading in a sector if we're going to be
+		 * clobbering the whole thing.  Need to also add a test
+		 * case to make sure the optimization is correct.
+		 */
+		if (read_flash(address, flash.sector_size, temp)) {
+			puts("Read sector failed! ");
+			len = 0;
+			break;
+		}
+
+		start_byte = max(address, offset);
+		end_byte = address + flash.sector_size - 1;
+		if (end_byte > (offset + len))
+			end_byte = (offset + len - 1);
+
+		memcpy(temp + start_byte - address,
+			buffer + start_byte - offset,
+			end_byte - start_byte + 1);
+
+		if (erase_sector(address)) {
+			puts("Erase sector failed! ");
+			goto out;
+		}
+
+		if (write_sector(address, flash.sector_size, temp)) {
+			puts("Write sector failed! ");
+			goto out;
+		}
+
+		puts(".");
+	}
+
+	ret = len;
+
+ out:
+	free(temp);
+
+	SPI_DEINIT();
+
+	return ret;
+}
+
+/*
+ * Function: spi_read
+ */
+ssize_t spi_read(uchar *addr, int alen, uchar *buffer, int len)
+{
+	unsigned long offset;
+
+	SPI_INIT();
+
+	if (spi_detect_part())
+		len = 0;
+	else {
+		offset = addr[0] << 16 | addr[1] << 8 | addr[2];
+		read_flash(offset, len, buffer);
+	}
+
+	SPI_DEINIT();
+
+	return len;
+}
+
+/*
+ *	Spit out some useful information about the SPI eeprom
+ */
+int eeprom_info(void)
+{
+	int ret = 0;
+
+	SPI_INIT();
+
+	if (spi_detect_part())
+		ret = 1;
+	else
+		printf("SPI Device: %s 0x%02X (%s) 0x%02X 0x%02X\n"
+			"Parameters: num sectors = %i, sector size = %i, write size = %i\n"
+			"Flash Size: %i mbit (%i mbyte)\n"
+			"Status: 0x%02X\n",
+			flash.flash->name, flash.manufacturer_id, flash.manufacturer->name,
+			flash.device_id1, flash.device_id2, flash.num_sectors,
+			flash.sector_size, flash.write_length,
+			(flash.num_sectors * flash.sector_size) >> 17,
+			(flash.num_sectors * flash.sector_size) >> 20,
+			read_status_register());
+
+	SPI_DEINIT();
+
+	return ret;
+}
+
+#endif
diff --git a/board/bf537-stamp/stm_m25p64.c b/board/bf537-stamp/stm_m25p64.c
deleted file mode 100644
index c48c3c7..0000000
--- a/board/bf537-stamp/stm_m25p64.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/****************************************************************************
- *  SPI flash driver for M25P64
- ****************************************************************************/
-#include <common.h>
-#include <linux/ctype.h>
-#include <asm/io.h>
-#include <asm/mach-common/bits/spi.h>
-
-#if defined(CONFIG_SPI)
-
-/* Application definitions */
-
-#define	NUM_SECTORS	128	/* number of sectors */
-#define SECTOR_SIZE	0x10000
-#define NOP_NUM		1000
-
-#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL) /* Settings to the SPI_CTL */
-#define TIMOD01 (0x01)	/* stes the SPI to work with core instructions */
-
-/* Flash commands */
-#define	SPI_WREN	(0x06)	/*Set Write Enable Latch */
-#define	SPI_WRDI	(0x04)	/*Reset Write Enable Latch */
-#define	SPI_RDSR	(0x05)	/*Read Status Register */
-#define	SPI_WRSR	(0x01)	/*Write Status Register */
-#define	SPI_READ	(0x03)	/*Read data from memory */
-#define	SPI_FAST_READ	(0x0B)	/*Read data from memory */
-#define	SPI_PP		(0x02)	/*Program Data into memory */
-#define	SPI_SE		(0xD8)	/*Erase one sector in memory */
-#define	SPI_BE		(0xC7)	/*Erase all memory */
-#define	WIP		(0x1)	/*Check the write in progress bit of the SPI status register */
-#define	WEL		(0x2)	/*Check the write enable bit of the SPI status register */
-
-#define	TIMEOUT		350000000
-
-typedef enum {
-	NO_ERR,
-	POLL_TIMEOUT,
-	INVALID_SECTOR,
-	INVALID_BLOCK,
-} ERROR_CODE;
-
-void spi_init_f(void);
-void spi_init_r(void);
-ssize_t spi_read(uchar *, int, uchar *, int);
-ssize_t spi_write(uchar *, int, uchar *, int);
-
-char ReadStatusRegister(void);
-void Wait_For_SPIF(void);
-void SetupSPI(const int spi_setting);
-void SPI_OFF(void);
-void SendSingleCommand(const int iCommand);
-
-ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector);
-ERROR_CODE EraseBlock(int nBlock);
-ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData);
-ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData);
-ERROR_CODE Wait_For_Status(char Statusbit);
-ERROR_CODE Wait_For_WEL(void);
-
-/*
- * Function:    spi_init_f
- * Description: Init SPI-Controller (ROM part)
- * return:      ---
- */
-void spi_init_f(void)
-{
-}
-
-/*
- * Function:    spi_init_r
- * Description: Init SPI-Controller (RAM part) -
- *		 The malloc engine is ready and we can move our buffers to
- *		 normal RAM
- *  return:      ---
- */
-void spi_init_r(void)
-{
-	return;
-}
-
-/*
- * Function:    spi_write
- */
-ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len)
-{
-	unsigned long offset;
-	int start_block, end_block;
-	int start_byte, end_byte;
-	ERROR_CODE result = NO_ERR;
-	uchar temp[SECTOR_SIZE];
-	int i, num;
-
-	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
-	/* Get the start block number */
-	result = GetSectorNumber(offset, &start_block);
-	if (result == INVALID_SECTOR) {
-		printf("Invalid sector! ");
-		return 0;
-	}
-	/* Get the end block number */
-	result = GetSectorNumber(offset + len - 1, &end_block);
-	if (result == INVALID_SECTOR) {
-		printf("Invalid sector! ");
-		return 0;
-	}
-
-	for (num = start_block; num <= end_block; num++) {
-		ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
-		start_byte = num * SECTOR_SIZE;
-		end_byte = (num + 1) * SECTOR_SIZE - 1;
-		if (start_byte < offset)
-			start_byte = offset;
-		if (end_byte > (offset + len))
-			end_byte = (offset + len - 1);
-		for (i = start_byte; i <= end_byte; i++)
-			temp[i - num * SECTOR_SIZE] = buffer[i - offset];
-		EraseBlock(num);
-		result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp);
-		if (result != NO_ERR)
-			return 0;
-		printf(".");
-	}
-	return len;
-}
-
-/*
- * Function: spi_read
- */
-ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len)
-{
-	unsigned long offset;
-	offset = addr[0] << 16 | addr[1] << 8 | addr[2];
-	ReadData(offset, len, (int *)buffer);
-	return len;
-}
-
-void SendSingleCommand(const int iCommand)
-{
-	unsigned short dummy;
-
-	/* turns on the SPI in single write mode */
-	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
-
-	/* sends the actual command to the SPI TX register */
-	*pSPI_TDBR = iCommand;
-	SSYNC();
-
-	/* The SPI status register will be polled to check the SPIF bit */
-	Wait_For_SPIF();
-
-	dummy = *pSPI_RDBR;
-
-	/* The SPI will be turned off */
-	SPI_OFF();
-
-}
-
-void SetupSPI(const int spi_setting)
-{
-
-	if (icache_status() || dcache_status())
-		udelay(CONFIG_CCLK_HZ / 50000000);
-	/*sets up the PF10 to be the slave select of the SPI */
-	*pPORTF_FER |= (PF10 | PF11 | PF12 | PF13);
-	*pSPI_FLG = 0xFF02;
-	*pSPI_BAUD = CONFIG_SPI_BAUD;
-	*pSPI_CTL = spi_setting;
-	SSYNC();
-
-	*pSPI_FLG = 0xFD02;
-	SSYNC();
-}
-
-void SPI_OFF(void)
-{
-
-	*pSPI_CTL = 0x0400;	/* disable SPI */
-	*pSPI_FLG = 0;
-	*pSPI_BAUD = 0;
-	SSYNC();
-	udelay(CONFIG_CCLK_HZ / 50000000);
-
-}
-
-void Wait_For_SPIF(void)
-{
-	unsigned short dummyread;
-	while ((*pSPI_STAT & TXS)) ;
-	while (!(*pSPI_STAT & SPIF)) ;
-	while (!(*pSPI_STAT & RXS)) ;
-	/* Read dummy to empty the receive register */
-	dummyread = *pSPI_RDBR;
-}
-
-ERROR_CODE Wait_For_WEL(void)
-{
-	int i;
-	char status_register = 0;
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	for (i = 0; i < TIMEOUT; i++) {
-		status_register = ReadStatusRegister();
-		if ((status_register & WEL)) {
-			ErrorCode = NO_ERR;
-			break;
-		}
-		ErrorCode = POLL_TIMEOUT;	/* Time out error */
-	};
-
-	return ErrorCode;
-}
-
-ERROR_CODE Wait_For_Status(char Statusbit)
-{
-	int i;
-	char status_register = 0xFF;
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	for (i = 0; i < TIMEOUT; i++) {
-		status_register = ReadStatusRegister();
-		if (!(status_register & Statusbit)) {
-			ErrorCode = NO_ERR;
-			break;
-		}
-		ErrorCode = POLL_TIMEOUT;	/* Time out error */
-	};
-
-	return ErrorCode;
-}
-
-char ReadStatusRegister(void)
-{
-	char status_register = 0;
-
-	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));	/* Turn on the SPI */
-
-	*pSPI_TDBR = SPI_RDSR;	/* send instruction to read status register */
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the instruction has been sent */
-	*pSPI_TDBR = 0;		/*send dummy to receive the status register */
-	SSYNC();
-	Wait_For_SPIF();	/*wait until the data has been sent */
-	status_register = *pSPI_RDBR;	/*read the status register */
-
-	SPI_OFF();		/* Turn off the SPI */
-
-	return status_register;
-}
-
-ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector)
-{
-	int nSector = 0;
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) {
-		ErrorCode = INVALID_SECTOR;
-		return ErrorCode;
-	}
-
-	nSector = (int)ulOffset / 0x10000;
-	*pnSector = nSector;
-
-	return ErrorCode;
-}
-
-ERROR_CODE EraseBlock(int nBlock)
-{
-	unsigned long ulSectorOff = 0x0, ShiftValue;
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	/* if the block is invalid just return */
-	if ((nBlock < 0) || (nBlock > NUM_SECTORS)) {
-		ErrorCode = INVALID_BLOCK;
-		return ErrorCode;
-	}
-	/* figure out the offset of the block in flash */
-	if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) {
-		ulSectorOff = (nBlock * SECTOR_SIZE);
-
-	} else {
-		ErrorCode = INVALID_BLOCK;
-		return ErrorCode;
-	}
-
-	/* A write enable instruction must previously have been executed */
-	SendSingleCommand(SPI_WREN);
-
-	/* The status register will be polled to check the write enable latch "WREN" */
-	ErrorCode = Wait_For_WEL();
-
-	if (POLL_TIMEOUT == ErrorCode) {
-		printf("SPI Erase block error\n");
-		return ErrorCode;
-	} else
-
-	/* Turn on the SPI to send single commands */
-	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
-
-	/*
-	 * Send the erase block command to the flash followed by the 24 address
-	 * to point to the start of a sector
-	 */
-	*pSPI_TDBR = SPI_SE;
-	SSYNC();
-	Wait_For_SPIF();
-	/* Send the highest byte of the 24 bit address at first */
-	ShiftValue = (ulSectorOff >> 16);
-	*pSPI_TDBR = ShiftValue;
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-	/* Send the middle byte of the 24 bit address  at second */
-	ShiftValue = (ulSectorOff >> 8);
-	*pSPI_TDBR = ShiftValue;
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-	/* Send the lowest byte of the 24 bit address finally */
-	*pSPI_TDBR = ulSectorOff;
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-
-	/* Turns off the SPI */
-	SPI_OFF();
-
-	/* Poll the status register to check the Write in Progress bit */
-	/* Sector erase takes time */
-	ErrorCode = Wait_For_Status(WIP);
-
-	/* block erase should be complete */
-	return ErrorCode;
-}
-
-/*
- * ERROR_CODE ReadData()
- * Read a value from flash for verify purpose
- * Inputs:	unsigned long ulStart - holds the SPI start address
- *			int pnData - pointer to store value read from flash
- *			long lCount - number of elements to read
- */
-ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData)
-{
-	unsigned long ShiftValue;
-	char *cnData;
-	int i;
-
-	/* Pointer cast to be able to increment byte wise */
-
-	cnData = (char *)pnData;
-	/* Start SPI interface */
-	SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
-
-#ifdef CONFIG_SPI_FLASH_FAST_READ
-	/* Send the read command to SPI device */
-	*pSPI_TDBR = SPI_FAST_READ;
-#else
-	/* Send the read command to SPI device */
-	*pSPI_TDBR = SPI_READ;
-#endif
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-	/* Send the highest byte of the 24 bit address at first */
-	ShiftValue = (ulStart >> 16);
-	/* Send the byte to the SPI device */
-	*pSPI_TDBR = ShiftValue;
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-	/* Send the middle byte of the 24 bit address  at second */
-	ShiftValue = (ulStart >> 8);
-	/* Send the byte to the SPI device */
-	*pSPI_TDBR = ShiftValue;
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-	/* Send the lowest byte of the 24 bit address finally */
-	*pSPI_TDBR = ulStart;
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-
-#ifdef CONFIG_SPI_FLASH_FAST_READ
-	/* Send dummy for FAST_READ */
-	*pSPI_TDBR = 0;
-	SSYNC();
-	/* Wait until the instruction has been sent */
-	Wait_For_SPIF();
-#endif
-
-	/* After the SPI device address has been placed on the MOSI pin the data can be */
-	/* received on the MISO pin. */
-	for (i = 0; i < lCount; i++) {
-		*pSPI_TDBR = 0;
-		SSYNC();
-		while (!(*pSPI_STAT & RXS)) ;
-		*cnData++ = *pSPI_RDBR;
-
-		if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0))
-			printf(".");
-	}
-
-	/* Turn off the SPI */
-	SPI_OFF();
-
-	return NO_ERR;
-}
-
-ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount,
-		      int *iDataSource, long *lWriteCount)
-{
-
-	unsigned long ulWAddr;
-	long lWTransferCount = 0;
-	int i;
-	char iData;
-	char *temp = (char *)iDataSource;
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	/* First, a Write Enable Command must be sent to the SPI. */
-	SendSingleCommand(SPI_WREN);
-
-	/*
-	 * Second, the SPI Status Register will be tested whether the
-	 * Write Enable Bit has been set
-	 */
-	ErrorCode = Wait_For_WEL();
-	if (POLL_TIMEOUT == ErrorCode) {
-		printf("SPI Write Time Out\n");
-		return ErrorCode;
-	} else
-		/* Third, the 24 bit address will be shifted out
-		 * the SPI MOSI bytewise.
-		 * Turns the SPI on
-		 */
-		SetupSPI((COMMON_SPI_SETTINGS | TIMOD01));
-	*pSPI_TDBR = SPI_PP;
-	SSYNC();
-	/*wait until the instruction has been sent */
-	Wait_For_SPIF();
-	ulWAddr = (ulStartAddr >> 16);
-	*pSPI_TDBR = ulWAddr;
-	SSYNC();
-	/*wait until the instruction has been sent */
-	Wait_For_SPIF();
-	ulWAddr = (ulStartAddr >> 8);
-	*pSPI_TDBR = ulWAddr;
-	SSYNC();
-	/*wait until the instruction has been sent */
-	Wait_For_SPIF();
-	ulWAddr = ulStartAddr;
-	*pSPI_TDBR = ulWAddr;
-	SSYNC();
-	/*wait until the instruction has been sent */
-	Wait_For_SPIF();
-	/*
-	 * Fourth, maximum number of 256 bytes will be taken from the Buffer
-	 * and sent to the SPI device.
-	 */
-	for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) {
-		iData = *temp;
-		*pSPI_TDBR = iData;
-		SSYNC();
-		/*wait until the instruction has been sent */
-		Wait_For_SPIF();
-		temp++;
-	}
-
-	/* Turns the SPI off */
-	SPI_OFF();
-
-	/*
-	 * Sixth, the SPI Write in Progress Bit must be toggled to ensure the
-	 * programming is done before start of next transfer
-	 */
-	ErrorCode = Wait_For_Status(WIP);
-
-	if (POLL_TIMEOUT == ErrorCode) {
-		printf("SPI Program Time out!\n");
-		return ErrorCode;
-	} else
-
-		*lWriteCount = lWTransferCount;
-
-	return ErrorCode;
-}
-
-ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData)
-{
-
-	unsigned long ulWStart = ulStart;
-	long lWCount = lCount, lWriteCount;
-	long *pnWriteCount = &lWriteCount;
-
-	ERROR_CODE ErrorCode = NO_ERR;
-
-	while (lWCount != 0) {
-		ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount);
-
-		/*
-		 * After each function call of WriteFlash the counter
-		 * must be adjusted
-		 */
-		lWCount -= *pnWriteCount;
-
-		/* Also, both address pointers must be recalculated. */
-		ulWStart += *pnWriteCount;
-		pnData += *pnWriteCount / 4;
-	}
-
-	/* return the appropriate error code */
-	return ErrorCode;
-}
-
-#endif				/* CONFIG_SPI */