summaryrefslogtreecommitdiff
path: root/board/xilinx
diff options
context:
space:
mode:
authorMichal Simek <michal.simek@xilinx.com>2013-01-23 14:09:35 +0100
committerMichal Simek <michal.simek@xilinx.com>2013-02-04 12:09:49 +0100
commit74b87c4ceb750547bf019f694b7d7490cc28a94a (patch)
tree9dc8ce51da95ac8fff5b09478ac6baca900bc8ca /board/xilinx
parent85e9c65f8a9615ac11257939e5dbd601ee811be4 (diff)
downloadu-boot-imx-74b87c4ceb750547bf019f694b7d7490cc28a94a.zip
u-boot-imx-74b87c4ceb750547bf019f694b7d7490cc28a94a.tar.gz
u-boot-imx-74b87c4ceb750547bf019f694b7d7490cc28a94a.tar.bz2
board: xilinx: Remove unused ancient i2c driver
There is new driver in the driver folder. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Rommel Custodio <sessyargc@gmail.com> Acked-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'board/xilinx')
-rw-r--r--board/xilinx/xilinx_iic/xiic_l.c484
-rw-r--r--board/xilinx/xilinx_iic/xiic_l.h150
2 files changed, 0 insertions, 634 deletions
diff --git a/board/xilinx/xilinx_iic/xiic_l.c b/board/xilinx/xilinx_iic/xiic_l.c
deleted file mode 100644
index 6b78163..0000000
--- a/board/xilinx/xilinx_iic/xiic_l.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/* $Id: xiic_l.c,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/******************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002 Xilinx Inc.
-* All rights reserved.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xiic_l.c
-*
-* This file contains low-level driver functions that can be used to access the
-* device. The user should refer to the hardware device specification for more
-* details of the device operation.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- --- ------- -----------------------------------------------
-* 1.01b jhl 5/13/02 First release
-* 1.01b jhl 10/14/02 Corrected bug in the receive function, the setup of the
-* interrupt status mask was not being done in the loop such
-* that a read would sometimes fail on the last byte because
-* the transmit error which should have been ignored was
-* being used. This would leave an extra byte in the FIFO
-* and the bus throttled such that the next operation would
-* also fail. Also updated the receive function to not
-* disable the device after the last byte until after the
-* bus transitions to not busy which is more consistent
-* with the expected behavior.
-* 1.01c ecm 12/05/02 new rev
-* </pre>
-*
-****************************************************************************/
-
-/***************************** Include Files *******************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h"
-#include "xiic_l.h"
-
-/************************** Constant Definitions ***************************/
-
-/**************************** Type Definitions *****************************/
-
-
-/***************** Macros (Inline Functions) Definitions *******************/
-
-
-/******************************************************************************
-*
-* This macro clears the specified interrupt in the IPIF interrupt status
-* register. It is non-destructive in that the register is read and only the
-* interrupt specified is cleared. Clearing an interrupt acknowledges it.
-*
-* @param BaseAddress contains the IPIF registers base address.
-*
-* @param InterruptMask contains the interrupts to be disabled
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mClearIisr(u32 BaseAddress,
-* u32 InterruptMask);
-*
-******************************************************************************/
-#define XIic_mClearIisr(BaseAddress, InterruptMask) \
- XIIF_V123B_WRITE_IISR((BaseAddress), \
- XIIF_V123B_READ_IISR(BaseAddress) & (InterruptMask))
-
-/******************************************************************************
-*
-* This macro sends the address for a 7 bit address during both read and write
-* operations. It takes care of the details to format the address correctly.
-* This macro is designed to be called internally to the drivers.
-*
-* @param SlaveAddress contains the address of the slave to send to.
-*
-* @param Operation indicates XIIC_READ_OPERATION or XIIC_WRITE_OPERATION
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mSend7BitAddr(u16 SlaveAddress, u8 Operation);
-*
-******************************************************************************/
-#define XIic_mSend7BitAddress(BaseAddress, SlaveAddress, Operation) \
-{ \
- u8 LocalAddr = (u8)(SlaveAddress << 1); \
- LocalAddr = (LocalAddr & 0xFE) | (Operation); \
- XIo_Out8(BaseAddress + XIIC_DTR_REG_OFFSET, LocalAddr); \
-}
-
-/************************** Function Prototypes ****************************/
-
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr,
- unsigned ByteCount);
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr,
- unsigned ByteCount);
-
-/************************** Variable Definitions **************************/
-
-
-/****************************************************************************/
-/**
-* Receive data as a master on the IIC bus. This function receives the data
-* using polled I/O and blocks until the data has been received. It only
-* supports 7 bit addressing and non-repeated start modes of operation. The
-* user is responsible for ensuring the bus is not busy if multiple masters
-* are present on the bus.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param Address contains the 7 bit IIC address of the device to send the
-* specified data to.
-* @param BufferPtr points to the data to be sent.
-* @param ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes received.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Recv (u32 BaseAddress, u8 Address,
- u8 * BufferPtr, unsigned ByteCount)
-{
- u8 CntlReg;
- unsigned RemainingByteCount;
-
- /* Tx error is enabled incase the address (7 or 10) has no device to answer
- * with Ack. When only one byte of data, must set NO ACK before address goes
- * out therefore Tx error must not be enabled as it will go off immediately
- * and the Rx full interrupt will be checked. If full, then the one byte
- * was received and the Tx error will be disabled without sending an error
- * callback msg.
- */
- XIic_mClearIisr (BaseAddress,
- XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK |
- XIIC_INTR_ARB_LOST_MASK);
-
- /* Set receive FIFO occupancy depth for 1 byte (zero based)
- */
- XIo_Out8 (BaseAddress + XIIC_RFD_REG_OFFSET, 0);
-
- /* 7 bit slave address, send the address for a read operation
- * and set the state to indicate the address has been sent
- */
- XIic_mSend7BitAddress (BaseAddress, Address, XIIC_READ_OPERATION);
-
- /* MSMS gets set after putting data in FIFO. Start the master receive
- * operation by setting CR Bits MSMS to Master, if the buffer is only one
- * byte, then it should not be acknowledged to indicate the end of data
- */
- CntlReg = XIIC_CR_MSMS_MASK | XIIC_CR_ENABLE_DEVICE_MASK;
- if (ByteCount == 1) {
- CntlReg |= XIIC_CR_NO_ACK_MASK;
- }
-
- /* Write out the control register to start receiving data and call the
- * function to receive each byte into the buffer
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, CntlReg);
-
- /* Clear the latched interrupt status for the bus not busy bit which must
- * be done while the bus is busy
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
- /* Try to receive the data from the IIC bus */
-
- RemainingByteCount = RecvData (BaseAddress, BufferPtr, ByteCount);
- /*
- * The receive is complete, disable the IIC device and return the number of
- * bytes that was received
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
- /* Return the number of bytes that was received */
-
- return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Receive the specified data from the device that has been previously addressed
-* on the IIC bus. This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param BufferPtr points to the buffer to hold the data that is received.
-* @param ByteCount is the number of bytes to be received.
-*
-* @return
-*
-* The number of bytes remaining to be received.
-*
-* @note
-*
-* This function does not take advantage of the receive FIFO because it is
-* designed for minimal code space and complexity. It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-* This function assumes that the calling function will disable the IIC device
-* after this function returns.
-*
-******************************************************************************/
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
- u8 CntlReg;
- u32 IntrStatusMask;
- u32 IntrStatus;
-
- /* Attempt to receive the specified number of bytes on the IIC bus */
-
- while (ByteCount > 0) {
- /* Setup the mask to use for checking errors because when receiving one
- * byte OR the last byte of a multibyte message an error naturally
- * occurs when the no ack is done to tell the slave the last byte
- */
- if (ByteCount == 1) {
- IntrStatusMask =
- XIIC_INTR_ARB_LOST_MASK | XIIC_INTR_BNB_MASK;
- } else {
- IntrStatusMask =
- XIIC_INTR_ARB_LOST_MASK |
- XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_BNB_MASK;
- }
-
- /* Wait for the previous transmit and the 1st receive to complete
- * by checking the interrupt status register of the IPIF
- */
- while (1) {
- IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
- if (IntrStatus & XIIC_INTR_RX_FULL_MASK) {
- break;
- }
- /* Check the transmit error after the receive full because when
- * sending only one byte transmit error will occur because of the
- * no ack to indicate the end of the data
- */
- if (IntrStatus & IntrStatusMask) {
- return ByteCount;
- }
- }
-
- CntlReg = XIo_In8 (BaseAddress + XIIC_CR_REG_OFFSET);
-
- /* Special conditions exist for the last two bytes so check for them
- * Note that the control register must be setup for these conditions
- * before the data byte which was already received is read from the
- * receive FIFO (while the bus is throttled
- */
- if (ByteCount == 1) {
- /* For the last data byte, it has already been read and no ack
- * has been done, so clear MSMS while leaving the device enabled
- * so it can get off the IIC bus appropriately with a stop.
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- XIIC_CR_ENABLE_DEVICE_MASK);
- }
-
- /* Before the last byte is received, set NOACK to tell the slave IIC
- * device that it is the end, this must be done before reading the byte
- * from the FIFO
- */
- if (ByteCount == 2) {
- /* Write control reg with NO ACK allowing last byte to
- * have the No ack set to indicate to slave last byte read.
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- CntlReg | XIIC_CR_NO_ACK_MASK);
- }
-
- /* Read in data from the FIFO and unthrottle the bus such that the
- * next byte is read from the IIC bus
- */
- *BufferPtr++ = XIo_In8 (BaseAddress + XIIC_DRR_REG_OFFSET);
-
- /* Clear the latched interrupt status so that it will be updated with
- * the new state when it changes, this must be done after the receive
- * register is read
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_RX_FULL_MASK |
- XIIC_INTR_TX_ERROR_MASK |
- XIIC_INTR_ARB_LOST_MASK);
- ByteCount--;
- }
-
- /* Wait for the bus to transition to not busy before returning, the IIC
- * device cannot be disabled until this occurs. It should transition as
- * the MSMS bit of the control register was cleared before the last byte
- * was read from the FIFO.
- */
- while (1) {
- if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
- break;
- }
- }
-
- return ByteCount;
-}
-
-/****************************************************************************/
-/**
-* Send data as a master on the IIC bus. This function sends the data
-* using polled I/O and blocks until the data has been sent. It only supports
-* 7 bit addressing and non-repeated start modes of operation. The user is
-* responsible for ensuring the bus is not busy if multiple masters are present
-* on the bus.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param Address contains the 7 bit IIC address of the device to send the
-* specified data to.
-* @param BufferPtr points to the data to be sent.
-* @param ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes sent.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Send (u32 BaseAddress, u8 Address,
- u8 * BufferPtr, unsigned ByteCount)
-{
- unsigned RemainingByteCount;
-
- /* Put the address into the FIFO to be sent and indicate that the operation
- * to be performed on the bus is a write operation
- */
- XIic_mSend7BitAddress (BaseAddress, Address, XIIC_WRITE_OPERATION);
-
- /* Clear the latched interrupt status so that it will be updated with the
- * new state when it changes, this must be done after the address is put
- * in the FIFO
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK |
- XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_ARB_LOST_MASK);
-
- /* MSMS must be set after putting data into transmit FIFO, indicate the
- * direction is transmit, this device is master and enable the IIC device
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- XIIC_CR_MSMS_MASK | XIIC_CR_DIR_IS_TX_MASK |
- XIIC_CR_ENABLE_DEVICE_MASK);
-
- /* Clear the latched interrupt
- * status for the bus not busy bit which must be done while the bus is busy
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
- /* Send the specified data to the device on the IIC bus specified by the
- * the address
- */
- RemainingByteCount = SendData (BaseAddress, BufferPtr, ByteCount);
-
- /*
- * The send is complete, disable the IIC device and return the number of
- * bytes that was sent
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
- return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Send the specified buffer to the device that has been previously addressed
-* on the IIC bus. This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param BaseAddress contains the base address of the IIC device.
-* @param BufferPtr points to the data to be sent.
-* @param ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes remaining to be sent.
-*
-* @note
-*
-* This function does not take advantage of the transmit FIFO because it is
-* designed for minimal code space and complexity. It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-******************************************************************************/
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
- u32 IntrStatus;
-
- /* Send the specified number of bytes in the specified buffer by polling
- * the device registers and blocking until complete
- */
- while (ByteCount > 0) {
- /* Wait for the transmit to be empty before sending any more data
- * by polling the interrupt status register
- */
- while (1) {
- IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
-
- if (IntrStatus & (XIIC_INTR_TX_ERROR_MASK |
- XIIC_INTR_ARB_LOST_MASK |
- XIIC_INTR_BNB_MASK)) {
- return ByteCount;
- }
-
- if (IntrStatus & XIIC_INTR_TX_EMPTY_MASK) {
- break;
- }
- }
- /* If there is more than one byte to send then put the next byte to send
- * into the transmit FIFO
- */
- if (ByteCount > 1) {
- XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
- *BufferPtr++);
- } else {
- /* Set the stop condition before sending the last byte of data so that
- * the stop condition will be generated immediately following the data
- * This is done by clearing the MSMS bit in the control register.
- */
- XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
- XIIC_CR_ENABLE_DEVICE_MASK |
- XIIC_CR_DIR_IS_TX_MASK);
-
- /* Put the last byte to send in the transmit FIFO */
-
- XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
- *BufferPtr++);
- }
-
- /* Clear the latched interrupt status register and this must be done after
- * the transmit FIFO has been written to or it won't clear
- */
- XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK);
-
- /* Update the byte count to reflect the byte sent and clear the latched
- * interrupt status so it will be updated for the new state
- */
- ByteCount--;
- }
-
- /* Wait for the bus to transition to not busy before returning, the IIC
- * device cannot be disabled until this occurs.
- * Note that this is different from a receive operation because the stop
- * condition causes the bus to go not busy.
- */
- while (1) {
- if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
- break;
- }
- }
-
- return ByteCount;
-}
diff --git a/board/xilinx/xilinx_iic/xiic_l.h b/board/xilinx/xilinx_iic/xiic_l.h
deleted file mode 100644
index a2c4c49..0000000
--- a/board/xilinx/xilinx_iic/xiic_l.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/*****************************************************************************
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
-* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
-* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE.
-*
-* (c) Copyright 2002 Xilinx Inc.
-* All rights reserved.
-*
-*****************************************************************************/
-/****************************************************************************/
-/**
-*
-* @file xiic_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device. High-level driver functions
-* are defined in xiic.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver Who Date Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b jhl 05/07/02 First release
-* 1.01c ecm 12/05/02 new rev
-* </pre>
-*
-*****************************************************************************/
-
-#ifndef XIIC_L_H /* prevent circular inclusions */
-#define XIIC_L_H /* by using protection macros */
-
-/***************************** Include Files ********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions ****************************/
-
-#define XIIC_MSB_OFFSET 3
-
-#define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET
-
-/*
- * Register offsets in bytes from RegisterBase. Three is added to the
- * base offset to access LSB (IBM style) of the word
- */
-#define XIIC_CR_REG_OFFSET 0x00+XIIC_REG_OFFSET /* Control Register */
-#define XIIC_SR_REG_OFFSET 0x04+XIIC_REG_OFFSET /* Status Register */
-#define XIIC_DTR_REG_OFFSET 0x08+XIIC_REG_OFFSET /* Data Tx Register */
-#define XIIC_DRR_REG_OFFSET 0x0C+XIIC_REG_OFFSET /* Data Rx Register */
-#define XIIC_ADR_REG_OFFSET 0x10+XIIC_REG_OFFSET /* Address Register */
-#define XIIC_TFO_REG_OFFSET 0x14+XIIC_REG_OFFSET /* Tx FIFO Occupancy */
-#define XIIC_RFO_REG_OFFSET 0x18+XIIC_REG_OFFSET /* Rx FIFO Occupancy */
-#define XIIC_TBA_REG_OFFSET 0x1C+XIIC_REG_OFFSET /* 10 Bit Address reg */
-#define XIIC_RFD_REG_OFFSET 0x20+XIIC_REG_OFFSET /* Rx FIFO Depth reg */
-
-/* Control Register masks */
-
-#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */
-#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */
-#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */
-#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */
-#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */
-#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */
-#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */
-
-/* Status Register masks */
-
-#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */
-#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */
-#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */
-#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */
-#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */
-#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */
-#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */
-
-/* IPIF Interrupt Status Register masks Interrupt occurs when... */
-
-#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */
-#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete*/
-#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */
-#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level*/
-#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */
-#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */
-#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */
-#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */
-
-/* IPIF Device Interrupt Register masks */
-
-#define XIIC_IPIF_IIC_MASK 0x00000004UL /* 1=inter enabled */
-#define XIIC_IPIF_ERROR_MASK 0x00000001UL /* 1=inter enabled */
-#define XIIC_IPIF_INTER_ENABLE_MASK (XIIC_IPIF_IIC_MASK | \
- XIIC_IPIF_ERROR_MASK)
-
-#define XIIC_TX_ADDR_SENT 0x00
-#define XIIC_TX_ADDR_MSTR_RECV_MASK 0x02
-
-/* The following constants specify the depth of the FIFOs */
-
-#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */
-#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */
-
-/* The following constants specify groups of interrupts that are typically
- * enabled or disables at the same time
- */
-#define XIIC_TX_INTERRUPTS \
- (XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | \
- XIIC_INTR_TX_HALF_MASK)
-
-#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
-
-/* The following constants are used with the following macros to specify the
- * operation, a read or write operation.
- */
-#define XIIC_READ_OPERATION 1
-#define XIIC_WRITE_OPERATION 0
-
-/* The following constants are used with the transmit FIFO fill function to
- * specify the role which the IIC device is acting as, a master or a slave.
- */
-#define XIIC_MASTER_ROLE 1
-#define XIIC_SLAVE_ROLE 0
-
-/**************************** Type Definitions ******************************/
-
-
-/***************** Macros (Inline Functions) Definitions ********************/
-
-
-/************************** Function Prototypes *****************************/
-
-unsigned XIic_Recv(u32 BaseAddress, u8 Address,
- u8 *BufferPtr, unsigned ByteCount);
-
-unsigned XIic_Send(u32 BaseAddress, u8 Address,
- u8 *BufferPtr, unsigned ByteCount);
-
-#endif /* end of protection macro */