Tegra: MMC: Add DT support to MMC driver for all T20 boards

tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc.
Tested on Seaboard, fully functional.

Tamonten boards (medcom-wide, plutux, and tec) use a different/new
dtsi file w/common settings.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>

8 files changed, 40 insertions, 145 deletions

diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c
index e6a932e..ea95e43 100644
--- a/board/avionic-design/common/tamonten.c
+++ b/board/avionic-design/common/tamonten.c
@@ -33,13 +33,8 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/board.h>
 #include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/arch-tegra/sys_proto.h>
 #include <asm/arch-tegra/uart.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 void gpio_early_init(void)
@@ -54,7 +49,7 @@ void gpio_early_init(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
 	/* for write-protect GPIO PI6 */
@@ -62,16 +57,4 @@ static void pin_mux_mmc(void)
 	/* for CD GPIO PH2 */
 	pinmux_tristate_disable(PINGRP_ATD);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	/* init dev 0, SD slot, with 4-bit bus */
-	tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
-
-	return 0;
-}
 #endif
diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c
index 1447f47..d6e5c37 100644
--- a/board/compal/paz00/paz00.c
+++ b/board/compal/paz00/paz00.c
@@ -18,19 +18,14 @@
 #include <asm/io.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
 #ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	/* SDMMC4: config 3, x8 on 2nd set of pins */
 	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
@@ -51,25 +46,6 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PV5 */
 	pinmux_tristate_disable(PINGRP_GPV);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 8-bit bus */
-	tegra_mmc_init(0, 8, -1, -1);
-
-	debug("board_mmc_init: init SD slot\n");
-	/* init dev 3, SD slot, with 4-bit bus */
-	tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
-
-	return 0;
-}
 #endif
 
 #ifdef CONFIG_LCD
diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c
index 8f4dd09..8401100 100644
--- a/board/compulab/trimslice/trimslice.c
+++ b/board/compulab/trimslice/trimslice.c
@@ -27,12 +27,8 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
 #include <i2c.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
 
 void pin_mux_usb(void)
 {
@@ -52,7 +48,7 @@ void pin_mux_spi(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC1, FUNCMUX_SDMMC1_SDIO1_4BIT);
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
@@ -60,20 +56,3 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PP1 */
 	pinmux_tristate_disable(PINGRP_DAP3);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	/* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
-	tegra_mmc_init(0, 4, -1, GPIO_PP1);
-
-	/* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
-	tegra_mmc_init(3, 4, -1, -1);
-
-	return 0;
-}
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 665fa1c..babbe08 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -48,6 +48,9 @@
 #ifdef CONFIG_USB_EHCI_TEGRA
 #include <asm/arch-tegra/usb.h>
 #endif
+#ifdef CONFIG_TEGRA_MMC
+#include <asm/arch-tegra/mmc.h>
+#endif
 #include <i2c.h>
 #include <spi.h>
 #include "emc.h"
@@ -221,3 +224,25 @@ int board_late_init(void)
 #endif
 	return 0;
 }
+
+#if defined(CONFIG_TEGRA_MMC)
+void __pin_mux_mmc(void)
+{
+}
+
+void pin_mux_mmc(void) __attribute__((weak, alias("__pin_mux_mmc")));
+
+/* this is a weak define that we are overriding */
+int board_mmc_init(bd_t *bd)
+{
+	debug("%s called\n", __func__);
+
+	/* Enable muxes, etc. for SDMMC controllers */
+	pin_mux_mmc();
+
+	debug("%s: init MMC\n", __func__);
+	tegra_mmc_init();
+
+	return 0;
+}
+#endif
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 93430ed..3122441 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -27,19 +27,14 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
 #ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
 	funcmux_select(PERIPH_ID_SDMMC2, FUNCMUX_SDMMC2_DTA_DTD_8BIT);
@@ -54,25 +49,6 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PI5 */
 	pinmux_tristate_disable(PINGRP_ATC);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	debug("board_mmc_init: init SD slot J26\n");
-	/* init dev 0, SD slot J26, with 8-bit bus */
-	tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2);
-
-	debug("board_mmc_init: init SD slot J5\n");
-	/* init dev 2, SD slot J5, with 4-bit bus */
-	tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
-
-	return 0;
-}
 #endif
 
 void pin_mux_usb(void)
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 3e33da0..e581fdd 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -28,11 +28,7 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
 
 /* TODO: Remove this code when the SPI switch is working */
 #if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
@@ -51,7 +47,7 @@ void gpio_early_init_uart(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
 	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
@@ -61,25 +57,6 @@ static void pin_mux_mmc(void)
 	/* For CD GPIO PI5 */
 	pinmux_tristate_disable(PINGRP_ATC);
 }
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 8-bit bus */
-	tegra_mmc_init(0, 8, -1, -1);
-
-	debug("board_mmc_init: init SD slot\n");
-	/* init dev 1, SD slot, with 4-bit bus */
-	tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
-
-	return 0;
-}
 #endif
 
 void pin_mux_usb(void)
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 592cd6b..f18aa27 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -27,32 +27,19 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
 #include <i2c.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
-
 
+#ifdef CONFIG_TEGRA_MMC
 /*
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
-{
-	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
-	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
+void pin_mux_mmc(void)
 {
 	uchar val;
 	int ret;
 
-	debug("board_mmc_init called\n");
-
 	/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
 	ret = i2c_set_bus_num(0);
 	if (ret)
@@ -70,17 +57,10 @@ int board_mmc_init(bd_t *bd)
 	if (ret)
 		printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
 
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-
-	/* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */
-	tegra_mmc_init(0, 8, -1, -1);
-
-	/* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */
-	tegra_mmc_init(1, 8, -1, -1);
-
-	return 0;
+	funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
+	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
 }
+#endif
 
 /* this is a weak define that we are overriding */
 void pin_mux_usb(void)
diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
index e40a986..aa76f65 100644
--- a/board/toradex/colibri_t20_iris/colibri_t20_iris.c
+++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
@@ -19,7 +19,6 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/mmc.h>
 
 #include "../colibri_t20-common/colibri_t20-common.h"
 
@@ -34,13 +33,13 @@ void pin_mux_usb(void)
 #endif
 
 #ifdef CONFIG_TEGRA_MMC
-int board_mmc_init(bd_t *bd)
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+void pin_mux_mmc(void)
 {
 	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
 	pinmux_tristate_disable(PINGRP_GMB);
-
-	tegra_mmc_init(0, 4, -1, GPIO_PC7);
-
-	return 0;
 }
 #endif