PXA: Remove "wepep250" board

This board is broken and impossible to repair without deep knowledge or
availability of the hardware.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

1 files changed, 0 insertions, 145 deletions

diff --git a/board/wepep250/lowlevel_init.S b/board/wepep250/lowlevel_init.S
deleted file mode 100644
index 9bb091f..0000000
--- a/board/wepep250/lowlevel_init.S
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2001, 2002 ETC s.r.o.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- * 02111-1307, USA.
- *
- * Written by Marcel Telka <marcel@telka.sk>, 2001, 2002.
- * Changes for U-Boot Peter Figuli <peposh@etc.sk>, 2003.
- *
- * This file is taken from OpenWinCE project hosted by SourceForge.net
- *
- * Documentation:
- * [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors
- *     Developer's Manual", February 2002, Order Number: 278522-001
- * [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P",
- *     Revision 1.0, February 2002
- * [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)",
- *     Revision 1.0, February 2002
- *
-*/
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-.globl lowlevel_init
-lowlevel_init:
-
-	mov	r10, lr
-
-/*	setup memory - see 6.12 in [1]
- *	Step 1	- wait 200 us
- */
-	mov	r0,#0x2700			/* wait 200 us @ 99.5 MHz */
-1:	subs	r0, r0, #1
-	bne	1b
-/*	TODO: complete step 1 for Synchronous Static memory*/
-
-	ldr	r0, =0x48000000			/* MC_BASE */
-
-
-/*	step 1.a - setup MSCx
- */
-	ldr	r1, =0x000012B3			/* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */
-	str	r1, [r0, #0x8]			/* MSC0_OFFSET */
-
-/*	step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI
- *	see AUTO REFRESH chapter in section D. in [2] and in [3]
- *	DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633
- *	DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633
- *	TODO: complete for Synchronous Static memory
- */
-	ldr	r1, [r0, #4]			/* MDREFR_OFFSET */
-	ldr	r2, =0x01000FFF			/* MDREFR_K1FREE | MDREFR_DRI_MASK */
-	bic	r1, r1, r2
-#if defined( WEP_SDRAM_K4S281633 )
-	orr	r1, r1, #48			/* MDREFR_DRI(48) */
-#elif defined( WEP_SDRAM_K4S561633 )
-	orr	r1, r1, #24			/* MDREFR_DRI(24) */
-#else
-#error SDRAM chip is not defined
-#endif
-
-	str	r1, [r0, #4]			/* MDREFR_OFFSET */
-
-/*	Step 2 - only for Synchronous Static memory (TODO)
- *
- *	Step 3 - same as step 4
- *
- *	Step 4
- *
- *	Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2
- */
-	orr	r1, r1, #0x00010000		/* MDREFR_K1RUN */
-	bic	r1, r1, #0x00020000		/* MDREFR_K1DB2 */
-	str	r1, [r0, #4]			/* MDREFR_OFFSET */
-
-/*	Step 4.b - clear MDREFR:SLFRSH */
-	bic	r1, r1, #0x00400000		/* MDREFR_SLFRSH */
-	str	r1, [r0, #4]			/* MDREFR_OFFSET */
-
-/*	Step 4.c - set MDREFR:E1PIN */
-	orr	r1, r1, #0x00008000		/* MDREFR_E1PIN */
-	str	r1, [r0, #4]			/* MDREFR_OFFSET */
-
-/*	Step 4.d - automatically done
- *
- *	Steps 4.e and 4.f - configure SDRAM
- */
-#if defined( WEP_SDRAM_K4S281633 )
-	ldr	r1, =0x00000AA8			/* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */
-#elif defined( WEP_SDRAM_K4S561633 )
-	ldr	r1, =0x00000AC8			/* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */
-#else
-#error SDRAM chip is not defined
-#endif
-	str	r1, [r0, #0]			/* MDCNFG_OFFSET */
-
-/*	Step 5 - wait at least 200 us for SDRAM
- *	see section B. in [2]
- */
-	mov	r2,#0x2700			/* wait 200 us @ 99.5 MHz */
-1:	subs	r2, r2, #1
-	bne	1b
-
-/*	Step 6 - after reset dcache is disabled, so automatically done
- *
- *	Step 7 - eight refresh cycles
- */
-	mov	r2, #0xA0000000
-	ldr	r3, [r2]
-	ldr	r3, [r2]
-	ldr	r3, [r2]
-	ldr	r3, [r2]
-	ldr	r3, [r2]
-	ldr	r3, [r2]
-	ldr	r3, [r2]
-	ldr	r3, [r2]
-
-/*	Step 8 - we don't need dcache now
- *
- *	Step 9 - enable SDRAM partition 0
- */
-	orr	r1, r1, #1			/* MDCNFG_DE0 */
-	str	r1, [r0, #0]			/* MDCNFG_OFFSET */
-
-/*	Step 10 - write MDMRS */
-	mov	r1, #0
-	str	r1, [r0, #0x40]			/* MDMRS_OFFSET */
-
-/*	Step 11 - optional (TODO) */
-
-	mov	pc,r10