ml300: remove support for broken, orphaned board

The ml300 board has a number of issues, but nobody cares about this
long-orphaned board any more.  Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Michal Simek <monstr@monstr.eu>

1 files changed, 0 insertions, 529 deletions

diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
deleted file mode 100644
index 58aaeb7..0000000
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ /dev/null
@@ -1,529 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-
-#include <config.h>
-#include <common.h>
-#include <environment.h>
-#include <net.h>
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#include <i2c.h>
-#include "xiic_l.h"
-
-#define IIC_DELAY     5000
-
-static u8 envStep = 0;		/* 0 means crc has not been read */
-const u8 hex[] = "0123456789ABCDEF"; /* lookup table for ML300 CRC */
-
-/************************************************************************
- * Use Xilinx provided driver to send data to EEPROM using iic bus.
- */
-static void
-send(u32 adr, u8 * data, u32 len)
-{
-	u8 sendBuf[34];		/* first 2-bit is address and others are data */
-	u32 pos, wlen;
-	u32 ret;
-
-	wlen = 32;
-	for (pos = 0; pos < len; pos += 32) {
-		if ((len - pos) < 32)
-			wlen = len - pos;
-
-		/* Put address and data bits together */
-		sendBuf[0] = (u8) ((adr + pos) >> 8);
-		sendBuf[1] = (u8) (adr + pos);
-		memcpy(&sendBuf[2], &data[pos], wlen);
-
-		/* Send to EEPROM through iic bus */
-		ret = XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1,
-				sendBuf, wlen + 2);
-
-		udelay(IIC_DELAY);
-	}
-}
-
-/************************************************************************
- * Use Xilinx provided driver to read data from EEPROM using the iic bus.
- */
-static void
-receive(u32 adr, u8 * data, u32 len)
-{
-	u8 address[2];
-	u32 ret;
-
-	address[0] = (u8) (adr >> 8);
-	address[1] = (u8) adr;
-
-	/* Provide EEPROM address */
-	ret =
-	    XIic_Send(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, address,
-		      2);
-	/* Receive data from EEPROM */
-	ret =
-	    XIic_Recv(XPAR_IIC_0_BASEADDR, CONFIG_SYS_I2C_EEPROM_ADDR >> 1, data, len);
-}
-
-/************************************************************************
- * Convert a hexadecimal string to its equivalent integer value.
- */
-static u8
-axtoi(u8 * hexStg)
-{
-	u8 n;			/* position in string */
-	u8 m;			/* position in digit[] to shift */
-	u8 count;		/* loop index */
-	u8 intValue;		/* integer value of hex string */
-	u8 digit[2];		/* hold values to convert */
-
-	for (n = 0; n < 2; n++) {
-		if (hexStg[n] == '\0')
-			break;
-		if (hexStg[n] > 0x29 && hexStg[n] < 0x40)
-			digit[n] = hexStg[n] & 0x0f;
-		else if (hexStg[n] >= 'a' && hexStg[n] <= 'f')
-			digit[n] = (hexStg[n] & 0x0f) + 9;
-		else if (hexStg[n] >= 'A' && hexStg[n] <= 'F')
-			digit[n] = (hexStg[n] & 0x0f) + 9;
-		else
-			break;
-	}
-
-	intValue = 0;
-	count = n;
-	m = n - 1;
-	n = 0;
-	while (n < count) {
-		intValue = intValue | (digit[n] << (m << 2));
-		m--;		/* adjust the position to set */
-		n++;		/* next digit to process */
-	}
-
-	return (intValue);
-}
-
-/************************************************************************
- * Convert an integer string to its equivalent value.
- */
-static u8
-atoi(uchar * string)
-{
-	u8 res = 0;
-	while (*string >= '0' && *string <= '9') {
-		res *= 10;
-		res += *string - '0';
-		string++;
-	}
-
-	return res;
-}
-
-/************************************************************************
- * Key-value pairs are separated by "=" sign.
- */
-static void
-findKey(uchar * buffer, int *loc, u8 len)
-{
-	u32 i;
-
-	for (i = 0; i < len; i++)
-		if (buffer[i] == '=') {
-			*loc = i;
-			return;
-		}
-
-	/* return -1 is no "=" sign found */
-	*loc = -1;
-}
-
-/************************************************************************
- * Compute a new ML300 CRC when user calls the saveenv command.
- * Also update EEPROM with new CRC value.
- */
-static u8
-update_crc(u32 len, uchar * data)
-{
-	uchar temp[6] = { 'C', '=', 0x00, 0x00, 0x00, 0x00 };
-	u32 crc;		/* new crc value */
-	u32 i;
-
-	crc = 0;
-
-	/* calculate new CRC */
-	for (i = 0; i < len; i++)
-		crc += data[i];
-
-	/* CRC includes key for check sum */
-	crc += 'C' + '=';
-
-	/* compose new CRC to be updated */
-	temp[2] = hex[(crc >> 4) & 0xf];
-	temp[3] = hex[crc & 0xf];
-
-	/* check to see if env size exceeded */
-	if (len + 6 > ENV_SIZE) {
-		printf("ERROR: not enough space to store CRC on EEPROM");
-		return 1;
-	}
-
-	memcpy(data + len, temp, 6);
-	return 0;
-}
-
-/************************************************************************
- * Read out ML300 CRC and compare it with a runtime calculated ML300 CRC.
- * If equal, then pass back a u-boot CRC value, otherwise pass back
- * junk to indicate CRC error.
-*/
-static void
-read_crc(uchar * buffer, int len)
-{
-	u32 addr, n;
-	u32 crc;		/* runtime crc */
-	u8 old[2] = { 0xff, 0xff };	/* current CRC in EEPROM */
-	u8 stop;		/* indication of end of env data */
-	u8 pre;			/* previous EEPROM data bit */
-	int i, loc;
-
-	addr = CONFIG_ENV_OFFSET;	/* start from first env address */
-	n = 0;
-	pre = 1;
-	stop = 1;
-	crc = 0;
-
-	/* calculate runtime CRC according to ML300 and read back
-	   old CRC stored in the EEPROM */
-	while (n < CONFIG_ENV_SIZE) {
-		receive(addr, buffer, len);
-
-		/* found two null chars, end of env */
-		if ((pre || buffer[0]) == 0)
-			break;
-
-		findKey(buffer, &loc, len);
-
-		/* found old check sum, read and store old CRC */
-		if ((loc == 0 && pre == 'C')
-		    || (loc > 0 && buffer[loc - 1] == 'C'))
-			receive(addr + loc + 1, old, 2);
-
-		pre = buffer[len - 1];
-
-		/* calculate runtime ML300 CRC */
-		crc += buffer[0];
-		i = 1;
-		do {
-			crc += buffer[i];
-			stop = buffer[i] || buffer[i - 1];
-			i++;
-		} while (stop && (i < len));
-
-		if (stop == 0)
-			break;
-
-		n += len;
-		addr += len;
-	}
-
-	/* exclude old CRC from runtime calculation */
-	crc -= (old[0] + old[1]);
-
-	/* match CRC values, send back u-boot CRC */
-	if ((old[0] == hex[(crc >> 4) & 0xf])
-	    && (old[1] == hex[crc & 0xf])) {
-		crc = 0;
-		n = 0;
-		addr =
-		    CONFIG_ENV_OFFSET - offsetof(env_t, crc) + offsetof(env_t,
-								     data);
-		/* calculate u-boot crc */
-		while (n < ENV_SIZE) {
-			receive(addr, buffer, len);
-			crc = crc32(crc, buffer, len);
-			n += len;
-			addr += len;
-		}
-
-		memcpy(buffer, &crc, 4);
-	}
-}
-
-/************************************************************************
- * Convert IP address to hexadecimals.
- */
-static void
-ip_ml300(uchar * s, uchar * res)
-{
-	char temp[2];
-	u8 i;
-
-	res[0] = 0x00;
-
-	for (i = 0; i < 4; i++) {
-		sprintf(temp, "%02x", atoi(s));
-		s = (uchar *)strchr((char *)s, '.') + 1;
-		strcat((char *)res, temp);
-	}
-}
-
-/************************************************************************
- * Change 0xff (255), a dummy null char to 0x00.
- */
-static void
-change_null(uchar * s)
-{
-	if (s != NULL) {
-		change_null((uchar *)strchr((char *)s + 1, 255));
-		*(strchr((char *)s, 255)) = '\0';
-	}
-}
-
-/************************************************************************
- * Update environment variable name and values to u-boot standard.
- */
-void
-convert_env(void)
-{
-	char *s;		/* pointer to env value */
-	char temp[20];		/* temp storage for addresses */
-
-	/* E -> ethaddr */
-	s = getenv("E");
-	if (s != NULL) {
-		sprintf(temp, "%c%c.%c%c.%c%c.%c%c.%c%c.%c%c",
-			s[0], s[1],  s[ 2], s[ 3],
-			s[4], s[5],  s[ 6], s[ 7],
-			s[8], s[9],  s[10], s[11] );
-		setenv("ethaddr", temp);
-		setenv("E", NULL);
-	}
-
-	/* L -> serial# */
-	s = getenv("L");
-	if (s != NULL) {
-		setenv("serial#", s);
-		setenv("L", NULL);
-	}
-
-	/* I -> ipaddr */
-	s = getenv("I");
-	if (s != NULL) {
-		sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
-			axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
-		setenv("ipaddr", temp);
-		setenv("I", NULL);
-	}
-
-	/* S -> serverip */
-	s = getenv("S");
-	if (s != NULL) {
-		sprintf(temp, "%d.%d.%d.%d", axtoi((u8 *)s), axtoi((u8 *)(s + 2)),
-			axtoi((u8 *)(s + 4)), axtoi((u8 *)(s + 6)));
-		setenv("serverip", temp);
-		setenv("S", NULL);
-	}
-
-	/* A -> bootargs */
-	s = getenv("A");
-	if (s != NULL) {
-		setenv("bootargs", s);
-		setenv("A", NULL);
-	}
-
-	/* F -> bootfile */
-	s = getenv("F");
-	if (s != NULL) {
-		setenv("bootfile", s);
-		setenv("F", NULL);
-	}
-
-	/* M -> bootcmd */
-	s = getenv("M");
-	if (s != NULL) {
-		setenv("bootcmd", s);
-		setenv("M", NULL);
-	}
-
-	/* Don't include C (CRC) */
-	setenv("C", NULL);
-}
-
-/************************************************************************
- * Save user modified environment values back to EEPROM.
- */
-static void
-save_env(void)
-{
-	char eprom[ENV_SIZE];	/* buffer to be written back to EEPROM */
-	char *s, temp[20];
-	char ff[] = { 0xff, 0x00 };	/* dummy null value */
-	u32 len;		/* length of env to be written to EEPROM */
-
-	eprom[0] = 0x00;
-
-	/* ethaddr -> E */
-	s = getenv("ethaddr");
-	if (s != NULL) {
-		strcat(eprom, "E=");
-		sprintf(temp, "%c%c%c%c%c%c%c%c%c%c%c%c",
-			*s, *(s + 1), *(s + 3), *(s + 4), *(s + 6), *(s + 7),
-			*(s + 9), *(s + 10), *(s + 12), *(s + 13), *(s + 15),
-			*(s + 16));
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* serial# -> L */
-	s = getenv("serial#");
-	if (s != NULL) {
-		strcat(eprom, "L=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* ipaddr -> I */
-	s = getenv("ipaddr");
-	if (s != NULL) {
-		strcat(eprom, "I=");
-		ip_ml300((uchar *)s, (uchar *)temp);
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* serverip -> S */
-	s = getenv("serverip");
-	if (s != NULL) {
-		strcat(eprom, "S=");
-		ip_ml300((uchar *)s, (uchar *)temp);
-		strcat(eprom, temp);
-		strcat(eprom, ff);
-	}
-
-	/* bootargs -> A */
-	s = getenv("bootargs");
-	if (s != NULL) {
-		strcat(eprom, "A=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* bootfile -> F */
-	s = getenv("bootfile");
-	if (s != NULL) {
-		strcat(eprom, "F=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	/* bootcmd -> M */
-	s = getenv("bootcmd");
-	if (s != NULL) {
-		strcat(eprom, "M=");
-		strcat(eprom, s);
-		strcat(eprom, ff);
-	}
-
-	len = strlen(eprom);	/* find env length without crc */
-	change_null((uchar *)eprom);	/* change 0xff to 0x00 */
-
-	/* update EEPROM env values if there is enough space */
-	if (update_crc(len, (uchar *)eprom) == 0)
-		send(CONFIG_ENV_OFFSET, (uchar *)eprom, len + 6);
-}
-
-/************************************************************************
- * U-boot call for EEPROM read associated activities.
- */
-int
-i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-
-	if (envStep == 0) {
-		/* first read call is for crc */
-		read_crc(buffer, len);
-		++envStep;
-		return 0;
-	} else if (envStep == 1) {
-		/* then read out EEPROM content for runtime u-boot CRC calculation */
-		receive(addr, buffer, len);
-
-		if (addr + len - CONFIG_ENV_OFFSET == CONFIG_ENV_SIZE)
-			/* end of runtime crc read */
-			++envStep;
-		return 0;
-	}
-
-	if (len < 2) {
-		/* when call getenv_r */
-		receive(addr, buffer, len);
-	} else if (addr + len < CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) {
-		/* calling env_relocate(), but don't read out
-		   crc value from EEPROM */
-		receive(addr, buffer + 4, len);
-	} else {
-		receive(addr, buffer + 4, len - 4);
-	}
-
-	return 0;
-
-}
-
-/************************************************************************
- * U-boot call for EEPROM write acativities.
- */
-int
-i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
-{
-	/* save env on last page write called by u-boot */
-	if (addr + len >= CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-		save_env();
-
-	return 0;
-}
-
-/************************************************************************
- * Dummy function.
- */
-int
-i2c_probe(uchar chip)
-{
-	return 1;
-}
-
-#endif