mpc8260: remove VoVPN-GW board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

7 files changed, 0 insertions, 1149 deletions

diff --git a/board/funkwerk/vovpn-gw/Kconfig b/board/funkwerk/vovpn-gw/Kconfig
deleted file mode 100644
index 6b6c328..0000000
--- a/board/funkwerk/vovpn-gw/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_VOVPN_GW
-
-config SYS_BOARD
-	default "vovpn-gw"
-
-config SYS_VENDOR
-	default "funkwerk"
-
-config SYS_CONFIG_NAME
-	default "VoVPN-GW"
-
-endif
diff --git a/board/funkwerk/vovpn-gw/MAINTAINERS b/board/funkwerk/vovpn-gw/MAINTAINERS
deleted file mode 100644
index 34d1cc1..0000000
--- a/board/funkwerk/vovpn-gw/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-VOVPN-GW BOARD
-#M:	-
-S:	Maintained
-F:	board/funkwerk/vovpn-gw/
-F:	include/configs/VoVPN-GW.h
-F:	configs/VoVPN-GW_66MHz_defconfig
diff --git a/board/funkwerk/vovpn-gw/Makefile b/board/funkwerk/vovpn-gw/Makefile
deleted file mode 100644
index 3253247..0000000
--- a/board/funkwerk/vovpn-gw/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= vovpn-gw.o flash.o m88e6060.o
diff --git a/board/funkwerk/vovpn-gw/flash.c b/board/funkwerk/vovpn-gw/flash.c
deleted file mode 100644
index 829514c..0000000
--- a/board/funkwerk/vovpn-gw/flash.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * (C) Copyright 2004
- * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
- *
- * Support for the Elmeg VoVPN Gateway Module
- * ------------------------------------------
- * This is a signle bank flashdriver for INTEL 28F320J3, 28F640J3
- * and 28F128J3A flashs working in 8 Bit mode.
- *
- * Most of this code is taken from existing u-boot source code.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-
-flash_info_t				flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define FLASH_CMD_READ_ID		0x90
-#define FLASH_CMD_READ_STATUS		0x70
-#define FLASH_CMD_RESET			0xff
-#define FLASH_CMD_BLOCK_ERASE		0x20
-#define FLASH_CMD_ERASE_CONFIRM		0xd0
-#define FLASH_CMD_CLEAR_STATUS		0x50
-#define FLASH_CMD_SUSPEND_ERASE		0xb0
-#define FLASH_CMD_WRITE			0x40
-#define FLASH_CMD_WRITE_BUFF		0xe8
-#define FLASH_CMD_PROG_RESUME		0xd0
-#define FLASH_CMD_PROTECT		0x60
-#define FLASH_CMD_PROTECT_SET		0x01
-#define FLASH_CMD_PROTECT_CLEAR		0xd0
-#define FLASH_STATUS_DONE		0x80
-
-#define FLASH_WRITE_BUFFER_SIZE		32
-
-#ifdef CONFIG_SYS_FLASH_16BIT
-#define FLASH_WORD_SIZE			unsigned short
-#define FLASH_ID_MASK			0xffff
-#define FLASH_CMD_ADDR_SHIFT		0
-#else
-#define FLASH_WORD_SIZE			unsigned char
-#define FLASH_ID_MASK			0xff
-/* A0 is not used in either 8x or 16x for READ ID */
-#define FLASH_CMD_ADDR_SHIFT		1
-#endif
-
-
-static unsigned long
-flash_get(volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
-{
-	volatile FLASH_WORD_SIZE *p;
-	FLASH_WORD_SIZE value;
-	int i;
-
-	addr[0] = FLASH_CMD_READ_ID;
-
-	/* manufactor */
-	value = addr[0 << FLASH_CMD_ADDR_SHIFT];
-	switch (value) {
-	case (INTEL_MANUFACT & FLASH_ID_MASK):
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		*addr = FLASH_CMD_RESET;
-		return (0);
-
-	}
-
-	/* device */
-	value = addr[1 << FLASH_CMD_ADDR_SHIFT];
-	switch (value) {
-	case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
-		info->flash_id += FLASH_28F320J3A;
-		info->sector_count = 32;
-		info->size = 0x00400000;
-		break;
-	case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
-		info->flash_id += FLASH_28F640J3A;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		break;
-	case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
-		info->flash_id += FLASH_28F128J3A;
-		info->sector_count = 128;
-		info->size = 0x01000000;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		*addr = FLASH_CMD_RESET;
-		return (0);
-	}
-
-	/* setup sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		info->start[i] = (unsigned long)addr + (i * info->size/info->sector_count);
-	}
-
-	/* check protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		p = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		info->protect[i] = p[2 << FLASH_CMD_ADDR_SHIFT] & 1;
-	}
-
-	/* reset bank */
-	*addr = FLASH_CMD_RESET;
-	return (info->size);
-}
-
-unsigned long
-flash_init(void)
-{
-	unsigned long	size;
-	int		i;
-
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-	size = flash_get((volatile FLASH_WORD_SIZE *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH Size=0x%08lx\n", size);
-		return (0);
-	}
-
-	/* always protect 1 sector containing the HRCW */
-	flash_protect(FLAG_PROTECT_SET,
-		      flash_info[0].start[0],
-		      flash_info[0].start[1] - 1,
-		      &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_FLASH,
-		      CONFIG_SYS_MONITOR_FLASH+CONFIG_SYS_MONITOR_LEN-1,
-		      &flash_info[0]);
-#endif
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-	return (size);
-}
-
-void
-flash_print_info(flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F320J3A:	printf ("28F320JA3 (32 Mbit)\n");
-				break;
-	case FLASH_28F640J3A:	printf ("28F640JA3 (64 Mbit)\n");
-				break;
-	case FLASH_28F128J3A:	printf ("28F128JA3 (128 Mbit)\n");
-				break;
-	default:		printf ("Unknown Chip Type");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
-int
-flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	unsigned long start, now, last;
-	int flag, prot, sect;
-	volatile FLASH_WORD_SIZE *addr;
-	FLASH_WORD_SIZE status;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return (1);
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Cannot erase unknown flash - aborted\n");
-		return (1);
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer (0);
-	last  = start;
-
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect]) {
-			continue;
-		}
-
-		addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-
-#ifdef DEBUG
-		printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
-#endif
-
-		*addr = FLASH_CMD_CLEAR_STATUS;
-		*addr = FLASH_CMD_BLOCK_ERASE;
-		*addr = FLASH_CMD_ERASE_CONFIRM;
-
-		/* re-enable interrupts if necessary */
-		if (flag) {
-			enable_interrupts();
-		}
-
-		/* wait at least 80us - let's wait 1 ms */
-		udelay (1000);
-
-		while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
-			if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				printf("Flash erase timeout at address %lx\n", info->start[sect]);
-				*addr = FLASH_CMD_SUSPEND_ERASE;
-				*addr = FLASH_CMD_RESET;
-				return (1);
-			}
-
-			/* show that we're waiting */
-			if ((now - last) > 1000) {	/* every second */
-				putc ('.');
-				last = now;
-			}
-		}
-		*addr = FLASH_CMD_RESET;
-	}
-	printf (" done\n");
-	return (0);
-}
-
-static int
-write_buff2( volatile FLASH_WORD_SIZE *dst,
-	     volatile FLASH_WORD_SIZE *src,
-	     unsigned long cnt )
-{
-	unsigned long start;
-	FLASH_WORD_SIZE status;
-	int flag, i;
-
-	start = get_timer (0);
-	while (1) {
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-		dst[0] = FLASH_CMD_WRITE_BUFF;
-		if ((status = *dst) & FLASH_STATUS_DONE) {
-			break;
-		}
-
-		/* re-enable interrupts if necessary */
-		if (flag) {
-			enable_interrupts();
-		}
-
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (-1);
-		}
-	}
-	dst[0] = (FLASH_WORD_SIZE)(cnt - 1);
-	for (i=0; i<cnt; i++) {
-		dst[i] = src[i];
-	}
-	dst[0] = FLASH_CMD_PROG_RESUME;
-
-	if (flag) {
-		enable_interrupts();
-	}
-
-	return( 0 );
-}
-
-static int
-poll_status( volatile FLASH_WORD_SIZE *addr )
-{
-	unsigned long start;
-
-	start = get_timer (0);
-	/* wait for error or finish */
-	while (1) {
-		if (*addr == FLASH_STATUS_DONE) {
-			if (*addr == FLASH_STATUS_DONE) {
-				break;
-			}
-		}
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			*addr = FLASH_CMD_RESET;
-			return (-1);
-		}
-	}
-	*addr = FLASH_CMD_RESET;
-	return (0);
-}
-
-/*
- * write_buff return values:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-int
-write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt)
-{
-	volatile FLASH_WORD_SIZE *addr, *dst;
-	unsigned long bcnt;
-	int flag, i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		return (4);
-	}
-
-	addr = (volatile FLASH_WORD_SIZE *)(info->start[0]);
-	dst = (volatile FLASH_WORD_SIZE *) udst;
-
-#ifdef CONFIG_SYS_FLASH_16BIT
-#error NYI
-#else
-	while (cnt > 0) {
-		/* Check if buffer write is possible */
-		if (cnt > 1 && (((unsigned long)dst & (FLASH_WRITE_BUFFER_SIZE - 1)) == 0)) {
-			bcnt = cnt > FLASH_WRITE_BUFFER_SIZE ? FLASH_WRITE_BUFFER_SIZE : cnt;
-			/* Check if Flash is (sufficiently) erased */
-			for (i=0; i<bcnt; i++) {
-				if ((dst[i] & src[i]) != src[i]) {
-					return (2);
-				}
-			}
-			if (write_buff2( dst,src,bcnt ) != 0) {
-				addr[0] = FLASH_CMD_READ_STATUS;
-			}
-			if (poll_status( dst ) != 0) {
-				return (1);
-			}
-			cnt -= bcnt;
-			dst += bcnt;
-			src += bcnt;
-			continue;
-		}
-
-		/* Check if Flash is (sufficiently) erased */
-		if ((*dst & *src) != *src) {
-			return (2);
-		}
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts();
-		addr[0] = FLASH_CMD_ERASE_CONFIRM;
-		addr[0] = FLASH_CMD_WRITE;
-		*dst++ = *src++;
-		/* re-enable interrupts if necessary */
-		if (flag) {
-			enable_interrupts();
-		}
-
-		if (poll_status( dst ) != 0) {
-			return (1);
-		}
-		cnt --;
-	}
-#endif
-	return (0);
-}
-
-int
-flash_real_protect(flash_info_t *info, long sector, int prot)
-{
-	volatile FLASH_WORD_SIZE *addr;
-	unsigned long start;
-
-	addr = (volatile FLASH_WORD_SIZE *)(info->start[sector]);
-	*addr = FLASH_CMD_CLEAR_STATUS;
-	*addr = FLASH_CMD_PROTECT;
-
-	if(prot) {
-		*addr = FLASH_CMD_PROTECT_SET;
-	} else {
-		*addr = FLASH_CMD_PROTECT_CLEAR;
-	}
-
-	/* wait for error or finish */
-	start = get_timer (0);
-	while(!(addr[0] & FLASH_STATUS_DONE)){
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf("Flash protect timeout at address %lx\n",  info->start[sector]);
-			addr[0] = FLASH_CMD_RESET;
-			return (1);
-		}
-	}
-
-	/* Set software protect flag */
-	info->protect[sector] = prot;
-	*addr = FLASH_CMD_RESET;
-	return (0);
-}
diff --git a/board/funkwerk/vovpn-gw/m88e6060.c b/board/funkwerk/vovpn-gw/m88e6060.c
deleted file mode 100644
index 7aa9593..0000000
--- a/board/funkwerk/vovpn-gw/m88e6060.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2004
- * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
- *
- * Support for the Elmeg VoVPN Gateway Module
- * ------------------------------------------
- * Initialize Marvell M88E6060 Switch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <asm/m8260_pci.h>
-#include <net.h>
-#include <miiphy.h>
-
-#include "m88e6060.h"
-
-#if defined(CONFIG_CMD_NET)
-static int		prtTab[M88X_PRT_CNT] = { 8, 9, 10, 11, 12, 13 };
-static int		phyTab[M88X_PHY_CNT] = { 0, 1, 2, 3, 4 };
-
-static m88x_regCfg_t	prtCfg0[] = {
-	{  4, 0x3e7c, 0x8000 },
-	{  4, 0x3e7c, 0x8003 },
-	{  6, 0x0fc0, 0x001e },
-	{ -1, 0xffff, 0x0000 }
-};
-
-static m88x_regCfg_t	prtCfg1[] = {
-	{  4, 0x3e7c, 0x8000 },
-	{  4, 0x3e7c, 0x8003 },
-	{  6, 0x0fc0, 0x001d },
-	{ -1, 0xffff, 0x0000 }
-};
-
-static m88x_regCfg_t	prtCfg2[] = {
-	{  4, 0x3e7c, 0x8000 },
-	{  4, 0x3e7c, 0x8003 },
-	{  6, 0x0fc0, 0x001b },
-	{ -1, 0xffff, 0x0000 }
-};
-
-static m88x_regCfg_t	prtCfg3[] = {
-	{  4, 0x3e7c, 0x8000 },
-	{  4, 0x3e7c, 0x8003 },
-	{  6, 0x0fc0, 0x0017 },
-	{ -1, 0xffff, 0x0000 }
-};
-
-static m88x_regCfg_t	prtCfg4[] = {
-	{  4, 0x3e7c, 0x8000 },
-	{  4, 0x3e7c, 0x8003 },
-	{  6, 0x0fc0, 0x000f },
-	{ -1, 0xffff, 0x0000 }
-};
-
-static m88x_regCfg_t	*prtCfg[M88X_PRT_CNT] = {
-	prtCfg0,prtCfg1,prtCfg2,prtCfg3,prtCfg4,NULL
-};
-
-static m88x_regCfg_t	phyCfgX[] = {
-	{  4, 0xfa1f, 0x01e0 },
-	{  0, 0x213f, 0x1200 },
-	{ 24, 0x81ff, 0x1200 },
-	{ -1, 0xffff, 0x0000 }
-};
-
-static m88x_regCfg_t	*phyCfg[M88X_PHY_CNT] = {
-	phyCfgX,phyCfgX,phyCfgX,phyCfgX,NULL
-};
-
-#if 0
-static void
-m88e6060_dump( int devAddr )
-{
-	int		i, j;
-	unsigned short	val[6];
-
-	printf( "M88E6060 Register Dump\n" );
-	printf( "====================================\n" );
-	printf( "PortNo    0    1    2    3    4    5\n" );
-	for (i=0; i<6; i++)
-		miiphy_read( devAddr+prtTab[i],M88X_PRT_STAT,&val[i] );
-	printf( "STAT   %04hx %04hx %04hx %04hx %04hx %04hx\n",
-		val[0],val[1],val[2],val[3],val[4],val[5] );
-
-	for (i=0; i<6; i++)
-		miiphy_read( devAddr+prtTab[i],M88X_PRT_ID,&val[i] );
-	printf( "ID     %04hx %04hx %04hx %04hx %04hx %04hx\n",
-		val[0],val[1],val[2],val[3],val[4],val[5] );
-
-	for (i=0; i<6; i++)
-		miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val[i] );
-	printf( "CNTL   %04hx %04hx %04hx %04hx %04hx %04hx\n",
-		val[0],val[1],val[2],val[3],val[4],val[5] );
-
-	for (i=0; i<6; i++)
-		miiphy_read( devAddr+prtTab[i],M88X_PRT_VLAN,&val[i] );
-	printf( "VLAN   %04hx %04hx %04hx %04hx %04hx %04hx\n",
-		val[0],val[1],val[2],val[3],val[4],val[5] );
-
-	for (i=0; i<6; i++)
-		miiphy_read( devAddr+prtTab[i],M88X_PRT_PAV,&val[i] );
-	printf( "PAV    %04hx %04hx %04hx %04hx %04hx %04hx\n",
-		val[0],val[1],val[2],val[3],val[4],val[5] );
-
-	for (i=0; i<6; i++)
-		miiphy_read( devAddr+prtTab[i],M88X_PRT_RX,&val[i] );
-	printf( "RX     %04hx %04hx %04hx %04hx %04hx %04hx\n",
-		val[0],val[1],val[2],val[3],val[4],val[5] );
-
-	for (i=0; i<6; i++)
-		miiphy_read( devAddr+prtTab[i],M88X_PRT_TX,&val[i] );
-	printf( "TX     %04hx %04hx %04hx %04hx %04hx %04hx\n",
-		val[0],val[1],val[2],val[3],val[4],val[5] );
-
-	printf( "------------------------------------\n" );
-	printf( "PhyNo     0    1    2    3    4\n" );
-	for (i=0; i<9; i++) {
-		for (j=0; j<5; j++) {
-			miiphy_read( devAddr+phyTab[j],i,&val[j] );
-		}
-		printf( "0x%02x   %04hx %04hx %04hx %04hx %04hx\n",
-			i,val[0],val[1],val[2],val[3],val[4] );
-	}
-	for (i=0x10; i<0x1d; i++) {
-		for (j=0; j<5; j++) {
-			miiphy_read( devAddr+phyTab[j],i,&val[j] );
-		}
-		printf( "0x%02x   %04hx %04hx %04hx %04hx %04hx\n",
-			i,val[0],val[1],val[2],val[3],val[4] );
-	}
-}
-#endif
-
-int
-m88e6060_initialize( int devAddr )
-{
-	static char	*_f = "m88e6060_initialize:";
-	m88x_regCfg_t	*p;
-	int		err;
-	int		i;
-	unsigned short	val;
-
-	/*** reset all phys into powerdown ************************************/
-	for (i=0, err=0; i<M88X_PHY_CNT; i++) {
-		err += bb_miiphy_read(NULL, devAddr+phyTab[i],M88X_PHY_CNTL,&val );
-		/* keep SpeedLSB, Duplex */
-		val &= 0x2100;
-		/* set SWReset, AnegEn, PwrDwn, RestartAneg */
-		val |= 0x9a00;
-		err += bb_miiphy_write(NULL, devAddr+phyTab[i],M88X_PHY_CNTL,val );
-	}
-	if (err) {
-		printf( "%s [ERR] reset phys\n",_f );
-		return( -1 );
-	}
-
-	/*** disable all ports ************************************************/
-	for (i=0, err=0; i<M88X_PRT_CNT; i++) {
-		err += bb_miiphy_read(NULL, devAddr+prtTab[i],M88X_PRT_CNTL,&val );
-		val &= 0xfffc;
-		err += bb_miiphy_write(NULL, devAddr+prtTab[i],M88X_PRT_CNTL,val );
-	}
-	if (err) {
-		printf( "%s [ERR] disable ports\n",_f );
-		return( -1 );
-	}
-
-	/*** initialize switch ************************************************/
-	/* set switch mac addr */
-#define ea eth_get_dev()->enetaddr
-	val = (ea[4] <<  8) | ea[5];
-	err = bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC45,val );
-	val = (ea[2] <<  8) | ea[3];
-	err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC23,val );
-	val = (ea[0] <<  8) | ea[1];
-#undef ea
-	val &= 0xfeff;		/* clear DiffAddr */
-	err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_MAC01,val );
-	if (err) {
-		printf( "%s [ERR] switch mac address register\n",_f );
-		return( -1 );
-	}
-
-	/* !DiscardExcessive, MaxFrameSize, CtrMode */
-	err = bb_miiphy_read(NULL, devAddr+15,M88X_GLB_CNTL,&val );
-	val &= 0xd870;
-	val |= 0x0500;
-	err += bb_miiphy_write(NULL, devAddr+15,M88X_GLB_CNTL,val );
-	if (err) {
-		printf( "%s [ERR] switch global control register\n",_f );
-		return( -1 );
-	}
-
-	/* LernDis off, ATUSize 1024, AgeTime 5min */
-	err = bb_miiphy_read(NULL, devAddr+15,M88X_ATU_CNTL,&val );
-	val &= 0x000f;
-	val |= 0x2130;
-	err += bb_miiphy_write(NULL, devAddr+15,M88X_ATU_CNTL,val );
-	if (err) {
-		printf( "%s [ERR] atu control register\n",_f );
-		return( -1 );
-	}
-
-	/*** initialize ports *************************************************/
-	for (i=0; i<M88X_PRT_CNT; i++) {
-		if ((p = prtCfg[i]) == NULL) {
-			continue;
-		}
-		while (p->reg != -1) {
-			err = 0;
-			err += bb_miiphy_read(NULL, devAddr+prtTab[i],p->reg,&val );
-			val &= p->msk;
-			val |= p->val;
-			err += bb_miiphy_write(NULL, devAddr+prtTab[i],p->reg,val );
-			if (err) {
-				printf( "%s [ERR] config port %d register %d\n",_f,i,p->reg );
-				/* XXX what todo */
-			}
-			p++;
-		}
-	}
-
-	/*** initialize phys **************************************************/
-	for (i=0; i<M88X_PHY_CNT; i++) {
-		if ((p = phyCfg[i]) == NULL) {
-			continue;
-		}
-		while (p->reg != -1) {
-			err = 0;
-			err += bb_miiphy_read(NULL, devAddr+phyTab[i],p->reg,&val );
-			val &= p->msk;
-			val |= p->val;
-			err += bb_miiphy_write(NULL, devAddr+phyTab[i],p->reg,val );
-			if (err) {
-				printf( "%s [ERR] config phy %d register %d\n",_f,i,p->reg );
-				/* XXX what todo */
-			}
-			p++;
-		}
-	}
-	udelay(100000);
-	return( 0 );
-}
-#endif
diff --git a/board/funkwerk/vovpn-gw/m88e6060.h b/board/funkwerk/vovpn-gw/m88e6060.h
deleted file mode 100644
index 5f7f6d1..0000000
--- a/board/funkwerk/vovpn-gw/m88e6060.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2004
- * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
- *
- * Support for the Elmeg VoVPN Gateway Module
- * ------------------------------------------
- * Initialize Marvell M88E6060 Switch
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _INC_m88e6060_h_
-#define _INC_m88e6060_h_
-
-/* ************************************************************************** */
-/* *** DEFINES ************************************************************** */
-
-/* switch hw */
-#define M88X_PRT_CNT			6
-#define M88X_PHY_CNT			5
-
-/* phy register offsets */
-#define M88X_PHY_CNTL			0x00
-#define M88X_PHY_STAT			0x00
-#define M88X_PHY_ID0			0x02
-#define M88X_PHY_ID1			0x03
-#define M88X_PHY_ANEG_ADV		0x04
-#define M88X_PHY_LPA			0x05
-#define M88X_PHY_ANEG_EXP		0x06
-#define M88X_PHY_NPT			0x07
-#define M88X_PHY_LPNP			0x08
-
-/* port register offsets */
-#define M88X_PRT_STAT			0x00
-#define M88X_PRT_ID			0x03
-#define M88X_PRT_CNTL			0x04
-#define M88X_PRT_VLAN			0x06
-#define M88X_PRT_PAV			0x0b
-#define M88X_PRT_RX			0x10
-#define M88X_PRT_TX			0x11
-
-/* global/atu register offsets */
-#define M88X_GLB_STAT			0x00
-#define M88X_GLB_MAC01			0x01
-#define M88X_GLB_MAC23			0x02
-#define M88X_GLB_MAC45			0x03
-#define M88X_GLB_CNTL			0x04
-#define M88X_ATU_CNTL			0x0a
-#define M88X_ATU_OP			0x0b
-
-/* id0 register - 0x02 */
-#define M88X_PHY_ID0_VALUE		0x0141
-
-/* id1 register - 0x03 */
-#define M88X_PHY_ID1_VALUE		0x0c80		/* without revision ! */
-
-
-/* misc */
-#define M88E6060_ID		((M88X_PHY_ID0_VALUE<<16) | M88X_PHY_ID1_VALUE)
-
-/* ************************************************************************** */
-/* *** TYPEDEFS ************************************************************* */
-
-typedef struct {
-	int		reg;
-	unsigned short	msk;
-	unsigned short	val;
-} m88x_regCfg_t;
-
-/* ************************************************************************** */
-/* *** PROTOTYPES *********************************************************** */
-
-extern int		m88e6060_initialize( int );
-
-#endif	/* _INC_m88e6060_h_ */
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
deleted file mode 100644
index c2aad6e..0000000
--- a/board/funkwerk/vovpn-gw/vovpn-gw.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * (C) Copyright 2004
- * Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
- *
- * Support for the Elmeg VoVPN Gateway Module
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <asm/m8260_pci.h>
-#include <miiphy.h>
-#include <linux/compiler.h>
-
-#include "m88e6060.h"
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-    /* Port A configuration */
-    {	/*	     conf ppar psor pdir podr pdat */
-	/* PA31 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1252           */
-	/* PA30 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    BP_RES           */
-	/* PA29 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1253           */
-	/* PA28 */ { 1,   1,   1,   1,   0,   0 }, /* FCC1   RMII TX_EN       */
-	/* PA27 */ { 1,   1,   1,   0,   0,   0 }, /* FCC1   RMII CRS_DV      */
-	/* PA26 */ { 1,   1,   1,   0,   0,   0 }, /* FCC1   RMII RX_ERR      */
-	/* PA25 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    HWID             */
-	/* PA24 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    HWID             */
-	/* PA23 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    HWID             */
-	/* PA22 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    HWID             */
-	/* PA21 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    HWID             */
-	/* PA20 */ { 1,   0,   0,   1,   0,   1 }, /* GPO    LED STATUS       */
-	/* PA19 */ { 1,   1,   0,   1,   0,   0 }, /* FCC1   RMII TxD[1]      */
-	/* PA18 */ { 1,   1,   0,   1,   0,   0 }, /* FCC1   RMII TxD[0]      */
-	/* PA17 */ { 1,   1,   0,   0,   0,   0 }, /* FCC1   RMII RxD[0]      */
-	/* PA16 */ { 1,   1,   0,   0,   0,   0 }, /* FCC1   RMII RxD[1]      */
-	/* PA15 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1255           */
-	/* PA14 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP????           */
-	/* PA13 */ { 1,   0,   0,   1,   0,   1 }, /* GPO    EN_BCTL1 XXX jse */
-	/* PA12 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    SWITCH RESET     */
-	/* PA11 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    DSP SL1 RESET    */
-	/* PA10 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    DSP SL2 RESET    */
-	/* PA9  */ { 1,   1,   0,   1,   0,   0 }, /* SMC2   TXD              */
-	/* PA8  */ { 1,   1,   0,   0,   0,   0 }, /* SMC2   RXD              */
-	/* PA7  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exit       */
-	/* PA6  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exit       */
-	/* PA5  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exit       */
-	/* PA4  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exit       */
-	/* PA3  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exit       */
-	/* PA2  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exit       */
-	/* PA1  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exit       */
-	/* PA0  */ { 0,   0,   0,   0,   0,   0 }  /* pin does not exit       */
-    },
-
-    /* Port B configuration */
-    {   /*	     conf ppar psor pdir podr pdat */
-	/* PB31 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1257           */
-	/* PB30 */ { 1,   1,   0,   0,   0,   0 }, /* FCC2   RMII CRS_DV      */
-	/* PB29 */ { 1,   1,   1,   1,   0,   0 }, /* FCC2   RMII TX_EN       */
-	/* PB28 */ { 1,   1,   0,   0,   0,   0 }, /* FCC2   RMII RX_ERR      */
-	/* PB27 */ { 1,   1,   1,   0,   1,   0 }, /* TDM_B2 L1TXD XXX val=0  */
-	/* PB26 */ { 1,   1,   1,   0,   1,   0 }, /* TDM_B2 L1RXD XXX val,dr */
-	/* PB25 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1259           */
-	/* PB24 */ { 1,   1,   1,   0,   0,   0 }, /* TDM_B2 L1RSYNC          */
-	/* PB23 */ { 1,   1,   0,   1,   0,   0 }, /* FCC2   RMII TxD[1]      */
-	/* PB22 */ { 1,   1,   0,   1,   0,   0 }, /* FCC2   RMII TxD[0]      */
-	/* PB21 */ { 1,   1,   0,   0,   0,   0 }, /* FCC2   RMII RxD[0]      */
-	/* PB20 */ { 1,   1,   0,   0,   0,   0 }, /* FCC2   RMII RxD[1]      */
-	/* PB19 */ { 1,   0,   0,   1,   0,   1 }, /* GPO    PHY MDC          */
-	/* PB18 */ { 1,   0,   0,   0,   0,   0 }, /* GPIO   PHY MDIO         */
-	/* PB17 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB16 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB15 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB14 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB13 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB12 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB11 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB10 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB9  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB8  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB7  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB6  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB5  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB4  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB3  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB2  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB1  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PB0  */ { 0,   0,   0,   0,   0,   0 }  /* pin does not exist      */
-    },
-
-    /* Port C */
-    {   /*	     conf ppar psor pdir podr pdat */
-	/* PC31 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PC30 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PC29 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1183           */
-	/* PC28 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1184           */
-	/* PC27 */ { 1,   1,   0,   0,   0,   0 }, /* CLK5   TDM_A1 RX        */
-	/* PC26 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1185           */
-	/* PC25 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1178           */
-	/* PC24 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1186           */
-	/* PC23 */ { 1,   1,   0,   0,   0,   0 }, /* CLK9   TDM_B2 RX        */
-	/* PC22 */ { 1,   1,   0,   0,   0,   0 }, /* CLK10  FCC1 RMII REFCLK */
-	/* PC21 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1187           */
-	/* PC20 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1182           */
-	/* PC19 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1188           */
-	/* PC18 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    HW RESET         */
-	/* PC17 */ { 1,   1,   0,   1,   0,   0 }, /* BRG8   SWITCH CLKIN     */
-	/* PC16 */ { 1,   1,   0,   0,   0,   0 }, /* CLK16  FCC2 RMII REFCLK */
-	/* PC15 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL1_MTYPE_3      */
-	/* PC14 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL1_MTYPE_2      */
-	/* PC13 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL1_MTYPE_1      */
-	/* PC12 */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL1_MTYPE_0      */
-	/* PC11 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1176           */
-	/* PC10 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1177           */
-	/* PC9  */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL2_MTYPE_3      */
-	/* PC8  */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL2_MTYPE_2      */
-	/* PC7  */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL2_MTYPE_1      */
-	/* PC6  */ { 1,   0,   0,   0,   0,   0 }, /* GPI    SL2_MTYPE_0      */
-	/* PC5  */ { 1,   1,   0,   1,   0,   0 }, /* SMC1   TXD              */
-	/* PC4  */ { 1,   1,   0,   0,   0,   0 }, /* SMC1   RXD              */
-	/* PC3  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PC2  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PC1  */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1192           */
-	/* PC0  */ { 1,   0,   0,   0,   0,   0 }, /* GPI    RACK             */
-    },
-
-    /* Port D */
-    {   /*	     conf ppar psor pdir podr pdat */
-	/* PD31 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1193           */
-	/* PD30 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1194           */
-	/* PD29 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1195           */
-	/* PD28 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD27 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD26 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD25 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1179           */
-	/* PD24 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1180           */
-	/* PD23 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1181           */
-	/* PD22 */ { 1,   1,   1,   0,   1,   0 }, /* TDM_A2 L1TXD            */
-	/* PD21 */ { 1,   1,   1,   0,   1,   0 }, /* TDM_A2 L1RXD            */
-	/* PD20 */ { 1,   1,   1,   0,   0,   0 }, /* TDM_A2 L1RSYNC          */
-	/* PD19 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1196           */
-	/* PD18 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1197           */
-	/* PD17 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1198           */
-	/* PD16 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1199           */
-	/* PD15 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1250           */
-	/* PD14 */ { 1,   0,   0,   1,   0,   0 }, /* GPO    TP1251           */
-	/* PD13 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD12 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD11 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD10 */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD9  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD8  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD7  */ { 0,   0,   0,   1,   0,   0 }, /* GPO    FL_BYTE          */
-	/* PD6  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD5  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD4  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD3  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD2  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD1  */ { 0,   0,   0,   0,   0,   0 }, /* pin does not exist      */
-	/* PD0  */ { 0,   0,   0,   0,   0,   0 }  /* pin does not exist      */
-    }
-};
-
-void reset_phy (void)
-{
-	volatile ioport_t *iop;
-#if defined(CONFIG_CMD_NET)
-	int i;
-	unsigned short val;
-#endif
-
-	iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0);
-
-	/* Reset the PHY */
-	iop->pdat &= 0xfff7ffff;	/* PA12 = |SWITCH_RESET */
-#if defined(CONFIG_CMD_NET)
-	udelay(20000);
-	iop->pdat |= 0x00080000;
-	for (i=0; i<100; i++) {
-		udelay(20000);
-		if (bb_miiphy_read("FCC1", CONFIG_SYS_PHY_ADDR,2,&val ) == 0) {
-			break;
-		}
-	}
-	/* initialize switch */
-	m88e6060_initialize( CONFIG_SYS_PHY_ADDR );
-#endif
-}
-
-static unsigned long UPMATable[] = {
-	0x8fffec00,  0x0ffcfc00,  0x0ffcfc00,  0x0ffcfc00, /* Words 0 to 3	*/
-	0x0ffcfc04,  0x3ffdfc00,  0xfffffc01,  0xfffffc01, /* Words 4 to 7	*/
-	0xfffffc00,  0xfffffc04,  0xfffffc01,  0xfffffc00, /* Words 8 to 11	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 12 to 15	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 16 to 19	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 20 to 23	*/
-	0x8fffec00,  0x00fffc00,  0x00fffc00,  0x00fffc00, /* Words 24 to 27	*/
-	0x0ffffc04,  0xfffffc01,  0xfffffc01,  0xfffffc01, /* Words 28 to 31	*/
-	0xfffffc00,  0xfffffc01,  0xfffffc01,  0xfffffc00, /* Words 32 to 35	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 36 to 39	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 40 to 43	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 44 to 47	*/
-	0xfffffc00,  0xfffffc04,  0xfffffc01,  0xfffffc00, /* Words 48 to 51	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc00, /* Words 52 to 55	*/
-	0xfffffc00,  0xfffffc00,  0xfffffc00,  0xfffffc01, /* Words 56 to 59	*/
-	0xffffec00,  0xffffec04,  0xffffec00,  0xfffffc01  /* Words 60 to 63	*/
-};
-
-int board_early_init_f (void)
-{
-	volatile immap_t *immap;
-	volatile memctl8260_t *memctl;
-	volatile unsigned char *dummy;
-	int i;
-
-	immap = (immap_t *) CONFIG_SYS_IMMR;
-	memctl = &immap->im_memctl;
-
-#if 0
-	/* CS2-5 - DSP via UPMA */
-	dummy = (volatile unsigned char *) (memctl->memc_br2 & BRx_BA_MSK);
-	memctl->memc_mar = 0;
-	memctl->memc_mamr = MxMR_OP_WARR;
-	for (i = 0; i < 64; i++) {
-		memctl->memc_mdr = UPMATable[i];
-		*dummy = 0;
-	}
-	memctl->memc_mamr = 0x00044440;
-#else
-	/* CS7 - DPRAM via UPMA */
-	dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK);
-	memctl->memc_mar = 0;
-	memctl->memc_mamr = MxMR_OP_WARR;
-	for (i = 0; i < 64; i++) {
-		memctl->memc_mdr = UPMATable[i];
-		*dummy = 0;
-	}
-	memctl->memc_mamr = 0x00044440;
-#endif
-	return 0;
-}
-
-int misc_init_r (void)
-{
-	volatile ioport_t *iop;
-	__maybe_unused unsigned char temp;
-#if 0
-	/* DUMP UPMA RAM */
-	volatile immap_t *immap;
-	volatile memctl8260_t *memctl;
-	volatile unsigned char *dummy;
-	unsigned char c;
-	int i;
-
-	immap = (immap_t *) CONFIG_SYS_IMMR;
-	memctl = &immap->im_memctl;
-
-
-	dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK);
-	memctl->memc_mar = 0;
-	memctl->memc_mamr = MxMR_OP_RARR;
-	for (i = 0; i < 64; i++) {
-		c = *dummy;
-		printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i,
-			memctl->memc_mamr,
-			memctl->memc_mar,
-			memctl->memc_mdr );
-	}
-	memctl->memc_mamr = 0x00044440;
-#endif
-	/* enable buffers (DSP, DPRAM) */
-	iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 0);
-	iop->pdat &= 0xfffbffff;	/* PA13 = |EN_M_BCTL1 */
-
-	/* destroy DPRAM magic */
-	*(volatile unsigned char *)0xf0500000 = 0x00;
-
-	/* clear any pending DPRAM irq */
-	temp = *(volatile unsigned char *)0xf05003ff;
-
-	/* write module-id into DPRAM */
-	*(volatile unsigned char *)0xf0500201 = 0x50;
-
-	return 0;
-}
-
-#if defined(CONFIG_HAVE_OWN_RESET)
-int
-do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	volatile ioport_t *iop;
-
-	iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 2);
-	iop->pdat |= 0x00002000;	/* PC18 = HW_RESET */
-	return 1;
-}
-#endif	/* CONFIG_HAVE_OWN_RESET */
-
-#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
-
-phys_size_t initdram (int board_type)
-{
-#ifndef CONFIG_SYS_RAMBOOT
-	volatile immap_t *immap;
-	volatile memctl8260_t *memctl;
-	volatile uchar *ramaddr;
-	int i;
-	uchar c;
-
-	immap = (immap_t *) CONFIG_SYS_IMMR;
-	memctl = &immap->im_memctl;
-	ramaddr = (uchar *) CONFIG_SYS_SDRAM_BASE;
-	c = 0xff;
-
-	immap->im_siu_conf.sc_ppc_acr  = 0x02;
-	immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
-	immap->im_siu_conf.sc_ppc_alrl = 0x89abcdef;
-	immap->im_siu_conf.sc_tescr1   = 0x00000000;
-	immap->im_siu_conf.sc_tescr2   = 0x00000000;
-
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-	memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | CONFIG_SYS_BR1_PRELIM;
-
-	/* Precharge all banks */
-	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x28000000;
-	*ramaddr = c;
-
-	/* CBR refresh */
-	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x08000000;
-	for (i = 0; i < 8; i++)
-		*ramaddr = c;
-
-	/* Mode Register write */
-	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x18000000;
-	*ramaddr = c;
-
-	/* Refresh enable */
-	memctl->memc_psdmr = CONFIG_SYS_PSDMR | 0x40000000;
-	*ramaddr = c;
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	return (CONFIG_SYS_SDRAM_SIZE);
-}
-
-int checkboard (void)
-{
-#ifdef CONFIG_CLKIN_66MHz
-	puts ("Board: Elmeg VoVPN Gateway Module (66MHz)\n");
-#else
-	puts ("Board: Elmeg VoVPN Gateway Module (100MHz)\n");
-#endif
-	return 0;
-}