summaryrefslogtreecommitdiff
path: root/board/xilinx/ml300
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-09-29 22:43:59 +0000
committerwdenk <wdenk>2004-09-29 22:43:59 +0000
commita06752e36be7fc74b4a928026b63b1bf1764497e (patch)
treeb71ddbcee4e4cc03e8ea98738b605a1c3879a703 /board/xilinx/ml300
parentda93ed8147a000505ac7b7ed4e2fb50532596a3c (diff)
downloadu-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.zip
u-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.gz
u-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.bz2
* Patch by Sean Chang, 9 Aug 2004:
- Added I2C support for ML300. - Added support for ML300 to read out its environment information stored on the EEPROM. - Added support to use board specific parameters as part of U-Boot's environment information. - Updated MLD files to support configuration for new features above. * Patches by Travis Sawyer, 5 Aug 2004: - Remove incorrect bridge settings for eth group 6 - Add call to setup bridge in ppc_440x_eth_initialize - Fix ppc_440x_eth_init to reset the phy only if its the first time through, otherwise, just check the phy for the autonegotiated speed/duplex. This allows the use of netconsole - only print the speed/duplex the first time the phy is reset.
Diffstat (limited to 'board/xilinx/ml300')
-rw-r--r--board/xilinx/ml300/Makefile13
-rw-r--r--board/xilinx/ml300/ml300.c31
-rw-r--r--board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes72
-rw-r--r--board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld8
-rw-r--r--board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl29
-rw-r--r--board/xilinx/ml300/xparameters.h110
6 files changed, 154 insertions, 109 deletions
diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile
index d9007c0..880c494 100644
--- a/board/xilinx/ml300/Makefile
+++ b/board/xilinx/ml300/Makefile
@@ -19,22 +19,23 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
-#
include $(TOPDIR)/config.mk
-CFLAGS += -I../ml300 -I../common -I../xilinx_enet
+CFLAGS += -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
LIB = lib$(BOARD).a
-OBJS = $(BOARD).o serial.o \
- ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
+OBJS = $(BOARD).o \
+ serial.o \
+ ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
- ../xilinx_enet/xemac_intr_dma.o \
+ ../xilinx_enet/xemac_intr_dma.o ../xilinx_iic/iic_adapter.o \
+ ../xilinx_iic/xiic_l.o ../common/xipif_v1_23_b.o \
../common/xbasic_types.o ../common/xdma_channel.o \
../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
- ../common/xversion.o
+ ../common/xversion.o \
SOBJS = init.o
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
index dbe8a8a..f335fc1 100644
--- a/board/xilinx/ml300/ml300.c
+++ b/board/xilinx/ml300/ml300.c
@@ -42,6 +42,10 @@
#include <asm/processor.h>
#include "xparameters.h"
+#ifdef CFG_ENV_IS_IN_EEPROM
+extern void convert_env(void);
+#endif
+
int
board_pre_init(void)
{
@@ -51,22 +55,25 @@ board_pre_init(void)
int
checkboard(void)
{
- unsigned char *s = getenv("serial#");
- unsigned char *e;
+ uchar tmp[64]; /* long enough for environment variables */
+ uchar *s, *e;
+ int i = getenv_r("L", tmp, sizeof (tmp));
- if (!s || strncmp(s, "ML300", 9)) {
+ if (i < 0) {
printf("### No HW ID - assuming ML300");
} else {
- for (e = s; *e; ++e) {
+ for (e = tmp; *e; ++e) {
if (*e == ' ')
break;
}
- for (; s < e; ++s) {
+ printf("### Board Serial# is ");
+
+ for (s = tmp; s < e; ++s) {
putc(*s);
}
- }
+ }
putc('\n');
return (0);
@@ -107,3 +114,15 @@ get_PCI_freq(void)
val = sys_info.freqPCI;
return val;
}
+
+#ifdef CONFIG_MISC_INIT_R
+
+int
+misc_init_r()
+{
+ /* convert env name and value to u-boot standard */
+ convert_env();
+ return 0;
+}
+
+#endif
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
index 319b925..9daf147 100644
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
@@ -1,41 +1,55 @@
#!/bin/bash
-if[$
-# -ne 1 ]
- then echo "usage: Ltypes filename" > &2 exit 2 fi FILE = "$1"
+if [ $# -ne 1 ]
+then
+ echo "usage: Ltypes filename" >&2
+ exit 2
+fi
+
+FILE="$1"
#TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1
- TMPFILE = $ {
- FILE}
+TMPFILE=${FILE}.`date "+%s"`
+touch $TMPFILE || exit 1
- . ` date "+%s" ` touch $TMPFILE || exit 1
# Change all the Xilinx types to Linux types and put the result into a temp file
- sed
- - e 's/\bXTRUE\b/TRUE/g'
- - e 's/\bXFALSE\b/FALSE/g'
- - e 's/\bXNULL\b/NULL/g'
- - e 's/<asm/delay.h>/<asm\/delay.h>/g'
- - e 's/\bXENV_USLEEP\b/udelay/g'
- - e 's/\bXuint8\b/u8/g'
- - e 's/\bXuint16\b/u16/g'
- - e 's/\bXuint32\b/u32/g'
- - e 's/\bXint8\b/s8/g'
- - e 's/\bXint16\b/s16/g'
- - e 's/\bXint32\b/s32/g' - e 's/\bXboolean\b/u32/g' "${FILE}" > "${TMPFILE}"
+sed \
+ -e 's/\bXTRUE\b/TRUE/g' \
+ -e 's/\bXFALSE\b/FALSE/g' \
+ -e 's/\bXNULL\b/NULL/g' \
+ -e 's/"xenv.h"/<asm\/delay.h>/g' \
+ -e 's/\bXENV_USLEEP\b/udelay/g' \
+ -e 's/\bXuint8\b/u8/g' \
+ -e 's/\bXuint16\b/u16/g' \
+ -e 's/\bXuint32\b/u32/g' \
+ -e 's/\bXint8\b/s8/g' \
+ -e 's/\bXint16\b/s16/g' \
+ -e 's/\bXint32\b/s32/g' \
+ -e 's/\bXboolean\b/u32/g' \
+ "${FILE}" > "${TMPFILE}"
+
# Overlay the original file with the temp file
- mv "${TMPFILE}" "${FILE}"
+mv "${TMPFILE}" "${FILE}"
+
# Are we doing xbasic_types.h?
- if["${FILE##*/}" = xbasic_types.h]
- then
-# Remember as you're reading this that we've already gone through the prior
-# sed script. We need to do some other things to xbasic_types.h:
-# 1) Add ifndefs around TRUE and FALSE defines
-# 2) Remove definition of NULL as NULL
-# 3) Replace most of the primitive types section with a #include
- sed - e '/u32 true/,/#define false/Ic\
+if [ "${FILE##*/}" = xbasic_types.h ]
+then
+ # Remember as you're reading this that we've already gone through the prior
+ # sed script. We need to do some other things to xbasic_types.h:
+ # 1) Add ifndefs around TRUE and FALSE defines
+ # 2) Remove definition of NULL as NULL
+ # 3) Replace most of the primitive types section with a #include
+ sed \
+ -e '/u32 true/,/#define false/Ic\
#ifndef TRUE\
#define TRUE 1\
#endif\
#ifndef FALSE\
#define FALSE 0\
-#endif' - e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' - e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\
-#include <linux/types.h>' "${FILE}" > "${TMPFILE}" mv "${TMPFILE}" "${FILE}" fi
+#endif' \
+ -e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' \
+ -e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\
+#include <linux/types.h>' \
+ "${FILE}" > "${TMPFILE}"
+
+ mv "${TMPFILE}" "${FILE}"
+fi
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
index e1aa7fd..5169241 100644
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
@@ -42,7 +42,11 @@ BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot";
PROPERTY size = 0;
PARAM name = periph_name, desc = "Name of Peripheral connected", type = string;
END ARRAY
- PARAMETER name = TARGET_DIR, desc =
- "Target Directory for U-Boot BSP", type = string;
+ PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string;
+
+# location of persistent storage in the IIC EEPROM (defaults are set for ML300)
+PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024;
+PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047;
+PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0;
END LIBRARY
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
index 8d939b4..9d44f44 100644
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
@@ -76,12 +76,18 @@ proc generate {libname} {
xredefine_uartns550 $drv "xparameters.h"
} elseif {[string compare -nocase $drvname "emac"] == 0} {
xredefine_emac $drv "xparameters.h"
+ } elseif {[string compare -nocase $drvname "iic"] == 0} {
+ xredefine_iic $drv "xparameters.h"
}
}
}
# define core_clock
xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ"
+
+ # define the values for the persistent storage in IIC
+ xredefine_params $libname "xparameters.h" "IIC_PERSISTENT_BASEADDR" "IIC_PERSISTENT_HIGHADDR" "IIC_PERSISTENT_EEPROMADDR"
+
}
proc xget_corefreq {} {
@@ -117,7 +123,16 @@ proc xredefine_params {handle file_name args} {
if {$value != ""} {
set value [xformat_addr_string $value $arg]
- set name [string toupper $arg]
+
+ if {[string compare -nocase $arg "IIC_PERSISTENT_BASEADDR"] == 0} {
+ set name "PERSISTENT_0_IIC_0_BASEADDR"
+ } elseif {[string compare -nocase $arg "IIC_PERSISTENT_HIGHADDR"] == 0} {
+ set name "PERSISTENT_0_IIC_0_HIGHADDR"
+ } elseif {[string compare -nocase $arg "IIC_PERSISTENT_EEPROMADDR"] == 0} {
+ set name "PERSISTENT_0_IIC_0_EEPROMADDR"
+ } else {
+ set name [string toupper $arg]
+ }
set name [format "XPAR_%s" $name]
puts $file_handle "#define $name $value"
}
@@ -140,6 +155,11 @@ proc xredefine_emac {drvhandle file_name} {
}
+proc xredefine_iic {drvhandle file_name} {
+ xredefine_include_file $drvhandle $file_name "iic" "C_BASEADDR" "C_HIGHADDR" "C_TEN_BIT_ADR" "DEVICE_ID"
+
+}
+
#######################
proc xredefine_include_file {drv_handle file_name drv_string args} {
@@ -221,6 +241,8 @@ proc post_generate {lib_handle} {
if {[string compare -nocase $drvname "emac"] == 0} {
xcopy_emac $drv $dirname
+ } elseif {[string compare -nocase $drvname "iic"] == 0} {
+ xcopy_iic $drv $dirname
}
}
@@ -267,6 +289,11 @@ proc xcopy_emac {drv_handle dirname} {
xcopy_dir $dirname $emac
}
+proc xcopy_iic {drv_handle dirname} {
+ set iic "board/xilinx/xilinx_iic"
+ xcopy_dir $dirname $iic
+}
+
proc xcopy_dir {srcdir dstdir} {
set dstdirname [format "%s%s" "uboot/" $dstdir]
diff --git a/board/xilinx/ml300/xparameters.h b/board/xilinx/ml300/xparameters.h
index c636256..2c56737 100644
--- a/board/xilinx/ml300/xparameters.h
+++ b/board/xilinx/ml300/xparameters.h
@@ -1,48 +1,58 @@
/*******************************************************************
*
* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 6.1.2 EDK_G.14
+* Version: Xilinx EDK 6.2 EDK_Gm.11
* DO NOT EDIT.
*
-* Author: Xilinx, Inc.
-*
-*
-* This program is free software; you can redistribute it and/or modify it
-* under the terms of the GNU General Public License as published by the
-* Free Software Foundation; either version 2 of the License, or (at your
-* option) any later version.
-*
-*
-* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-* COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-* ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-* XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-* FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-* ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-* XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-* THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-* WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-* CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-* FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-* Xilinx hardware products are not intended for use in life support
-* appliances, devices, or systems. Use in such applications is
-* expressly prohibited.
-*
-*
-* (c) Copyright 2002-2004 Xilinx Inc.
-* All rights reserved.
-*
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 675 Mass Ave, Cambridge, MA 02139, USA.
+* Copyright (c) 2003 Xilinx, Inc. All rights reserved.
*
* Description: Driver parameters
*
*******************************************************************/
+/******************************************************************/
+
+/* U-Boot Redefines */
+
+/******************************************************************/
+
+#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
+#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
+#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
+#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
+#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
+#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
+#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
+#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
+#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
+#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
+#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
+#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
+#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
+#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
+#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
+#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
+
+/******************************************************************/
+
+#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
+
+/******************************************************************/
+
+#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
+#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
+#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
+
+/******************************************************************/
+
#define XPAR_XPCI_NUM_INSTANCES 1
#define XPAR_XPCI_CLOCK_HZ 33333333
#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
@@ -181,36 +191,6 @@
/******************************************************************/
-#define STDIN_BASEADDRESS 0xA0000000
-#define STDOUT_BASEADDRESS 0xA0000000
#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
/******************************************************************/
-
-/* U-Boot Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
-#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
-#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-
-/******************************************************************/