* Patch by Sean Chang, 9 Aug 2004:

  - Added I2C support for ML300.
  - Added support for ML300 to read out its environment information
    stored on the EEPROM.
  - Added support to use board specific parameters as part of
    U-Boot's environment information.
  - Updated MLD files to support configuration for new features
    above.

* Patches by Travis Sawyer, 5 Aug 2004:
  - Remove incorrect bridge settings for eth group 6
  - Add call to setup bridge in ppc_440x_eth_initialize
  - Fix ppc_440x_eth_init to reset the phy only if its the
    first time through, otherwise, just check the phy for the
    autonegotiated speed/duplex.  This allows the use of netconsole
  - only print the speed/duplex the first time the phy is reset.

3 files changed, 77 insertions, 32 deletions

diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
index 319b925..9daf147 100644
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/Ltypes
@@ -1,41 +1,55 @@
 #!/bin/bash
 
-if[$
-# -ne 1 ]
-   then echo "usage: Ltypes filename" > &2 exit 2 fi FILE = "$1"
+if [ $# -ne 1 ]
+then
+    echo "usage: Ltypes filename" >&2
+    exit 2
+fi
+
+FILE="$1"
 #TMPFILE='mktemp "${FILE}.XXXXXX"' || exit 1
-   TMPFILE = $ {
-   FILE}
+TMPFILE=${FILE}.`date "+%s"`
+touch $TMPFILE || exit 1
 
-   . ` date "+%s" ` touch $TMPFILE || exit 1
 # Change all the Xilinx types to Linux types and put the result into a temp file
-   sed
-   - e 's/\bXTRUE\b/TRUE/g'
-   - e 's/\bXFALSE\b/FALSE/g'
-   - e 's/\bXNULL\b/NULL/g'
-   - e 's/<asm/delay.h>/<asm\/delay.h>/g'
-   - e 's/\bXENV_USLEEP\b/udelay/g'
-   - e 's/\bXuint8\b/u8/g'
-   - e 's/\bXuint16\b/u16/g'
-   - e 's/\bXuint32\b/u32/g'
-   - e 's/\bXint8\b/s8/g'
-   - e 's/\bXint16\b/s16/g'
-   - e 's/\bXint32\b/s32/g' - e 's/\bXboolean\b/u32/g' "${FILE}" > "${TMPFILE}"
+sed	\
+	-e 's/\bXTRUE\b/TRUE/g' \
+	-e 's/\bXFALSE\b/FALSE/g' \
+	-e 's/\bXNULL\b/NULL/g' \
+	-e 's/"xenv.h"/<asm\/delay.h>/g' \
+	-e 's/\bXENV_USLEEP\b/udelay/g' \
+	-e 's/\bXuint8\b/u8/g' \
+	-e 's/\bXuint16\b/u16/g' \
+	-e 's/\bXuint32\b/u32/g' \
+	-e 's/\bXint8\b/s8/g' \
+	-e 's/\bXint16\b/s16/g' \
+	-e 's/\bXint32\b/s32/g' \
+	-e 's/\bXboolean\b/u32/g' \
+	"${FILE}" > "${TMPFILE}"
+
 # Overlay the original file with the temp file
-   mv "${TMPFILE}" "${FILE}"
+mv "${TMPFILE}" "${FILE}"
+
 # Are we doing xbasic_types.h?
-   if["${FILE##*/}" = xbasic_types.h]
-   then
-# Remember as you're reading this that we've already gone through the prior
-# sed script.  We need to do some other things to xbasic_types.h:
-#   1) Add ifndefs around TRUE and FALSE defines
-#   2) Remove definition of NULL as NULL
-#   3) Replace most of the primitive types section with a #include
-   sed - e '/u32 true/,/#define false/Ic\
+if [ "${FILE##*/}" = xbasic_types.h ]
+then
+    # Remember as you're reading this that we've already gone through the prior
+    # sed script.  We need to do some other things to xbasic_types.h:
+    #   1) Add ifndefs around TRUE and FALSE defines
+    #   2) Remove definition of NULL as NULL
+    #   3) Replace most of the primitive types section with a #include
+    sed \
+	-e '/u32 true/,/#define false/Ic\
 #ifndef TRUE\
 #define TRUE 1\
 #endif\
 #ifndef FALSE\
 #define FALSE 0\
-#endif' - e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' - e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\
-#include <linux/types.h>' "${FILE}" > "${TMPFILE}" mv "${TMPFILE}" "${FILE}" fi
+#endif' \
+	-e '/#define[[:space:]][[:space:]]*NULL[[:space:]][[:space:]]*NULL/d' \
+	-e '/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*char[[:space:]][[:space:]]*u8/,/typedef[[:space:]][[:space:]]*unsigned[[:space:]][[:space:]]*long[[:space:]][[:space:]]*u32.*boolean/c\
+#include <linux/types.h>' \
+	"${FILE}" > "${TMPFILE}"
+
+    mv "${TMPFILE}" "${FILE}"
+fi
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
index e1aa7fd..5169241 100644
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld
@@ -42,7 +42,11 @@ BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot";
 PROPERTY size = 0;
 PARAM name = periph_name, desc = "Name of Peripheral connected", type = string;
 END ARRAY
-    PARAMETER name = TARGET_DIR, desc =
-    "Target Directory for U-Boot BSP", type = string;
+    PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string;
+
+# location of persistent storage in the IIC EEPROM (defaults are set for ML300)
+PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024;
+PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047;
+PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0;
 
 END LIBRARY
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
index 8d939b4..9d44f44 100644
--- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
+++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.tcl
@@ -76,12 +76,18 @@ proc generate {libname} {
 		xredefine_uartns550 $drv "xparameters.h"
 	    }  elseif {[string compare -nocase $drvname "emac"] == 0} {
 		xredefine_emac $drv "xparameters.h"
+	    }  elseif {[string compare -nocase $drvname "iic"] == 0} {
+		xredefine_iic $drv "xparameters.h"
 	    }
 	}
     }
     
     # define core_clock
     xredefine_params $libname "xparameters.h" "CORE_CLOCK_FREQ_HZ"
+
+    # define the values for the persistent storage in IIC
+    xredefine_params $libname "xparameters.h" "IIC_PERSISTENT_BASEADDR" "IIC_PERSISTENT_HIGHADDR" "IIC_PERSISTENT_EEPROMADDR"
+
 }
 
 proc xget_corefreq {} {
@@ -117,7 +123,16 @@ proc xredefine_params {handle file_name args} {
 	
 	if {$value != ""} {
 	    set value [xformat_addr_string $value $arg]
-	    set name [string toupper $arg]
+
+	    if {[string compare -nocase $arg "IIC_PERSISTENT_BASEADDR"] == 0} {
+		set name "PERSISTENT_0_IIC_0_BASEADDR"
+	    } elseif {[string compare -nocase $arg "IIC_PERSISTENT_HIGHADDR"] == 0} {
+		set name "PERSISTENT_0_IIC_0_HIGHADDR"
+	    } elseif {[string compare -nocase $arg "IIC_PERSISTENT_EEPROMADDR"] == 0} {
+		set name "PERSISTENT_0_IIC_0_EEPROMADDR"
+	    } else {
+		set name [string toupper $arg]
+	    }
 	    set name [format "XPAR_%s" $name]
 	    puts $file_handle "#define $name $value"
 	}
@@ -140,6 +155,11 @@ proc xredefine_emac {drvhandle file_name} {
     
 }
 
+proc xredefine_iic {drvhandle file_name} {
+    xredefine_include_file $drvhandle $file_name "iic" "C_BASEADDR" "C_HIGHADDR" "C_TEN_BIT_ADR" "DEVICE_ID"
+
+}
+
 #######################
 
 proc xredefine_include_file {drv_handle file_name drv_string args} {
@@ -221,6 +241,8 @@ proc post_generate {lib_handle} {
 	
 	if {[string compare -nocase $drvname "emac"] == 0} {
 	    xcopy_emac $drv $dirname
+	} elseif {[string compare -nocase $drvname "iic"] == 0} {
+	    xcopy_iic $drv $dirname
 	}
     }
     
@@ -267,6 +289,11 @@ proc xcopy_emac {drv_handle dirname} {
     xcopy_dir $dirname $emac
 }
 
+proc xcopy_iic {drv_handle dirname} {
+    set iic "board/xilinx/xilinx_iic"
+    xcopy_dir $dirname $iic
+}
+
 proc xcopy_dir {srcdir dstdir} {
     
     set dstdirname [format "%s%s" "uboot/" $dstdir]