mpc8xx: remove IP860 board support

This board is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

6 files changed, 0 insertions, 925 deletions

diff --git a/board/ip860/Kconfig b/board/ip860/Kconfig
deleted file mode 100644
index 955c9db..0000000
--- a/board/ip860/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_IP860
-
-config SYS_BOARD
-	default "ip860"
-
-config SYS_CONFIG_NAME
-	default "IP860"
-
-endif
diff --git a/board/ip860/MAINTAINERS b/board/ip860/MAINTAINERS
deleted file mode 100644
index 36d5690..0000000
--- a/board/ip860/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-IP860 BOARD
-M:	Wolfgang Denk <wd@denx.de>
-S:	Maintained
-F:	board/ip860/
-F:	include/configs/IP860.h
-F:	configs/IP860_defconfig
diff --git a/board/ip860/Makefile b/board/ip860/Makefile
deleted file mode 100644
index 3c60006..0000000
--- a/board/ip860/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	= ip860.o flash.o
diff --git a/board/ip860/flash.c b/board/ip860/flash.c
deleted file mode 100644
index 542b0c8..0000000
--- a/board/ip860/flash.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef  CONFIG_ENV_SECT_SIZE
-#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	volatile immap_t	*immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t	*memctl = &immap->im_memctl;
-	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
-	unsigned long size;
-	int i;
-
-	/* Init: enable write,
-	 * or we cannot even write flash commands
-	 */
-	bcsr->bd_ctrl |= BD_CTRL_FLWE;
-
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size = flash_get_size((vu_long *)FLASH_BASE, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size<<20);
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-	memctl->memc_br1 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
-				(memctl->memc_br1 & ~(BR_BA_MSK));
-
-	/* Re-do sizing to get full correct info */
-	size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_info[0].size = size;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-	return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* all possible flash types
-	 * (28F016SV, 28F160S3, 28F320S3)
-	 * have the same erase block size: 64 kB per chip,
-	 * of 128 kB per bank
-	 */
-
-	/* set up sector start address table */
-	for (i = 0; i < info->sector_count; i++) {
-		info->start[i] = base;
-		base += 0x00020000;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_INTEL:	printf ("Intel ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_28F016SV:	printf ("28F016SV (16 Mbit, 32 x 64k)\n");
-				break;
-	case FLASH_28F160S3:	printf ("28F160S3 (16 Mbit, 32 x 512K)\n");
-				break;
-	case FLASH_28F320S3:	printf ("28F320S3 (32 Mbit, 64 x 512K)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write "Intelligent Identifier" command: read Manufacturer ID */
-	*addr = 0x90909090;
-
-	value = addr[0];
-	switch (value) {
-	case (MT_MANUFACT & 0x00FF00FF):	/* MT or => Intel */
-	case (INTEL_ALT_MANU & 0x00FF00FF):
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	switch (value) {
-	case (INTEL_ID_28F016S):
-		info->flash_id += FLASH_28F016SV;
-		info->sector_count = 32;
-		info->size = 0x00400000;
-		break;				/* => 2x2 MB		*/
-
-	case (INTEL_ID_28F160S3):
-		info->flash_id += FLASH_28F160S3;
-		info->sector_count = 32;
-		info->size = 0x00400000;
-		break;				/* => 2x2 MB		*/
-
-	case (INTEL_ID_28F320S3):
-		info->flash_id += FLASH_28F320S3;
-		info->sector_count = 64;
-		info->size = 0x00800000;
-		break;				/* => 2x4 MB		*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	for (i = 0; i < info->sector_count; i++) {
-		info->start[i] = base + (i * 0x00020000);
-		/* don't know how to check sector protection */
-		info->protect[i] = 0;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (vu_long *)info->start[0];
-
-		*addr = 0xFFFFFF;	/* reset bank to read array mode */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	int flag, prot, sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	start = get_timer (0);
-	last  = start;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			vu_long *addr = (vu_long *)(info->start[sect]);
-
-			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
-
-			/* Single Block Erase Command */
-			*addr = 0x20202020;
-			/* Confirm */
-			*addr = 0xD0D0D0D0;
-			/* Resume Command, as per errata update */
-			*addr = 0xD0D0D0D0;
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			/* wait at least 80us - let's wait 1 ms */
-			udelay (1000);
-
-			while ((*addr & 0x00800080) != 0x00800080) {
-				if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					*addr = 0xFFFFFFFF;	/* reset bank */
-					return 1;
-				}
-				/* show that we're waiting */
-				if ((now - last) > 1000) {	/* every second */
-					putc ('.');
-					last = now;
-				}
-			}
-
-			/* reset to read mode */
-			*addr = 0xFFFFFFFF;
-		}
-	}
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)dest;
-	ulong start, csr;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*addr & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Write Command */
-	*addr = 0x10101010;
-
-	/* Write Data */
-	*addr = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	flag  = 0;
-	while (((csr = *addr) & 0x00800080) != 0x00800080) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			flag = 1;
-			break;
-		}
-	}
-	if (csr & 0x00400040) {
-printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr);
-		flag = 1;
-	}
-
-	/* Clear Status Registers Command */
-	*addr = 0x50505050;
-	/* Reset to read array mode */
-	*addr = 0xFFFFFFFF;
-
-	return (flag);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/ip860/ip860.c b/board/ip860/ip860.c
deleted file mode 100644
index 4e3b1b5..0000000
--- a/board/ip860/ip860.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-unsigned long ip860_get_dram_size(void);
-unsigned long ip860_get_clk_freq (void);
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
-	0x1ff77c47,					/* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0x1ff77c34, 0xefeabc34, 0x1fb57c35,	/* last */
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
-	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-	0xf0affc00, 0xe1bbbc04, 0x1ff77c47,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc84, 0xfffffc07,		/* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x7ffffc07,					/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-
-/* ------------------------------------------------------------------------- */
-int board_early_init_f(void)
-{
-    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-    volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-/* init BCSR chipselect line for ip860_get_clk_freq() and ip860_get_dram_size() */
-    memctl->memc_or4 = CONFIG_SYS_OR4;
-    memctl->memc_br4 = CONFIG_SYS_BR4;
-
-    return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- *
- * Test ID string (IP860...)
- */
-
-int checkboard (void)
-{
-	unsigned char *s, *e;
-	unsigned char buf[64];
-	int i;
-
-	puts ("Board: ");
-
-	i = getenv_f("serial#", (char *)buf, sizeof (buf));
-	s = (i > 0) ? buf : NULL;
-
-	if (!s || strncmp ((char *)s, "IP860", 5)) {
-		puts ("### No HW ID - assuming IP860");
-	} else {
-		for (e = s; *e; ++e) {
-			if (*e == ' ')
-				break;
-		}
-
-		for (; s < e; ++s) {
-			putc (*s);
-		}
-	}
-
-	putc ('\n');
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size;
-	ulong refresh_val;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-			   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Preliminary prescaler for refresh
-	 */
-	if (ip860_get_clk_freq() == 50000000)
-	{
-		memctl->memc_mptpr = 0x0400;
-		refresh_val = 0xC3000000;
-	}
-	else
-	{
-		memctl->memc_mptpr = 0x0200;
-		refresh_val = 0x9C000000;
-	}
-
-
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller banks 2 to the SDRAM address
-	 */
-	memctl->memc_or2 = CONFIG_SYS_OR2;
-	memctl->memc_br2 = CONFIG_SYS_BR2;
-
-	/* IP860 boards have only one bank SDRAM */
-
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mamr = 0x00804114 | refresh_val;
-	memctl->memc_mcr  = 0x80004105;	/* run precharge pattern from loc 5 */
-	udelay(1);
-	memctl->memc_mamr = 0x00804118 | refresh_val;
-	memctl->memc_mcr  = 0x80004130;	/* run refresh pattern 8 times */
-
-
-	udelay (1000);
-
-	/*
-	 * Check SDRAM Memory Size
-	 */
-	if (ip860_get_dram_size() == 16)
-		size = dram_size (refresh_val | 0x00804114, SDRAM_BASE, SDRAM_MAX_SIZE);
-	else
-		size = dram_size (refresh_val | 0x00906114, SDRAM_BASE, SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-	memctl->memc_or2 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
-	memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
-	udelay (10000);
-
-	/*
-	 * Also, map other memory to correct position
-	 */
-
-#if (defined(CONFIG_SYS_OR1) && defined(CONFIG_SYS_BR1_PRELIM))
-	memctl->memc_or1 = CONFIG_SYS_OR1;
-	memctl->memc_br1 = CONFIG_SYS_BR1;
-#endif
-
-#if defined(CONFIG_SYS_OR3) && defined(CONFIG_SYS_BR3)
-	memctl->memc_or3 = CONFIG_SYS_OR3;
-	memctl->memc_br3 = CONFIG_SYS_BR3;
-#endif
-
-#if defined(CONFIG_SYS_OR4) && defined(CONFIG_SYS_BR4)
-	memctl->memc_or4 = CONFIG_SYS_OR4;
-	memctl->memc_br4 = CONFIG_SYS_BR4;
-#endif
-
-#if defined(CONFIG_SYS_OR5) && defined(CONFIG_SYS_BR5)
-	memctl->memc_or5 = CONFIG_SYS_OR5;
-	memctl->memc_br5 = CONFIG_SYS_BR5;
-#endif
-
-#if defined(CONFIG_SYS_OR6) && defined(CONFIG_SYS_BR6)
-	memctl->memc_or6 = CONFIG_SYS_OR6;
-	memctl->memc_br6 = CONFIG_SYS_BR6;
-#endif
-
-#if defined(CONFIG_SYS_OR7) && defined(CONFIG_SYS_BR7)
-	memctl->memc_or7 = CONFIG_SYS_OR7;
-	memctl->memc_br7 = CONFIG_SYS_BR7;
-#endif
-
-	return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-						   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size(base, maxsize));
-}
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phy (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	ulong mask = PB_ENET_RESET | PB_ENET_JABD;
-	ulong reg;
-
-	/* Make sure PHY is not in low-power mode */
-	immr->im_cpm.cp_pbpar &= ~(mask);	/* GPIO */
-	immr->im_cpm.cp_pbodr &= ~(mask);	/* active output */
-
-	/* Set  JABD low  (no JABber Disable),
-	 * and RESET high (Reset PHY)
-	 */
-	reg = immr->im_cpm.cp_pbdat;
-	reg = (reg & ~PB_ENET_JABD) | PB_ENET_RESET;
-	immr->im_cpm.cp_pbdat = reg;
-
-	/* now drive outputs */
-	immr->im_cpm.cp_pbdir |= mask;	/* output */
-	udelay (1000);
-	/*
-	   * Release RESET signal
-	 */
-	immr->im_cpm.cp_pbdat &= ~(PB_ENET_RESET);
-	udelay (1000);
-}
-
-/* ------------------------------------------------------------------------- */
-
-unsigned long ip860_get_clk_freq(void)
-{
-	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
-	ulong temp;
-	uchar sysclk;
-
-	if ((bcsr->bd_status & 0x80) == 0x80)	/* bd_rev valid ? */
-		sysclk = (bcsr->bd_rev & 0x18) >> 3;
-	else
-		sysclk = 0x00;
-
-	switch (sysclk)
-	{
-		case 0x00:
-			temp = 50000000;
-			break;
-
-		case 0x01:
-			temp = 80000000;
-			break;
-
-		default:
-			temp = 50000000;
-			break;
-	}
-
-	return (temp);
-
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-unsigned long ip860_get_dram_size(void)
-{
-	volatile ip860_bcsr_t	*bcsr   = (ip860_bcsr_t *)BCSR_BASE;
-	ulong temp;
-	uchar dram_size;
-
-	if ((bcsr->bd_status & 0x80) == 0x80)	/* bd_rev valid ? */
-		dram_size = (bcsr->bd_rev & 0xE0) >> 5;
-	else
-		dram_size = 0x00;	/* default is 16 MB */
-
-	switch (dram_size)
-	{
-		case 0x00:
-			temp = 16;
-			break;
-
-		case 0x01:
-			temp = 32;
-			break;
-
-		default:
-			temp = 16;
-			break;
-	}
-
-	return (temp);
-
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug
deleted file mode 100644
index e561bb4..0000000
--- a/board/ip860/u-boot.lds.debug
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    arch/powerpc/lib/ppcstring.o	(.text)
-    arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
-    arch/powerpc/lib/time.o		(.text)
-    arch/powerpc/lib/ticks.o		(.text)
-/**
-    . = env_offset;
-    common/env_embedded.o(.text)
-**/
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-
-  . = ALIGN(4);
-  .u_boot_list : {
-	KEEP(*(SORT(.u_boot_list*)));
-  }
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end = . ;
-  PROVIDE (end = .);
-}