* Patches by Udi Finkelstein, 2 June 2003:

  - Added support for custom keyboards, initialized by defining a
    board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
  - Added support for the RBC823 board.
  - cpu/mpc8xx/lcd.c now automatically calculates the
    Horizontal Pixel Count field.

* Fix alignment problem in BOOTP (dhcp_leasetime option)
  [pointed out by Nicolas Lacressonnière, 2 Jun 2003]

* Patch by Mark Rakes, 14 May 2003:
  add support for Intel e1000 gig cards.

* Patch by Nye Liu, 3 Jun 2003:
  fix critical typo in MAMR definition (include/mpc8xx.h)

* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.

* Patch by Klaus Heydeck, 2 Jun 2003
  Minor changes for KUP4K configuration

9 files changed, 1535 insertions, 287 deletions

diff --git a/board/kup4k/flash.c b/board/kup4k/flash.c
index 7297c15..619ccb9 100644
--- a/board/kup4k/flash.c
+++ b/board/kup4k/flash.c
@@ -172,6 +172,9 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 	value = value|(value<<16);
 
 	switch (value) {
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
 	case FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
@@ -191,6 +194,16 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		info->sector_count = 19;
 		info->size = 0x00100000;
 		break;				/* => 1 MB		*/
+	case AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
+	case AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;				/* => 2 MB		*/
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		return (0);			/* => no or unknown flash */
diff --git a/board/kup4k/kup4k.c b/board/kup4k/kup4k.c
index aeafa6a..b3ede17 100644
--- a/board/kup4k/kup4k.c
+++ b/board/kup4k/kup4k.c
@@ -54,10 +54,7 @@ const uint sdram_table[] =
 	/*
 	 * Single Read. (Offset 0 in UPMA RAM)
 	 */
-	0x1F07FC04,
-	0xEEAEFC04,
-	0x11ADFC04,
-	0xEFBBBC00,
+	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
 	0x1FF77C47, /* last */
 
 	/*
@@ -68,57 +65,37 @@ const uint sdram_table[] =
 	 * sequence, which is executed by a RUN command.
 	 *
 	 */
-	0x1FF77C35,
-	0xEFEABC34,
-	0x1FB57C35,  /* last */
+		    0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */
 
 	/*
 	 * Burst Read. (Offset 8 in UPMA RAM)
 	 */
-	0x1F07FC04,
-	0xEEAEFC04,
-	0x10ADFC04,
-	0xF0AFFC00,
-	0xF0AFFC00,
-	0xF1AFFC00,
-	0xEFBBBC00,
-	0x1FF77C47, /* last */
+	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/*
 	 * Single Write. (Offset 18 in UPMA RAM)
 	 */
-	0x1F27FC04,
-	0xEEAEBC00,
-	0x01B93C04,
-    0x1FF77C47, /* last */
+	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/*
 	 * Burst Write. (Offset 20 in UPMA RAM)
 	 */
-	0x1F07FC04,
-	0xEEAEBC00,
-	0x10AD7C00,
-	0xF0AFFC00,
-	0xF0AFFC00,
-	0xE1BBBC04,
-	0x1FF77C47, /* last */
-    _NOT_USED_,
+	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
+					    _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/*
 	 * Refresh  (Offset 30 in UPMA RAM)
 	 */
-	0x1FF5FC84,
-	0xFFFFFC04,
-	0xFFFFFC04,
-	0xFFFFFC04,
-	0xFFFFFC84,
-	0xFFFFFC07, /* last */
-	_NOT_USED_, _NOT_USED_,
+	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+				_NOT_USED_, _NOT_USED_,
 	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
 
 	/*
@@ -146,89 +123,96 @@ int checkboard (void)
 
 long int initdram (int board_type)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
-    volatile memctl8xx_t *memctl = &immap->im_memctl;
-    long int size_b0 = 0;
-    long int size_b1 = 0;
-    long int size_b2 = 0;
-
-    upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
-    /*
-     * Preliminary prescaler for refresh (depends on number of
-     * banks): This value is selected for four cycles every 62.4 us
-     * with two SDRAM banks or four cycles every 31.2 us with one
-     * bank. It will be adjusted after memory sizing.
-     */
-    memctl->memc_mptpr = CFG_MPTPR;
-
-    memctl->memc_mar  = 0x00000088;
-
-    /*
-     * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
-     * preliminary addresses - these have to be modified after the
-     * SDRAM size has been determined.
-     */
-/*    memctl->memc_or1 = CFG_OR1_PRELIM;	*/
-/*    memctl->memc_br1 = CFG_BR1_PRELIM;	*/
- 
-/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
-/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size_b0 = 0;
+	long int size_b1 = 0;
+	long int size_b2 = 0;
 
+	upmconfig (UPMA, (uint *) sdram_table,
+			 sizeof (sdram_table) / sizeof (uint));
 
-    memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
+	/*
+	 * Preliminary prescaler for refresh (depends on number of
+	 * banks): This value is selected for four cycles every 62.4 us
+	 * with two SDRAM banks or four cycles every 31.2 us with one
+	 * bank. It will be adjusted after memory sizing.
+	 */
+	memctl->memc_mptpr = CFG_MPTPR;
 
-    udelay(200);
+	memctl->memc_mar = 0x00000088;
 
-    /* perform SDRAM initializsation sequence */
+	/*
+	 * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at
+	 * preliminary addresses - these have to be modified after the
+	 * SDRAM size has been determined.
+	 */
+/*	memctl->memc_or1 = CFG_OR1_PRELIM;	*/
+/*	memctl->memc_br1 = CFG_BR1_PRELIM;	*/
+
+/*	memctl->memc_or2 = CFG_OR2_PRELIM;	*/
+/*	memctl->memc_br2 = CFG_BR2_PRELIM;	*/
 
-    memctl->memc_mcr  = 0x80002105;	/* SDRAM bank 0 */
-    udelay(1);
-    memctl->memc_mcr  = 0x80002830;	/* SDRAM bank 0 - execute twice */
-    udelay(1);
-    memctl->memc_mcr  = 0x80002106;	/* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
-    udelay(1);
 
-	memctl->memc_mcr  = 0x80004105;	/* SDRAM bank 1 */
-	udelay(1);
-	memctl->memc_mcr  = 0x80004830;	/* SDRAM bank 1 - execute twice */
-	udelay(1);
-    memctl->memc_mcr  = 0x80004106;	/* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
-    udelay(1);
+	memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
 
-	memctl->memc_mcr  = 0x80006105;	/* SDRAM bank 2 */
-	udelay(1);
-	memctl->memc_mcr  = 0x80006830;	/* SDRAM bank 2 - execute twice */
-	udelay(1);
-    memctl->memc_mcr  = 0x80006106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
-    udelay(1);
+	udelay (200);
 
+	/* perform SDRAM initializsation sequence */
 
-    memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+	memctl->memc_mcr = 0x80002105;	/* SDRAM bank 0 */
+	udelay (1);
+	memctl->memc_mcr = 0x80002830;	/* SDRAM bank 0 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80002106;	/* SDRAM bank 0 - RUN MRS Pattern from loc 6 */
+	udelay (1);
 
-    udelay (1000);
+	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 1 */
+	udelay (1);
+	memctl->memc_mcr = 0x80004830;	/* SDRAM bank 1 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80004106;	/* SDRAM bank 1 - RUN MRS Pattern from loc 6 */
+	udelay (1);
 
-    size_b0 = 0x00800000;
-    size_b1 = 0x00800000;
-    size_b2 = 0x00800000;
+	memctl->memc_mcr = 0x80006105;	/* SDRAM bank 2 */
+	udelay (1);
+	memctl->memc_mcr = 0x80006830;	/* SDRAM bank 2 - execute twice */
+	udelay (1);
+	memctl->memc_mcr = 0x80006106;	/* SDRAM bank 2 - RUN MRS Pattern from loc 6 */
+	udelay (1);
 
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+	udelay (1000);
 
+#if 0							/* 3 x 8MB */
+	size_b0 = 0x00800000;
+	size_b1 = 0x00800000;
+	size_b2 = 0x00800000;
 	memctl->memc_mptpr = CFG_MPTPR;
-	udelay(1000);
-
+	udelay (1000);
 	memctl->memc_or1 = 0xFF800A00;
 	memctl->memc_br1 = 0x00000081;
-
-    memctl->memc_or2 = 0xFF000A00;
-    memctl->memc_br2 = 0x00800081;
-
+	memctl->memc_or2 = 0xFF000A00;
+	memctl->memc_br2 = 0x00800081;
 	memctl->memc_or3 = 0xFE000A00;
 	memctl->memc_br3 = 0x01000081;
+#else							/* 3 x 16 MB */
+	size_b0 = 0x01000000;
+	size_b1 = 0x01000000;
+	size_b2 = 0x01000000;
+	memctl->memc_mptpr = CFG_MPTPR;
+	udelay (1000);
+	memctl->memc_or1 = 0xFF000A00;
+	memctl->memc_br1 = 0x00000081;
+	memctl->memc_or2 = 0xFE000A00;
+	memctl->memc_br2 = 0x01000081;
+	memctl->memc_or3 = 0xFC000A00;
+	memctl->memc_br3 = 0x02000081;
+#endif
 
-    udelay(10000);
-
+	udelay (10000);
 
-    return (size_b0 + size_b1 + size_b2);
+	return (size_b0 + size_b1 + size_b2);
 }
 
 /* ------------------------------------------------------------------------- */
@@ -241,46 +225,47 @@ long int initdram (int board_type)
  * - short between data lines
  */
 #if 0
-static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+static long int dram_size (long int mamr_value, long int *base,
+						   long int maxsize)
 {
-    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
-    volatile memctl8xx_t *memctl = &immap->im_memctl;
-    volatile long int	 *addr;
-    ulong		  cnt, val;
-    ulong		  save[32];	/* to make test non-destructive */
-    unsigned char	  i = 0;
-
-    memctl->memc_mamr = mamr_value;
-
-    for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) {
-	addr = base + cnt;	/* pointer arith! */
-
-	save[i++] = *addr;
-	*addr = ~cnt;
-    }
-
-    /* write 0 to base address */
-    addr = base;
-    save[i] = *addr;
-    *addr = 0;
-
-    /* check at base address */
-    if ((val = *addr) != 0) {
-	*addr = save[i];
-	return (0);
-    }
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	volatile long int *addr;
+	ulong cnt, val;
+	ulong save[32];				/* to make test non-destructive */
+	unsigned char i = 0;
 
-    for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) {
-	addr = base + cnt;	/* pointer arith! */
+	memctl->memc_mamr = mamr_value;
 
-	val = *addr;
-	*addr = save[--i];
+	for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+		addr = base + cnt;		/* pointer arith! */
 
-	if (val != (~cnt)) {
-	    return (cnt * sizeof(long));
+		save[i++] = *addr;
+		*addr = ~cnt;
 	}
-    }
-    return (maxsize);
+
+	/* write 0 to base address */
+	addr = base;
+	save[i] = *addr;
+	*addr = 0;
+
+	/* check at base address */
+	if ((val = *addr) != 0) {
+		*addr = save[i];
+		return (0);
+	}
+
+	for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+		addr = base + cnt;		/* pointer arith! */
+
+		val = *addr;
+		*addr = save[--i];
+
+		if (val != (~cnt)) {
+			return (cnt * sizeof (long));
+		}
+	}
+	return (maxsize);
 }
 #endif
 
@@ -289,155 +274,175 @@ int misc_init_r (void)
 	DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_STATUS_LED
-	volatile immap_t	*immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
 #endif
 #ifdef CONFIG_KUP4K_LOGO
 	bd_t *bd = gd->bd;
 
 
-	lcd_logo(bd);
-#endif /* CONFIG_KUP4K_LOGO */
+	lcd_logo (bd);
+#endif							/* CONFIG_KUP4K_LOGO */
 #ifdef CONFIG_IDE_LED
 	/* Configure PA8 as output port */
 	immap->im_ioport.iop_padir |= 0x80;
 	immap->im_ioport.iop_paodr |= 0x80;
 	immap->im_ioport.iop_papar &= ~0x80;
-	immap->im_ioport.iop_padat |= 0x80; /* turn it off */
+	immap->im_ioport.iop_padat |= 0x80;	/* turn it off */
 #endif
-	return(0);
+	return (0);
 }
 
 #ifdef CONFIG_KUP4K_LOGO
-void lcd_logo(bd_t *bd){
 
-    FB_INFO_S1D13xxx fb_info;
-    S1D_INDEX s1dReg;
-    S1D_VALUE s1dValue;
-    volatile immap_t     *immr  = (immap_t *)CFG_IMMR;
-    volatile	memctl8xx_t     *memctl;
+
+#define PB_LCD_PWM	((uint)0x00004000)	/* PB 17 */
+
+void lcd_logo (bd_t * bd)
+{
+
+
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+
+
+	FB_INFO_S1D13xxx fb_info;
+	S1D_INDEX s1dReg;
+	S1D_VALUE s1dValue;
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl;
 	ushort i;
 	uchar *fb;
-    int rs, gs, bs;
-    int r = 8, g = 8, b = 4;
-    int r1,g1,b1;
+	int rs, gs, bs;
+	int r = 8, g = 8, b = 4;
+	int r1, g1, b1;
+
+	immr->im_cpm.cp_pbpar &= ~PB_LCD_PWM;
+	immr->im_cpm.cp_pbodr &= ~PB_LCD_PWM;
+	immr->im_cpm.cp_pbdat &= ~PB_LCD_PWM;	/* set to 0 = enabled */
+	immr->im_cpm.cp_pbdir |= PB_LCD_PWM;
+
 
 /*----------------------------------------------------------------------------- */
-/**/
+	 /**/
 /* Initialize the chip and the frame buffer driver. */
-/**/
+			 /**/
 /*----------------------------------------------------------------------------- */
-    memctl = &immr->im_memctl;
+			memctl = &immr->im_memctl;
 /*    memctl->memc_or5 = 0xFFC007F0;    / * 4 MB  17 WS or externel TA */
 /*    memctl->memc_br5 = 0x80000801;    / * Start at 0x80000000 */
 
-    memctl->memc_or5 = 0xFFC00708;    /* 4 MB  17 WS or externel TA */
-    memctl->memc_br5 = 0x80080801;    /* Start at 0x80080000 */
+	memctl->memc_or5 = 0xFFC00708;	/* 4 MB  17 WS or externel TA */
+	memctl->memc_br5 = 0x80080801;	/* Start at 0x80080000 */
 
 
 
 
 
-    fb_info.VmemAddr = (unsigned char*)(S1D_PHYSICAL_VMEM_ADDR);
-    fb_info.RegAddr =  (unsigned char*)(S1D_PHYSICAL_REG_ADDR);
+	fb_info.VmemAddr = (unsigned char *) (S1D_PHYSICAL_VMEM_ADDR);
+	fb_info.RegAddr = (unsigned char *) (S1D_PHYSICAL_REG_ADDR);
 
-    if ((((S1D_VALUE*)fb_info.RegAddr)[0] != 0x28) || (((S1D_VALUE*)fb_info.RegAddr)[1] != 0x14))
-    {
-	  printf("Warning:LCD Controller S1D13706 not found\n");
-	  return;
-    }
+	if ((((S1D_VALUE *) fb_info.RegAddr)[0] != 0x28)
+		|| (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) {
+		printf ("Warning:LCD Controller S1D13706 not found\n");
+		return;
+	}
 
-    /* init controller */
-    for (i = 0; i < sizeof(aS1DRegs)/sizeof(aS1DRegs[0]); i++)
-    {
-        s1dReg = aS1DRegs[i].Index;
-        s1dValue = aS1DRegs[i].Value;
+	/* init controller */
+	for (i = 0; i < sizeof (aS1DRegs) / sizeof (aS1DRegs[0]); i++) {
+		s1dReg = aS1DRegs[i].Index;
+		s1dValue = aS1DRegs[i].Value;
 /*      printf("sid1 Index: %02x Register: %02x Wert: %02x\n",i, aS1DRegs[i].Index, aS1DRegs[i].Value); */
-        ((S1D_VALUE*)fb_info.RegAddr)[s1dReg/sizeof(S1D_VALUE)] = s1dValue;
-    }
+		((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] =
+				s1dValue;
+	}
 
 #undef MONOCHROME
 #ifdef MONOCHROME
-   	switch(bd->bi_busfreq){
+	switch (bd->bi_busfreq) {
 #if 0
-		case 24000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x28;
-			break;
-		case 32000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x33;
-			break;
+	case 24000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x28;
+		break;
+	case 32000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x33;
+		break;
 #endif
-		case 40000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x40;
-			break;
-		case 48000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x4C;
-			break;
-		default:
-			printf("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",bd->bi_busfreq);
-		case 64000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x69;
-			break;
+	case 40000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x40;
+		break;
+	case 48000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x4C;
+		break;
+	default:
+		printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",
+				bd->bi_busfreq);
+	case 64000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x69;
+		break;
 	}
-	((S1D_VALUE*)fb_info.RegAddr)[0x10] = 0x00;
+	((S1D_VALUE *) fb_info.RegAddr)[0x10] = 0x00;
 #else
-	   	switch(bd->bi_busfreq){
+	switch (bd->bi_busfreq) {
 #if 0
-		case 24000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x22;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x34;
-			break;
-		case 32000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x34;
-			break;
+	case 24000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
+		break;
+	case 32000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
+		break;
 #endif
-		case 40000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x41;
-			break;
-		case 48000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x22;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x34;
-			break;
-		default:
-			printf("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",bd->bi_busfreq);
-		case 64000000:
-			((S1D_VALUE*)fb_info.RegAddr)[0x05] = 0x32;
-			((S1D_VALUE*)fb_info.RegAddr)[0x12] = 0x66;
-			break;
+	case 40000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41;
+		break;
+	case 48000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34;
+		break;
+	default:
+		printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n",
+				bd->bi_busfreq);
+	case 64000000:
+		((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32;
+		((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66;
+		break;
 	}
 #endif
 
-    
-    /* create and set colormap */
-    rs = 256 / (r - 1);
-    gs = 256 / (g - 1);
-    bs = 256 / (b - 1);
-	for(i=0;i<256;i++){
-       r1=(rs * ((i / (g * b)) % r)) * 255;
-       g1=(gs * ((i / b) % g)) * 255;
-       b1=(bs * ((i) % b)) * 255;
+
+	/* create and set colormap */
+	rs = 256 / (r - 1);
+	gs = 256 / (g - 1);
+	bs = 256 / (b - 1);
+	for (i = 0; i < 256; i++) {
+		r1 = (rs * ((i / (g * b)) % r)) * 255;
+		g1 = (gs * ((i / b) % g)) * 255;
+		b1 = (bs * ((i) % b)) * 255;
 /*     printf("%d %04x %04x %04x\n",i,r1>>4,g1>>4,b1>>4); */
-       S1D_WRITE_PALETTE(fb_info.RegAddr,i,(r1>>4),(g1>>4),(b1>>4));
-    }
+		S1D_WRITE_PALETTE (fb_info.RegAddr, i, (r1 >> 4), (g1 >> 4),
+						   (b1 >> 4));
+	}
 
-    /* copy bitmap */
-	fb   = (char *) (fb_info.VmemAddr);
-	memcpy (fb, (uchar *)CONFIG_KUP4K_LOGO, 320 * 240);
+	/* copy bitmap */
+	fb = (char *) (fb_info.VmemAddr);
+	memcpy (fb, (uchar *) CONFIG_KUP4K_LOGO, 320 * 240);
 }
-#endif /* CONFIG_KUP4K_LOGO */
+#endif							/* CONFIG_KUP4K_LOGO */
 
 #ifdef CONFIG_IDE_LED
 void ide_led (uchar led, uchar status)
 {
-	volatile immap_t	*immap = (immap_t *)CFG_IMMR;
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
 	/* We have one led for both pcmcia slots */
-	if (status) { /* led on */
+	if (status) {				/* led on */
 		immap->im_ioport.iop_padat &= ~0x80;
 	} else {
 		immap->im_ioport.iop_padat |= 0x80;
diff --git a/board/kup4k/s1d13706.h b/board/kup4k/s1d13706.h
index 4eeea39..90027bf 100644
--- a/board/kup4k/s1d13706.h
+++ b/board/kup4k/s1d13706.h
@@ -50,66 +50,64 @@ typedef struct
 
 static S1D_REGS aS1DRegs[] =
 {
-
-
-    {0x04,0x10},   /* BUSCLK MEMCLK Config Register */
+	{0x04,0x10},	/* BUSCLK MEMCLK Config Register */
 #if 0
-    {0x05,0x32},   /* PCLK Config  Register  */
+	{0x05,0x32},	/* PCLK Config  Register  */
 #endif
-    {0x10,0xD0},   /* PANEL Type Register */
-    {0x11,0x00},   /* MOD Rate Register */
+	{0x10,0xD0},	/* PANEL Type Register */
+	{0x11,0x00},	/* MOD Rate Register */
 #if 0
-    {0x12,0x34},   /* Horizontal Total Register */
+	{0x12,0x34},	/* Horizontal Total Register */
 #endif
-    {0x14,0x27},   /* Horizontal Display Period Register */
-    {0x16,0x00},   /* Horizontal Display Period Start Pos Register 0 */
-    {0x17,0x00},   /* Horizontal Display Period Start Pos Register 1 */
-    {0x18,0xF0},   /* Vertical Total Register 0  */
-    {0x19,0x00},   /* Vertical Total Register 1 */
-    {0x1C,0xEF},   /* Vertical Display Period Register 0 */
-    {0x1D,0x00},   /* Vertical Display Period Register 1 */
-    {0x1E,0x00},   /* Vertical Display Period Start Pos Register 0 */
-    {0x1F,0x00},   /* Vertical Display Period Start Pos Register 1 */
-    {0x20,0x87},   /* Horizontal Sync Pulse Width Register */
-    {0x22,0x00},   /* Horizontal Sync Pulse Start Pos Register 0 */
-    {0x23,0x00},   /* Horizontal Sync Pulse Start Pos Register 1 */
-    {0x24,0x80},   /* Vertical Sync Pulse Width Register */
-    {0x26,0x01},   /* Vertical Sync Pulse Start Pos Register 0 */
-    {0x27,0x00},   /* Vertical Sync Pulse Start Pos Register 1 */
-    {0x70,0x83},   /* Display Mode Register */
-    {0x71,0x00},   /* Special Effects Register */
-    {0x74,0x00},   /* Main Window Display Start Address Register 0 */
-    {0x75,0x00},   /* Main Window Display Start Address Register 1 */
-    {0x76,0x00},   /* Main Window Display Start Address Register 2 */
-    {0x78,0x50},   /* Main Window Address Offset Register 0 */
-    {0x79,0x00},   /* Main Window Address Offset Register 1 */
-    {0x7C,0x00},   /* Sub Window Display Start Address Register 0 */
-    {0x7D,0x00},   /* Sub Window Display Start Address Register 1 */
-    {0x7E,0x00},   /* Sub Window Display Start Address Register 2 */
-    {0x80,0x50},   /* Sub Window Address Offset Register 0 */
-    {0x81,0x00},   /* Sub Window Address Offset Register 1 */
-    {0x84,0x00},   /* Sub Window X Start Pos Register 0 */
-    {0x85,0x00},   /* Sub Window X Start Pos Register 1 */
-    {0x88,0x00},   /* Sub Window Y Start Pos Register 0 */
-    {0x89,0x00},   /* Sub Window Y Start Pos Register 1 */
-    {0x8C,0x4F},   /* Sub Window X End Pos Register 0 */
-    {0x8D,0x00},   /* Sub Window X End Pos Register 1 */
-    {0x90,0xEF},   /* Sub Window Y End Pos Register 0 */
-    {0x91,0x00},   /* Sub Window Y End Pos Register 1 */
-    {0xA0,0x00},   /* Power Save Config Register */
-    {0xA1,0x00},   /* CPU Access Control Register */
-    {0xA2,0x00},   /* Software Reset Register */
-    {0xA3,0x00},   /* BIG Endian Support Register */
-    {0xA4,0x00},   /* Scratch Pad Register 0 */
-    {0xA5,0x00},   /* Scratch Pad Register 1 */
-    {0xA8,0x01},   /* GPIO Config Register 0 */
-    {0xA9,0x80},   /* GPIO Config Register 1 */
-    {0xAC,0x01},   /* GPIO Status Control Register 0 */
-    {0xAD,0x00},   /* GPIO Status Control Register 1 */
-    {0xB0,0x00},   /* PWM CV Clock Control Register */
-    {0xB1,0x00},   /* PWM CV Clock Config Register */
-    {0xB2,0x00},   /* CV Clock Burst Length Register */
-    {0xB3,0x00},   /* PWM Clock Duty Cycle Register */
-    {0xAD,0x80},   /* reset seq */
-	{0x70,0x03},   /*  */
+	{0x14,0x27},	/* Horizontal Display Period Register */
+	{0x16,0x00},	/* Horizontal Display Period Start Pos Register 0 */
+	{0x17,0x00},	/* Horizontal Display Period Start Pos Register 1 */
+	{0x18,0xF0},	/* Vertical Total Register 0  */
+	{0x19,0x00},	/* Vertical Total Register 1 */
+	{0x1C,0xEF},	/* Vertical Display Period Register 0 */
+	{0x1D,0x00},	/* Vertical Display Period Register 1 */
+	{0x1E,0x00},	/* Vertical Display Period Start Pos Register 0 */
+	{0x1F,0x00},	/* Vertical Display Period Start Pos Register 1 */
+	{0x20,0x87},	/* Horizontal Sync Pulse Width Register */
+	{0x22,0x00},	/* Horizontal Sync Pulse Start Pos Register 0 */
+	{0x23,0x00},	/* Horizontal Sync Pulse Start Pos Register 1 */
+	{0x24,0x80},	/* Vertical Sync Pulse Width Register */
+	{0x26,0x01},	/* Vertical Sync Pulse Start Pos Register 0 */
+	{0x27,0x00},	/* Vertical Sync Pulse Start Pos Register 1 */
+	{0x70,0x83},	/* Display Mode Register */
+	{0x71,0x00},	/* Special Effects Register */
+	{0x74,0x00},	/* Main Window Display Start Address Register 0 */
+	{0x75,0x00},	/* Main Window Display Start Address Register 1 */
+	{0x76,0x00},	/* Main Window Display Start Address Register 2 */
+	{0x78,0x50},	/* Main Window Address Offset Register 0 */
+	{0x79,0x00},	/* Main Window Address Offset Register 1 */
+	{0x7C,0x00},	/* Sub Window Display Start Address Register 0 */
+	{0x7D,0x00},	/* Sub Window Display Start Address Register 1 */
+	{0x7E,0x00},	/* Sub Window Display Start Address Register 2 */
+	{0x80,0x50},	/* Sub Window Address Offset Register 0 */
+	{0x81,0x00},	/* Sub Window Address Offset Register 1 */
+	{0x84,0x00},	/* Sub Window X Start Pos Register 0 */
+	{0x85,0x00},	/* Sub Window X Start Pos Register 1 */
+	{0x88,0x00},	/* Sub Window Y Start Pos Register 0 */
+	{0x89,0x00},	/* Sub Window Y Start Pos Register 1 */
+	{0x8C,0x4F},	/* Sub Window X End Pos Register 0 */
+	{0x8D,0x00},	/* Sub Window X End Pos Register 1 */
+	{0x90,0xEF},	/* Sub Window Y End Pos Register 0 */
+	{0x91,0x00},	/* Sub Window Y End Pos Register 1 */
+	{0xA0,0x00},	/* Power Save Config Register */
+	{0xA1,0x00},	/* CPU Access Control Register */
+	{0xA2,0x00},	/* Software Reset Register */
+	{0xA3,0x00},	/* BIG Endian Support Register */
+	{0xA4,0x00},	/* Scratch Pad Register 0 */
+	{0xA5,0x00},	/* Scratch Pad Register 1 */
+	{0xA8,0x01},	/* GPIO Config Register 0 */
+	{0xA9,0x80},	/* GPIO Config Register 1 */
+	{0xAC,0x01},	/* GPIO Status Control Register 0 */
+	{0xAD,0x00},	/* GPIO Status Control Register 1 */
+	{0xB0,0x10},	/* PWM CV Clock Control Register */
+	{0xB1,0x80},	/* PWM CV Clock Config Register */
+	{0xB2,0x00},	/* CV Clock Burst Length Register */
+	{0xB3,0xA0},	/* PWM Clock Duty Cycle Register */
+	{0xAD,0x80},	/* reset seq */
+	{0x70,0x03},	/*  */
 };
diff --git a/board/rbc823/Makefile b/board/rbc823/Makefile
new file mode 100644
index 0000000..f912451
--- /dev/null
+++ b/board/rbc823/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o kbd.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $^
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/rbc823/config.mk b/board/rbc823/config.mk
new file mode 100644
index 0000000..199ea3c
--- /dev/null
+++ b/board/rbc823/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# RBC823 boards
+#
+
+TEXT_BASE = 0xFFF00000
diff --git a/board/rbc823/flash.c b/board/rbc823/flash.c
new file mode 100644
index 0000000..f12d0be
--- /dev/null
+++ b/board/rbc823/flash.c
@@ -0,0 +1,470 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i=0; i < CFG_MAX_FLASH_BANKS; ++i)
+	    flash_info[i].flash_id = FLASH_UNKNOWN;
+
+	/* Detect size */
+	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+	/* Setup offsets */
+	flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* Monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE+monitor_flash_len-1,
+		      &flash_info[0]);
+#endif
+
+	size_b1 = 0 ;
+
+	flash_info[1].flash_id = FLASH_UNKNOWN;
+	flash_info[1].sector_count = -1;
+
+	flash_info[0].size = size_b0;
+	flash_info[1].size = size_b1;
+
+	return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ * Fix this to support variable sector sizes
+*/
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
+		/* set sector offsets for bottom boot block type	*/
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+	{
+		puts ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK)
+	{
+		case FLASH_MAN_AMD:	printf ("AMD ");		break;
+		case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+		case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
+		default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK)
+	{
+		case FLASH_AM040:	printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
+			break;
+		case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+					break;
+		case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+					break;
+		case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+					break;
+		case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+					break;
+		case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+					break;
+		case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+					break;
+		case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+					break;
+		case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+					break;
+		default:		printf ("Unknown Chip Type\n");
+					break;
+	}
+
+	if (info->size >> 20) {
+	    printf ("  Size: %ld MB in %d Sectors\n",
+	    	info->size >> 20,
+		info->sector_count);
+	} else {
+	    printf ("  Size: %ld KB in %d Sectors\n",
+	    	info->size >> 10,
+		info->sector_count);
+	}
+
+	puts ("  Sector Start Addresses:");
+
+	for (i=0; i<info->sector_count; ++i)
+	{
+		if ((i % 5) == 0)
+		{
+			puts ("\n   ");
+		}
+
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+
+	putc ('\n');
+	return;
+}
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	volatile unsigned char *caddr;
+	char value;
+
+	caddr = (volatile unsigned char *)addr ;
+
+	/* Write auto select command: read Manufacturer ID */
+
+#if 0
+	printf("Base address is: %08x\n", caddr);
+#endif
+
+	caddr[0x0555] = 0xAA;
+	caddr[0x02AA] = 0x55;
+	caddr[0x0555] = 0x90;
+
+	value = caddr[0];
+
+#if 0
+	printf("Manufact ID: %02x\n", value);
+#endif
+	switch (value)
+	{
+		case 0x01:
+		case AMD_MANUFACT:
+			info->flash_id = FLASH_MAN_AMD;
+		break;
+
+		case FUJ_MANUFACT:
+			info->flash_id = FLASH_MAN_FUJ;
+		break;
+
+		default:
+			info->flash_id = FLASH_UNKNOWN;
+			info->sector_count = 0;
+			info->size = 0;
+			break;
+	}
+
+	value = caddr[1];			/* device ID		*/
+#if 0
+	printf("Device ID: %02x\n", value);
+#endif
+	switch (value)
+	{
+		case AMD_ID_LV040B:
+			info->flash_id += FLASH_AM040;
+			info->sector_count = 8;
+			info->size = 0x00080000;
+			break;				/* => 512Kb 		*/
+
+		default:
+			info->flash_id = FLASH_UNKNOWN;
+			return (0);			/* => no or unknown flash */
+
+	}
+
+	flash_get_offsets ((ulong)addr, &flash_info[0]);
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++)
+	{
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		caddr = (volatile unsigned char *)(info->start[i]);
+		info->protect[i] = caddr[2] & 1;
+	}
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN)
+	{
+		caddr = (volatile unsigned char *)info->start[0];
+		*caddr = 0xF0;	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+	    (info->flash_id > FLASH_AMD_COMP)) {
+		printf ("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0x0555] = 0xAA;
+	addr[0x02AA] = 0x55;
+	addr[0x0555] = 0x80;
+	addr[0x0555] = 0xAA;
+	addr[0x02AA] = 0x55;
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (volatile unsigned char *)(info->start[sect]);
+			addr[0] = 0x30;
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (volatile unsigned char *)(info->start[l_sect]);
+
+	while ((addr[0] & 0xFF) != 0xFF)
+	{
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+DONE:
+	/* reset to read mode */
+	addr = (volatile unsigned char *)info->start[0];
+
+	addr[0] = 0xF0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	volatile unsigned char *addr = (volatile unsigned char*)(info->start[0]),
+				*cdest,*cdata;
+	ulong start;
+	int flag, count = 4 ;
+
+	cdest = (volatile unsigned char *)dest ;
+	cdata = (volatile unsigned char *)&data ;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+
+	while(count--)
+	{
+	    /* Disable interrupts which might cause a timeout here */
+	    flag = disable_interrupts();
+
+	    addr[0x0555] = 0xAA;
+	    addr[0x02AA] = 0x55;
+	    addr[0x0555] = 0xA0;
+
+	    *cdest = *cdata;
+
+	    /* re-enable interrupts if necessary */
+	    if (flag)
+	    	enable_interrupts();
+
+	    /* data polling for D7 */
+	    start = get_timer (0);
+	    while ((*cdest ^ *cdata) & 0x80)
+	    {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	    }
+
+	    cdata++ ;
+	    cdest++ ;
+	}
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c
new file mode 100644
index 0000000..f1424e4
--- /dev/null
+++ b/board/rbc823/kbd.c
@@ -0,0 +1,269 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Modified by Udi Finkelstein
+ *
+ * This file includes communication routines for SMC1 that can run even if
+ * SMC2 have already been initialized.
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <commproc.h>
+#include <devices.h>
+#include <lcd.h>
+
+#define	SMC_INDEX	0
+#define PROFF_SMC	PROFF_SMC1
+#define CPM_CR_CH_SMC	CPM_CR_CH_SMC1
+
+#define RBC823_KBD_BAUDRATE	38400
+#define CPM_KEYBOARD_BASE	0x1000
+/*
+ * Minimal serial functions needed to use one of the SMC ports
+ * as serial console interface.
+ */
+
+void smc1_setbrg (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+        volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+
+	/* Set up the baud rate generator.
+	 * See 8xx_io/commproc.c for details.
+	 *
+	 * Wire BRG2 to SMC1, BRG1 to SMC2
+	 */
+
+	cp->cp_simode = 0x00001000;
+
+	cp->cp_brgc2 =
+		(((gd->cpu_clk / 16 / RBC823_KBD_BAUDRATE)-1) << 1) | CPM_BRG_EN;
+}
+
+int smc1_init (void)
+{
+        volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile smc_t *sp;
+	volatile smc_uart_t *up;
+	volatile cbd_t *tbdf, *rbdf;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+	uint	dpaddr;
+
+	/* initialize pointers to SMC */
+
+	sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
+	up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
+
+	/* Disable transmitter/receiver.
+	*/
+	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+	/* Enable SDMA.
+	*/
+	im->im_siu_conf.sc_sdcr = 1;
+
+	/* clear error conditions */
+#ifdef	CFG_SDSR
+	im->im_sdma.sdma_sdsr = CFG_SDSR;
+#else
+	im->im_sdma.sdma_sdsr = 0x83;
+#endif
+
+	/* clear SDMA interrupt mask */
+#ifdef	CFG_SDMR
+	im->im_sdma.sdma_sdmr = CFG_SDMR;
+#else
+	im->im_sdma.sdma_sdmr = 0x00;
+#endif
+
+	/* Use Port B for SMC1 instead of other functions.
+	*/
+	cp->cp_pbpar |=  0x000000c0;
+	cp->cp_pbdir &= ~0x000000c0;
+	cp->cp_pbodr &= ~0x000000c0;
+
+	/* Set the physical address of the host memory buffers in
+	 * the buffer descriptors.
+	 */
+
+#ifdef CFG_ALLOC_DPRAM
+	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
+#else
+	dpaddr = CPM_KEYBOARD_BASE ;
+#endif
+
+	/* Allocate space for two buffer descriptors in the DP ram.
+	 * For now, this address seems OK, but it may have to
+	 * change with newer versions of the firmware.
+	 * damm: allocating space after the two buffers for rx/tx data
+	 */
+
+	rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
+	rbdf->cbd_bufaddr = (uint) (rbdf+2);
+	rbdf->cbd_sc = 0;
+	tbdf = rbdf + 1;
+	tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
+	tbdf->cbd_sc = 0;
+
+	/* Set up the uart parameters in the parameter ram.
+	*/
+	up->smc_rbase = dpaddr;
+	up->smc_tbase = dpaddr+sizeof(cbd_t);
+	up->smc_rfcr = SMC_EB;
+	up->smc_tfcr = SMC_EB;
+
+	/* Set UART mode, 8 bit, no parity, one stop.
+	 * Enable receive and transmit.
+	 */
+	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
+
+	/* Mask all interrupts and remove anything pending.
+	*/
+	sp->smc_smcm = 0;
+	sp->smc_smce = 0xff;
+
+	/* Set up the baud rate generator.
+	*/
+	smc1_setbrg ();
+
+	/* Make the first buffer the only buffer.
+	*/
+	tbdf->cbd_sc |= BD_SC_WRAP;
+	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+	/* Single character receive.
+	*/
+	up->smc_mrblr = 1;
+	up->smc_maxidl = 0;
+
+	/* Initialize Tx/Rx parameters.
+	*/
+
+	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
+	  ;
+
+	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+	while (cp->cp_cpcr & CPM_CR_FLG)  /* wait if cp is busy */
+	  ;
+
+	/* Enable transmitter/receiver.
+	*/
+	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+
+	return (0);
+}
+
+void smc1_putc(const char c)
+{
+	volatile cbd_t		*tbdf;
+	volatile char		*buf;
+	volatile smc_uart_t	*up;
+        volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
+
+	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+
+	tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
+
+	/* Wait for last character to go.
+	*/
+
+	buf = (char *)tbdf->cbd_bufaddr;
+
+	*buf = c;
+	tbdf->cbd_datlen = 1;
+	tbdf->cbd_sc |= BD_SC_READY;
+	__asm__("eieio");
+
+	while (tbdf->cbd_sc & BD_SC_READY) {
+		WATCHDOG_RESET ();
+		__asm__("eieio");
+	}
+}
+
+int smc1_getc(void)
+{
+	volatile cbd_t		*rbdf;
+	volatile unsigned char	*buf;
+	volatile smc_uart_t	*up;
+        volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
+	unsigned char		c;
+
+	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+
+	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
+
+	/* Wait for character to show up.
+	*/
+	buf = (unsigned char *)rbdf->cbd_bufaddr;
+
+	while (rbdf->cbd_sc & BD_SC_EMPTY)
+		WATCHDOG_RESET ();
+
+	c = *buf;
+	rbdf->cbd_sc |= BD_SC_EMPTY;
+
+	return(c);
+}
+
+int smc1_tstc(void)
+{
+	volatile cbd_t		*rbdf;
+	volatile smc_uart_t	*up;
+        volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
+
+	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
+
+	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
+
+	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
+}
+
+/* search for keyboard and register it if found */
+int drv_keyboard_init(void)
+{
+	int error = 0;
+	device_t kbd_dev;
+
+	if (0) {
+		/* register the keyboard */
+		memset (&kbd_dev, 0, sizeof(device_t));
+		strcpy(kbd_dev.name, "kbd");
+		kbd_dev.flags =  DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+		kbd_dev.putc = NULL;
+		kbd_dev.puts = NULL;
+		kbd_dev.getc = smc1_getc;
+		kbd_dev.tstc = smc1_tstc;
+		error = device_register (&kbd_dev);
+	} else {
+		lcd_is_enabled = 0;
+		lcd_disable();
+	}
+	return error;
+}
diff --git a/board/rbc823/rbc823.c b/board/rbc823/rbc823.c
new file mode 100644
index 0000000..24ed501
--- /dev/null
+++ b/board/rbc823/rbc823.c
@@ -0,0 +1,292 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "mpc8xx.h"
+#include <linux/mtd/doc2000.h>
+
+extern int kbd_init(void);
+extern int drv_kbd_init(void);
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
+	0x1FF77C47, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+		    0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
+					    _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0x1FF7FC07, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+const uint static_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04,
+	0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04,
+	0xFFFFFC04, 0xFFFFFC05, /* last */
+	                        _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x0FFFFC04, 0x00FFFC04, 0x00FFFC04, 0x00FFFC04,
+	0x01FFFC00, 0x3FFFFC04, 0xFFFFFC04, 0xFFFFFC05, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ *
+ * Test TQ ID string (TQM8xx...)
+ * If present, check for "L" type (no second DRAM bank),
+ * otherwise "L" type is assumed as default.
+ *
+ * Return 1 for "L" type, 0 else.
+ */
+
+int checkboard (void)
+{
+    unsigned char *s = getenv("serial#");
+
+    if (!s || strncmp(s, "TQM8", 4)) {
+	printf ("### No HW ID - assuming RBC823\n");
+	return (0);
+    }
+
+    puts(s);
+    putc ('\n');
+
+    return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    long int size_b0, size8, size9;
+
+    upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+    /*
+     * 1 Bank of 64Mbit x 2 devices 
+     */
+    memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
+    memctl->memc_mar  = 0x00000088;
+
+    /*
+     * Map controller SDRAM bank 0
+     */
+    memctl->memc_or4 = CFG_OR4_PRELIM;
+    memctl->memc_br4 = CFG_BR4_PRELIM;
+    memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+    udelay(200);
+
+    /* 
+     * Perform SDRAM initializsation sequence 
+     */
+    memctl->memc_mcr  = 0x80008105;	/* SDRAM bank 0 */
+    udelay(1);
+    memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X;
+    udelay(200);
+    memctl->memc_mcr  = 0x80008130;	/* SDRAM bank 0 - execute twice */
+    udelay(1);
+    memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X;
+    udelay(200); 
+
+    memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+    udelay (1000);
+
+    /*
+     * Preliminary prescaler for refresh (depends on number of
+     * banks): This value is selected for four cycles every 62.4 us
+     * with two SDRAM banks or four cycles every 31.2 us with one
+     * bank. It will be adjusted after memory sizing.
+     */
+    memctl->memc_mptpr = CFG_MPTPR_2BK_4K; // 16: but should be: CFG_MPTPR_1BK_4K
+
+    /*
+     * Check Bank 0 Memory Size for re-configuration
+     *
+     * try 8 column mode
+     */
+    size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE4_PRELIM, SDRAM_MAX_SIZE);
+    udelay (1000);
+
+    /*
+     * try 9 column mode
+     */
+    size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE4_PRELIM, SDRAM_MAX_SIZE);
+
+    if (size8 < size9) {		/* leave configuration at 9 columns	*/
+	size_b0 = size9;
+/*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
+    } else {				/* back to 8 columns			*/
+	size_b0 = size8;
+	memctl->memc_mamr = CFG_MAMR_8COL;
+	udelay(500);
+/*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
+    }
+
+    udelay (1000);
+
+    /*
+     * Adjust refresh rate depending on SDRAM type, both banks
+     * For types > 128 MBit leave it at the current (fast) rate
+     */
+    if ((size_b0 < 0x02000000) ) {
+	/* reduce to 15.6 us (62.4 us / quad) */
+	memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+	udelay(1000);
+    }
+
+    /* SDRAM Bank 0 is bigger - map first	*/
+
+    memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+    memctl->memc_br4 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+    udelay(10000);
+
+    return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+    volatile long int	 *addr;
+    long int		  cnt, val;
+
+    memctl->memc_mamr = mamr_value;
+
+    for (cnt = maxsize/sizeof(long)/2; cnt > 0; cnt >>= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	*addr = ~cnt;
+    }
+
+    /* write 0 to base address */
+    addr = base;
+    *addr = 0;
+
+    /* check at base address */
+    if ((val = *addr) != 0) {
+	return (0);
+    }
+
+    for (cnt = 1; cnt < maxsize/sizeof(long) ; cnt <<= 1) {
+	addr = base + cnt;	/* pointer arith! */
+
+	val = *addr;
+
+	if (val != (~cnt)) {
+	    return (cnt * sizeof(long));
+	}
+    }
+    return cnt * sizeof(long);
+    /* NOTREACHED */
+}
+
+void doc_init(void)
+{
+    volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+    volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+    upmconfig(UPMB, (uint *)static_table, sizeof(static_table)/sizeof(uint));
+    memctl->memc_mbmr = MAMR_DSA_1_CYCL;
+
+    doc_probe(FLASH_BASE1_PRELIM);
+}
+
diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds
new file mode 100644
index 0000000..b3ed704
--- /dev/null
+++ b/board/rbc823/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+