xes: Make X-ES board names more generic

Some U-Boot images for X-ES boards support multiple products in the same
family.  For example, the XPedite5370, XPedite5371, and XPedite5372 are
similar enough that one U-Boot image can work on all 3 cards.  To make it
clear that a U-Boot image can work on boards of the same family, rename
the boards with the least significant digit of 'x'.

While we're at it, change the board config file and make targets to be
lowercase.

Also change the default uImage and fdt filenames to "board.uImage" and
"board.dtb" to be more generic.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

4 files changed, 0 insertions, 363 deletions

diff --git a/board/xes/xpedite5170/Makefile b/board/xes/xpedite5170/Makefile
deleted file mode 100644
index fea6686..0000000
--- a/board/xes/xpedite5170/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS-y	+= $(BOARD).o
-COBJS-y	+= ddr.o
-COBJS-y	+= law.o
-
-SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y))
-SOBJS	:= $(addprefix $(obj),$(SOBJS-y))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude ($obj).depend
-
-#########################################################################
diff --git a/board/xes/xpedite5170/ddr.c b/board/xes/xpedite5170/ddr.c
deleted file mode 100644
index 1d57d09..0000000
--- a/board/xes/xpedite5170/ddr.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * Copyright 2009 Extreme Engineering Solutions, Inc.
- * Copyright 2007-2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
-{
-	i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd,
-		sizeof(ddr2_spd_eeprom_t));
-}
-
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
-	return get_bus_freq(0);
-}
-
-void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
-			unsigned int ctrl_num)
-{
-	unsigned int i;
-	unsigned int i2c_address = 0;
-
-	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
-		if (ctrl_num == 0) {
-			i2c_address = SPD_EEPROM_ADDRESS1;
-#ifdef SPD_EEPROM_ADDRESS2
-		} else if (ctrl_num == 1) {
-			i2c_address = SPD_EEPROM_ADDRESS2;
-#endif
-		} else {
-			/* An inalid ctrl number was give, use default SPD */
-			printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num);
-			i2c_address = SPD_EEPROM_ADDRESS1;
-		}
-
-		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
-	}
-}
-
-/*
- * There are four board-specific SDRAM timing parameters which must be
- * calculated based on the particular PCB artwork.  These are:
- *   1.) CPO (Read Capture Delay)
- *           - TIMING_CFG_2 register
- *           Source: Calculation based on board trace lengths and
- *                   chip-specific internal delays.
- *   2.) WR_DATA_DELAY (Write Command to Data Strobe Delay)
- *           - TIMING_CFG_2 register
- *           Source: Calculation based on board trace lengths.
- *                   Unless clock and DQ lanes are very different
- *                   lengths (>2"), this should be set to the nominal value
- *                   of 1/2 clock delay.
- *   3.) CLK_ADJUST (Clock and Addr/Cmd alignment control)
- *           - DDR_SDRAM_CLK_CNTL register
- *           Source: Signal Integrity Simulations
- *   4.) 2T Timing on Addr/Ctl
- *           - TIMING_CFG_2 register
- *           Source: Signal Integrity Simulations
- *           Usually only needed with heavy load/very high speed (>DDR2-800)
- *
- *     PCB routing on the XPedite5170 is nearly identical to the XPedite5370
- *     so we use the XPedite5370 settings as a basis for the XPedite5170.
- */
-
-typedef struct board_memctl_options {
-	uint16_t datarate_mhz_low;
-	uint16_t datarate_mhz_high;
-	uint8_t clk_adjust;
-	uint8_t cpo_override;
-	uint8_t write_data_delay;
-} board_memctl_options_t;
-
-static struct board_memctl_options bopts_ctrl[][2] = {
-	{
-		/* Controller 0 */
-		{
-			/* DDR2 600/667 */
-			.datarate_mhz_low	= 500,
-			.datarate_mhz_high	= 750,
-			.clk_adjust		= 5,
-			.cpo_override		= 8,
-			.write_data_delay	= 2,
-		},
-		{
-			/* DDR2 800 */
-			.datarate_mhz_low	= 750,
-			.datarate_mhz_high	= 850,
-			.clk_adjust		= 5,
-			.cpo_override		= 9,
-			.write_data_delay	= 2,
-		},
-	},
-	{
-		/* Controller 1 */
-		{
-			/* DDR2 600/667 */
-			.datarate_mhz_low	= 500,
-			.datarate_mhz_high	= 750,
-			.clk_adjust		= 5,
-			.cpo_override		= 7,
-			.write_data_delay	= 2,
-		},
-		{
-			/* DDR2 800 */
-			.datarate_mhz_low	= 750,
-			.datarate_mhz_high	= 850,
-			.clk_adjust		= 5,
-			.cpo_override		= 8,
-			.write_data_delay	= 2,
-		},
-	},
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-			dimm_params_t *pdimm,
-			unsigned int ctrl_num)
-{
-	struct board_memctl_options *bopts = bopts_ctrl[ctrl_num];
-	sys_info_t sysinfo;
-	int i;
-	unsigned int datarate;
-
-	get_sys_info(&sysinfo);
-	datarate = fsl_ddr_get_mem_data_rate() / 1000000;
-
-	for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
-		if ((bopts[i].datarate_mhz_low <= datarate) &&
-		    (bopts[i].datarate_mhz_high >= datarate)) {
-			debug("controller %d:\n", ctrl_num);
-			debug(" clk_adjust = %d\n", bopts[i].clk_adjust);
-			debug(" cpo = %d\n", bopts[i].cpo_override);
-			debug(" write_data_delay = %d\n",
-				bopts[i].write_data_delay);
-			popts->clk_adjust = bopts[i].clk_adjust;
-			popts->cpo_override = bopts[i].cpo_override;
-			popts->write_data_delay = bopts[i].write_data_delay;
-		}
-	}
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
diff --git a/board/xes/xpedite5170/law.c b/board/xes/xpedite5170/law.c
deleted file mode 100644
index 0b7d9ef..0000000
--- a/board/xes/xpedite5170/law.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * Notes:
- *    CCSRBAR don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- */
-
-struct law_entry law_table[] = {
-	SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-#ifdef CONFIG_SYS_NAND_BASE
-	/* NAND LAW covers 2 NAND flashes */
-	SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_512K, LAW_TRGT_IF_LBC),
-#endif
-#ifdef CONFIG_SYS_PCIE1_MEM_PHYS
-	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
-#endif
-#ifdef CONFIG_SYS_PCIE2_MEM_PHYS
-	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2),
-#endif
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c
deleted file mode 100644
index 0f7fa6c..0000000
--- a/board/xes/xpedite5170/xpedite5170.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright 2009 Extreme Engineering Solutions, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <fdt_support.h>
-#include <pca953x.h>
-#include "../common/fsl_8xxx_misc.h"
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI)
-extern void ft_board_pci_setup(void *blob, bd_t *bd);
-#endif
-
-/*
- * Print out which flash was booted from and if booting from the 2nd flash,
- * swap flash chip selects to maintain consistent flash numbering/addresses.
- */
-static void flash_cs_fixup(void)
-{
-	int flash_sel;
-
-	/*
-	 * Print boot dev and swap flash flash chip selects if booted from 2nd
-	 * flash.  Swapping chip selects presents user with a common memory
-	 * map regardless of which flash was booted from.
-	 */
-	flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
-			CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS));
-	printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
-
-	if (flash_sel) {
-		set_lbc_br(0, CONFIG_SYS_BR1_PRELIM);
-		set_lbc_or(0, CONFIG_SYS_OR1_PRELIM);
-
-		set_lbc_br(1, CONFIG_SYS_BR0_PRELIM);
-		set_lbc_or(1, CONFIG_SYS_OR0_PRELIM);
-	}
-}
-
-int board_early_init_r(void)
-{
-	/* Initialize PCA9557 devices */
-	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
-	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
-	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0);
-	pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0);
-
-	flash_cs_fixup();
-
-	return 0;
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-#ifdef CONFIG_PCI
-	ft_board_pci_setup(blob, bd);
-#endif
-	ft_cpu_setup(blob, bd);
-}
-#endif
-
-#ifdef CONFIG_MP
-extern void cpu_mp_lmb_reserve(struct lmb *lmb);
-
-void board_lmb_reserve(struct lmb *lmb)
-{
-	cpu_mp_lmb_reserve(lmb);
-}
-#endif