summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorPeng Fan <Peng.Fan@freescale.com>2015-04-28 10:24:48 +0800
committerPeng Fan <Peng.Fan@freescale.com>2015-04-29 14:54:10 +0800
commit2ad4679a8c3be12bc20fcac9a83752e3bad7f9b6 (patch)
tree077f538233d043be504d57d23ee6d421e254753a /board
parent523c285e9fa9b25cfeaa05e7360da1e071560667 (diff)
downloadu-boot-imx-2ad4679a8c3be12bc20fcac9a83752e3bad7f9b6.zip
u-boot-imx-2ad4679a8c3be12bc20fcac9a83752e3bad7f9b6.tar.gz
u-boot-imx-2ad4679a8c3be12bc20fcac9a83752e3bad7f9b6.tar.bz2
MLK-10774-16 imx:mx6sxsabresd update board and config
Update mx6sxsabresd board and config file Note: Fastboot Android support is not added. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/mx6sxsabresd/mx6sxsabresd.c510
1 files changed, 461 insertions, 49 deletions
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 2ff960e..67e334b 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -13,6 +13,7 @@
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
+#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/io.h>
#include <asm/imx-common/mxc_i2c.h>
@@ -29,6 +30,16 @@
#include <usb.h>
#include <usb/ehci-fsl.h>
+#ifdef CONFIG_MXC_RDC
+#include <asm/imx-common/rdc-sema.h>
+#include <asm/arch/imx-rdc.h>
+#endif
+
+#ifdef CONFIG_VIDEO_MXS
+#include <linux/fb.h>
+#include <mxsfb.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
@@ -59,6 +70,15 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE)
+#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
+ PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
+
+#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_40ohm)
+
+#define WDOG_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm)
+
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_SIZE;
@@ -109,6 +129,34 @@ static iomux_v3_cfg_t const usdhc4_pads[] = {
MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
+static iomux_v3_cfg_t const usdhc4_emmc_pads[] = {
+ MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA4__USDHC4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA5__USDHC4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA6__USDHC4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DATA7__USDHC4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_RESET_B__USDHC4_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const wdog_b_pad = {
+ MX6_PAD_GPIO1_IO13__GPIO1_IO_13 | MUX_PAD_CTRL(WDOG_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const peri_3v3_pads[] = {
+ MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+#ifdef CONFIG_FEC_MXC
static iomux_v3_cfg_t const fec1_pads[] = {
MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
@@ -126,8 +174,21 @@ static iomux_v3_cfg_t const fec1_pads[] = {
MX6_PAD_RGMII1_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
-static iomux_v3_cfg_t const peri_3v3_pads[] = {
- MX6_PAD_QSPI1A_DATA0__GPIO4_IO_16 | MUX_PAD_CTRL(NO_PAD_CTRL),
+static iomux_v3_cfg_t const fec2_pads[] = {
+ MX6_PAD_ENET1_MDC__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET1_MDIO__ENET2_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII2_RX_CTL__ENET2_RX_EN | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII2_RD0__ENET2_RX_DATA_0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII2_RD1__ENET2_RX_DATA_1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII2_RD2__ENET2_RX_DATA_2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII2_RD3__ENET2_RX_DATA_3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII2_RXC__ENET2_RX_CLK | MUX_PAD_CTRL(ENET_RX_PAD_CTRL),
+ MX6_PAD_RGMII2_TX_CTL__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII2_TD0__ENET2_TX_DATA_0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII2_TD1__ENET2_TX_DATA_1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII2_TD2__ENET2_TX_DATA_2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII2_TD3__ENET2_TX_DATA_3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII2_TXC__ENET2_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
static iomux_v3_cfg_t const phy_control_pads[] = {
@@ -141,19 +202,19 @@ static iomux_v3_cfg_t const phy_control_pads[] = {
MX6_PAD_ENET2_CRS__GPIO2_IO_7 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
-static void setup_iomux_uart(void)
+static int setup_fec(int fec_id)
{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-static int setup_fec(void)
-{
- struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+ struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
+ = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR;
int reg;
- /* Use 125MHz anatop loopback REF_CLK1 for ENET1 */
- clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 0);
+ if (0 == fec_id)
+ /* Use 125M anatop loopback REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/
+ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], IOMUX_GPR1_FEC1_MASK, 0);
+ else
+ /* Use 125M anatop loopback REF_CLK1 for ENET2, clear gpr1[14], gpr1[18]*/
+ clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], IOMUX_GPR1_FEC2_MASK, 0);
imx_iomux_v3_setup_multiple_pads(phy_control_pads,
ARRAY_SIZE(phy_control_pads));
@@ -170,17 +231,195 @@ static int setup_fec(void)
reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
writel(reg, &anatop->pll_enet);
- return enable_fec_anatop_clock(ENET_125MHZ);
+ return enable_fec_anatop_clock(fec_id, ENET_125MHZ);
}
int board_eth_init(bd_t *bis)
{
- imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
- setup_fec();
+ if (0 == CONFIG_FEC_ENET_DEV)
+ imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
+ else
+ imx_iomux_v3_setup_multiple_pads(fec2_pads, ARRAY_SIZE(fec2_pads));
+
+ setup_fec(CONFIG_FEC_ENET_DEV);
return cpu_eth_init(bis);
}
+int board_phy_config(struct phy_device *phydev)
+{
+ /*
+ * Enable 1.8V(SEL_1P5_1P8_POS_REG) on
+ * Phy control debug reg 0
+ */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
+
+ /* rgmii tx clock delay enable */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_VIDEO_MXS
+static iomux_v3_cfg_t const lvds_ctrl_pads[] = {
+ /* CABC enable */
+ MX6_PAD_QSPI1A_DATA2__GPIO4_IO_18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+ /* Use GPIO for Brightness adjustment, duty cycle = period */
+ MX6_PAD_SD1_DATA1__GPIO6_IO_3 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const lcd_pads[] = {
+ MX6_PAD_LCD1_CLK__LCDIF1_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_ENABLE__LCDIF1_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_HSYNC__LCDIF1_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_VSYNC__LCDIF1_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA00__LCDIF1_DATA_0 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA01__LCDIF1_DATA_1 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA02__LCDIF1_DATA_2 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA03__LCDIF1_DATA_3 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA04__LCDIF1_DATA_4 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA05__LCDIF1_DATA_5 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA06__LCDIF1_DATA_6 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA07__LCDIF1_DATA_7 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA08__LCDIF1_DATA_8 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA09__LCDIF1_DATA_9 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA10__LCDIF1_DATA_10 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA11__LCDIF1_DATA_11 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA12__LCDIF1_DATA_12 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA13__LCDIF1_DATA_13 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA14__LCDIF1_DATA_14 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA15__LCDIF1_DATA_15 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA16__LCDIF1_DATA_16 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA17__LCDIF1_DATA_17 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA18__LCDIF1_DATA_18 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA19__LCDIF1_DATA_19 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA20__LCDIF1_DATA_20 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA21__LCDIF1_DATA_21 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA22__LCDIF1_DATA_22 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_DATA23__LCDIF1_DATA_23 | MUX_PAD_CTRL(LCD_PAD_CTRL),
+ MX6_PAD_LCD1_RESET__GPIO3_IO_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+
+ /* Use GPIO for Brightness adjustment, duty cycle = period */
+ MX6_PAD_SD1_DATA2__GPIO6_IO_4 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+
+struct lcd_panel_info_t {
+ unsigned int lcdif_base_addr;
+ int depth;
+ void (*enable)(struct lcd_panel_info_t const *dev);
+ struct fb_videomode mode;
+};
+
+void do_enable_lvds(struct lcd_panel_info_t const *dev)
+{
+ enable_lcdif_clock(dev->lcdif_base_addr);
+ enable_lvds(dev->lcdif_base_addr);
+
+ imx_iomux_v3_setup_multiple_pads(lvds_ctrl_pads,
+ ARRAY_SIZE(lvds_ctrl_pads));
+
+ /* Enable CABC */
+ gpio_direction_output(IMX_GPIO_NR(4, 18) , 1);
+
+ /* Set Brightness to high */
+ gpio_direction_output(IMX_GPIO_NR(6, 3) , 1);
+}
+
+void do_enable_parallel_lcd(struct lcd_panel_info_t const *dev)
+{
+ enable_lcdif_clock(dev->lcdif_base_addr);
+
+ imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
+
+ /* Power up the LCD */
+ gpio_direction_output(IMX_GPIO_NR(3, 27) , 1);
+
+ /* Set Brightness to high */
+ gpio_direction_output(IMX_GPIO_NR(6, 4) , 1);
+}
+
+static struct lcd_panel_info_t const displays[] = {{
+ .lcdif_base_addr = LCDIF2_BASE_ADDR,
+ .depth = 18,
+ .enable = do_enable_lvds,
+ .mode = {
+ .name = "Hannstar-XGA",
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .lcdif_base_addr = LCDIF1_BASE_ADDR,
+ .depth = 24,
+ .enable = do_enable_parallel_lcd,
+ .mode = {
+ .name = "MCIMX28LCD",
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 29850,
+ .left_margin = 89,
+ .right_margin = 164,
+ .upper_margin = 23,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+
+int board_video_skip(void)
+{
+ int i;
+ int ret;
+ char const *panel = getenv("panel");
+ if (!panel) {
+ panel = displays[0].mode.name;
+ printf("No panel detected: default to %s\n", panel);
+ i = 0;
+ } else {
+ for (i = 0; i < ARRAY_SIZE(displays); i++) {
+ if (!strcmp(panel, displays[i].mode.name))
+ break;
+ }
+ }
+ if (i < ARRAY_SIZE(displays)) {
+ ret = mxs_lcd_panel_setup(displays[i].mode, displays[i].depth,
+ displays[i].lcdif_base_addr);
+ if (!ret) {
+ if (displays[i].enable)
+ displays[i].enable(displays+i);
+ printf("Display: %s (%ux%u)\n",
+ displays[i].mode.name,
+ displays[i].mode.xres,
+ displays[i].mode.yres);
+ } else
+ printf("LCD %s cannot be configured: %d\n",
+ displays[i].mode.name, ret);
+ } else {
+ printf("unsupported panel %s\n", panel);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_I2C_MXC
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
/* I2C1 for PMIC */
static struct i2c_pads_info i2c_pad_info1 = {
@@ -196,28 +435,100 @@ static struct i2c_pads_info i2c_pad_info1 = {
},
};
+/* I2C2 */
+struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO1_IO02__I2C2_SCL | PC,
+ .gpio_mode = MX6_PAD_GPIO1_IO02__GPIO1_IO_2 | PC,
+ .gp = IMX_GPIO_NR(1, 2),
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_GPIO1_IO03__I2C2_SDA | PC,
+ .gpio_mode = MX6_PAD_GPIO1_IO03__GPIO1_IO_3 | PC,
+ .gp = IMX_GPIO_NR(1, 3),
+ },
+};
+
+static struct pmic *pfuze;
int power_init_board(void)
{
- struct pmic *p;
unsigned int reg, ret;
- p = pfuze_common_init(I2C_PMIC);
- if (!p)
+ pfuze = pfuze_common_init(I2C_PMIC);
+ if (!pfuze)
return -ENODEV;
- ret = pfuze_mode_init(p, APS_PFM);
+ ret = pfuze_mode_init(pfuze, APS_PFM);
if (ret < 0)
return ret;
/* Enable power of VGEN5 3V3, needed for SD3 */
- pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
+ pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, &reg);
reg &= ~LDO_VOL_MASK;
reg |= (LDOB_3_30V | (1 << LDO_EN));
- pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+ pmic_reg_write(pfuze, PFUZE100_VGEN5VOL, reg);
return 0;
}
+#ifdef CONFIG_LDO_BYPASS_CHECK
+void ldo_mode_set(int ldo_bypass)
+{
+ unsigned int value;
+ int is_400M;
+ u32 vddarm;
+ struct pmic *p = pfuze;
+
+ if (!p) {
+ printf("No PMIC found!\n");
+ return;
+ }
+
+ /* switch to ldo_bypass mode */
+ if (ldo_bypass) {
+ prep_anatop_bypass();
+ /* decrease VDDARM to 1.275V */
+ pmic_reg_read(p, PFUZE100_SW1ABVOL, &value);
+ value &= ~0x3f;
+ value |= PFUZE100_SW1ABC_SETP(12750);
+ pmic_reg_write(p, PFUZE100_SW1ABVOL, value);
+
+ /* decrease VDDSOC to 1.3V */
+ pmic_reg_read(p, PFUZE100_SW1CVOL, &value);
+ value &= ~0x3f;
+ value |= PFUZE100_SW1ABC_SETP(13000);
+ pmic_reg_write(p, PFUZE100_SW1CVOL, value);
+
+ is_400M = set_anatop_bypass(1);
+ if (is_400M)
+ vddarm = PFUZE100_SW1ABC_SETP(10750);
+ else
+ vddarm = PFUZE100_SW1ABC_SETP(11750);
+
+ pmic_reg_read(p, PFUZE100_SW1ABVOL, &value);
+ value &= ~0x3f;
+ value |= vddarm;
+ pmic_reg_write(p, PFUZE100_SW1ABVOL, value);
+
+ pmic_reg_read(p, PFUZE100_SW1CVOL, &value);
+ value &= ~0x3f;
+ value |= PFUZE100_SW1ABC_SETP(11750);
+ pmic_reg_write(p, PFUZE100_SW1CVOL, value);
+
+ finish_anatop_bypass();
+ printf("switch to ldo_bypass mode!\n");
+ }
+
+}
+#endif
+#endif
+
+#ifdef CONFIG_MXC_RDC
+static rdc_peri_cfg_t const shared_resources[] = {
+ (RDC_PER_GPIO1 | RDC_DOMAIN(0) | RDC_DOMAIN(1)),
+};
+#endif
+
#ifdef CONFIG_USB_EHCI_MX6
#define USB_OTHERREGS_OFFSET 0x800
#define UCTRL_PWR_POL (1 << 9)
@@ -261,53 +572,64 @@ int board_ehci_hcd_init(int port)
}
#endif
-int board_phy_config(struct phy_device *phydev)
-{
- /*
- * Enable 1.8V(SEL_1P5_1P8_POS_REG) on
- * Phy control debug reg 0
- */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);
-
- /* rgmii tx clock delay enable */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
-
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-
int board_early_init_f(void)
{
- setup_iomux_uart();
-
- /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */
- imx_iomux_v3_setup_multiple_pads(peri_3v3_pads,
- ARRAY_SIZE(peri_3v3_pads));
-
- /* Active high for ncp692 */
- gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
+#ifdef CONFIG_MXC_RDC
+ imx_rdc_setup_peripherals(shared_resources, ARRAY_SIZE(shared_resources));
+#endif
-#ifdef CONFIG_USB_EHCI_MX6
- setup_usb();
+#ifdef CONFIG_SYS_AUXCORE_FASTUP
+ arch_auxiliary_core_up(0, CONFIG_SYS_AUXCORE_BOOTDATA);
#endif
+ setup_iomux_uart();
+
return 0;
}
static struct fsl_esdhc_cfg usdhc_cfg[3] = {
{USDHC2_BASE_ADDR, 0, 4},
{USDHC3_BASE_ADDR},
+#ifdef CONFIG_MX6SXSABRESD_EMMC_REWORK
+ {USDHC4_BASE_ADDR, 0, 8},
+#else
{USDHC4_BASE_ADDR},
+#endif
};
#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10)
#define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11)
#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21)
+int mmc_get_env_devno(void)
+{
+ u32 soc_sbmr = readl(SRC_BASE_ADDR + 0x4);
+ int dev_no;
+ u32 bootsel;
+
+ bootsel = (soc_sbmr & 0x000000FF) >> 6 ;
+
+ /* If not boot from sd/mmc, use default value */
+ if (bootsel != 1)
+ return CONFIG_SYS_MMC_ENV_DEV;
+
+ /* BOOT_CFG2[3] and BOOT_CFG2[4] */
+ dev_no = (soc_sbmr & 0x00001800) >> 11;
+
+ /* need ubstract 1 to map to the mmc device id
+ * see the comments in board_mmc_init function
+ */
+
+ dev_no--;
+
+ return dev_no;
+}
+
+int mmc_map_to_kernel_blk(int dev_no)
+{
+ return dev_no + 1;
+}
+
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
@@ -321,7 +643,11 @@ int board_mmc_getcd(struct mmc *mmc)
ret = !gpio_get_value(USDHC3_CD_GPIO);
break;
case USDHC4_BASE_ADDR:
+#ifdef CONFIG_MX6SXSABRESD_EMMC_REWORK
+ ret = 1;
+#else
ret = !gpio_get_value(USDHC4_CD_GPIO);
+#endif
break;
}
@@ -355,9 +681,14 @@ int board_mmc_init(bd_t *bis)
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
break;
case 2:
+#ifdef CONFIG_MX6SXSABRESD_EMMC_REWORK
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_emmc_pads, ARRAY_SIZE(usdhc4_emmc_pads));
+#else
imx_iomux_v3_setup_multiple_pads(
usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
gpio_direction_input(USDHC4_CD_GPIO);
+#endif
usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
break;
default:
@@ -417,6 +748,38 @@ int board_mmc_init(bd_t *bis)
#endif
}
+int check_mmc_autodetect(void)
+{
+ char *autodetect_str = getenv("mmcautodetect");
+
+ if ((autodetect_str != NULL) &&
+ (strcmp(autodetect_str, "yes") == 0)) {
+ return 1;
+ }
+
+ return 0;
+}
+
+void board_late_mmc_init(void)
+{
+ char cmd[32];
+ char mmcblk[32];
+ u32 dev_no = mmc_get_env_devno();
+
+ if (!check_mmc_autodetect())
+ return;
+
+ setenv_ulong("mmcdev", dev_no);
+
+ /* Set mmcblk env */
+ sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw",
+ mmc_map_to_kernel_blk(dev_no));
+ setenv("mmcroot", mmcblk);
+
+ sprintf(cmd, "mmc dev %d", dev_no);
+ run_command(cmd, 0);
+}
+
#ifdef CONFIG_FSL_QSPI
#define QSPI_PAD_CTRL1 \
@@ -453,13 +816,44 @@ int board_qspi_init(void)
}
#endif
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"sd3", MAKE_CFGVAL(0x42, 0x30, 0x00, 0x00)},
+ {"sd4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+ {"qspi2", MAKE_CFGVAL(0x18, 0x00, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
int board_init(void)
{
/* Address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ /*
+ * Because kernel set WDOG_B mux before pad with the commone pinctrl
+ * framwork now and wdog reset will be triggered once set WDOG_B mux
+ * with default pad setting, we set pad setting here to workaround this.
+ * Since imx_iomux_v3_setup_pad also set mux before pad setting, we set
+ * as GPIO mux firstly here to workaround it.
+ */
+ imx_iomux_v3_setup_pad(wdog_b_pad);
+
+ /* Enable PERI_3V3, which is used by SD2, ENET, LVDS, BT */
+ imx_iomux_v3_setup_multiple_pads(peri_3v3_pads,
+ ARRAY_SIZE(peri_3v3_pads));
+
+ /* Active high for ncp692 */
+ gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
+
#ifdef CONFIG_SYS_I2C_MXC
setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+ setup_usb();
#endif
#ifdef CONFIG_FSL_QSPI
@@ -469,6 +863,24 @@ int board_init(void)
return 0;
}
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ add_board_boot_modes(board_boot_modes);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_MMC
+ board_late_mmc_init();
+#endif
+
+ return 0;
+}
+
+u32 get_board_rev(void)
+{
+ return get_cpu_rev();
+}
+
int checkboard(void)
{
puts("Board: MX6SX SABRE SDB\n");