summaryrefslogtreecommitdiff
path: root/board/xpedite1k
diff options
context:
space:
mode:
authorPeter Tyser <ptyser@xes-inc.com>2009-07-17 19:01:05 -0500
committerStefan Roese <sr@denx.de>2009-07-24 06:42:31 +0200
commit108d6d0099372f9f6532c3198fbaacabc121c9b3 (patch)
treeef297aefd2ce395e25ff7059f42d0d3941846564 /board/xpedite1k
parentc86d00a2ed923002f1ab0bfb0a925522628302e9 (diff)
downloadu-boot-imx-108d6d0099372f9f6532c3198fbaacabc121c9b3.zip
u-boot-imx-108d6d0099372f9f6532c3198fbaacabc121c9b3.tar.gz
u-boot-imx-108d6d0099372f9f6532c3198fbaacabc121c9b3.tar.bz2
xpedite1k: Remove support for fixed SDRAM configuration
All XPedite1000's have SPD EEPROMs present and no fixed configuration parameters are currently defined or used Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/xpedite1k')
-rw-r--r--board/xpedite1k/xpedite1k.c64
1 files changed, 1 insertions, 63 deletions
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c
index 9abb83f..8a4e76c 100644
--- a/board/xpedite1k/xpedite1k.c
+++ b/board/xpedite1k/xpedite1k.c
@@ -29,12 +29,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#define BOOT_SMALL_FLASH 32 /* 00100000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-
-long int fixed_sdram (void);
-
int board_early_init_f(void)
{
unsigned long sdrreg;
@@ -117,64 +111,8 @@ int checkboard (void)
phys_size_t initdram (int board_type)
{
- long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram ();
-#else
- dram_size = fixed_sdram ();
-#endif
- return dram_size;
-}
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- * fixed sdram init -- doesn't use serial presence detect.
- *
- * Assumes: 128 MB, non-ECC, non-registered
- * PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram (void)
-{
- uint reg;
-
- /*--------------------------------------------------------------------
- * Setup some default
- *------------------------------------------------------------------*/
- mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
-
- /*--------------------------------------------------------------------
- * Setup for board-specific specific mem
- *------------------------------------------------------------------*/
- /*
- * Following for CAS Latency = 2.5 @ 133 MHz PLB
- */
- mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
- /* RA=10 RD=3 */
- mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
- udelay (400); /* Delay 200 usecs (min) */
-
- /*--------------------------------------------------------------------
- * Enable the controller, then wait for DCEN to complete
- *------------------------------------------------------------------*/
- mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
- for (;;) {
- mfsdram (mem_mcsts, reg);
- if (reg & 0x80000000)
- break;
- }
-
- return (128 * 1024 * 1024); /* 128 MB */
+ return spd_sdram();
}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
/*************************************************************************