Merge branch 'master' of ssh://mercury/home/wd/git/u-boot/master

44 files changed, 2167 insertions, 208 deletions

diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index eedde59..891b4d9 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -165,16 +165,20 @@ unsigned char spi_read(void)
 	return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15);
 }
 
-void taihu_spi_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 {
-	gpio_write_bit(SPI_CS_GPIO0, cs);
+	return bus == 0 && cs == 0;
 }
 
-spi_chipsel_type spi_chipsel[]= {
-	taihu_spi_chipsel
-};
+void spi_cs_activate(struct spi_slave *slave)
+{
+	gpio_write_bit(SPI_CS_GPIO0, 1);
+}
 
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	gpio_write_bit(SPI_CS_GPIO0, 0);
+}
 
 #ifdef CONFIG_PCI
 static unsigned char int_lines[32] = {
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
index e33af76..f2b9c12 100644
--- a/board/atmel/at91cap9adk/Makefile
+++ b/board/atmel/at91cap9adk/Makefile
@@ -2,6 +2,10 @@
 # (C) Copyright 2003-2008
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
 # See file CREDITS for list of people who contributed to this
 # project.
 #
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
index 5de52b9..a3eaf19 100644
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ b/board/atmel/at91cap9adk/at91cap9adk.c
@@ -30,6 +30,8 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
@@ -70,6 +72,33 @@ static void at91cap9_serial_hw_init(void)
 #endif
 }
 
+static void at91cap9_slowclock_hw_init(void)
+{
+	/*
+	 * On AT91CAP9 revC CPUs, the slow clock can be based on an
+	 * internal impreciseRC oscillator or an external 32kHz oscillator.
+	 * Switch to the latter.
+	 */
+#define ARCH_ID_AT91CAP9_REVB	0x399
+#define ARCH_ID_AT91CAP9_REVC	0x601
+	if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
+		unsigned i, tmp = at91_sys_read(AT91_SCKCR);
+		if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
+			extern void timer_init(void);
+			timer_init();
+			tmp |= AT91CAP9_SCKCR_OSC32EN;
+			at91_sys_write(AT91_SCKCR, tmp);
+			for (i = 0; i < 1200; i++)
+				udelay(1000);
+			tmp |= AT91CAP9_SCKCR_OSCSEL_32;
+			at91_sys_write(AT91_SCKCR, tmp);
+			udelay(200);
+			tmp &= ~AT91CAP9_SCKCR_RCEN;
+			at91_sys_write(AT91_SCKCR, tmp);
+		}
+	}
+}
+
 static void at91cap9_nor_hw_init(void)
 {
 	unsigned long csa;
@@ -116,7 +145,12 @@ static void at91cap9_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-		       AT91_SMC_DBW_8 | AT91_SMC_TDF_(1));
+#ifdef CFG_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(1));
 
 	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
 
@@ -228,6 +262,65 @@ static void at91cap9_uhp_hw_init(void)
 }
 #endif
 
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	vl_col:		240,
+	vl_row:		320,
+	vl_clk:		4965000,
+	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
+			ATMEL_LCDC_INVFRAME_INVERTED,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	5,
+	vl_left_margin:	1,
+	vl_right_margin:33,
+	vl_vsync_len:	1,
+	vl_upper_margin:1,
+	vl_lower_margin:0,
+	mmio:		AT91CAP9_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PC0, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PC0, 1);  /* power down */
+}
+
+static void at91cap9_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
+	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
+	at91_set_A_periph(AT91_PIN_PC25, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
+
+	gd->fb_base = 0;
+}
+#endif
+
 int board_init(void)
 {
 	/* Enable Ctrlc */
@@ -239,6 +332,7 @@ int board_init(void)
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
 	at91cap9_serial_hw_init();
+	at91cap9_slowclock_hw_init();
 	at91cap9_nor_hw_init();
 #ifdef CONFIG_CMD_NAND
 	at91cap9_nand_hw_init();
@@ -252,7 +346,9 @@ int board_init(void)
 #ifdef CONFIG_USB_OHCI_NEW
 	at91cap9_uhp_hw_init();
 #endif
-
+#ifdef CONFIG_LCD
+	at91cap9_lcd_hw_init();
+#endif
 	return 0;
 }
 
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 28091a4..0432ef1 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -63,6 +63,9 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+	nand->options = NAND_BUSWIDTH_16;
+#endif
 	nand->hwcontrol = at91cap9adk_nand_hwcontrol;
 	nand->chip_delay = 20;
 
diff --git a/board/atmel/at91cap9adk/u-boot.lds b/board/atmel/at91cap9adk/u-boot.lds
deleted file mode 100644
index 996f401..0000000
--- a/board/atmel/at91cap9adk/u-boot.lds
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-	  cpu/arm926ejs/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile
index e6e4082..f93540a 100644
--- a/board/atmel/at91sam9260ek/Makefile
+++ b/board/atmel/at91sam9260ek/Makefile
@@ -2,6 +2,10 @@
 # (C) Copyright 2003-2008
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
 # See file CREDITS for list of people who contributed to this
 # project.
 #
diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c
index b30aad8..ef4d486 100644
--- a/board/atmel/at91sam9260ek/at91sam9260ek.c
+++ b/board/atmel/at91sam9260ek/at91sam9260ek.c
@@ -90,7 +90,12 @@ static void at91sam9260ek_nand_hw_init(void)
 	at91_sys_write(AT91_SMC_MODE(3),
 		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		       AT91_SMC_EXNWMODE_DISABLE |
-		       AT91_SMC_DBW_8 | AT91_SMC_TDF_(2));
+#ifdef CFG_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(2));
 
 	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
 
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
index 7c1e6ab..9738f0f 100644
--- a/board/atmel/at91sam9260ek/nand.c
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -68,6 +68,9 @@ static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
 int board_nand_init(struct nand_chip *nand)
 {
 	nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+	nand->options = NAND_BUSWIDTH_16;
+#endif
 	nand->hwcontrol = at91sam9260ek_nand_hwcontrol;
 	nand->dev_ready = at91sam9260ek_nand_ready;
 	nand->chip_delay = 20;
diff --git a/board/atmel/at91sam9260ek/u-boot.lds b/board/atmel/at91sam9260ek/u-boot.lds
deleted file mode 100644
index 996f401..0000000
--- a/board/atmel/at91sam9260ek/u-boot.lds
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-	  cpu/arm926ejs/start.o	(.text)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile
new file mode 100644
index 0000000..7702a9c
--- /dev/null
+++ b/board/atmel/at91sam9261ek/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9261ek.o
+COBJS-y += led.o
+COBJS-y	+= partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
new file mode 100644
index 0000000..3de234c
--- /dev/null
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -0,0 +1,258 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91sam9261_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9261ek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_set_A_periph(AT91_PIN_PC8, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);		/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+	at91_set_A_periph(AT91_PIN_PC12, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PC13, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+	at91_set_A_periph(AT91_PIN_PC14, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PC15, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_set_A_periph(AT91_PIN_PA9, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PA10, 1);		/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9261ek_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) |
+		       AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(1));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(AT91_PIN_PC15, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(AT91_PIN_PC14, 1);
+
+	at91_set_A_periph(AT91_PIN_PC0, 0);	/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9261ek_spi_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA3, 0);	/* SPI0_NPCS0 */
+
+	at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+	at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+	at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+static void at91sam9261ek_dm9000_hw_init(void)
+{
+	/* Configure SMC CS2 for DM9000 */
+	at91_sys_write(AT91_SMC_SETUP(2),
+		       AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(2),
+		       AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
+		       AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
+	at91_sys_write(AT91_SMC_CYCLE(2),
+		       AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
+	at91_sys_write(AT91_SMC_MODE(2),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+		       AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
+		       AT91_SMC_TDF_(1));
+
+	/* Configure Reset signal as output */
+	at91_set_gpio_output(AT91_PIN_PC10, 0);
+
+	/* Configure Interrupt pin as input, no pull-up */
+	at91_set_gpio_input(AT91_PIN_PC11, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	vl_col:		240,
+	vl_row:		320,
+	vl_clk:		4965000,
+	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
+			ATMEL_LCDC_INVFRAME_INVERTED,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	5,
+	vl_left_margin:	1,
+	vl_right_margin:33,
+	vl_vsync_len:	1,
+	vl_upper_margin:1,
+	vl_lower_margin:0,
+	mmio:		AT91SAM9261_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA12, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA12, 1);  /* power down */
+}
+
+static void at91sam9261ek_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PB1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PB2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PB3, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PB4, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PB7, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PB8, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PB10, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PB11, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PB12, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PB15, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PB16, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PB17, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PB19, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PB20, 0);	/* LCDD15 */
+	at91_set_B_periph(AT91_PIN_PB23, 0);	/* LCDD18 */
+	at91_set_B_periph(AT91_PIN_PB24, 0);	/* LCDD19 */
+	at91_set_B_periph(AT91_PIN_PB25, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PB26, 0);	/* LCDD21 */
+	at91_set_B_periph(AT91_PIN_PB27, 0);	/* LCDD22 */
+	at91_set_B_periph(AT91_PIN_PB28, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+
+	gd->fb_base = AT91SAM9261_SRAM_BASE;
+}
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9261EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91sam9261ek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9261ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91sam9261ek_spi_hw_init();
+#endif
+#ifdef CONFIG_DRIVER_DM9000
+	at91sam9261ek_dm9000_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	at91sam9261ek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_DRIVER_DM9000
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/atmel/at91sam9261ek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c
new file mode 100644
index 0000000..eb2bb23
--- /dev/null
+++ b/board/atmel/at91sam9261ek/led.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define	RED_LED		AT91_PIN_PA23	/* this is the power led */
+#define	GREEN_LED	AT91_PIN_PA13	/* this is the user1 led */
+#define	YELLOW_LED	AT91_PIN_PA14	/* this is the user2 led */
+
+void red_LED_on(void)
+{
+	at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+	at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+	at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+	at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+	at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+	at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
+
+	at91_set_gpio_output(RED_LED, 1);
+	at91_set_gpio_output(GREEN_LED, 1);
+	at91_set_gpio_output(YELLOW_LED, 1);
+
+	at91_set_gpio_value(RED_LED, 0);
+	at91_set_gpio_value(GREEN_LED, 1);
+	at91_set_gpio_value(YELLOW_LED, 1);
+}
diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c
new file mode 100644
index 0000000..35b26db
--- /dev/null
+++ b/board/atmel/at91sam9261ek/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9261.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+#define	MASK_ALE	(1 << 22)	/* our ALE is AD22 */
+#define	MASK_CLE	(1 << 21)	/* our CLE is AD21 */
+
+static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+	IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+	switch (cmd) {
+	case NAND_CTL_SETCLE:
+		IO_ADDR_W |= MASK_CLE;
+		break;
+	case NAND_CTL_SETALE:
+		IO_ADDR_W |= MASK_ALE;
+		break;
+	case NAND_CTL_CLRNCE:
+		at91_set_gpio_value(AT91_PIN_PC14, 1);
+		break;
+	case NAND_CTL_SETNCE:
+		at91_set_gpio_value(AT91_PIN_PC14, 0);
+		break;
+	}
+	this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
+{
+	return at91_get_gpio_value(AT91_PIN_PC15);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+	nand->options = NAND_BUSWIDTH_16;
+#endif
+	nand->hwcontrol = at91sam9261ek_nand_hwcontrol;
+	nand->dev_ready = at91sam9261ek_nand_ready;
+	nand->chip_delay = 20;
+
+	return 0;
+}
diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c
new file mode 100644
index 0000000..975be17
--- /dev/null
+++ b/board/atmel/at91sam9261ek/partition.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+	{CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
+};
diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile
new file mode 100644
index 0000000..5adb0bc
--- /dev/null
+++ b/board/atmel/at91sam9263ek/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9263ek.o
+COBJS-y += led.o
+COBJS-y	+= partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
new file mode 100644
index 0000000..ba7fc71
--- /dev/null
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/sizes.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91sam9263_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9263ek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_set_A_periph(AT91_PIN_PA26, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA27, 0);		/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9263ek_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	at91_sys_write(AT91_MATRIX_EBI0CSA,
+		       csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
+		       AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(2));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
+				      1 << AT91SAM9263_ID_PIOCDE);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(AT91_PIN_PA22, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(AT91_PIN_PD15, 1);
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9263ek_spi_hw_init(void)
+{
+	at91_set_B_periph(AT91_PIN_PA5, 0);	/* SPI0_NPCS0 */
+
+	at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
+	at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
+	at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+static void at91sam9263ek_macb_hw_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+
+	/*
+	 * Disable pull-up on:
+	 *	RXDV (PC25) => PHY normal mode (not Test mode)
+	 * 	ERX0 (PE25) => PHY ADDR0
+	 *	ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
+	 *
+	 * PHY has internal pull-down
+	 */
+	writel(pin_to_mask(AT91_PIN_PC25),
+	       pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
+	writel(pin_to_mask(AT91_PIN_PE25) |
+	       pin_to_mask(AT91_PIN_PE26),
+	       pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
+
+	/* Need to reset PHY -> 500ms reset */
+	at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
+				     AT91_RSTC_ERSTL | (0x0D << 8) |
+				     AT91_RSTC_URSTEN);
+
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+
+	/* Wait for end hardware reset */
+	while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+
+	/* Re-enable pull-up */
+	writel(pin_to_mask(AT91_PIN_PC25),
+	       pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
+	writel(pin_to_mask(AT91_PIN_PE25) |
+	       pin_to_mask(AT91_PIN_PE26),
+	       pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
+
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* ETXCK_EREFCK */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* EMDC */
+
+#ifndef CONFIG_RMII
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* ECRS */
+	at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
+	at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
+	at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
+	at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
+	at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
+	at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
+#endif
+
+}
+#endif
+
+#ifdef CONFIG_USB_OHCI_NEW
+static void at91sam9263ek_uhp_hw_init(void)
+{
+	/* Enable VBus on UHP ports */
+	at91_set_gpio_output(AT91_PIN_PA21, 0);
+	at91_set_gpio_output(AT91_PIN_PA24, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	vl_col:		240,
+	vl_row:		320,
+	vl_clk:		4965000,
+	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
+			ATMEL_LCDC_INVFRAME_INVERTED,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	5,
+	vl_left_margin:	1,
+	vl_right_margin:33,
+	vl_vsync_len:	1,
+	vl_upper_margin:1,
+	vl_lower_margin:0,
+	mmio:		AT91SAM9263_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA30, 1);  /* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA30, 0);  /* power down */
+}
+
+static void at91sam9263ek_lcd_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
+	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
+	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+
+	gd->fb_base = AT91SAM9263_SRAM0_BASE;
+}
+#endif
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9263EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91sam9263ek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9263ek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91sam9263ek_spi_hw_init();
+#endif
+#ifdef CONFIG_MACB
+	at91sam9263ek_macb_hw_init();
+#endif
+#ifdef CONFIG_USB_OHCI_NEW
+	at91sam9263ek_uhp_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	at91sam9263ek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_MACB
+	/*
+	 * Initialize ethernet HW addr prior to starting Linux,
+	 * needed for nfsroot
+	 */
+	eth_init(gd->bd);
+#endif
+}
+#endif
diff --git a/board/atmel/at91sam9263ek/config.mk b/board/atmel/at91sam9263ek/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/atmel/at91sam9263ek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c
new file mode 100644
index 0000000..eb8d6ca
--- /dev/null
+++ b/board/atmel/at91sam9263ek/led.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define	RED_LED		AT91_PIN_PB7	/* this is the power led */
+#define	GREEN_LED	AT91_PIN_PB8	/* this is the user1 led */
+#define	YELLOW_LED	AT91_PIN_PC29	/* this is the user2 led */
+
+void red_LED_on(void)
+{
+	at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+	at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+	at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+	at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+	at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+	at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
+				      1 << AT91SAM9263_ID_PIOCDE);
+
+	at91_set_gpio_output(RED_LED, 1);
+	at91_set_gpio_output(GREEN_LED, 1);
+	at91_set_gpio_output(YELLOW_LED, 1);
+
+	at91_set_gpio_value(RED_LED, 0);
+	at91_set_gpio_value(GREEN_LED, 1);
+	at91_set_gpio_value(YELLOW_LED, 1);
+}
diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c
new file mode 100644
index 0000000..5079972
--- /dev/null
+++ b/board/atmel/at91sam9263ek/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+#define	MASK_ALE	(1 << 21)	/* our ALE is AD21 */
+#define	MASK_CLE	(1 << 22)	/* our CLE is AD22 */
+
+static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+	IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+	switch (cmd) {
+	case NAND_CTL_SETCLE:
+		IO_ADDR_W |= MASK_CLE;
+		break;
+	case NAND_CTL_SETALE:
+		IO_ADDR_W |= MASK_ALE;
+		break;
+	case NAND_CTL_CLRNCE:
+		at91_set_gpio_value(AT91_PIN_PD15, 1);
+		break;
+	case NAND_CTL_SETNCE:
+		at91_set_gpio_value(AT91_PIN_PD15, 0);
+		break;
+	}
+	this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
+{
+	return at91_get_gpio_value(AT91_PIN_PA22);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+	nand->options = NAND_BUSWIDTH_16;
+#endif
+	nand->hwcontrol = at91sam9263ek_nand_hwcontrol;
+	nand->dev_ready = at91sam9263ek_nand_ready;
+	nand->chip_delay = 20;
+
+	return 0;
+}
diff --git a/board/atmel/at91sam9263ek/partition.c b/board/atmel/at91sam9263ek/partition.c
new file mode 100644
index 0000000..eb1a724
--- /dev/null
+++ b/board/atmel/at91sam9263ek/partition.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
+};
diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile
new file mode 100644
index 0000000..a86a926
--- /dev/null
+++ b/board/atmel/at91sam9rlek/Makefile
@@ -0,0 +1,57 @@
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian.pop@leadtechdesign.com>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y += at91sam9rlek.o
+COBJS-y += led.o
+COBJS-y	+= partition.o
+COBJS-$(CONFIG_CMD_NAND) += nand.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c
new file mode 100644
index 0000000..10423d2
--- /dev/null
+++ b/board/atmel/at91sam9rlek/at91sam9rlek.c
@@ -0,0 +1,215 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91sam9rl_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+static void at91sam9rlek_serial_hw_init(void)
+{
+#ifdef CONFIG_USART0
+	at91_set_A_periph(AT91_PIN_PA6, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
+#endif
+
+#ifdef CONFIG_USART1
+	at91_set_A_periph(AT91_PIN_PA11, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PA12, 0);		/* RXD1 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
+#endif
+
+#ifdef CONFIG_USART2
+	at91_set_A_periph(AT91_PIN_PA13, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PA14, 0);		/* RXD2 */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
+#endif
+
+#ifdef CONFIG_USART3	/* DBGU */
+	at91_set_A_periph(AT91_PIN_PA21, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PA22, 1);		/* DTXD */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
+#endif
+}
+
+#ifdef CONFIG_CMD_NAND
+static void at91sam9rlek_nand_hw_init(void)
+{
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA,
+		       csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	at91_sys_write(AT91_SMC_SETUP(3),
+		       AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
+		       AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(3),
+		       AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) |
+		       AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5));
+	at91_sys_write(AT91_SMC_CYCLE(3),
+		       AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7));
+	at91_sys_write(AT91_SMC_MODE(3),
+		       AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		       AT91_SMC_EXNWMODE_DISABLE |
+#ifdef CFG_NAND_DBW_16
+		       AT91_SMC_DBW_16 |
+#else /* CFG_NAND_DBW_8 */
+		       AT91_SMC_DBW_8 |
+#endif
+		       AT91_SMC_TDF_(1));
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(AT91_PIN_PD17, 1);
+
+	/* Enable NandFlash */
+	at91_set_gpio_output(AT91_PIN_PB6, 1);
+
+	at91_set_A_periph(AT91_PIN_PB4, 0);		/* NANDOE */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+static void at91sam9rlek_spi_hw_init(void)
+{
+	at91_set_A_periph(AT91_PIN_PA28, 0);	/* SPI0_NPCS0 */
+
+	at91_set_A_periph(AT91_PIN_PA25, 0);	/* SPI0_MISO */
+	at91_set_A_periph(AT91_PIN_PA26, 0);	/* SPI0_MOSI */
+	at91_set_A_periph(AT91_PIN_PA27, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	vl_col:		240,
+	vl_row:		320,
+	vl_clk:		4965000,
+	vl_sync:	ATMEL_LCDC_INVLINE_INVERTED |
+			ATMEL_LCDC_INVFRAME_INVERTED,
+	vl_bpix:	3,
+	vl_tft:		1,
+	vl_hsync_len:	5,
+	vl_left_margin:	1,
+	vl_right_margin:33,
+	vl_vsync_len:	1,
+	vl_upper_margin:1,
+	vl_lower_margin:0,
+	mmio:		AT91SAM9RL_LCDC_BASE,
+};
+
+void lcd_enable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA30, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+	at91_set_gpio_value(AT91_PIN_PA30, 1);  /* power down */
+}
+static void at91sam9rlek_lcd_hw_init(void)
+{
+	at91_set_B_periph(AT91_PIN_PC1, 0);	/* LCDPWR */
+	at91_set_A_periph(AT91_PIN_PC5, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDCC */
+	at91_set_B_periph(AT91_PIN_PC9, 0);	/* LCDD3 */
+	at91_set_B_periph(AT91_PIN_PC10, 0);	/* LCDD4 */
+	at91_set_B_periph(AT91_PIN_PC11, 0);	/* LCDD5 */
+	at91_set_B_periph(AT91_PIN_PC12, 0);	/* LCDD6 */
+	at91_set_B_periph(AT91_PIN_PC13, 0);	/* LCDD7 */
+	at91_set_B_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
+	at91_set_B_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
+	at91_set_B_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
+	at91_set_B_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
+	at91_set_B_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
+	at91_set_B_periph(AT91_PIN_PC20, 0);	/* LCDD18 */
+	at91_set_B_periph(AT91_PIN_PC21, 0);	/* LCDD19 */
+	at91_set_B_periph(AT91_PIN_PC22, 0);	/* LCDD20 */
+	at91_set_B_periph(AT91_PIN_PC23, 0);	/* LCDD21 */
+	at91_set_B_periph(AT91_PIN_PC24, 0);	/* LCDD22 */
+	at91_set_B_periph(AT91_PIN_PC25, 0);	/* LCDD23 */
+
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC);
+
+	gd->fb_base = 0;
+}
+#endif
+
+
+int board_init(void)
+{
+	/* Enable Ctrlc */
+	console_init_f();
+
+	/* arch number of AT91SAM9RLEK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK;
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	at91sam9rlek_serial_hw_init();
+#ifdef CONFIG_CMD_NAND
+	at91sam9rlek_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+	at91sam9rlek_spi_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	at91sam9rlek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+	return 0;
+}
diff --git a/board/atmel/at91sam9rlek/config.mk b/board/atmel/at91sam9rlek/config.mk
new file mode 100644
index 0000000..ff2cfd1
--- /dev/null
+++ b/board/atmel/at91sam9rlek/config.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0x23f00000
diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c
new file mode 100644
index 0000000..8a7d8e0
--- /dev/null
+++ b/board/atmel/at91sam9rlek/led.c
@@ -0,0 +1,77 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/io.h>
+
+#define	RED_LED		AT91_PIN_PD14	/* this is the power led */
+#define	GREEN_LED	AT91_PIN_PD15	/* this is the user1 led */
+#define	YELLOW_LED	AT91_PIN_PD16	/* this is the user2 led */
+
+void red_LED_on(void)
+{
+	at91_set_gpio_value(RED_LED, 1);
+}
+
+void red_LED_off(void)
+{
+	at91_set_gpio_value(RED_LED, 0);
+}
+
+void green_LED_on(void)
+{
+	at91_set_gpio_value(GREEN_LED, 0);
+}
+
+void green_LED_off(void)
+{
+	at91_set_gpio_value(GREEN_LED, 1);
+}
+
+void yellow_LED_on(void)
+{
+	at91_set_gpio_value(YELLOW_LED, 0);
+}
+
+void yellow_LED_off(void)
+{
+	at91_set_gpio_value(YELLOW_LED, 1);
+}
+
+void coloured_LED_init(void)
+{
+	/* Enable clock */
+	at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD);
+
+	at91_set_gpio_output(RED_LED, 1);
+	at91_set_gpio_output(GREEN_LED, 1);
+	at91_set_gpio_output(YELLOW_LED, 1);
+
+	at91_set_gpio_value(RED_LED, 0);
+	at91_set_gpio_value(GREEN_LED, 1);
+	at91_set_gpio_value(YELLOW_LED, 1);
+}
diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c
new file mode 100644
index 0000000..5af1a31
--- /dev/null
+++ b/board/atmel/at91sam9rlek/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
+
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+#define	MASK_ALE	(1 << 21)	/* our ALE is AD21 */
+#define	MASK_CLE	(1 << 22)	/* our CLE is AD22 */
+
+static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+	IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+	switch (cmd) {
+	case NAND_CTL_SETCLE:
+		IO_ADDR_W |= MASK_CLE;
+		break;
+	case NAND_CTL_SETALE:
+		IO_ADDR_W |= MASK_ALE;
+		break;
+	case NAND_CTL_CLRNCE:
+		at91_set_gpio_value(AT91_PIN_PB6, 1);
+		break;
+	case NAND_CTL_SETNCE:
+		at91_set_gpio_value(AT91_PIN_PB6, 0);
+		break;
+	}
+	this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
+{
+	return at91_get_gpio_value(AT91_PIN_PD17);
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+	nand->eccmode = NAND_ECC_SOFT;
+#ifdef CFG_NAND_DBW_16
+	nand->options = NAND_BUSWIDTH_16;
+#endif
+	nand->hwcontrol = at91sam9rlek_nand_hwcontrol;
+	nand->dev_ready = at91sam9rlek_nand_ready;
+	nand->chip_delay = 20;
+
+	return 0;
+}
diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c
new file mode 100644
index 0000000..eb1a724
--- /dev/null
+++ b/board/atmel/at91sam9rlek/partition.c
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+
+struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = {
+	{CFG_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
+};
+
+/*define the area offsets*/
+dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
+	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
+	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
+	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
+	{0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0,	"Kernel"},
+	{0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0,	"FS"},
+};
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 1ccbe2c..c649855 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -25,12 +25,12 @@
 #include <asm/sdram.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const struct sdram_info sdram = {
-	.phys_addr	= CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+	.data_bits	= SDRAM_DATA_16BIT,
 	.row_bits	= 13,
 	.col_bits	= 9,
 	.bank_bits	= 2,
@@ -47,8 +47,8 @@ static const struct sdram_info sdram = {
 
 int board_early_init_f(void)
 {
-	/* Set the SDRAM_ENABLE bit in the HEBI SFR */
-	hmatrix2_writel(SFR4, 1 << 1);
+	/* Enable SDRAM in the EBI mux */
+	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
 	gpio_enable_ebi();
 	gpio_enable_usart1();
@@ -66,7 +66,22 @@ int board_early_init_f(void)
 
 long int initdram(int board_type)
 {
-	return sdram_init(&sdram);
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %u of %u MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
 }
 
 void board_init_info(void)
diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds
index 34e347a..e736adf 100644
--- a/board/atmel/atngw100/u-boot.lds
+++ b/board/atmel/atngw100/u-boot.lds
@@ -29,17 +29,10 @@ SECTIONS
 	. = 0;
 	_text = .;
 	.text : {
+		*(.exception.text)
 		*(.text)
 		*(.text.*)
 	}
-
-	. = ALIGN(32);
-	__flashprog_start = .;
-	.flashprog : {
-		*(.flashprog)
-	}
-	. = ALIGN(32);
-	__flashprog_end = .;
 	_etext = .;
 
 	.rodata : {
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index 28f64c4..33bdba6 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -25,13 +25,39 @@
 #include <asm/sdram.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/hmatrix2.h>
+#include <asm/arch/hmatrix.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-static const struct sdram_info sdram = {
-	.phys_addr	= CFG_SDRAM_BASE,
+static const struct sdram_config sdram_config = {
+#if defined(CONFIG_ATSTK1006)
+	/* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */
+	.data_bits	= SDRAM_DATA_32BIT,
+	.row_bits	= 13,
+	.col_bits	= 9,
+	.bank_bits	= 2,
+	.cas		= 2,
+	.twr		= 2,
+	.trc		= 7,
+	.trp		= 2,
+	.trcd		= 2,
+	.tras		= 4,
+	.txsr		= 7,
+	/* 7.81 us */
+	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
+#else
+	/* MT48LC2M32B2P-5 (8 MB) on motherboard */
+#ifdef CONFIG_ATSTK1004
+	.data_bits	= SDRAM_DATA_16BIT,
+#else
+	.data_bits	= SDRAM_DATA_32BIT,
+#endif
+#ifdef CONFIG_ATSTK1000_16MB_SDRAM
+	/* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */
+	.row_bits	= 12,
+#else
 	.row_bits	= 11,
+#endif
 	.col_bits	= 8,
 	.bank_bits	= 2,
 	.cas		= 3,
@@ -43,12 +69,13 @@ static const struct sdram_info sdram = {
 	.txsr		= 5,
 	/* 15.6 us */
 	.refresh_period	= (156 * (SDRAMC_BUS_HZ / 1000)) / 10000,
+#endif
 };
 
 int board_early_init_f(void)
 {
-	/* Set the SDRAM_ENABLE bit in the HEBI SFR */
-	hmatrix2_writel(SFR4, 1 << 1);
+	/* Enable SDRAM in the EBI mux */
+	hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
 	gpio_enable_ebi();
 	gpio_enable_usart1();
@@ -65,7 +92,22 @@ int board_early_init_f(void)
 
 long int initdram(int board_type)
 {
-	return sdram_init(&sdram);
+	unsigned long expected_size;
+	unsigned long actual_size;
+	void *sdram_base;
+
+	sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+
+	expected_size = sdram_init(sdram_base, &sdram_config);
+	actual_size = get_ram_size(sdram_base, expected_size);
+
+	unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
+
+	if (expected_size != actual_size)
+		printf("Warning: Only %u of %u MiB SDRAM is working\n",
+				actual_size >> 20, expected_size >> 20);
+
+	return actual_size;
 }
 
 void board_init_info(void)
diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c
index 4047825..12537f3 100644
--- a/board/atmel/atstk1000/flash.c
+++ b/board/atmel/atstk1000/flash.c
@@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 flash_info_t flash_info[1];
 
-static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info)
+static void flash_identify(uint16_t *flash, flash_info_t *info)
 {
 	unsigned long flags;
 
@@ -76,7 +76,7 @@ void flash_print_info(flash_info_t *info)
 	       info->size >> 10, info->sector_count);
 }
 
-int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
+int flash_erase(flash_info_t *info, int s_first, int s_last)
 {
 	unsigned long flags;
 	unsigned long start_time;
@@ -154,7 +154,7 @@ int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last)
 	return ERR_OK;
 }
 
-int __flashprog write_buff(flash_info_t *info, uchar *src,
+int write_buff(flash_info_t *info, uchar *src,
 			   ulong addr, ulong count)
 {
 	unsigned long flags;
diff --git a/board/atmel/atstk1000/u-boot.lds b/board/atmel/atstk1000/u-boot.lds
index 247812e..0d3b19c 100644
--- a/board/atmel/atstk1000/u-boot.lds
+++ b/board/atmel/atstk1000/u-boot.lds
@@ -29,17 +29,10 @@ SECTIONS
 	. = 0;
 	_text = .;
 	.text : {
+		*(.exception.text)
 		*(.text)
 		*(.text.*)
 	}
-
-	. = ALIGN(32);
-	__flashprog_start = .;
-	.flashprog : {
-		*(.flashprog)
-	}
-	. = ALIGN(32);
-	__flashprog_end = .;
 	_etext = .;
 
 	.rodata : {
diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c
index a13eeeb..1be72a2 100644
--- a/board/dbau1x00/dbau1x00.c
+++ b/board/dbau1x00/dbau1x00.c
@@ -52,7 +52,7 @@ int checkboard (void)
 
 	*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
 
-	proc_id = read_32bit_cp0_register(CP0_PRID);
+	proc_id = read_c0_prid();
 
 	switch (proc_id >> 24) {
 	case 0:
diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 6c82596..e18e68e 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -257,25 +257,24 @@ void sdram_init(void)
 
 #define SPI_CS_MASK	0x80000000
 
-void spi_eeprom_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
 {
 	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
 
-	if (cs)
-		iopd->dat &= ~SPI_CS_MASK;
-	else
-		iopd->dat |=  SPI_CS_MASK;
+	iopd->dat &= ~SPI_CS_MASK;
 }
 
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
-	spi_eeprom_chipsel,
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
 
+	iopd->dat |=  SPI_CS_MASK;
+}
 #endif /* CONFIG_HARD_SPI */
 
 #if defined(CONFIG_OF_BOARD_SETUP)
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
index 6da80dc..9bc4d3f 100644
--- a/board/gth2/gth2.c
+++ b/board/gth2/gth2.c
@@ -135,7 +135,7 @@ int checkboard (void)
 
 	*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
 
-	proc_id = read_32bit_cp0_register(CP0_PRID);
+	proc_id = read_c0_prid();
 
 	switch (proc_id >> 24) {
 	case 0:
diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c
index 536c954..82b7235 100644
--- a/board/pb1x00/pb1x00.c
+++ b/board/pb1x00/pb1x00.c
@@ -51,7 +51,7 @@ int checkboard (void)
 
 	*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
 
-	proc_id = read_32bit_cp0_register(CP0_PRID);
+	proc_id = read_c0_prid();
 
 	switch (proc_id >> 24) {
 	case 0:
diff --git a/board/qemu-mips/qemu-mips.c b/board/qemu-mips/qemu-mips.c
index 6869074..6e6eab2 100644
--- a/board/qemu-mips/qemu-mips.c
+++ b/board/qemu-mips/qemu-mips.c
@@ -38,7 +38,7 @@ int checkboard(void)
 	u32 proc_id;
 	u32 config1;
 
-	proc_id = read_32bit_cp0_register(CP0_PRID);
+	proc_id = read_c0_prid();
 	printf("Board: Qemu -M mips CPU: ");
 	switch (proc_id) {
 	case 0x00018000:
@@ -51,7 +51,7 @@ int checkboard(void)
 		printf("4KEc");
 		break;
 	case 0x00019300:
-		config1 = read_mips32_cp0_config1();
+		config1 = read_c0_config1();
 		if (config1 & 1)
 			printf("24Kf");
 		else
@@ -64,7 +64,7 @@ int checkboard(void)
 		printf("R4000");
 		break;
 	case 0x00018100:
-		config1 = read_mips32_cp0_config1();
+		config1 = read_c0_config1();
 		if (config1 & 1)
 			printf("5Kf");
 		else
diff --git a/board/quad100hd/Makefile b/board/quad100hd/Makefile
new file mode 100644
index 0000000..252ad5a
--- /dev/null
+++ b/board/quad100hd/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o nand.o
+SOBJS   =
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/quad100hd/config.mk b/board/quad100hd/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/quad100hd/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
new file mode 100644
index 0000000..a36b89d
--- /dev/null
+++ b/board/quad100hd/nand.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#if defined(CONFIG_CMD_NAND)
+#include <asm/gpio.h>
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	switch(cmd) {
+	case NAND_CTL_SETCLE:
+		gpio_write_bit(CFG_NAND_CLE, 1);
+		break;
+	case NAND_CTL_CLRCLE:
+		gpio_write_bit(CFG_NAND_CLE, 0);
+		break;
+
+	case NAND_CTL_SETALE:
+		gpio_write_bit(CFG_NAND_ALE, 1);
+		break;
+	case NAND_CTL_CLRALE:
+		gpio_write_bit(CFG_NAND_ALE, 0);
+		break;
+
+	case NAND_CTL_SETNCE:
+		gpio_write_bit(CFG_NAND_CE, 0);
+		break;
+	case NAND_CTL_CLRNCE:
+		gpio_write_bit(CFG_NAND_CE, 1);
+		break;
+	}
+}
+
+static int quad100hd_nand_ready(struct mtd_info *mtd)
+{
+	return gpio_read_in_bit(CFG_NAND_RDY);
+}
+
+/*
+ * Main initialization routine
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+	/* Set address of hardware control function */
+	nand->hwcontrol = quad100hd_hwcontrol;
+	nand->dev_ready = quad100hd_nand_ready;
+	nand->eccmode = NAND_ECC_SOFT;
+	/* 15 us command delay time */
+	nand->chip_delay =  20;
+
+	/* Return happy */
+	return 0;
+}
+#endif /* CONFIG_CMD_NAND */
diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c
new file mode 100644
index 0000000..638bd6c
--- /dev/null
+++ b/board/quad100hd/quad100hd.c
@@ -0,0 +1,93 @@
+/*
+ * (C) Copyright 2008
+ * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
+ *
+ * Based in part on board/icecube/icecube.c from PPCBoot
+ * (C) Copyright 2003 Intrinsyc Software
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <environment.h>
+#include <logbuff.h>
+#include <post.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	/* taken from PPCBoot */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000000);
+	mtdcr(uicpr, 0xFFFF7FFE);	/* set int polarities */
+	mtdcr(uictr, 0x00000000);	/* set int trigger levels */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+
+	mtdcr(CPC0_SRR, 0x00040000);   /* Hold PCI bridge in reset */
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+#ifdef DISPLAY_BOARD_INFO
+	sys_info_t sysinfo;
+#endif
+
+	puts("Board: Quad100hd");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+#ifdef DISPLAY_BOARD_INFO
+	/* taken from ppcboot */
+	get_sys_info(&sysinfo);
+
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv *
+		1000000));
+	printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
+#endif
+
+	return 0;
+}
+
+long int initdram(int board_type)
+{
+	return CFG_SDRAM_SIZE;
+}
diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds
new file mode 100644
index 0000000..195d91b
--- /dev/null
+++ b/board/quad100hd/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index 25209e0..e85a0fc 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -842,37 +842,30 @@ void show_boot_progress (int status)
 #define SPI_ADC_CS_MASK	0x00000800
 #define SPI_DAC_CS_MASK	0x00001000
 
-void spi_adc_chipsel(int cs)
+static const u32 cs_mask[] = {
+    SPI_ADC_CS_MASK,
+    SPI_DAC_CS_MASK,
+};
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+    return bus == 0 && cs < sizeof(cs_mask) / sizeof(cs_mask[0]);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
 {
     volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
 
-    if(cs)
-	iopd->pdat &= ~SPI_ADC_CS_MASK;	/* activate the chip select */
-    else
-	iopd->pdat |=  SPI_ADC_CS_MASK;	/* deactivate the chip select */
+    iopd->pdat &= ~cs_mask[slave->cs];
 }
 
-void spi_dac_chipsel(int cs)
+void spi_cs_deactivate(struct spi_slave *slave)
 {
     volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */);
 
-    if(cs)
-	iopd->pdat &= ~SPI_DAC_CS_MASK;	/* activate the chip select */
-    else
-	iopd->pdat |=  SPI_DAC_CS_MASK;	/* deactivate the chip select */
+    iopd->pdat |= cs_mask[slave->cs];
 }
 
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects: it calls the appropriate function to control the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
-	spi_adc_chipsel,
-	spi_dac_chipsel
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
-
 #endif
 
 #endif /* CONFIG_MISC_INIT_R */
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c
index 2ec3a72..3ee8ba5 100644
--- a/board/ssv/adnpesc1/adnpesc1.c
+++ b/board/ssv/adnpesc1/adnpesc1.c
@@ -69,25 +69,24 @@ long int initdram (int board_type)
 
 #define	SPI_RTC_CS_MASK	0x00000001
 
-void spi_rtc_chipsel(int cs)
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
 {
 	nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
 
-	if (cs)
-		spi->slaveselect = SPI_RTC_CS_MASK;	/* activate (1) */
-	else
-		spi->slaveselect = 0;			/* deactivate (0) */
+	spi->slaveselect = SPI_RTC_CS_MASK;	/* activate (1) */
 }
 
-/*
- * The SPI command uses this table of functions for controlling the SPI
- * chip selects: it calls the appropriate function to control the SPI
- * chip selects.
- */
-spi_chipsel_type spi_chipsel[] = {
-	spi_rtc_chipsel
-};
-int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;
+
+	spi->slaveselect = 0;			/* deactivate (0) */
+}
 
 #endif