Initial revision

6 files changed, 2014 insertions, 0 deletions

diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c
new file mode 100644
index 0000000..4d2100b
--- /dev/null
+++ b/board/RPXClassic/RPXClassic.c
@@ -0,0 +1,290 @@
+/*
+ * (C)	Copyright 2001
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT  p.aubert@staubli.com
+ * U-Boot port on RPXClassic LF (CLLF_BW31) board
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <config.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+static unsigned char aschex_to_byte (unsigned char *cp);
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_	0xFFFFCC25
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 00h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08,
+	0x3FBFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Burst Read. (Offset 08h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88,
+	0x3FBFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Single Write. (Offset 18h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00,
+	0x3FFFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Burst Write. (Offset 20h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C,
+	0x0CFFCC00, 0x33FFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Refresh. (Offset 30h in UPMA RAM)
+	 */
+	0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24,
+	0x3FFFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Exception. (Offset 3Ch in UPMA RAM)
+	 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: RPXClassic\n");
+	return (0);
+}
+
+/*-----------------------------------------------------------------------------
+ * board_get_enetaddr -- Read the MAC Address in the I2C EEPROM
+ *-----------------------------------------------------------------------------
+ */
+void board_get_enetaddr (uchar * enet)
+{
+	int i;
+	char buff[256], *cp;
+
+	/* Initialize I2C					*/
+	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+	/* Read 256 bytes in EEPROM				*/
+	i2c_read (0x54, 0, 1, buff, 128);
+	i2c_read (0x54, 128, 1, buff + 128, 128);
+
+	/* Retrieve MAC address in buffer (key EA)		*/
+	for (cp = buff;;) {
+		if (cp[0] == 'E' && cp[1] == 'A') {
+			cp += 3;
+			/* Read MAC address			*/
+			for (i = 0; i < 6; i++, cp += 2) {
+				enet[i] = aschex_to_byte (cp);
+			}
+		}
+		/* Scan to the end of the record		*/
+		while ((*cp != '\n') && (*cp != 0xff)) {
+			cp++;
+		}
+		/* If the next character is a \n, 0 or ff, we are done.	*/
+		cp++;
+		if ((*cp == '\n') || (*cp == 0) || (*cp == 0xff))
+			break;
+	}
+
+#ifdef CONFIG_FEC_ENET
+	/* The MAC address is the same as normal ethernet except the 3rd byte	 */
+	/* (See the E.P. Planet Core Overview manual		*/
+	enet[3] |= 0x80;
+
+	/* Validate the fast ethernet tranceiver		*/
+	*((volatile uchar *) BCSR2) &= ~BCSR2_MIICTL;
+	*((volatile uchar *) BCSR2) &= ~BCSR2_MIIPWRDWN;
+	*((volatile uchar *) BCSR2) |= BCSR2_MIIRST;
+	*((volatile uchar *) BCSR2) |= BCSR2_MIIPWRDWN;
+#endif
+
+	printf ("MAC address = %02x:%02x:%02x:%02x:%02x:%02x\n",
+		enet[0], enet[1], enet[2], enet[3], enet[4], enet[5]);
+
+}
+
+void rpxclassic_init (void)
+{
+	/* Enable NVRAM */
+	*((uchar *) BCSR0) |= BCSR0_ENNVRAM;
+
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size10;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/* Refresh clock prescalar */
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	memctl->memc_mar = 0x00000000;
+
+	/* Map controller banks 1 to the SDRAM bank */
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
+
+	memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE));	/* no refresh yet */
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr = 0x80002230;	/* SDRAM bank 0 - refresh twice */
+	udelay (1);
+
+	memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+
+	udelay (1000);
+
+	/* Check Bank 0 Memory Size
+	 * try 10 column mode
+	 */
+
+	size10 = dram_size (CFG_MAMR_10COL, (ulong *) SDRAM_BASE_PRELIM,
+						SDRAM_MAX_SIZE);
+
+	return (size10);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];			/* to make test non-destructive */
+	unsigned char i = 0;
+
+	memctl->memc_mamr = mamr_value;
+
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;	/* pointer arith! */
+
+		save[i++] = *addr;
+		*addr = ~cnt;
+	}
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
+}
+static unsigned char aschex_to_byte (unsigned char *cp)
+{
+	u_char byte, c;
+
+	c = *cp++;
+
+	if ((c >= 'A') && (c <= 'F')) {
+		c -= 'A';
+		c += 10;
+	} else if ((c >= 'a') && (c <= 'f')) {
+		c -= 'a';
+		c += 10;
+	} else {
+		c -= '0';
+	}
+
+	byte = c * 16;
+
+	c = *cp;
+
+	if ((c >= 'A') && (c <= 'F')) {
+		c -= 'A';
+		c += 10;
+	} else if ((c >= 'a') && (c <= 'f')) {
+		c -= 'a';
+		c += 10;
+	} else {
+		c -= '0';
+	}
+
+	byte += c;
+
+	return (byte);
+}
diff --git a/board/RPXClassic/config.mk b/board/RPXClassic/config.mk
new file mode 100644
index 0000000..ae455e1
--- /dev/null
+++ b/board/RPXClassic/config.mk
@@ -0,0 +1,29 @@
+#
+# (C)  Copyright 2001
+# Stäubli Faverges - <www.staubli.com>
+# Pierre AUBERT  p.aubert@staubli.com
+# U-Boot port on RPXClassic LF (CLLF_BW31) board
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xff000000
diff --git a/board/RPXClassic/flash.c b/board/RPXClassic/flash.c
new file mode 100644
index 0000000..6293497
--- /dev/null
+++ b/board/RPXClassic/flash.c
@@ -0,0 +1,447 @@
+/*
+ * (C)  Copyright 2001
+ * Stäubli Faverges - <www.staubli.com>
+ * Pierre AUBERT  p.aubert@staubli.com
+ * U-Boot port on RPXClassic LF (CLLF_BW31) board
+ *
+ * RPXClassic uses Am29DL323B flash memory with 2 banks
+ *
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0 ;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+
+        flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+		      &flash_info[0]);
+#endif
+
+	flash_info[0].size = size_b0;
+
+	return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id & FLASH_BTYPE) {
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00008000;
+		info->start[2] = base + 0x00010000;
+		info->start[3] = base + 0x00018000;
+		info->start[4] = base + 0x00020000;
+		info->start[5] = base + 0x00028000;
+		info->start[6] = base + 0x00030000;
+		info->start[7] = base + 0x00038000;
+		for (i = 8; i < info->sector_count; i++) {
+			info->start[i] = base + ((i-7) * 0x00040000) ;
+		}
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+        case FLASH_AMDL323B:
+            printf ("AMDL323DB (16 Mbytes, bottom boot sect)\n");
+            break;
+	default:
+            printf ("Unknown Chip Type\n");
+            break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+
+        /* Reset flash componeny                                             */
+        addr [0] = 0xf0f0f0f0;
+
+        /* Write auto select command: read Manufacturer ID */
+        addr[0xAAA] = 0xAAAAAAAA ;
+	addr[0x555] = 0x55555555 ;
+	addr[0xAAA] = 0x90909090 ;
+
+	value = addr[0] ;
+
+	switch (value & 0x00FF00FF) {
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[2] ;		/* device ID		*/
+
+	switch (value & 0x00FF00FF) {
+        case (AMD_ID_DL323B & 0x00FF00FF):
+            info->flash_id += FLASH_AMDL323B;
+            info->sector_count = 71;
+            info->size = 0x01000000;            /* 16 Mb                     */
+
+            break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+
+	}
+	/* set up sector start address table */
+        /* set sector offsets for bottom boot block type	*/
+        info->start[0] = base + 0x00000000;
+        info->start[1] = base + 0x00008000;
+        info->start[2] = base + 0x00010000;
+        info->start[3] = base + 0x00018000;
+        info->start[4] = base + 0x00020000;
+        info->start[5] = base + 0x00028000;
+        info->start[6] = base + 0x00030000;
+        info->start[7] = base + 0x00038000;
+        for (i = 8; i < info->sector_count; i++) {
+            info->start[i] = base + ((i-7) * 0x00040000) ;
+        }
+
+	/* check for protected sectors */
+        for (i = 0; i < 23; i++) {
+            /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+            /* D0 = 1 if protected */
+            addr = (volatile unsigned long *)(info->start[i]);
+            info->protect[i] = addr[4] & 1 ;
+	}
+        /* Check for protected sectors in the 2nd bank                       */
+        addr[0x100AAA] = 0xAAAAAAAA ;
+        addr[0x100555] = 0x55555555 ;
+        addr[0x100AAA] = 0x90909090 ;
+
+        for (i = 23; i < info->sector_count; i++) {
+            /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+            /* D0 = 1 if protected */
+            addr = (volatile unsigned long *)(info->start[i]);
+            info->protect[i] = addr[4] & 1 ;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (volatile unsigned long *)info->start[0];
+
+		*addr = 0xF0F0F0F0;	/* reset bank 1                      */
+		addr = (volatile unsigned long *)info->start[23];
+
+		*addr = 0xF0F0F0F0;	/* reset bank 2                      */
+
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	vu_long *addr = (vu_long*)(info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+	    (info->flash_id > FLASH_AMD_COMP)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+	addr[0xAAA] = 0x80808080;
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (vu_long *)(info->start[sect]) ;
+			addr[0] = 0x30303030 ;
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (vu_long *)(info->start[l_sect]);
+	while ((addr[0] & 0x80808080) != 0x80808080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+DONE:
+	/* reset to read mode */
+	addr = (vu_long *)info->start[0];
+	addr[0] = 0xF0F0F0F0;	/* reset bank */
+
+	printf (" done\n");
+        return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long *)(info->start[0]);
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0xAAA] = 0xAAAAAAAA;
+	addr[0x555] = 0x55555555;
+	addr[0xAAA] = 0xA0A0A0A0;
+
+	*((vu_long *)dest) = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c
new file mode 100644
index 0000000..a33357b
--- /dev/null
+++ b/board/RPXlite/RPXlite.c
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
+ * U-Boot port on RPXlite board
+ *
+ * DRAM related UPMA register values are modified.
+ * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFCC25
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 00h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08,
+	0x3FBFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Burst Read. (Offset 08h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88,
+	0x3FBFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Single Write. (Offset 18h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00,
+	0x3FFFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Burst Write. (Offset 20h in UPMA RAM)
+	 */
+	0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C,
+	0x0CFFCC00, 0x33FFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Refresh. (Offset 30h in UPMA RAM)
+	 */
+	0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24,
+	0x3FFFCC27, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+	/*
+	 * Exception. (Offset 3Ch in UPMA RAM)
+	 */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	puts ("Board: RPXlite\n") ;
+	return (0) ;
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    long int size10 ;
+
+    upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+	/* Refresh clock prescalar */
+    memctl->memc_mptpr = CFG_MPTPR ;
+
+    memctl->memc_mar  = 0x00000000;
+
+	/* Map controller banks 1 to the SDRAM bank */
+    memctl->memc_or1 = CFG_OR1_PRELIM;
+    memctl->memc_br1 = CFG_BR1_PRELIM;
+
+    memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */
+
+    udelay(200);
+
+    /* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr  = 0x80002230 ; /* SDRAM bank 0 - refresh twice */
+    udelay(1);
+
+    memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+    udelay (1000);
+
+	/* Check Bank 0 Memory Size
+	 * try 10 column mode
+	 */
+
+	size10 = dram_size (CFG_MAMR_10COL, (ulong *)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE) ;
+
+    return (size10);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    volatile long int	 *addr;
+    ulong		  cnt, val;
+    ulong		  save[32];	/* to make test non-destructive */
+    unsigned char	  i = 0;
+
+    memctl->memc_mamr = mamr_value;
+
+    for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	save[i++] = *addr;
+	*addr = ~cnt;
+    }
+
+    /* write 0 to base address */
+    addr = base;
+    save[i] = *addr;
+    *addr = 0;
+
+    /* check at base address */
+    if ((val = *addr) != 0) {
+	*addr = save[i];
+	return (0);
+    }
+
+    for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	val = *addr;
+	*addr = save[--i];
+
+	if (val != (~cnt)) {
+	    return (cnt * sizeof(long));
+	}
+    }
+    return (maxsize);
+}
diff --git a/board/iphase4539/flash.c b/board/iphase4539/flash.c
new file mode 100644
index 0000000..401ffbe
--- /dev/null
+++ b/board/iphase4539/flash.c
@@ -0,0 +1,490 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Adapted for Interphase 4539 by Wolfgang Grandegger <wg@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <flash.h>
+#include <asm/io.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS];
+
+extern int hwc_flash_size(void);
+static ulong flash_get_size (u32 addr, flash_info_t *info);
+static int flash_get_offsets (u32 base, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_reset (u32 addr);
+
+#define out8(a,v) *(volatile unsigned char*)(a) = v
+#define in8(a)	  *(volatile unsigned char*)(a)
+#define in32(a)	  *(volatile unsigned long*)(a)
+#define iobarrier_rw() eieio()
+
+unsigned long flash_init (void)
+{
+	unsigned int i;
+	unsigned long flash_size = 0;
+	unsigned long bank_size;
+	unsigned int bank = 0;
+
+	/* Init: no FLASHes known */
+	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = 0;
+		flash_info[i].size = 0;
+	}
+
+	/* Initialise the BOOT Flash */
+	if (bank == CFG_MAX_FLASH_BANKS) {
+		puts ("Warning: not all Flashes are initialised !");
+		return flash_size;
+	}
+
+	bank_size = flash_get_size (CFG_FLASH_BASE, flash_info + bank);
+	if (bank_size) {
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE && \
+    CFG_MONITOR_BASE < CFG_FLASH_BASE + CFG_MAX_FLASH_SIZE
+		/* monitor protection ON by default */
+		flash_protect(FLAG_PROTECT_SET,
+			      CFG_MONITOR_BASE,
+			      CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+			      flash_info + bank);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+		/* ENV protection ON by default */
+		flash_protect(FLAG_PROTECT_SET,
+			      CFG_ENV_ADDR,
+			      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+			      flash_info + bank);
+#endif
+
+		/* HWC protection ON by default */
+		flash_protect(FLAG_PROTECT_SET,
+			      CFG_FLASH_BASE,
+			      CFG_FLASH_BASE + 0x10000 - 1,
+			      flash_info + bank);
+
+		flash_size += bank_size;
+		bank++;
+	} else {
+		puts ("Warning: the BOOT Flash is not initialised !");
+	}
+
+	return flash_size;
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (u32 addr, flash_info_t *info)
+{
+	volatile uchar value;
+#if 0
+	int i;
+#endif
+
+	/* Write auto select command: read Manufacturer ID */
+	out8(addr + 0x0555, 0xAA);
+	iobarrier_rw();
+	udelay(10);
+	out8(addr + 0x02AA, 0x55);
+	iobarrier_rw();
+	udelay(10);
+	out8(addr + 0x0555, 0x90);
+	iobarrier_rw();
+	udelay(10);
+
+	value = in8(addr);
+	iobarrier_rw();
+	udelay(10);
+	switch (value | (value << 16)) {
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		flash_reset (addr);
+		return 0;
+	}
+
+	value = in8(addr + 1);			/* device ID		*/
+	iobarrier_rw();
+
+	switch (value) {
+	case AMD_ID_LV033C:
+		info->flash_id += FLASH_AM033C;
+		info->size = hwc_flash_size();
+		if (info->size > CFG_MAX_FLASH_SIZE) {
+			printf("U-Boot supports only %d MB\n",
+			       CFG_MAX_FLASH_SIZE);
+			info->size = CFG_MAX_FLASH_SIZE;
+		}
+		info->sector_count = info->size / 0x10000;
+		break;				/* => 4 MB		*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		flash_reset (addr);
+		return (0);			/* => no or unknown flash */
+
+	}
+
+	if (!flash_get_offsets (addr, info)) {
+		flash_reset (addr);
+		return 0;
+	}
+
+#if 0
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		value = in8(info->start[i] + 2);
+		iobarrier_rw();
+		info->protect[i] = (value & 1) != 0;
+	}
+#endif
+
+	/*
+	 * Reset bank to read mode
+	 */
+	flash_reset (addr);
+
+	return (info->size);
+}
+
+static int flash_get_offsets (u32 base, flash_info_t *info)
+{
+	unsigned int i, size;
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM033C:
+		/* set sector offsets for uniform sector type	*/
+		size = info->size / info->sector_count;
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base + i * size;
+		}
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile u32 addr = info->start[0];
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+	if (s_first < 0 || s_first > s_last) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN ||
+	    info->flash_id > FLASH_AMD_COMP) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	out8(addr + 0x555, 0xAA);
+	iobarrier_rw();
+	out8(addr + 0x2AA, 0x55);
+	iobarrier_rw();
+	out8(addr + 0x555, 0x80);
+	iobarrier_rw();
+	out8(addr + 0x555, 0xAA);
+	iobarrier_rw();
+	out8(addr + 0x2AA, 0x55);
+	iobarrier_rw();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = info->start[sect];
+			out8(addr, 0x30);
+			iobarrier_rw();
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = info->start[l_sect];
+	while ((in8(addr) & 0x80) != 0x80) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+		iobarrier_rw();
+	}
+
+DONE:
+	/* reset to read mode */
+	flash_reset (info->start[0]);
+
+	printf (" done\n");
+	return 0;
+}
+
+/*
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	volatile u32 addr = info->start[0];
+	ulong start;
+	int flag, i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((in32(dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* first, perform an unlock bypass command to speed up flash writes */
+	out8(addr + 0x555, 0xAA);
+	iobarrier_rw();
+	out8(addr + 0x2AA, 0x55);
+	iobarrier_rw();
+	out8(addr + 0x555, 0x20);
+	iobarrier_rw();
+
+	/* write each byte out */
+	for (i = 0; i < 4; i++) {
+		char *data_ch = (char *)&data;
+		out8(addr, 0xA0);
+		iobarrier_rw();
+		out8(dest+i, data_ch[i]);
+		iobarrier_rw();
+		udelay(10); /* XXX */
+	}
+
+	/* we're done, now do an unlock bypass reset */
+	out8(addr, 0x90);
+	iobarrier_rw();
+	out8(addr, 0x00);
+	iobarrier_rw();
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((in32(dest) & 0x80808080) != (data & 0x80808080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+		iobarrier_rw();
+	}
+
+	flash_reset (addr);
+
+	return (0);
+}
+
+/*
+ * Reset bank to read mode
+ */
+static void flash_reset (u32 addr)
+{
+	out8(addr, 0xF0);	/* reset bank */
+	iobarrier_rw();
+}
+
+void flash_print_info (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM033C:	printf ("AM29LV033C (32 Mbit, uniform sectors)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	if (info->size % 0x100000 == 0) {
+		printf ("  Size: %ld MB in %d Sectors\n",
+			info->size / 0x100000, info->sector_count);
+	}
+	else if (info->size % 0x400 == 0) {
+		printf ("  Size: %ld KB in %d Sectors\n",
+			info->size / 0x400, info->sector_count);
+	}
+	else {
+		printf ("  Size: %ld B in %d Sectors\n",
+			info->size, info->sector_count);
+	}
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+}
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
new file mode 100644
index 0000000..c65e809
--- /dev/null
+++ b/board/sixnet/sixnet.c
@@ -0,0 +1,563 @@
+/*
+ * (C) Copyright 2001, 2002
+ * Dave Ellis, SIXNET, dge@sixnetio.com.
+ *  Based on code by:
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * and other contributors to U-Boot. See file CREDITS for list
+ * of people who contributed to this  project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+#include <net.h>	/* for eth_init() */
+#include <rtc.h>
+#include "sixnet.h"
+
+#define ORMASK(size) ((-size) & OR_AM_MSK)
+
+static long ram_size(ulong *, long);
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ * returns 0 if recognized, -1 if unknown
+ */
+
+int checkboard (void)
+{
+	puts ("Board: SIXNET SXNI855T\n");
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#error "SXNI855T has no PCMCIA port"
+#endif	/* CFG_CMD_PCMCIA */
+
+/* ------------------------------------------------------------------------- */
+
+#define _not_used_ 0xffffffff
+
+/* UPMB table for dual UART. */
+
+/* this table is for 50MHz operation, it should work at all lower speeds */
+const uint duart_table[] =
+{
+	/* single read. (offset 0 in upm RAM) */
+	0xfffffc04, 0x0ffffc04, 0x0ff3fc04, 0x0ff3fc04,
+	0x0ff3fc00, 0x0ff3fc04, 0xfffffc04, 0xfffffc05,
+
+	/* burst read. (offset 8 in upm RAM) */
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* single write. (offset 18 in upm RAM) */
+	0xfffffc04, 0x0ffffc04, 0x00fffc04, 0x00fffc04,
+	0x00fffc04, 0x00fffc00, 0xfffffc04, 0xfffffc05,
+
+	/* burst write. (offset 20 in upm RAM) */
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* refresh. (offset 30 in upm RAM) */
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* exception. (offset 3c in upm RAM) */
+	_not_used_, _not_used_, _not_used_, _not_used_,
+};
+
+/* Load FPGA very early in boot sequence, since it must be
+ * loaded before the 16C2550 serial channels can be used as
+ * console channels.
+ *
+ * Note: Much of the configuration is not complete. The
+ *       stack is in DPRAM since SDRAM has not been initialized,
+ *       so the stack must be kept small. Global variables
+ *       are still in FLASH, so they cannot be written.
+ *	 Only the FLASH, DPRAM, immap and FPGA can be addressed,
+ *       the other chip selects may not have been initialized.
+ *       The clocks have been initialized, so udelay() can be
+ *       used.
+ */
+#define FPGA_DONE	0x0080	/* PA8, input, high when FPGA load complete */
+#define FPGA_PROGRAM_L	0x0040	/* PA9, output, low to reset, high to start */
+#define FPGA_INIT_L	0x0020	/* PA10, input, low indicates not ready	*/
+#define fpga (*(volatile unsigned char *)(CFG_FPGA_PROG))	/* FPGA port */
+
+int board_postclk_init (void)
+{
+
+	/* the data to load to the XCSxxXL FPGA */
+	static const unsigned char fpgadata[] = {
+# include "fpgadata.c"
+	};
+
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+#define porta (immap->im_ioport.iop_padat)
+	const unsigned char* pdata;
+
+	/* /INITFPGA and DONEFPGA signals are inputs */
+	immap->im_ioport.iop_padir &= ~(FPGA_INIT_L | FPGA_DONE);
+
+	/* Force output pin to begin at 0, /PROGRAM asserted (0) resets FPGA */
+	porta &= ~FPGA_PROGRAM_L;
+
+	/* Set FPGA as an output */
+	immap->im_ioport.iop_padir |= FPGA_PROGRAM_L;
+
+	/* delay a little to make sure FPGA sees it, really
+	 * only need less than a microsecond.
+	 */
+	udelay(10);
+
+	/* unassert /PROGRAM */
+	porta |= FPGA_PROGRAM_L;
+
+	/* delay while FPGA does last erase, indicated by
+	 * /INITFPGA going high. This should happen within a
+	 * few milliseconds.
+	 */
+	/* ### FIXME - a timeout check would be good, maybe flash
+	 * the status LED to indicate the error?
+	 */
+	while ((porta & FPGA_INIT_L) == 0)
+		; /* waiting */
+
+	/* write program data to FPGA at the programming address
+	 * so extra /CS1 strobes at end of configuration don't actually
+         * write to any registers.
+	 */
+	fpga = 0xff;		/* first write is ignored	*/
+	fpga = 0xff;		/* fill byte			*/
+	fpga = 0xff;		/* fill byte			*/
+	fpga = 0x4f;		/* preamble code		*/
+	fpga = 0x80; fpga = 0xaf; fpga = 0x9b; /* length (ignored) */
+	fpga = 0x4b;		/* field check code */
+
+	pdata = fpgadata;
+	/* while no error write out each of the 28 byte frames */
+	while ((porta & (FPGA_INIT_L | FPGA_DONE)) == FPGA_INIT_L
+	       && pdata < fpgadata + sizeof(fpgadata)) {
+
+		fpga = 0x4f;	/* preamble code */
+
+		/* 21 bytes of data in a frame */
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++); fpga = *(pdata++);
+		fpga = *(pdata++);
+
+		fpga = 0x4b;	/* field check code		*/
+		fpga = 0xff;	/* extended write cycle		*/
+		fpga = 0x4b;	/* extended write cycle
+				 * (actually 0x4b from bitgen.exe)
+				 */
+		fpga = 0xff;	/* extended write cycle		*/
+		fpga = 0xff;	/* extended write cycle		*/
+		fpga = 0xff;	/* extended write cycle		*/
+	}
+
+	fpga = 0xff;		/* startup byte			*/
+	fpga = 0xff;		/* startup byte			*/
+	fpga = 0xff;		/* startup byte			*/
+	fpga = 0xff;		/* startup byte			*/
+
+#if 0 /* ### FIXME */
+	/* If didn't load all the data or FPGA_DONE is low the load failed.
+	 * Maybe someday stop here and flash the status LED? The console
+	 * is not configured, so can't print an error message. Can't write
+	 * global variables to set a flag (except gd?).
+	 * For now it must work.
+	 */
+#endif
+
+	/* Now that the FPGA is loaded, set up the Dual UART chip
+	 * selects. Must be done here since it may be used as the console.
+	 */
+	upmconfig(UPMB, (uint *)duart_table, sizeof(duart_table)/sizeof(uint));
+
+	memctl->memc_mbmr = DUART_MBMR;
+	memctl->memc_or5 = DUART_OR_VALUE;
+	memctl->memc_br5 = DUART_BR5_VALUE;
+	memctl->memc_or6 = DUART_OR_VALUE;
+	memctl->memc_br6 = DUART_BR6_VALUE;
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* base address for SRAM, assume 32-bit port,  valid */
+#define NVRAM_BR_VALUE   (CFG_SRAM_BASE | BR_PS_32 | BR_V)
+
+/*  up to 64MB - will be adjusted for actual size */
+#define NVRAM_OR_PRELIM  (ORMASK(CFG_SRAM_SIZE) \
+	| OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_EHTR)
+/*
+ * Miscellaneous platform dependent initializations after running in RAM.
+ */
+
+int misc_init_r (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	bd_t *bd = gd->bd;
+
+	memctl->memc_or2 = NVRAM_OR_PRELIM;
+	memctl->memc_br2 = NVRAM_BR_VALUE;
+
+	/* Is there any SRAM? Is it 16 or 32 bits wide? */
+
+	/* First look for 32-bit SRAM */
+	bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE);
+
+	if (bd->bi_sramsize == 0) {
+	    /* no 32-bit SRAM, but there could be 16-bit SRAM since
+	     * it would report size 0 when configured for 32-bit bus.
+	     * Try again with a 16-bit bus.
+	     */
+	    memctl->memc_br2 |= BR_PS_16;
+	    bd->bi_sramsize = ram_size((ulong*)CFG_SRAM_BASE, CFG_SRAM_SIZE);
+	}
+
+	if (bd->bi_sramsize == 0) {
+	    memctl->memc_br2 = 0;	/* disable select since nothing there */
+	}
+	else {
+	    /* adjust or2 for actual size of SRAM */
+	    memctl->memc_or2 |= ORMASK(bd->bi_sramsize);
+	    bd->bi_sramstart = CFG_SRAM_BASE;
+	    printf("SRAM:  %lu KB\n", bd->bi_sramsize >> 10);
+	}
+
+
+	/* set standard MPC8xx clock so kernel will see the time
+	 * even if it doesn't have a DS1306 clock driver.
+	 * This helps with experimenting with standard kernels.
+	 */
+	{
+	    ulong tim;
+	    struct rtc_time tmp;
+
+	    rtc_get(&tmp);	/* get time from DS1306 RTC */
+
+	    /* convert to seconds since 1970 */
+	    tim = mktime(tmp.tm_year, tmp.tm_mon, tmp.tm_mday,
+			 tmp.tm_hour, tmp.tm_min, tmp.tm_sec);
+
+	    immap->im_sitk.sitk_rtck = KAPWR_KEY;
+	    immap->im_sit.sit_rtc = tim;
+	}
+
+#if 0
+	/* The code below is no longer valid since the prototype of
+	 * eth_init() and eth_halt() have been changed to support
+	 * multi-ethernet feature in U-Boot; the eth_initialize()
+	 * routine should be called before any access to the ethernet
+	 * callbacks.
+	 */
+
+	/* FIXME - for now init ethernet to force PHY special mode */
+	eth_init(bd);
+	eth_halt();
+#endif
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'.
+ *
+ * The memory size MUST be a power of 2 for this to work.
+ *
+ * The only memory modified is 4 bytes at offset 0. This is important
+ * since for the SRAM this location is reserved for autosizing, so if
+ * it is modified and the board is reset before ram_size() completes
+ * no damage is  done. Normally even the memory at 0 is preserved. The
+ * higher SRAM addresses may contain battery backed RAM disk data which
+ * must never be corrupted.
+ */
+
+static long ram_size(ulong *base, long maxsize)
+{
+    volatile long	*test_addr;
+    volatile long	*base_addr = base;
+    volatile long	*flash = (volatile long*)CFG_FLASH_BASE;
+    ulong		ofs;		/* byte offset from base_addr */
+    ulong		save;		/* to make test non-destructive */
+    ulong		junk;
+    long		ramsize = -1;	/* size not determined yet */
+
+    save = *base_addr;		/* save value at 0 so can restore */
+
+    /* is any SRAM present? */
+    *base_addr = 0x5555aaaa;
+
+    /* use flash read to modify data bus, since with no SRAM present
+     * the data bus may retain the value if our code is running
+     * completely in the cache.
+     */
+    junk = *flash;
+
+    if (*base_addr != 0x5555aaaa)
+	ramsize = 0;		/* no RAM present, or defective */
+    else {
+	*base_addr = 0xaaaa5555;
+	junk = *flash;		/* use flash read to modify data bus */
+	if (*base_addr != 0xaaaa5555)
+	    ramsize = 0;	/* no RAM present, or defective */
+    }
+
+    /* now size it if any is present */
+    for (ofs = 4; ofs < maxsize && ramsize < 0; ofs <<= 1) {
+	test_addr = (long*)((long)base_addr + ofs);	/* location to test */
+
+	*base_addr = ~*test_addr;
+	if (*base_addr == *test_addr)
+	    ramsize = ofs;	/* wrapped back to 0, so this is the size */
+    }
+
+    *base_addr = save;		/* restore value at 0 */
+    return (ramsize);
+}
+
+/* ------------------------------------------------------------------------- */
+/* sdram table based on the FADS manual                                      */
+/* for chip MB811171622A-100                                                 */
+
+/* this table is for 50MHz operation, it should work at all lower speeds */
+
+const uint sdram_table[] =
+{
+	/* single read. (offset 0 in upm RAM) */
+	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
+	0x1ff77c47,
+
+	/* precharge and Mode Register Set initialization (offset 5).
+	 * This is also entered at offset 6 to do Mode Register Set
+	 * without the precharge.
+	 */
+	0x1ff77c34, 0xefeabc34, 0x1fb57c35,
+
+	/* burst read. (offset 8 in upm RAM) */
+	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
+	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* single write. (offset 18 in upm RAM) */
+        /* FADS had 0x1f27fc04, ...
+	 * but most other boards have 0x1f07fc04, which
+	 * sets GPL0 from A11MPC to 0 1/4 clock earlier,
+	 * like the single read.
+	 * This seems better so I am going with the change.
+	 */
+	0x1f07fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* burst write. (offset 20 in upm RAM) */
+	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+	0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* refresh. (offset 30 in upm RAM) */
+	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+	0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
+	_not_used_, _not_used_, _not_used_, _not_used_,
+
+	/* exception. (offset 3c in upm RAM) */
+	0x7ffffc07, _not_used_, _not_used_, _not_used_ };
+
+/* ------------------------------------------------------------------------- */
+
+#define	SDRAM_MAX_SIZE		0x10000000	/* max 256 MB SDRAM */
+
+/* precharge and set Mode Register */
+#define SDRAM_MCR_PRE    (MCR_OP_RUN | MCR_UPM_A |	/* select UPM     */ \
+			  MCR_MB_CS3 |			/* chip select    */ \
+			  MCR_MLCF(1) | MCR_MAD(5))	/* 1 time at 0x05 */
+
+/* set Mode Register, no precharge */
+#define SDRAM_MCR_MRS    (MCR_OP_RUN | MCR_UPM_A |	/* select UPM     */ \
+			  MCR_MB_CS3 |			/* chip select    */ \
+			  MCR_MLCF(1) | MCR_MAD(6))	/* 1 time at 0x06 */
+
+/* runs refresh loop twice so get 8 refresh cycles */
+#define SDRAM_MCR_REFR   (MCR_OP_RUN | MCR_UPM_A |	/* select UPM     */ \
+			  MCR_MB_CS3 |			/* chip select    */ \
+			  MCR_MLCF(2) | MCR_MAD(0x30))	/* twice at 0x30  */
+
+/* MAMR values work in either mamr or mbmr */
+/* 8 column SDRAM */
+#define SDRAM_MAMR_8COL  /* refresh at 50MHz */				  \
+			 ((195 << MAMR_PTA_SHIFT) | MAMR_PTAE		  \
+			 | MAMR_AMA_TYPE_0	/* Address MUX 0 */	  \
+			 | MAMR_DSA_1_CYCL	/* 1 cycle disable */	  \
+			 | MAMR_G0CLA_A11	/* GPL0 A11[MPC] */	  \
+			 | MAMR_RLFA_1X		/* Read loop 1 time */	  \
+			 | MAMR_WLFA_1X		/* Write loop 1 time */	  \
+			 | MAMR_TLFA_4X)	/* Timer loop 4 times */
+
+/* 9 column SDRAM */
+#define SDRAM_MAMR_9COL ((SDRAM_MAMR_8COL & (~MAMR_G0CLA_A11)) | MAMR_G0CLA_A10)
+
+/* base address 0, 32-bit port, SDRAM UPM, valid */
+#define SDRAM_BR_VALUE   (BR_PS_32 | BR_MS_UPMA | BR_V)
+
+/*  up to 256MB, SAM, G5LS - will be adjusted for actual size */
+#define SDRAM_OR_PRELIM  (ORMASK(SDRAM_MAX_SIZE) | OR_CSNT_SAM | OR_G5LS)
+
+/* This is the Mode Select Register value for the SDRAM.
+ * Burst length: 4
+ * Burst Type: sequential
+ * CAS Latency: 2
+ * Write Burst Length: burst
+ */
+#define SDRAM_MODE   0x22	/* CAS latency 2, burst length 4 */
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram(int board_type)
+{
+	volatile immap_t     *immap = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	uint size_sdram = 0;
+	uint size_sdram9 = 0;
+	uint base = 0;		/* SDRAM must start at 0 */
+	int i;
+
+	upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+	/* Configure the refresh (mostly).  This needs to be
+	 * based upon processor clock speed and optimized to provide
+	 * the highest level of performance.
+	 *
+	 * Preliminary prescaler for refresh.
+	 * This value is selected for four cycles in 31.2 us,
+	 * which gives 8192 cycles in 64 milliseconds.
+	 * This may be too fast, but works for any memory.
+	 * It is adjusted to 4096 cycles in 64 milliseconds if
+	 * possible once we know what memory we have.
+         *
+	 * We have to be careful changing UPM registers after we
+	 * ask it to run these commands.
+	 *
+	 * PTA - periodic timer period for our design is
+	 *       50 MHz x 31.2us
+	 *       ---------------  = 195
+	 *       1 x 8 x 1
+	 *
+	 *    50MHz clock
+	 *    31.2us refresh interval
+	 *    SCCR[DFBRG] 0
+	 *    PTP divide by 8
+	 *    1 chip select
+         */
+	memctl->memc_mptpr = MPTPR_PTP_DIV8;	/* 0x0800 */
+	memctl->memc_mamr = SDRAM_MAMR_8COL & (~MAMR_PTAE); /* no refresh yet */
+
+	/* The SDRAM Mode Register value is shifted left 2 bits since
+	 * A30 and A31 don't connect to the SDRAM for 32-bit wide memory.
+	 */
+	memctl->memc_mar = SDRAM_MODE << 2;	/* MRS code */
+	udelay(200);		/* SDRAM needs 200uS before set it up */
+
+	/* Now run the precharge/nop/mrs commands. */
+	memctl->memc_mcr = SDRAM_MCR_PRE;
+	udelay(2);
+
+	/* Run 8 refresh cycles (2 sets of 4) */
+	memctl->memc_mcr = SDRAM_MCR_REFR;	/* run refresh twice */
+	udelay(2);
+
+	/* some brands want Mode Register set after the refresh
+	 * cycles. This shouldn't hurt anything for the brands
+	 * that were happy with the first time we set it.
+	 */
+	memctl->memc_mcr = SDRAM_MCR_MRS;
+	udelay(2);
+
+	memctl->memc_mamr = SDRAM_MAMR_8COL;	/* enable refresh */
+	memctl->memc_or3 = SDRAM_OR_PRELIM;
+	memctl->memc_br3 = SDRAM_BR_VALUE + base;
+
+	/* Some brands need at least 10 DRAM accesses to stabilize.
+	 * It wont hurt the brands that don't.
+	 */
+	for (i=0; i<10; ++i) {
+		volatile ulong *addr = (volatile ulong *)base;
+		ulong val;
+
+		val = *(addr + i);
+		*(addr + i) = val;
+	}
+
+	/* Check SDRAM memory Size in 8 column mode.
+	 * For a 9 column memory we will get half the actual size.
+	 */
+	size_sdram = ram_size((ulong *)0, SDRAM_MAX_SIZE);
+
+	/* Check SDRAM memory Size in 9 column mode.
+	 * For an 8 column memory we will see at most 4 megabytes.
+	 */
+	memctl->memc_mamr = SDRAM_MAMR_9COL;
+	size_sdram9 = ram_size((ulong *)0, SDRAM_MAX_SIZE);
+
+	if (size_sdram < size_sdram9)	/* leave configuration at 9 columns */
+		size_sdram = size_sdram9;
+	else				/* go back to 8 columns */
+		memctl->memc_mamr = SDRAM_MAMR_8COL;
+
+	/* adjust or3 for actual size of SDRAM
+	 */
+	memctl->memc_or3 |= ORMASK(size_sdram);
+
+	/* Adjust refresh rate depending on SDRAM type.
+	 * For types > 128 MBit (32 Mbyte for 2 x16 devices) leave
+	 * it at the current (fast) rate.
+	 * For 16, 64 and 128 MBit half the rate will do.
+	 */
+	if (size_sdram <= 32 * 1024 * 1024)
+		memctl->memc_mptpr = MPTPR_PTP_DIV16;	/* 0x0400 */
+
+	return (size_sdram);
+}
+