diff options
author | wdenk <wdenk> | 2004-09-29 22:43:59 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2004-09-29 22:43:59 +0000 |
commit | a06752e36be7fc74b4a928026b63b1bf1764497e (patch) | |
tree | b71ddbcee4e4cc03e8ea98738b605a1c3879a703 /board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld | |
parent | da93ed8147a000505ac7b7ed4e2fb50532596a3c (diff) | |
download | u-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.zip u-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.gz u-boot-imx-a06752e36be7fc74b4a928026b63b1bf1764497e.tar.bz2 |
* Patch by Sean Chang, 9 Aug 2004:
- Added I2C support for ML300.
- Added support for ML300 to read out its environment information
stored on the EEPROM.
- Added support to use board specific parameters as part of
U-Boot's environment information.
- Updated MLD files to support configuration for new features
above.
* Patches by Travis Sawyer, 5 Aug 2004:
- Remove incorrect bridge settings for eth group 6
- Add call to setup bridge in ppc_440x_eth_initialize
- Fix ppc_440x_eth_init to reset the phy only if its the
first time through, otherwise, just check the phy for the
autonegotiated speed/duplex. This allows the use of netconsole
- only print the speed/duplex the first time the phy is reset.
Diffstat (limited to 'board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld')
-rw-r--r-- | board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld | 8 |
1 files changed, 6 insertions, 2 deletions
diff --git a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld index e1aa7fd..5169241 100644 --- a/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld +++ b/board/xilinx/ml300/sw_services/uboot_v1_00_a/data/uboot_v2_1_0.mld @@ -42,7 +42,11 @@ BEGIN ARRAY connected_periphs PROPERTY desc = "Peripherals connected to U-Boot"; PROPERTY size = 0; PARAM name = periph_name, desc = "Name of Peripheral connected", type = string; END ARRAY - PARAMETER name = TARGET_DIR, desc = - "Target Directory for U-Boot BSP", type = string; + PARAMETER name = TARGET_DIR, desc = "Target Directory for U-Boot BSP", type = string; + +# location of persistent storage in the IIC EEPROM (defaults are set for ML300) +PARAMETER name = IIC_PERSISTENT_BASEADDR, desc = "Start of persistent storage block in the EEPROM address space", type = int, default = 1024; +PARAMETER name = IIC_PERSISTENT_HIGHADDR, desc = "End of persistent storage block in the EEPROM address space", type = int, default = 2047; +PARAMETER name = IIC_PERSISTENT_EEPROMADDR, desc = "Address of the EEPROM on the IIC bus", type = int, default = 0xA0; END LIBRARY |